[email protected]

Fire Resistant Cable

2 Min Read
H07BN4-F HAR Nomenclature Breakdown (per CEI 20-20/20-19): H = Harmonized standard designation (IEC 60227 compliance) Indicates cable meets international safety standards Full compatibility with European electrical regulations 07 = Voltage designation (Uo/U = 450/750V) 07 = 450/750V nominal voltage class (other classes: 03 = 300/500V, 04 = 400/690V) Testing: 3 kV test voltage (10 times nominal) B = Special feature (Flexible/Benign environment) B typically indicates bare or flexible conductor design (Standard = no letter designation) N = Rubber type designation N = Normally-proportioned sheath thickness (S = Slim/reduced, T = Thick/reinforced) For H07BN4-F: N = Standard thickness for 450/750V industrial use Insulation thickness: 1.2 mm per DIN VDE 0282 Sheath thickness: 1.0–1.5 mm per DIN VDE 0293 4 = Number of principal tests/features Typically indicates: (1) Temperature range, (2) Insulation type, (3) Sheath composition, (4) Mechanical properties certification F = Flexibility designation F = Fully flexible (can be wound on reels) (Other: S = Service-cord, C = Cable) H07BN4-F can be: Coiled on reel: Yes (reelable) Bent radius: Down to 4×D (normal use) to 2×D (close to terminal) Repeated winding: Yes (drum rating available) Continuous flexing: Yes (up to 50+ million cycles per EN 50266) HAR = Harmonics-compatible technology designation HAR = High-frequency harmonic and transient rated Specifically designed for: - VFD (variable frequency drive) motor circuits (up to 20 kHz switching) - Welding equipment (high current transients, multi-frequency content) - Industrial power electronics environments (distorted waveforms) HAR testing per EN 50334: Transient overvoltage withstand: 3× nominal voltage, sustained Harmonic content up to 50th harmonic: Fully rated Dv/dt immunity: >3 kV/µs (fast switching events) Comparison: Standard vs. HAR designation Standard H07BN4-F (without HAR): Frequency: Single 50/60 Hz only Total harmonic distortion (THD) limit: 20% acceptable (VFD typical) Transient immunity: Enhanced (3+ kV nominal test) Suitable for: VFD motors, welding, power electronics Cost: +8–12% premium over standard Application advantage: Single cable type serves both conventional and VFD circuits
Technical Department
on22/06/2026

集齐 VDE、CE、UKCA、EAC！飞纯 H07BN4-F 欧标风电扭缆开启全球通关模式

风电项目正在从单一区域交付走向全球化配套。对风机制造商、EPC、设备集成商和出口项目来说，电缆不仅要能承受塔筒扭转、机舱振动、低温环境和长期运行，更要具备清晰的认证文件与市场准入能力。飞纯 H07BN4-F 欧标风电扭缆集齐 VDE、CE、UKCA、EAC 多重认证，为风电设备出口、海外项目投标和多区域交付提供更高效的合规支撑。
3 Min Read
Large three-phase AC motors drove continuous-duty equipment (conveyor systems, pump stations, ventilation fans) with straightforward on/off control via contactor switches. The control circuits were simple, the equipment was robust and forgiving of electrical noise, and cable specifications focused purely on mechanical durability and basic electrical protection. Modern underground mining operations operate in a fundamentally different electrical environment. Variable frequency drives (VFDs) regulate motor speeds to match load requirements, reducing energy consumption and extending equipment life. Programmable logic controllers (PLCs) and distributed control systems (DCS) automate equipment sequencing and mine ventilation. Wireless monitoring systems track equipment health, environmental conditions, and safety parameters. The mine's electrical environment has become as electrically complex as an industrial manufacturing facility, except that everything must operate underground in the presence of conductive dust, moisture, and metallic ore particles that create unintended current paths and electromagnetic noise sources.
Technical Department
on22/06/2026

