什麼是 PROTOMONT(MSR) 2YSLGCGOEU 250/250V 礦用控制信號電纜？
What is PROTOMONT(MSR) 2YSLGCGOEU 250/250V Control & Signaling Cable?
什麼是 PROTOMONT(MSR) 2YSLGCGOEU 250/250V 礦用控制信號電纜？
1. Product Overview / 產品概述
The PROTOMONT(MSR) 2YSLGCGOEU 250/250V represents a specialized category of control, signaling, and bus cables engineered specifically for electrical and electronic equipment in mining installations. As documented in professional mining cable resources[1], these cables feature the transmission characteristics necessary for measured value processing, process data handling, and automation units in demanding open-cast mining applications.
The “MSR” designation stands for “Mess-, Steuer- und Regelungstechnik” (Measurement, Control and Regulation Technology), indicating the cable’s primary application in industrial control systems. Manufactured in accordance with DIN VDE 0250-1 standards, the 2YSLGCGOEU series is specifically suitable for laying alongside conveyor belts and on material handling equipment in both open-cast and underground mining environments.
產品概述
PROTOMONT(MSR) 2YSLGCGOEU 250/250V 代表了專為礦山設施中電氣和電子設備而設計的控制、信號和總線電纜的專業類別。根據專業礦用電纜資源文獻[1]，這些電纜具有用於測量值處理、過程數據處理和自動化單元的必要傳輸特性，適用於嚴苛的露天採礦應用。
“MSR” 標識代表 “Mess-, Steuer- und Regelungstechnik”（測量、控制和調節技術），表明該電纜在工業控制系統中的主要應用。按照 DIN VDE 0250-1 標準製造，2YSLGCGOEU 系列特別適用於沿輸送帶敷設以及在露天和地下採礦環境中的物料搬運設備上使用。
2. Cable Designation Decoding / 電纜型號解析
The designation “2YSLGCGOEU” follows German cable coding conventions and provides detailed information about the cable’s construction and transmission characteristics:
| Code 代碼 | Meaning (EN) | 含義 (繁中) | Technical Significance |
|---|---|---|---|
| 2Y | Polyethylene (PE) insulated | 聚乙烯（PE）絕緣 | Excellent dielectric properties |
| S | Braided screen | 編織屏蔽 | EMC protection, signal integrity |
| L | Bare copper conductor | 裸銅導體 | Class 5 finely stranded |
| G | Rubber inner sheath | 橡膠內護套 | Polychloroprene (PCP) |
| C | Copper screen | 銅屏蔽 | Tinned copper braid |
| G | Rubber compound layer | 橡膠化合物層 | Mechanical protection |
| O | Oil resistant outer sheath | 耐油外護套 | CPE special compound |
| EU | European standard / external use | 歐洲標準/外部使用 | Outdoor mining applications |
“PROTOMONT” 是該電纜系列的商標名稱，在礦業領域代表高品質和可靠性。”(MSR)” 表示測量、控制和調節技術應用，這是現代自動化採礦作業中至關重要的功能類別。
3. Electrical Parameters / 電氣參數
The electrical specifications of PROTOMONT(MSR) 2YSLGCGOEU are optimized for low-voltage control and signal transmission applications, providing reliable communication for automation systems in mining installations.
電氣參數說明
PROTOMONT(MSR) 2YSLGCGOEU 的電氣規格針對低壓控制和信號傳輸應用進行了優化，為礦山設施中的自動化系統提供可靠的通信。250/250V 的電壓額定值符合工業控制系統的標準要求，而 350V DC 的最大電壓確保在直流應用中具有足夠的安全裕度。聚乙烯（PE）絕緣提供了維持控制和總線通信系統信號完整性所必需的優良介電特性。
4. Thermal Performance Specifications / 熱性能規格
The thermal characteristics of PROTOMONT(MSR) 2YSLGCGOEU accommodate the demanding temperature conditions encountered in mining environments, from arctic surface operations to underground heat zones.
