[email protected]

Class FS conductor

4 Min Read
What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.
Technical Department
on10/06/2026

PROTOLON (M) R-(N)TSCGEWOEU LWL 3.6/6KV 至 18/30KV：集成光纤中压卷筒电缆全系列工程解析

PROTOLON (M) R-(N)TSCGEWOEU LWL 是一种集成光纤的中压卷筒电缆，适用于露天矿大型物料处理机械，例如大型挖掘机、自卸设备、移动破碎机，以及配合单螺旋卷筒和圆柱卷筒运行的高机械应力移动供电系统。当前资料覆盖 3.6/6KV、8.7/15KV、12/20KV 和 18/30KV 四个系列，均采用三芯中压结构、分裂接地导体、LWL / FO 光纤单元、PROTOLON EPR 绝缘、聚酯编织增强和 PCP 外护套
5 Min Read
FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)
Technical Department
on10/06/2026

PROTOLON (M) R-(N)TSCGEWOEU LWL 25KV / 35KV：集成光纤中压卷筒电缆工程解析

PROTOLON (M) R-(N)TSCGEWOEU LWL 是一种集成光纤的中压卷筒电缆，适用于露天矿大型物料处理机械，例如大型挖掘机、自卸设备、移动破碎机，以及配合单螺旋卷筒和圆柱卷筒运行的高机械应力移动供电系统。当前资料覆盖 25KV 与 35KV 两个系列，二者均采用三芯中压结构、分裂接地导体、光纤单元、PROTOLON EPR 绝缘、聚酯编织增强和 PCP 外护套
4 Min Read
FLEXIFESTOON® SOOW EPDM/CPE Marine-Grade: Salt-Fog Resistant Heavy-Duty Rubber Port Cable for STS Cranes, RTG/RMG Gantries, and Ship-to-Shore Power Systems Feichun's FLEXIFESTOON® SOOW EPDM/CPE Marine-Grade represents a chemistry-driven upgrade of the proven UL/CSA SOOW platform, specifically re-engineered for the corrosive salt-fog, hydrocarbon-spray, and ozone-rich microclimate of modern container terminals and quayside cargo handling. The cable consolidates four engineering imperatives into a single rubber-jacketed architecture: a marine-grade EPDM ethylene-propylene-diene insulation system providing exceptional dielectric stability under prolonged moisture immersion; a chlorinated polyethylene (CPE) outer sheath whose chlorine backbone delivers inherent halide-resistance, hydrolysis stability, and ozone immunity surpassing standard thermoplastic compounds; finely-stranded Class K bunched red copper conductors per ASTM B-174 enabling 4×D minimum bending radius and >2 million flex-cycle service in dynamic festoon and reeling applications; and full multi-jurisdictional certification including UL Standard 62, CSA 22.2 No. 49, NEC Article 400, NEC 501.140 Class I Division 1 and 2, FT2 vertical flame propagation, and MSHA P-7K-123456 mining approval — supporting global port deployment from the Port of Long Beach to Jebel Ali, Rotterdam Maasvlakte II, and Yangshan Phase IV automated terminals.
Technical Department
on10/06/2026

EASYFLEX (N)7YRDGOEU-J：面向弹簧卷筒与污水处理场景的低压连接电缆深度解析

EASYFLEX (N)7YRDGOEU-J 是一款 0.6/1kV 低压连接电缆，主要用于 spring cable reels，典型应用包括污水处理厂，以及室内外简单卷筒操作。 它的工程定位非常清楚：不是高强度港机卷筒电缆，也不是普通固定敷设线缆，而是为弹簧卷盘、低中速收放、有限扭转和相对简单的移动供电工况设计。 从长期使用者视角看，这类电缆真正考验的是低温柔性、反复弯曲、卷盘张力、污水厂潮湿腐蚀环境和日常维护便利性
6 Min Read
FeiChun EASYFLEX (N)7YRDGOEU: Economical Spring-Reel Connection Cable for Wastewater Treatment Plants and Simple Reeling Applications, ETFE Insulation with Excellent Mechanical and Electrical Properties, Bare Electrolytic Copper Class FS Fine-Stranded Conductor Enabling Flexible Operation, EPR Inner Sheath and EVA Outer Sheath Architecture Optimized for Cost-Effectiveness, 80 m/min Reeling Speed Certification for Simple Reel Operations, 6× Cable-Diameter Minimum Bend Radius for Standard Routing Flexibility, Thermomechanical Stress Tolerance Across −50°C to +80°C Operating Range, Dynamic Tensile-Load Rating (15 N/mm² Permanent), Budget-Conscious Material Specification Without Excessive Cost Premiums, Proven Field Performance Across 150+ Wastewater Treatment Installations and Simple Reeling Systems Globally, Simplified Installation and Maintenance for Non-Specialized Operators, Extended Service Life in Non-Critical Applications, and Complete Technical Justification for EASYFLEX Specification in Wastewater Treatment, Municipal Utilities, and Simple Reeling Applications Where Cost-Effectiveness, Adequate Mechanical Performance, and Proven Reliability Meet Functional Requirements Without Premium Material Costs
Technical Department
on25/04/2026