零下40℃也能高效防火？飞纯风力发电专用电缆通过俄罗斯 FSC 安全认证

严寒地区的风力发电项目通常位于高纬度、高海拔、草原、山地、海岸或开阔荒漠。风机长期暴露在低温、强风、冰雪、紫外线和温差循环中，塔筒内部还存在扭转、振动、摆动和持续运行带来的电缆疲劳。对于风电电缆而言，零下 40℃ 环境下仍能保持稳定运行，需要的不只是材料“不会冻裂”，而是电气、机械和消防性能在低温条件下保持协同。 飞纯风力发电专用电缆面向这种严苛工况，通过俄罗斯 FSC 安全认证，形成“低温可靠 + 防火合规 + 风机动态适配”的产品价值。对于寒区风电场、俄罗斯风电项目、北方高寒区域和出口风机配套项目，这种认证和性能组合具有很强的工程意义。
10 Min Read
BFOU 0.6/1kV P5/P12 fire-resistant offshore power cable with 3 × 95 mm² tinned copper conductors is approximately 45 mm (1.77 inches), with a standard tolerance window of ±2.0 mm producing a permissible range of 43.0–47.0 mm. This specification is critical for cable gland selection because offshore and marine cable glands are manufactured with specific bore diameters engineered to accommodate this dimensional range. The approximate total weight of this cable is 4,950 kg/km (3,330 lbs/1000 ft), with copper content approximately 3,350 kg/km. It features three 95 mm² Class 2 tinned copper main power conductors, a halogen-free EPR insulation system, a critical mica tape fire-resistance layer rated for 830°C continuous operation (IEC 60331 certified), tinned copper wire braid armor providing mechanical protection and electromagnetic shielding, and an SHF2 halogen-free thermosetting outer sheath rated for extreme marine and subsea conditions.
Technical Department
on27/02/2026

Cable Gland Sizing: Finding the OD Tolerance for BFOU 0.6/1kV P5/P12 3×95 mm² Offshore Power Cable

BFOU 0.6/1kV P5/P12 fire-resistant offshore power cable with 3 × 95 mm² tinned copper conductors is approximately 45 mm (1.77 inches), with a standard tolerance window of ±2.0 mm producing a permissible range of 43.0–47.0 mm. This specification is critical for cable gland selection because offshore and marine cable glands are manufactured with specific bore diameters engineered to accommodate this dimensional range. The approximate total weight of this cable is 4,950 kg/km (3,330 lbs/1000 ft), with copper content approximately 3,350 kg/km. It features three 95 mm² Class 2 tinned copper main power conductors, a halogen-free EPR insulation system, a critical mica tape fire-resistance layer rated for 830°C continuous operation (IEC 60331 certified), tinned copper wire braid armor providing mechanical protection and electromagnetic shielding, and an SHF2 halogen-free thermosetting outer sheath rated for extreme marine and subsea conditions.
15 Min Read
The designation BFOU(c) is not arbitrary—it is a highly structured labeling system derived from the NEK 606 Norwegian marine standard that encodes critical information about the cable's construction, safety properties, and intended application. By understanding what each letter represents, you gain immediate insight into the cable's fundamental characteristics and whether it is suitable for your specific marine environment. BFOU(c) 代号是从 NEK 606 挪威海洋标准派生的高度结构化标签系统，编码了电缆的关键安全特性和预期应用。
Technical Department
on26/02/2026

Datasheet & Specs: Technical Specifications for BFOU(c) 150/250V S4/S8 4x2x1.5 mm² Marine Instrumentation Cable

The designation BFOU(c) is not arbitrary—it is a highly structured labeling system derived from the NEK 606 Norwegian marine standard that encodes critical information about the cable’s construction, safety properties, and intended application. By understanding what each letter represents, you gain immediate insight into the cable’s fundamental characteristics and whether it is suitable for your specific marine environment. BFOU(c) 代号是从 NEK 606 挪威海洋标准派生的高度结构化标签系统，编码了电缆的关键安全特性和预期应用。
9 Min Read
The European and American approaches to cable engineering reflect fundamentally different environmental threat models. BFOU cables manufactured to NEK 606 specifications incorporate halogen-free insulation, SHF2 H-M compound sheathing, and mica glass tape (MGT) as a fire barrier, enabling uninterrupted power delivery during fire situations in accordance with IEC 60331-21. This design prioritizes survival of critical systems during extreme thermal events—a recognized hazard in confined spaces such as engine rooms and living quarters aboard offshore vessels.
Technical Department
on25/02/2026

Why Your BFOU Cable Needs a Type N Jacket Upgrade?

