[email protected]

water resistant

4 Min Read
飞纯 Type 209 是飞纯电缆基于 AS/NZS 1802:2003 卷筒与拖曳电缆 体系设计的矿用柔性馈电与拖曳电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，Type 209 系列电缆主要作为矿山机械柔性馈电电缆使用，更适合作为拖曳电缆而不是高频卷筒电缆。较小规格适用于钻机、手持工具和移动设备。 这一定义是理解 Type 209 的关键。Type 209 不是普通工业橡套软电缆，也不只是单纯的矿山供电线。它的核心定位是 矿山机械柔性馈电电缆，也就是为矿山机械提供可移动、可拖曳、可适应复杂作业路径的供电系统。同时，它更适合作为 拖曳电缆，即跟随设备移动的电缆，而不是长期高频卷绕使用的卷筒电缆。
Technical Department
on24/06/2026

什么是 H07RN8-F 450/750V Harmonized Rubber Cables

H07RN8-F 450/750V Harmonized Rubber Cables 是一种用于潜水泵和类似工业水下应用的重型柔性橡套电缆。根据资料说明，该电缆可用于工业用水环境，适用水深最高可达 10 m，水温范围最高可达 40℃，同时也适用于干燥、潮湿和湿润应用。Feichun 将其定位于矿山排水、地下工程排涝、港口泵站、码头检修排水、工业水池和移动潜水泵供电等场景。它的工程价值不是单纯“能进水”，而是在水压、潮湿、移动、拉拽、磨损和低压动力传输同时存在时，仍能通过 Class 5 多股铜导体、EI4 橡胶绝缘、EM2/EM3 内护套与 EM2 外护套形成稳定的电气与机械防护系统。
20 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on18/06/2026

Гибкие шахтные, карьерные и тяжёлые резиновые кабели для trailing, reeling, drag chain, festoon, вертикальных стволов, насосов и подземных работ

Данная серия включает специальные гибкие кабели для тяжёлых условий эксплуатации: шахтные trailing cables, reeling cables, drag chain cables, festoon cables, водостойкие кабели для насосов, кабели для вертикальных стволов, туннельных и дноуглубительных работ, а также силовые, контрольные и коммуникационные конструкции. В линейке представлены решения с силовыми жилами, защитно-заземляющими проводниками, ground check, контрольными элементами, fiber optic module, экранами, полупроводящими слоями, полиамидным армированием и особо прочными оболочками из CR, CPE, TPU и специальных термореактивных компаундов.
8 Min Read
Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables for port equipment, container terminals, and offshore platforms — from conductor architecture and EPR insulation to steel wire armour (M2) design rationale, galvanic corrosion protection mechanisms, environmental compliance, and validated performance benchmarking against Nexans Eproneo Port and Prysmian marine systems.
Technical Department
on17/06/2026

Безгалогенный огнестойкий PUR барабанный кабель 600/1000V для тяжёлых условий эксплуатации, горной техники, кранов и удлинительных линий

PUR reeling cable для тяжёлых применений — это механически прочный барабанный кабель с гибкими медными жилами класса 5, изоляцией XLPE, жёлтой наружной оболочкой PUR и anti-twist element. Кабель предназначен для тяжёлых условий эксплуатации, включая горную технику, краны, удлинительные кабели, барабанные системы и подвижное оборудование. Его ключевые свойства: хорошая механическая стойкость, безгалогенное исполнение, огнестойкость, хорошая маслостойкость, химическая стойкость, стойкость к UV, озону и воде, номинальное напряжение Uo/U 600/1000V и скорость намотки до 120 m/min.
6 Min Read
LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable
Technical Department
on17/06/2026

Безгалогенный огнестойкий PUR барабанный кабель 600/1000V для тяжёлых применений, горной техники, кранов и удлинительных линий