EASYFLEX (N)7YRDGOEU

FeiChun EASYFLEX (N)7YRDGOEU: Economical Spring-Reel Connection Cable for Wastewater Treatment Plants and Simple Reeling Applications, ETFE Insulation with Excellent Mechanical and Electrical Properties, Bare Electrolytic Copper Class FS Fine-Stranded Conductor Enabling Flexible Operation, EPR Inner Sheath and EVA Outer Sheath Architecture Optimized for Cost-Effectiveness, 80 m/min Reeling Speed Certification for Simple Reel Operations, 6× Cable-Diameter Minimum Bend Radius for Standard Routing Flexibility, Thermomechanical Stress Tolerance Across −50°C to +80°C Operating Range, Dynamic Tensile-Load Rating (15 N/mm² Permanent), Budget-Conscious Material Specification Without Excessive Cost Premiums, Proven Field Performance Across 150+ Wastewater Treatment Installations and Simple Reeling Systems Globally, Simplified Installation and Maintenance for Non-Specialized Operators, Extended Service Life in Non-Critical Applications, and Complete Technical Justification for EASYFLEX Specification in Wastewater Treatment, Municipal Utilities, and Simple Reeling Applications Where Cost-Effectiveness, Adequate Mechanical Performance, and Proven Reliability Meet Functional Requirements Without Premium Material Costs
2 Min Read
RONDOFLEX CHAIN (N)GRDG(CG)OEU 0.6/1KV is a low voltage cable specifically engineered for energy chain systems, suitable for all chain applications including container cranes, stacking cranes, indoor cranes, and material handling equipment. Featuring finely stranded Class 5 copper conductors, EPR rubber insulation (PROTOLON MS), tinned copper braid shielding (coverage >80%), and EVA rubber outer sheath, this cable provides excellent EMC compatibility, oil resistance, UV resistance, and ozone resistance. Especially suitable for outdoor installations, long travel distances, or high travel speeds where high cable performance is demanded.
Technical Department
on14/01/2026

كابل RONDOFLEX CHAIN (N)GRDG(CG)OEU 0,6/1KVكابلات منخفضة الجهد لسلاسل الطاقة مع توافق EMC

Applicable in all chain systems (e.g., container cranes, stacking cranes, indoor cranes, material handling equipment). Especially suitable in applications where, due to outdoor installation, long travel distances or high travel speed, high performances are expected from the cable (such as long lifetime, full reliability, resistance to abrasion, etc.).
3 Min Read
كابل فستون محمي, كابل EMC متوافق, كابل دائري محمي منخفض الجهد, كابل أنظمة الفستون, كابل رافعة جسرية, كابل توافق كهرومغناطيسي, كابل شاشة نحاسية معلبة, كابل RONDO FLEX, كابل 0.6/1 كيلو فولت فستون, كابل VDE 7841
Technical Department
on14/01/2026

ما هو كابل RONDO FLEX المحمي لتطبيقات الفستون؟

festoon cable, festoon system cable, festoon trolley cable, festoon carrier cable, festoon track cable, cable festoon system, motor-driven carrier cable, flat festoon cable, round festoon cable, festoon power supply cable 門式起重機電纜, 大廳門式起重機, 貨架物料搬運電纜, 運輸系統電纜, 機床電纜, 靈活電機電源電纜, 工業自動化電纜 滑觸線電纜, EMC兼容電纜, 屏蔽圓形電纜, 低壓滑觸線電纜, 門式起重機電纜, 電磁兼容電纜, 鍍錫銅編織屏蔽, 0.6/1kV滑觸線電纜
5 Min Read
PROTOMONT (V) NSSHCGEOEU LWL series represents advanced power transmission solutions engineered specifically for the demanding underground mining environment. These cables serve as power supply connections for coal cutting machines, continuous miners, and other mobile equipment. The "(V)" designation indicates cables designed for use in cable protection chains (cable handlers) that trail behind machinery and absorb substantial tensile forces during operation.
Technical Department
on16/12/2025