The European and American approaches to cable engineering reflect fundamentally different environmental threat models. BFOU cables manufactured to NEK 606 specifications incorporate halogen-free insulation, SHF2 H-M compound sheathing, and mica glass tape (MGT) as a fire barrier, enabling uninterrupted power delivery during fire situations in accordance with IEC 60331-21. This design prioritizes survival of critical systems during extreme thermal events—a recognized hazard in confined spaces such as engine rooms and living quarters aboard offshore vessels.
5 Min Read
Two major cable standards dominate the offshore drilling, marine platform and demanding industrial environments: NEK 606 RFOU and IEEE 1580 Type P. Understanding which standard suits your application is critical for equipment reliability and operational safety. NEK 606 represents the European approach to zero-halogen, low-smoke construction with rigorous mud resistance requirements, while IEEE 1580 Type P emphasises extreme flexibility, mechanical durability and elevated temperature tolerance favoured in North American operations.
Technical Department
on25/02/2026

NEK 606 RFOU vs IEEE 1580 Type P: Which Mud Resistant Cable is Best for Top Drives?

Two major cable standards dominate the offshore drilling, marine platform and demanding industrial environments: NEK 606 RFOU and IEEE 1580 Type P. Understanding which standard suits your application is critical for equipment reliability and operational safety. NEK 606 represents the European approach to zero-halogen, low-smoke construction with rigorous mud resistance requirements, while IEEE 1580 Type P emphasises extreme flexibility, mechanical durability and elevated temperature tolerance favoured in North American operations.
11 Min Read
AusProof has been designing and manufacturing electrical cable couplers for mining and tunneling operations since 1974, establishing themselves as industry leaders in high voltage connection technology. Their coupler systems are specifically engineered to provide safe, reliable power connections in demanding environments including underground coal mines, metalliferous mines, open-cut operations, and tunnel excavation projects. The genderless design and full phase-to-earth segregation features make AusProof couplers among the safest and most reliable high voltage connectors available globally. (AusProof自1974年以来一直为采矿和隧道作业设计和制造电缆联接器，确立了自己在高压连接技术方面的行业领导地位。他们的联接器系统专门设计用于在要求苛刻的环境中提供安全、可靠的电力连接，包括地下煤矿、金属矿、露天作业和隧道挖掘项目。无性别设计和完整的相对地隔离功能使AusProof联接器成为全球最安全、最可靠的高压连接器之一。)
Technical Department
on06/02/2026

AusProof Couplers: Cable Stripping Dimensions 

AusProof has been designing and manufacturing electrical cable couplers for mining and tunneling operations since 1974, establishing themselves as industry leaders in high voltage connection technology. Their coupler systems are specifically engineered to provide safe, reliable power connections in demanding environments including underground coal mines, metalliferous mines, open-cut operations, and tunnel excavation projects. The genderless design and full phase-to-earth segregation features make AusProof couplers among the safest and most reliable high voltage connectors available globally. (AusProof自1974年以来一直为采矿和隧道作业设计和制造电缆联接器，确立了自己在高压连接技术方面的行业领导地位。他们的联接器系统专门设计用于在要求苛刻的环境中提供安全、可靠的电力连接，包括地下煤矿、金属矿、露天作业和隧道挖掘项目。无性别设计和完整的相对地隔离功能使AusProof联接器成为全球最安全、最可靠的高压连接器之一。)
10 Min Read
The selection of appropriate submersible pump cables for acidic mine water dewatering applications represents a critical engineering decision that directly impacts operational safety, equipment longevity, and maintenance costs. While Type 441 cables may appear suitable for general submersible pump applications, the harsh chemical environment of acidic mine water typically necessitates the use of specialized EPR (Ethylene Propylene Rubber) or CSP (Chlorosulfonated Polyethylene) insulated cables specifically engineered for corrosive conditions. 为酸性矿井水脱水应用选择合适的潜水泵电缆是一项关键的工程决策，直接影响运行安全、设备寿命和维护成本。虽然441型电缆可能适用于一般潜水泵应用，但酸性矿井水的恶劣化学环境通常需要使用专门设计用于腐蚀性条件的EPR（乙丙橡胶）或CSP（氯磺化聚乙烯）绝缘电缆。
Technical Department
on05/02/2026

