What is Wind Turbine Cable?

A comprehensive examination of medium and high voltage XLPE-insulated power cables engineered for wind energy applications. Covering cable construction types, material specifications, IEC compliance standards, and installation parameters for both onshore and offshore wind farm installations.

Wind turbine cables are specialized power transmission cables designed to operate within the demanding environment of wind energy generation systems. These cables form the critical electrical backbone connecting wind turbine generators to step-up transformers and ultimately to the electrical grid, enabling the efficient transmission of generated power under challenging operational conditions.
What is Wind Turbine Cable? Complete Technical Guide | Anhui Feichun Special Cable
Anhui Feichun Special Cable
安徽飞纯特种电缆有限公司
Renewable Energy Cable Solutions

What is Wind Turbine Cable?
Complete Technical Guide

A comprehensive examination of medium and high voltage XLPE-insulated power cables engineered for wind energy applications. Covering cable construction types, material specifications, IEC compliance standards, and installation parameters for both onshore and offshore wind farm installations.

IEC 60287 Current Capacity Calculation
IEC 60228 Conductor Specifications
IEC 60853 Cyclic Load Calculation
IEC 60949 Short Circuit Current
IEC 61443 Short Circuit Temperature
01

Definition & Purpose of Wind Turbine Cables

Wind turbine cables are specialized power transmission cables designed to operate within the demanding environment of wind energy generation systems. These cables form the critical electrical backbone connecting wind turbine generators to step-up transformers and ultimately to the electrical grid, enabling the efficient transmission of generated power under challenging operational conditions.

The primary purpose of wind turbine cables extends beyond simple power transmission. They must withstand continuous mechanical stress from nacelle rotation (typically ±3 full rotations or 1080°), accommodate temperature differentials ranging from -40°C to +90°C, resist moisture ingress in both onshore and offshore environments, and maintain consistent electrical performance throughout an expected service life of 25-30 years.

Modern wind turbine cables utilize cross-linked polyethylene (XLPE) insulation as the preferred dielectric material due to its superior thermal, electrical, and mechanical properties compared to traditional PVC or paper-based insulation systems. XLPE maintains stable dielectric characteristics across the entire operating temperature range while providing excellent resistance to water treeing and electrical stress.

“Cross-linked polyethylene has good mechanical properties and good resistance to abrasion coupled with excellent dielectric properties. Because of its elastomeric nature, it withstands high temperatures without melting or excessively deforming.”

The selection of appropriate cable constructions depends on multiple factors including voltage class, installation environment (indoor/outdoor, direct burial, ducted), mechanical protection requirements, and water-blocking specifications. High voltage cables are manufactured to customer specifications and comply with IEC standards that define calculation bases for current-carrying capacity, cyclic loading, and short-circuit conditions.

02

Cable Construction Types & Nomenclature

Wind turbine cables are manufactured in various construction configurations to meet specific application requirements. The cable designation system follows standardized nomenclature indicating conductor material, insulation type, screening method, and sheath composition. Understanding these designations is essential for proper cable selection and specification.

Figure 1: XRUHAKXS / XRUHKXS

NA2XS(FL)2Y / N2XS(FL)2Y — Longitudinally & Radially Sealed

  • 1 Aluminium or copper conductor
  • 2 Semi-conductive screen extruded on conductor
  • 3 XLPE insulation
  • 4 Semi-conductive screen extruded on insulation
  • 5 Semi-conductive water swelling tape wrap
  • 6 Metallic screen
  • 7 Semi-conductive water swelling tape wrap
  • 8 Longitudinal aluminium tape (PE copolymer coated)
  • 9 HDPE / MDPE outer sheath

Figure 2: YHAKXS / YHKXS

NA2XSY / N2XSY / NA2XS2Y / N2XS2Y / NA2XSH / N2XSH

  • 1 Aluminium or copper conductor
  • 2 Semi-conductive screen extruded on conductor
  • 3 XLPE insulation
  • 4 Semi-conductive screen extruded on insulation
  • 5 Wrapping of semi-conductive tape
  • 6 Metallic screen
  • 7 Wrapping of polyester tape
  • 8 Outer sheath: PVC, HDPE/MDPE, or LSOH

Figure 3: XUHAKXS / XUHKXS

NA2XS(F)2Y / N2XS(F)2Y / NA2XS(F)H / N2XS(F)H

  • 1 Aluminium or copper conductor
  • 2 Semi-conductive screen extruded on conductor
  • 3 XLPE insulation
  • 4 Semi-conductive screen extruded on insulation
  • 5 Semi-conductive water swelling tape wrap
  • 6 Metallic screen
  • 7 Non-conductive water swelling tape wrap
  • 8 Outer sheath: HDPE/MDPE or LSOH

“IEC 60228 specifies the nominal cross-sectional areas of conductors in electric power cables and cords across a wide range, from 0.5 mm² to 3,500 mm². This includes solid, stranded, and Milliken-type conductors made of copper, aluminium, and aluminium alloys.”