| Parameter 參數 | Value 數值 | Unit 單位 | Application Notes 應用說明 |
|---|---|---|---|
| Max. Conductor Temperature 最大導體溫度 | 60 | °C | Continuous operation 連續運行 |
| Short Circuit Temperature 短路溫度 | 150 | °C | Maximum fault condition 最大故障條件 |
| Fixed Installation Ambient (Min) 固定安裝環境溫度（最低） | -40 | °C | Arctic climate operations 極寒氣候作業 |
| Fixed Installation Ambient (Max) 固定安裝環境溫度（最高） | +60 | °C | High-temperature zones 高溫區域 |
| Flexible Installation Ambient (Min) 柔性安裝環境溫度（最低） | -25 | °C | Dynamic applications 動態應用 |
| Flexible Installation Ambient (Max) 柔性安裝環境溫度（最高） | +60 | °C | Moving equipment 移動設備 |
熱性能規格說明
PROTOMONT(MSR) 2YSLGCGOEU 的熱特性適應礦山環境中遇到的苛刻溫度條件，從北極地表作業到地下高溫區域。-40°C 至 +60°C 的寬廣環境溫度範圍確保電纜能在全球大多數採礦條件下可靠運行。PE 絕緣材料的 60°C 最高導體溫度足以滿足控制和信號電纜的典型低功率應用。
5. Cable Construction Details / 電纜結構詳情
The sophisticated paired construction of PROTOMONT(MSR) 2YSLGCGOEU is specifically designed for optimal signal transmission characteristics, with cores laid-up in pairs in layers to minimize crosstalk and electromagnetic interference.
| Layer 層級 | Material 材料 | Function (EN) | 功能 (繁中) |
|---|---|---|---|
| Conductor 導體 | Finely stranded copper, bare, Class 5 | Signal transmission, flexibility | 信號傳輸、柔性 |
| Core Insulation 芯線絕緣 | Polyethylene (PE) | Dielectric strength, signal integrity | 介電強度、信號完整性 |
| Core Assembly 芯線組裝 | Paired layers with non-hygroscopic serving | Reduced crosstalk, moisture protection | 降低串擾、防潮保護 |
| Core Identification 芯線標識 | White with black digits imprinted | Easy identification during installation | 安裝時易於識別 |
| Inner Sheath 內護套 | Rubber – Polychloroprene (PCP) | Mechanical protection, flexibility | 機械保護、柔性 |
| Screen 屏蔽層 | Tinned copper braid | EMC protection, ground continuity | 電磁兼容保護、接地連續性 |
| Outer Sheath 外護套 | Chlorinated polyethylene (CM/CPE) – Special compound | Oil, ozone, UV resistance | 耐油、耐臭氧、抗紫外線 |
Paired Construction Advantage 成對結構優勢
The paired core configuration (n×2×1.5 mm²) is essential for differential signal transmission commonly used in industrial bus systems such as RS-485, PROFIBUS, and other field communication protocols. Paired construction provides inherent noise immunity through common-mode rejection, critical in mining environments where large motors and power equipment generate significant electromagnetic interference.
電纜結構詳情
PROTOMONT(MSR) 2YSLGCGOEU 的精密成對結構專為最佳信號傳輸特性而設計，芯線成對分層排列以最大限度地減少串擾和電磁干擾。成對芯線配置（n×2×1.5 mm²）對於工業總線系統（如 RS-485、PROFIBUS 和其他現場通信協議）中常用的差分信號傳輸至關重要。成對結構通過共模抑制提供固有的抗噪聲能力，這在大型電機和電力設備產生顯著電磁干擾的採礦環境中至關重要。
6. Environmental Resistance Properties / 環境耐受性能
PROTOMONT(MSR) 2YSLGCGOEU demonstrates comprehensive environmental resistance characteristics essential for reliable long-term operation in harsh mining conditions where exposure to hydraulic fluids, sunlight, and atmospheric oxidants is unavoidable.