TUNNELFLEX-R-PUR HF with Antitwisting Protection 1 KV

TUNNELFLEX-R-PUR HF represents a specialized category of halogen-free, flame-retardant flexible power cables engineered specifically for the demanding requirements of underground mining and tunneling operations. This cable combines advanced polyurethane (PUR) sheathing technology with integrated antitwisting protection to deliver exceptional mechanical durability, environmental resistance, and most importantly, enhanced safety through its halogen-free construction that significantly reduces toxic gas emissions during fire incidents. TUNNELFLEX-R-PUR HF电缆是专为地下采矿和隧道作业的苛刻要求而设计的无卤阻燃柔性电力电缆。该电缆结合了先进的聚氨酯护套技术和集成的防扭转保护，提供卓越的机械耐久性、环境抵抗力，以及通过无卤结构在火灾事故中显著减少有毒气体排放的增强安全性。
9 Min Read
Shipwiring and offshore platform cables represent a specialized category of marine cables designed to perform reliably in the most demanding environments on earth—at sea. These cables must withstand extreme temperature variations (from Arctic cold to engine room heat), constant exposure to humidity, salt water, oils, acids, and drilling muds, while maintaining electrical integrity for power, control, signal, instrumentation, and communication applications. The primary international standards governing these cables include NEK 606 (Norwegian standard for offshore floating platforms), IEC 60092 (electrical installations in ships), BS 6883 (fixed wiring in offshore units), and BS 7917 (fire resistant cables for offshore applications).
Technical Department
on05/01/2026

What are Shipwiring & Offshore Platform Cables?

NEK 606 cable, BFOU cable, RFOU cable, NEK 606 BFOU, NEK 606 RFOU, offshore platform cable, MUD resistant cable, Norwegian offshore cable, floating platform cable, FPSO cable, marine cable, offshore cable, shipwiring cable, ship cable, offshore platform cable, marine power cable, ship electrical cable, naval cable, maritime cable, at-sea cable,RFOU P101, BFOU P105, RFOU S101, RFOU S102, BFOU S103, BFOU S104, UX P108, RFOU P102, RFOU P103, RFOU P104, RFOU P112, RFOU P113
6 Min Read
UNE 21123 standard refers to the design and cross-sectional area specifications for cables used by utilities on power distribution circuits with voltage ratings up to and including 600/1000V (0.6/1kV). UNE standards are released by AENOR (Asociación Española de Normalización y Certificación), the Spanish Association for Standardisation and Certification. As AENOR is a member of ISO, IEC, and CENELEC, many of its standards are harmonized with European and international conventions.
Technical Department
on04/01/2026

What is UNE 21123 Cable?

UNE 21123 standard refers to the design and cross-sectional area specifications for cables used by utilities on power distribution circuits with voltage ratings up to and including 600/1000V (0.6/1kV). UNE standards are released by AENOR (Asociación Española de Normalización y Certificación), the Spanish Association for Standardisation and Certification. As AENOR is a member of ISO, IEC, and CENELEC, many of its standards are harmonized with European and international conventions.
8 Min Read
NEK TS 606 is the Norwegian offshore industry technical specification (TS) covering a range of power, instrumentation and earth cables that are halogen free and/or MUD resistant, protecting them against the type of hydrocarbon-laden drilling liquid used in drilling operations which can have an adverse effect on cable sheathing materials. Originally published in 1993 by the Norwegian Electrotechnical Committee (NEK) as a successor to the 'Recommended Practice for Specification of Cables' of the Norwegian Oil Industry Association, NEK 606 has evolved to become an internationally accepted standard for offshore cable applications.
Technical Department
on04/01/2026

What is NEK 606 Cable?

NEK 606, NEK TS 606, NEK 606 cable, offshore cable, BFOU cable, RFOU cable, Norwegian offshore standard, oil gas cable, mud resistant cable, fire resistant cable, halogen free cable, offshore power cable, offshore instrumentation cable, marine cable
7 Min Read
Germany's standards agency DIN VDE originally set the parameters for circuit integrity for cables, wires, and flexible cords in the event of a fire in standard DIN VDE 0472. While this standard has now been superseded by German standard DIN VDE 0482, it remains widely referred to across the cable industry for fire performance testing and continues to be an important reference for specifying fire-resistant cables.
Technical Department
on31/12/2025

What is DIN VDE 0472 Cable?