03

Cable Type Designation Reference

Single-Core XLPE Cable Designations

Complete nomenclature reference for wind turbine cable types with construction features

Local DesignationInternational DesignationConductorWater BlockingOuter SheathApplication
XRUHAKXSNA2XS(FL)2YAluminiumLongitudinal + RadialHDPE/MDPEDirect burial, wet locations
XRUHKXSN2XS(FL)2YCopperLongitudinal + RadialHDPE/MDPEDirect burial, wet locations
YHAKXSNA2XSYAluminiumNonePVCIndoor, dry locations
YHKXSN2XSYCopperNonePVCIndoor, dry locations
XHAKXSNA2XS2YAluminiumNoneHDPE/MDPEOutdoor, direct burial
XHKXSN2XS2YCopperNoneHDPE/MDPEOutdoor, direct burial
NHAKXSNA2XSHAluminiumNoneLSOHFire-sensitive areas
NHKXSN2XSHCopperNoneLSOHFire-sensitive areas
XUHAKXSNA2XS(F)2YAluminiumLongitudinal onlyHDPE/MDPEModerate wet conditions
XUHKXSN2XS(F)2YCopperLongitudinal onlyHDPE/MDPEModerate wet conditions
NUHAKXSNA2XS(F)HAluminiumLongitudinal onlyLSOHFire-sensitive, moderate wet
NUHKXSN2XS(F)HCopperLongitudinal onlyLSOHFire-sensitive, moderate wet

Note on Milliken Design Conductors: For cable conductors with cross-sections exceeding 1000 mm², Milliken design conductors are applied. This construction uses segmented conductors to reduce AC resistance losses caused by skin and proximity effects, improving current-carrying efficiency in high-capacity applications.

04

Installation Standards & Calculation Basis

IEC 60287

Calculation of current-carrying capacity of cables at 100% load factor. Defines thermal resistance models and derating factors for various installation conditions.

IEC 60853

Calculation of current-carrying capacity for cyclic load conditions or fault scenarios. Essential for wind applications with variable power generation.

IEC 60949

Calculation of maximum short-circuit current for cables. Determines conductor and screen sizing for fault protection requirements.

IEC 61443

Short-circuit temperature rating for cables above 30 kV. Specifies maximum permissible conductor temperatures during fault conditions.

IEC 60228

Conductors of wires and cables. Defines conductor classes (1-6), cross-sectional areas (0.5-3500 mm²), and maximum DC resistance values.

Specialized Software

Cable system simulation software used for complex installation scenarios, thermal analysis, and performance optimization.

Standard Installation Conditions

Reference parameters for current-carrying capacity calculations per IEC 60287

ParameterSoil InstallationAir InstallationUnit
Ambient/Ground Temperature2035°C
Burial Depth1.0—m
Soil Thermal Resistivity1.0—K·m/W
Phase Spacing2 × D2 × Dmm
Minimal Laying Temperature> 0°C (cable), > -5°C (environment)°C
Minimal Duct Inner Diameter1.5 × Dmm
Minimal Casing Pipe Diameter1.5 × D (minimum)mm

“IEC standards compliance ensures cables can withstand electrical, thermal, and mechanical stresses. Cables must undergo rigorous testing to verify their ability to maintain circuit integrity, providing reliable operation throughout their design life in demanding wind energy installations.”

05

Key Characteristics & Material Properties

XLPE Insulation Performance Comparison

Comparative analysis of insulation materials for wind turbine applications

PropertyXLPEPVCEPR/HEPRUnit
Maximum Operating Temperature907090°C
Short-Circuit Temperature (5s max)250160250°C
Emergency Overload Temperature130—130°C
Minimum Installation Temperature-400-40°C
Dielectric Constant (εr)2.34.0–8.02.5–3.5—
Water Tree ResistanceExcellentModerateGood—
Expected Service Life>4020–2530–40years

Water-Blocking Technology

Semi-conductive and non-conductive water-swelling tapes prevent longitudinal water migration. Aluminium laminate tape with PE copolymer coating provides radial moisture barrier.

Semi-Conductive Screens

Triple extrusion process bonds conductor and insulation screens to XLPE. Ensures uniform electric field distribution and eliminates partial discharge at interfaces.

Sheath Options

PVC for general indoor use; HDPE/MDPE for direct burial and UV resistance; LSOH (Low Smoke Zero Halogen) for fire-sensitive installations with reduced toxic emissions.

Metallic Screening

Copper wire or tape screen provides electromagnetic shielding and fault current path. Screen cross-section sized according to short-circuit capacity requirements per IEC 60949.

06

Wind Energy Applications

🌊
Offshore Wind Farms

Inter-array cables, export cables, J-tube installations

🏔️
Onshore Wind Parks

Tower cables, collection systems, substation feeders

⚡
Turbine Internal

Generator connections, nacelle power circuits

🔌
Grid Connection

Transformer links, substation interconnects

Specialized Cable Solutions for Industrial Applications

For comprehensive industrial cable solutions including reeling cables, festoon cables, and specialized port machinery applications, our partner site provides extensive technical resources and product specifications for demanding operational environments.

Explore Industrial Cable Solutions at CraneCable.com

Contact Our Engineering Team

Anhui Feichun Special Cable Co., Ltd. — Professional Wind Energy Cable Solutions

WhatsApp

+86 138 5512 3218

Instant messaging support

Technical Support

[email protected]

Engineering consultation

Sales Representative

[email protected]

Quotations & project support

Export Department

[email protected]

International inquiries

Previous Article

Wind Turbine Medium Voltage XLPE Power Cables12/20 (24) kV — Longitudinally & Radially Sealed

Next Article

HIGH-VOLTAGE XLPE POWER CABLE S36/60÷69(72.5) kV

Write a Comment

Leave a Comment

您的邮箱地址不会被公开。 必填项已用 * 标注