- Oil Resistant 耐油: CPE outer sheath resists hydraulic fluids and petroleum products per IEC 60811-404
- Ozone Resistant 耐臭氧: Long-term outdoor exposure capability without cracking
- UV Resistant 抗紫外線: Surface installation in direct sunlight applications
- Flame Retardant 阻燃: EN/IEC 60332-1-2 single cable vertical flame test
- EMC Shielded 電磁屏蔽: Tinned copper braid for superior interference rejection
- Non-Hygroscopic 非吸濕: Moisture-resistant core serving material
環境耐受性能說明
PROTOMONT(MSR) 2YSLGCGOEU 展現出全面的環境耐受特性，對於在不可避免接觸液壓油、陽光和大氣氧化劑的惡劣採礦條件下長期可靠運行至關重要。特種 CPE 化合物外護套提供三重保護：耐油性、耐臭氧性和抗紫外線性能。鍍錫銅編織屏蔽確保在採礦設備產生的強電磁場環境中保持信號完整性。
7. Product Specifications Table / 產品規格表
The following table presents available configurations for the PROTOMONT(MSR) 2YSLGCGOEU 250/250V series. All configurations feature 1.5 mm² conductor cross-section with varying pair counts to accommodate different automation system requirements.
| Construction 結構 | Pairs 對數 | Conductor Ø (mm) | Cable Ø Min (mm) | Cable Ø Max (mm) | Weight (kg/km) 重量 | Typical Application 典型應用 |
|---|---|---|---|---|---|---|
| 2×2×1.5 mm² | 2 | 1.24 | 11.0 | 13.0 | 240 | Simple point-to-point 簡單點對點 |
| 5×2×1.5 mm² | 5 | 1.24 | 16.5 | 18.1 | 450 | Small control panel 小型控制面板 |
| 10×2×1.5 mm² | 10 | 1.24 | 20.5 | 22.2 | 630 | Medium automation 中等自動化 |
| 20×2×1.5 mm² | 20 | 1.24 | 25.1 | 28.1 | 960 | Complex systems 複雜系統 |
產品規格說明
上表展示了 PROTOMONT(MSR) 2YSLGCGOEU 250/250V 系列的可用配置。所有配置均採用 1.5 mm² 導體截面積，具有不同的對數以適應不同的自動化系統要求。從 2 對到 20 對的範圍涵蓋了從簡單點對點連接到複雜多通道控制系統的各種應用需求。1.24 mm 的導體直徑確保與標準工業連接器可靠端接。
8. Application Scenarios / 應用場景
PROTOMONT(MSR) 2YSLGCGOEU cables are specifically designed for data, signal, and control applications in mining installations. As documented in mining cable industry resources[2], these cables excel in automation and process control systems where reliable data transmission is critical for operational safety and efficiency.
Primary Applications 主要應用
- Process Data Processing 過程數據處理: SCADA systems, PLC interconnections, process monitoring
- Automation Units 自動化單元: Conveyor control, crusher automation, material handling
- Measured Value Processing 測量值處理: Sensors, transducers, instrumentation signals
- Conveyor Belt Systems 輸送帶系統: Along-belt installation, speed/position sensing
- Material Handling Equipment 物料搬運設備: Stackers, reclaimers, transfer points
- Industrial Bus Systems 工業總線系統: PROFIBUS, RS-485, fieldbus networks
應用場景說明
PROTOMONT(MSR) 2YSLGCGOEU 電纜專為礦山設施中的數據、信號和控制應用而設計。根據礦用電纜行業資源[2]，這些電纜在自動化和過程控制系統中表現出色，在這些系統中可靠的數據傳輸對運營安全和效率至關重要。成對結構使其特別適用於需要差分信號傳輸的工業總線協議，如 PROFIBUS 和 RS-485。
9. Certifications & Applicable Standards / 認證與適用標準
Compliance with international standards ensures PROTOMONT(MSR) 2YSLGCGOEU meets the stringent requirements for control and signaling cables in mining automation applications.