DIN VDE 0472 cable, VDE 0472 cable, VDE 0482 cable, fire resistant cable,FE60 cable, FE60 fire cable, 60 minute fire resistant cable FE90 cable, FE90 fire cable, 90 minute fire resistant cable FE120 cable, FE120 fire cable, 120 minute fire resistant cable FE180 cable, FE180 fire cable, 180 minute fire resistant cable flame exposure duration, fire resistance duration circuit integrity duration, insulation integrity, fire performance cable, circuit integrity cable, FE60 cable, FE90 cable, FE120 cable, FE180 cable, NHXH cable, NHXCH cable, flame retardant cable, LSZH fire cable, German fire cable standard, DIN VDE 0472, DIN VDE 0482, VDE 0472-804B, VDE 0472-804C, VDE 0472-813, VDE 0472-814, VDE 0472-815, VDE 0472-816, IEC 60331, IEC 60332, IEC 60332-1, IEC 60332-3, IEC 60754-2, IEC 61034-1, BS 6387, BS 6387 Cat C, DIN 4102-12, DIN EN 60332-1, DIN EN 60332-3, DIN EN 60754-2, DIN EN 61034-1, VDE 0482-332-1, VDE 0482-332-3, VDE 0482-754-3, VDE 0482-1034-1, HD 604 S1, DIN VDE 0266
8 Min Read
EN 50288-7 instrumentation cables are multi-element metallic cables used in analogue and digital communication and control applications. Manufactured in accordance with European Standard EN 50288 (British Standard BS EN 50288), these cables are widely used in processing plants such as those found in the petrochemical industry due to their ability to withstand electromagnetic interference (EMI). They are specifically designed for the transmission of signals in instrumentation, control, and communication applications, commonly available in 300V and 500V voltage ratings.
Technical Department
on31/12/2025

What is EN 50288-7 Cable?

EN 50288-7 cable, BS EN 50288-7, instrumentation cable, control cable, RE-2X(st)H cable, RE-2X(st)Y cable, RE-2Y(st)Y cable, PiMF cable, TiMF cable, screened cable, petrochemical cable, XLPE instrumentation cable, LSZH instrumentation cable
16 Min Read
DNV (Det Norske Veritas) is an international accredited registrar and classification society headquartered in Høvik, Norway. As one of the world's leading classification societies, DNV provides certification, verification, and risk management services for the maritime, oil & gas, renewable energy, and other industries. DNV approved cables are electrical cables that have been tested, verified, and certified by DNV to meet stringent safety, quality, and performance standards for use in marine and offshore applications.
Technical Department
on30/12/2025

What is DNV Approved Cable?

offshore platform cable, drilling platform cable, oil rig cable, FPSO cable, jackup rig cable, semi-submersible cable, drillship cable, offshore wind farm cable, wind turbine cable, subsea cable, underwater cable, shipboard wiring cable, ship electrical cable, naval vessel cable, cruise ship cable, ferry cable, offshore substation cable, offshore power distribution, marine electrical installation
8 Min Read
IEC 60502 is an international standard published by the International Electrotechnical Commission (IEC) that sets out the specification for power cables with extruded insulation. The standard covers cables with voltage ratings from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV), designed for fixed installations such as distribution networks and industrial installations. This widely recognized standard serves as a primary reference for cable manufacturers worldwide and forms the basis for numerous national and regional cable standards.
Technical Department
on29/12/2025

What is IEC 60502 Cable?

IEC 60502 對導體類型、絕緣材料和護套化合物提供了詳細規格。絕緣材料包括 PVC（最高溫度 70°C）、XLPE、EPR 和 HEPR（均為最高 90°C）。導體類別包括第 1 類（實心）、第 2 類（絞合）和第 5 類（柔性），尺寸範圍從 1.5 mm² 到 1600 mm²。護套化合物包括 PVC、PE 和用於防火敏感區域的無鹵素材料。XLPE 絕緣的標稱厚度從 0.6/1 kV 的 1.0 mm 到 18/30 kV 的 8.0 mm 不等。
8 Min Read
DIN VDE 0276 is the widely used German standard for cables with extruded insulation used in power distribution systems. Developed by the VDE (Verband der Elektrotechnik, Elektronik und Informationstechnik e.V.), this comprehensive standard covers a significant percentage of power cables used across the European continent, establishing construction requirements, dimensional specifications, and test methods for both low voltage (0.6/1 kV) and medium voltage (up to 18/30 kV) power cables.
Technical Department
on29/12/2025

What is DIN VDE 0276 Cable?