PUR reeling cable для тяжёлых применений — это механически прочный, безгалогенный и огнестойкий барабанный кабель с гибкими медными жилами класса 5, изоляцией XLPE и жёлтой наружной оболочкой PUR. Кабель предназначен для тяжёлых условий эксплуатации, например для горной техники, кранов, удлинительных кабелей, барабанных систем и подвижного оборудования, где требуются высокая механическая стойкость, хорошая маслостойкость, химическая стойкость, стойкость к UV, озону и воде.
9 Min Read
EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
Technical Department
on12/06/2026

ÖLFLEX® CHARGE EV-(R)EYU: техническая статья о кабеле для зарядки электромобилей

ÖLFLEX® CHARGE EV-(R)EYU — это гибкий кабель для conductive AC charging system electric vehicle. Кабель предназначен для зарядки electric vehicles and plug-in hybrid vehicles, подходит для indoor and outdoor use, имеет DEKRA & CQC approvals, стойкость к маслам, химическим веществам, UV, ozone, scraping and grinding, а также halogen-free and flame-retardant construction.
3 Min Read
EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
Technical Department
on15/05/2026

FLEXIFESTOON® (N)GRDGCGÖU-J

EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn’t interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
8 Min Read
(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: - High bending flexibility (4×D minimum typical) - Fast rewind capability (240+ m/min rated speed) - Sustained torsion tolerance (±25°/1m continuous) - Extended temperature range (−50 to +80°C) - UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
Technical Department
on15/05/2026

(N)GRDGÖU-J Festoon Cable

(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: – High bending flexibility (4×D minimum typical) – Fast rewind capability (240+ m/min rated speed) – Sustained torsion tolerance (±25°/1m continuous) – Extended temperature range (−50 to +80°C) – UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
7 Min Read
GAALFLEX® VFD EMV-FC 3GSEGCH: 3.6/6 kV Medium Voltage Halogen-Free Frequency Converter Motor Power Supply Cable with EPR Halogen-Free Rubber Insulation, Halogen-Free Type ST8 Jacket, Dual Red Copper Tape + Concentric Copper Screen Architecture, Semi-Conductive Layers, Class 2 Red Copper Conductors, EMC-Optimized RFI Shielding, Exceptional +250°C Short-Circuit Tolerance, 35–240 mm² Industrial Motor, 10×D Bending Radius, EN 50267/EN 50268/IEC 60754/IEC 61034 Halogen-Free/Smoke Compliance, Water & Explosion Hazard & Underground Burial | European Medium Voltage Halogen-Free Frequency Converter Motor Cable European standard 3.6/6 kV medium voltage halogen-free VFD motor power supply cable combining halogen-free EPR (ethylene propylene rubber) insulation with professional medium voltage engineering, semi-conductive layers, dual red copper tape + concentric copper screen shielding, zero-corrosive-gas and low-smoke outer jacket, EMC-optimized RFI protection, Class 2 stranded red copper conductors, and comprehensive safety-critical environment integration—addressing frequency converter controlled AC industrial motor drives in safety-sensitive facilities, medium voltage electrical systems (3.6/6 kV grids), explosion hazard area installation (ATEX), underwater/underground direct burial capability, zero halogen/zero corrosive gas emissions, exceptional short-circuit fault tolerance (+250°C), EMC-optimized frequency converter compatibility, and complete European medium voltage industrial automation infrastructure simultaneously.
Technical Department
on11/05/2026