| Standard 標準 | Description 描述 | Scope 範圍 |
|---|---|---|
| DIN VDE 0250-1 | Power installation cables and wires | Primary design basis 主要設計依據 |
| DIN EN 60228 / IEC 60228 | Conductors of insulated cables | Class 5 conductor requirements 導體要求 |
| DIN EN 60332-1-2 / IEC 60332-1-2 | Single cable vertical flame test | Fire safety compliance 防火安全合規 |
| DIN EN 60811-404 / IEC 60811-404 | Oil resistance test methods | Chemical resistance 耐化學 |
認證說明
符合國際標準確保 PROTOMONT(MSR) 2YSLGCGOEU 滿足礦山自動化應用中控制和信號電纜的嚴格要求。DIN VDE 0250-1 作為主要設計依據，涵蓋了電力安裝電纜和導線的基本要求。IEC 60228 Class 5 導體標準確保優異的柔性，而 IEC 60332-1-2 和 IEC 60811-404 分別驗證防火安全和耐油性能。
10. Why Choose Anhui Feichun Special Cable / 為何選擇安徽飛純特種電纜
Anhui Feichun Special Cable Co., Ltd. (安徽飛純特種電纜有限公司) integrates precision manufacturing with rigorous quality assurance to deliver premium control and signaling cables for mining automation. As recognized by professional mining cable industry resources, specialized MSR cable solutions require deep expertise in both signal transmission engineering and mining electrical systems—capabilities that Feichun has consistently demonstrated in automation projects worldwide.
- Manufacturing Excellence 製造卓越: Precision paired core construction for optimal signal transmission
- Quality Testing 品質測試: Comprehensive EMC and transmission testing per IEC standards
- Global Supply 全球供應: Export capability to mining automation projects worldwide
- Custom Engineering 定制工程: Tailored pair counts and configurations for specific automation requirements
- Signal Integrity 信號完整性: Optimized for industrial bus protocols and SCADA systems
- Rapid Deployment 快速交付: Strategic inventory for common configurations
選擇飛純的理由
安徽飛純特種電纜有限公司整合精密製造與嚴格品質保證，為礦山自動化提供優質控制和信號電纜。正如專業礦用電纜行業資源所認可，專業 MSR 電纜解決方案需要在信號傳輸工程和礦山電氣系統兩方面都具備深厚專業知識——這些正是飛純在全球自動化項目中持續展現的核心能力。
References & Citations / 參考文獻與引用
- [1] PROTOMONT MSR Flexible Data, Signal and Control Cables for Mining Installations – Technical Documentation. Reeling Cable Technical Resources
- [2] DIN VDE 0250-1: Power installation cables and wires – General requirements. VDE Standards
- [3] IEC 60228 / DIN EN 60228: Conductors of insulated cables – Class 5 flexible conductors. IEC Standards
- [4] IEC 60332-1-2: Tests on electric cables under fire conditions – Vertical flame propagation test. IEC Standards
- [5] IEC 60811-404: Non-electrical tests – Oil resistance test methods for sheathing materials. IEC Standards
![PROTOMONT TBM (N)TSCGECWOEU 6/10KV represents the pinnacle of medium voltage reeling cable technology specifically engineered for Tunnel Boring Machines (TBMs). As documented in professional reeling cable technical resources[1], these specialized cables serve as the critical power supply lifeline for TBM operations in underground mines and tunnel construction sites, enabling continuous boring operations while accommodating the machine's forward progression through the cable reeling system.](https://feichuncables.com/blog/wp-content/uploads/image-342-400x225.avif "What is PROTOMONT TBM (N)TSCGECWOEU 6/10KV TBM Reeling Cable? 2")