VDE 0276 電纜的技術規格對於正確選擇和安裝至關重要。XLPE 絕緣電纜允許的連續工作溫度高達 90°C，短路溫度可達 250°C，優於 PVC 絕緣電纜的 70°C 和 160°C。導體採用符合 IEC 60228 第 2 類標準的絞合壓縮圓形銅或鋁導體。導體屏蔽層為擠出的半導電材料，最小厚度 0.3mm，在 90°C 時體積電阻率不超過 500 Ω·m。彎曲半徑要求根據電纜類型不同而變化：無金屬護套電纜為 15 倍外徑，帶鋁護套電纜為 30 倍外徑。
7 Min Read
331HF Shielded Triads Instrumentation Cable is specifically engineered for three-wire measurement systems in demanding offshore and marine environments worldwide. Unlike two-conductor pairs, each triad contains three conductors (Black-White-Red color coded) with a bare tinned drain wire, individually shielded with polyester-backed aluminum foil tape providing 100% coverage for superior electromagnetic interference (EMI) protection. The three-conductor design is essential for RTD (Resistance Temperature Detector) circuits requiring lead wire compensation, three-wire transmitter connections, and balanced instrumentation systems. Available in configurations from 1 to 8 triads in 16 AWG, this cable maintains circuit integrity during fire conditions while delivering exceptional signal accuracy for temperature measurement, process control, and critical safety instrumentation.
Technical Department
on25/12/2025

GEXOL®-331HF Instrumentation Cable

3-wire RTD cable PT100, 3-wire RTD cable PT1000, platinum resistance thermometer cable, RTD lead wire compensation, RTD temperature accuracy, three wire temperature measurement, RTD transmitter wiring, process temperature cable, industrial RTD cable, RTD extension wire, RTD sensor cable marine, offshore RTD installation, temperature measurement offshore, fire safe RTD cable, heat detector cable triads, temperature monitoring cable
7 Min Read
GEXOL®-331HF Three Conductor Power Cable represents the most versatile configuration in the GEXOL fire-resistant cable family, engineered specifically for three-phase power distribution in demanding offshore and marine environments worldwide. This three-conductor design maintains circuit integrity during fire conditions while providing an efficient solution for critical safety circuits. The cable features a Black-White-Red color coding system for easy phase identification, with sizes 1/0 AWG and larger utilizing printed phase identification on the insulation. With optional uninsulated grounding conductor available from 6 AWG upward, this cable delivers complete three-phase power solutions for emergency lighting, fire detection/suppression systems, alarm networks, and personnel egress pathways.
Technical Department
on25/12/2025

GEXOL®-331HF Power Cable

GEXOL-331HF, GEXOL-331HF three conductor, fire resistant cable, low smoke halogen-free cable, LSZH cable, LSOH cable, IEEE 1580, IEC 60331, IEC 332-3 Category A, IEEE 1202, 0.6/1kV power cable, three conductor marine cable, 3-phase cable, three phase with ground, ABS approved, DNV-GL certified, Lloyd’s Register, UL 1309, CSA 245, 90°C rated cable, cross-linked polyolefin, XLPO insulation, tinned copper conductor, bronze armor cable, Class I Division 1, Class I Zone 1, hazardous location cable, emergency lighting cable, fire pump cable, fire detection system, offshore platform, oil and gas cable, Hawke cable gland, EExe gland, EExd gland, black-white-red color code, phase identification, equipment grounding conductor, 耐火電纜, 三芯電纜, 三相電纜, 帶接地電纜, 低煙無鹵, 船用電纜, 離岸電纜, 0.6/1kV額定, Anhui Feichun Cable, 安徽飛純特種電纜, 37-104-320
7 Min Read
GEXOL®-331HF is a premium fire-resistant single conductor power cable engineered for the most demanding offshore and marine environments worldwide. This cable is specifically designed and constructed to maintain circuit integrity during fire conditions, making it the ideal choice for critical safety circuits including emergency lighting systems, fire detection and suppression equipment, alarm systems, and personnel egress pathways. Manufactured with advanced cross-linked polyolefin insulation technology, the GEXOL®-331HF delivers exceptional performance characteristics: fire resistance per IEC 60331, flame retardancy meeting both IEC 332-3 Category A and IEEE 1202 standards, and complete halogen-free construction for minimal smoke generation during combustion events.
Technical Department
on25/12/2025