GAALFLEX® VFD EMV-FC 3GSEGCH

GAALFLEX® VFD EMV-FC 3GSEGCH: 3.6/6 kV Medium Voltage Halogen-Free Frequency Converter Motor Power Supply Cable with EPR Halogen-Free Rubber Insulation, Halogen-Free Type ST8 Jacket, Dual Red Copper Tape + Concentric Copper Screen Architecture, Semi-Conductive Layers, Class 2 Red Copper Conductors, EMC-Optimized RFI Shielding, Exceptional +250°C Short-Circuit Tolerance, 35–240 mm² Industrial Motor, 10×D Bending Radius, EN 50267/EN 50268/IEC 60754/IEC 61034 Halogen-Free/Smoke Compliance, Water & Explosion Hazard & Underground Burial | European Medium Voltage Halogen-Free Frequency Converter Motor Cable European standard 3.6/6 kV medium voltage halogen-free VFD motor power supply cable combining halogen-free EPR (ethylene propylene rubber) insulation with professional medium voltage engineering, semi-conductive layers, dual red copper tape + concentric copper screen shielding, zero-corrosive-gas and low-smoke outer jacket, EMC-optimized RFI protection, Class 2 stranded red copper conductors, and comprehensive safety-critical environment integration—addressing frequency converter controlled AC industrial motor drives in safety-sensitive facilities, medium voltage electrical systems (3.6/6 kV grids), explosion hazard area installation (ATEX), underwater/underground direct burial capability, zero halogen/zero corrosive gas emissions, exceptional short-circuit fault tolerance (+250°C), EMC-optimized frequency converter compatibility, and complete European medium voltage industrial automation infrastructure simultaneously.
10 Min Read
Feichun FLEXIFESTOON® SEOOW YELLOW TPE/TPE: Next-Generation Thermoplastic Elastomer Industrial Control Cables (UL 600V −60 to +105°C, CSA SEOOW 600V −60 to +105°C FT2, Proprietary Dual-TPE Architecture with Phase-Separated Block Copolymer Insulation & Thermoplastic Elastomer Outer Sheath, Dynamically Vulcanized Elastomer Core (DVE) Cross-Linking Technology, Advanced Extreme-Temperature Gradient Engineering via Molecular Sequencing, Comprehensive Environmental Resistance (Ozone/UV/Oil/Water/Abrasion), 100% Recyclable Thermoplastic Design, MSHA Hazardous Location Approval, Yellow Visibility Sheath RAL 1021, 4×D Dynamic Bending Radius, Class 1 Division 2 Compliance, 30+ Complete SKU Configurations, FT2 Self-Extinguishing Flame Rating, Federal Spec JC580 Compliance): Comprehensive Advanced Polymer Materials Science and Block Copolymer Architecture Analysis Integrating Phase-Separated Molecular Engineering, Dynamically Vulcanized Elastomer Chemistry, Extreme Low-Temperature Glass-Transition Design, Ultra-High-Temperature Thermal Stability Mechanisms, Recyclable Thermoplastic Processing Chemistry, and Next-Generation Industrial Control System Integration
Technical Department
on28/04/2026

FLEXIFESTOON® SEOOW YELLOW

Feichun FLEXIFESTOON® SEOOW YELLOW TPE/TPE: Next-Generation Thermoplastic Elastomer Industrial Control Cables (UL 600V −60 to +105°C, CSA SEOOW 600V −60 to +105°C FT2, Proprietary Dual-TPE Architecture with Phase-Separated Block Copolymer Insulation & Thermoplastic Elastomer Outer Sheath, Dynamically Vulcanized Elastomer Core (DVE) Cross-Linking Technology, Advanced Extreme-Temperature Gradient Engineering via Molecular Sequencing, Comprehensive Environmental Resistance (Ozone/UV/Oil/Water/Abrasion), 100% Recyclable Thermoplastic Design, MSHA Hazardous Location Approval, Yellow Visibility Sheath RAL 1021, 4×D Dynamic Bending Radius, Class 1 Division 2 Compliance, 30+ Complete SKU Configurations, FT2 Self-Extinguishing Flame Rating, Federal Spec JC580 Compliance): Comprehensive Advanced Polymer Materials Science and Block Copolymer Architecture Analysis Integrating Phase-Separated Molecular Engineering, Dynamically Vulcanized Elastomer Chemistry, Extreme Low-Temperature Glass-Transition Design, Ultra-High-Temperature Thermal Stability Mechanisms, Recyclable Thermoplastic Processing Chemistry, and Next-Generation Industrial Control System Integration