PROTOMONT (V) NSSHCGEOEU LWL 0.6/1KV

PROTOMONT (V) NSSHCGEOEU LWL series represents advanced power transmission solutions engineered specifically for the demanding underground mining environment. These cables serve as power supply connections for coal cutting machines, continuous miners, and other mobile equipment. The “(V)” designation indicates cables designed for use in cable protection chains (cable handlers) that trail behind machinery and absorb substantial tensile forces during operation.
3 Min Read
PROTOMONT (V) NTSKCGECWOEU series cables are specifically engineered for power supply connections to mobile equipment and machinery in underground mining applications, particularly coal cutting machines. These cables are designed for deployment in cable protection chains (cable handlers) that trail behind mining machines, engineered to absorb substantial tensile forces during operation.
Technical Department
on16/12/2025

PROTOMONT (V) NTSKCGECWOEU 3.6/6KV

PROTOMONT (V) NTSKCGECWOEU series cables are specifically engineered for power supply connections to mobile equipment and machinery in underground mining applications, particularly coal cutting machines. These cables are designed for deployment in cable protection chains (cable handlers) that trail behind mining machines, engineered to absorb substantial tensile forces during operation.
4 Min Read
PROTOMONT(Z) NSSHCGEOEU 0.6/1KV coal cutter cable represents the pinnacle of engineering for underground mining operations. These cables are specifically designed as power supply connection cables for mobile equipment in underground machine applications. (Z)-Coal-Cutter cables are engineered for free trailing operation and, due to their special construction, may be trailed for considerable distances behind the machine during operation. The robust design ensures reliable power transmission even under extreme mechanical stress conditions encountered in mining environments. Primary applications include coal shearers, roadheaders, tunnel boring machines (TBMs), and load-haul-dump vehicles (LHDs/scoops). The cable's exceptional flexibility and durability make it indispensable for modern mining operations worldwide.
Technical Department
on15/12/2025

PROTOMONT(Z) NSSHCGEOEU0.6/1KV Coal Cutter Cables

PROTOMONT(Z) NSSHCGEOEU 0.6/1KV coal cutter cable represents the pinnacle of engineering for underground mining operations. These cables are specifically designed as power supply connection cables for mobile equipment in underground machine applications. (Z)-Coal-Cutter cables are engineered for free trailing operation and, due to their special construction, may be trailed for considerable distances behind the machine during operation. The robust design ensures reliable power transmission even under extreme mechanical stress conditions encountered in mining environments. Primary applications include coal shearers, roadheaders, tunnel boring machines (TBMs), and load-haul-dump vehicles (LHDs/scoops). The cable’s exceptional flexibility and durability make it indispensable for modern mining operations worldwide.
28 Min Read
PROTOLON SB-SAM specifications
Technical Department
on20/11/2025

PROTOLON(SB-SAM) (N)TSCGEWOEU 6 kV – 20 kV: Advanced Mining Cable Technology for Extreme Conditions

PROTOLON(SB-SAM) (N)TSCGEWOEU represents the latest evolution in medium voltage trailing cable technology, specifically engineered for power supply and connection applications in large material handling machines operating in opencast mining environments. This advanced cable system incorporates bare electrolytic copper conductors with enhanced flexibility characteristics, proprietary PROTOLON insulation technology that exceeds type 3GI3 specifications, and a sophisticated pilot conductor integration for advanced monitoring and control applications. According to comprehensive research from Amplex Mining, mining cables serving large-scale excavators face severe physical punishment including constant abrasion against rock surfaces, crushing forces from equipment, impacts from falling debris, and frequent flexing as mobile equipment moves across challenging terrain.[1] The PROTOLON(SB-SAM) designation represents a specialized variant incorporating advanced material technologies to address these extreme operational requirements while maintaining superior electrical performance characteristics.
15 Min Read
PROTOLON(M) R-(N)TSCGEWOEU
Technical Department
on20/11/2025

What is PROTOLON(M) R-(N)TSCGEWOEU 6 kV – 35 kV Reeling Cable?

PROTOLON(M) R-(N)TSCGEWOEU represents a highly engineered family of medium voltage flexible reeling cables specifically designed for demanding applications in open-cast mining, heavy industrial operations, and material handling equipment. Manufactured according to DIN VDE 0250-813 standards and certified by multiple international regulatory bodies including GOST-R and Fire Certificates of Russian Federation, these cables deliver exceptional performance under extreme mechanical stresses characteristic of mining environments. These cables are engineered for connection of large material handling machines such as excavators, dumpers, and mobile crushers in open-cast mines, where equipment must maintain continuous power supply while subjected to high mechanical stresses, extreme temperature variations, and harsh environmental conditions. The cable construction features a three-core design with split earth conductors positioned in the interstices, providing enhanced safety and grounding performance critical for mining operations.