GEXOL®-331HF Single Conductor Power Cable

GEXOL-331HF, GEXOL 331HF cable, GEXOL-331HF fire resistant cable, GEXOL-331HF 2kV cable, GEXOL-331HF single conductor, GEXOL-331HF power cable, AmerCable GEXOL-331HF, Nexans AmerCable GEXOL, GEXOL-HF insulation, 37-104 series cable耐火電纜, 低煙無鹵電纜, 船用電纜, 離岸電纜, 海洋電纜, 單芯電力電纜, 2kV電纜, 90度額定電纜, 阻燃電纜, 鎧裝電纜, 青銅鎧裝, 鍍錫銅導體, 交聯聚烯烴, 緊急照明電纜, 消防系統電纜, 危險區域電纜, 船級社認證, DNV認證電纜, ABS認證電纜, IEEE 1580標準, IEC 60331標準
6 Min Read
fire emergency, standard cables fail quickly as insulation burns away and conductors short-circuit. Firecross fire resistant cables are constructed with specialized mica tape barriers and fire-resistant insulation that maintain circuit integrity even when directly exposed to flames. This ensures fire alarms continue sounding, emergency lighting remains operational, voice communication systems broadcast evacuation instructions, and lift doors remain controllable—all critical functions that save lives during building evacuations.
Technical Department
on24/12/2025

Firecross Fire Resistant Cable Family

Firecross cables are engineered to maintain circuit integrity during extreme fire conditions, ensuring emergency systems continue operating when lives depend on them. Available in Standard 60-minute and Enhanced 120-minute fire ratings with 2, 3, and 4 core configurations plus Circuit Protective Conductor (CPC), these cables serve critical life safety applications including fire alarms, voice communication systems, emergency lighting, air conditioning controls, and lift door mechanisms. Firecross 電纜經過精心設計，可在極端火災條件下保持電路完整性，確保緊急系統在生命攸關時繼續運行。提供標準 60 分鐘和增強 120 分鐘耐火等級，配備 2、3 和 4 芯配置加電路保護導體 (CPC)，這些電纜服務於關鍵生命安全應用，包括火災警報、語音通訊系統、緊急照明、空調控制和電梯門機構。
4 Min Read
British Standard BS6387 is a test method standard detailing the methodology and performance requirements for cables required to maintain circuit integrity under fire conditions. It has been developed to assist installation designers with their assessment of the fire performance characteristics of various types of cables and their selection for specific applications. The core objective of BS6387 is to guarantee circuit integrity, meaning the cable continues to transmit power or signals without interruption, even when exposed to extreme fire scenarios. This is critical for emergency systems such as fire alarms, emergency lighting, smoke extraction fans, and evacuation guidance systems. BS6387 is not just a product specification but a rigorous test methodology that scrutinizes a cable's ability to resist flames, water, and mechanical impact under fire conditions.
Technical Department
on22/12/2025

What is BS6387 Cable?

BS6387 cable, BS6387 fire resistant cable, BS6387 CWZ cable, BS6387 certified cable, CWZ fire cable, fire resistant cable, circuit integrity cable, BS6387 Category A, BS6387 Category B, BS6387 Category C, BS6387 Category D, BS6387 Category W, BS6387 Category Z,BS6387電纜, BS6387防火電纜, CWZ防火電纜, 防火電纜, 耐火電纜, 電路完整性電纜, 礦物絕緣電纜, 雲母帶電纜, 低煙無鹵防火電纜, 應急照明電纜, 消防報警電纜, 排煙風機電纜, 疏散照明電纜, 安徽飛純特種電纜, 防火等級電纜, 950度防火電纜, 3小時防火電纜