[email protected]

anti-twisting braid

19 Min Read
飞纯 Type 245 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆 标准体系设计的矿用非常柔性长壁采煤机电缆，电压范围覆盖 1.1 至 6.6KV。根据产品资料，该电缆主要用作长壁采煤机电缆，也可用于连续采煤机和长壁外围电缆。 Type 245 的关键结构特征是 三根中央可伸长 Pilot / 控制芯线。这三根中央 Pilot 芯线可用于 接地连续性监测 和 控制回路。对于长壁采煤机来说，电缆不仅要传输动力电能，还要承担设备控制、保护联锁、接地连续性确认和移动工况下的安全监测任务。
Technical Department
on23/06/2026

O que é o PANZERFLEX-ELX MV: Análise de Engenharia Aprofundada do Cabo de Carretel de Alta Velocidade de Média Tensão 3,6/6 a 12/20 kV

O PANZERFLEX-ELX MV é um cabo flexível de média tensão para sistemas de carretel (reeling), projetado para a alimentação de partes móveis de máquinas e equipamentos de movimentação de granéis sob esforços mecânicos de altos a extremos. Empilhadeiras-recuperadoras, descarregadores de navio (ship-to-shore), pórticos de contêiner e escavadeiras são suas aplicações-alvo, com adequação também a sistemas de festão. Sua marca registrada é o desempenho dinâmico: flexão e torção frequentes, movimento rápido com forte aceleração e velocidade de até 180 m/min sem restrição de operação — três vezes a velocidade típica de um cabo de tunelamento. Para sustentar isso, ele reúne condutor de cobre estanhado classe 5, isolação HEPR micro-filtrada de novo composto, controle de campo por blindagens semicondutoras, passo de cabeamento curto e uma trança têxtil anti-torção firmemente aderida entre as bainhas de PCP.
15 Min Read
Type 210 1.1/1.1KV 是一种面向矿山移动供电场景的高柔性拖曳电缆。资料明确指出其主要应用于 hand-held boring machines and drills，即手持式凿岩机、钻机以及类似高机械应力移动设备。与普通低压橡套软电缆相比，Type 210 的技术边界从一开始就包含了移动、拖曳、弯曲、振动、磨损、接地连续性和 Pilot 控制/保护功能。 在澳洲矿山、地下煤矿、露天矿、采石场、矿石码头、散货码头和重载移动设备现场，电缆的失效往往不是单一电气问题，而是导体疲劳、护套磨耗、内部结构位移、接地中断、Pilot 回路异常和设备振动共同作用的结果。飞纯 Type 210 通过柔性镀锡退火铜导体、EPR 绝缘、半导电弹性体绝缘屏蔽、复合屏蔽接地导体、半导电 PCP cradle separator、中央可伸长 Pilot 芯线和重型 PCP 护套，形成一个完整的矿用移动供电结构。
Technical Department
on23/06/2026

O que é o TUNNELFLEX-TTX: Análise de Engenharia Aprofundada do Cabo de Média Tensão 3,6/6 a 12/20 kV COM Proteção Anti-Torção

O TUNNELFLEX-TTX RS-(N)TSCGEWOEU é a versão de média tensão da família TUNNELFLEX equipada com proteção anti-torção — uma trança de malha aberta de fios sintéticos aplicada entre a manta interna e a bainha externa de PCP. Ele alimenta equipamentos móveis com alto risco de dano mecânico em tunelamento, nas mesmas quatro classes de tensão do TUNNELFLEX-TX (3,6/6 a 12/20 kV), mas para sistemas em que o cabo não é apenas defletido em um plano, e sim torcido em torno do próprio eixo durante o serviço. O TTX completa a família: ele está para o TX assim como o R/PUR está para o PUR na baixa tensão — a mesma construção elétrica, acrescida do elemento que absorve o esforço torcional.
4 Min Read
AS/NZS 1802 (Australian/New Zealand Standard 1802) establishes the technical requirements for flexible mining cables used in underground and open-pit mining operations across Australia, New Zealand, and the broader Pacific region. Type 241 within this standard designates unarmoured flexible power cables rated at 0.6/1 kV with a Class 5 copper conductor, suitable for mobile mining equipment and drag cable applications. The standard was initially published in 1993 and has been progressively updated (most recently 2019) to incorporate advances in materials science and safety requirements. AS/NZS 1802 Type 241 employs a single-core earth architecture: the cable contains one dedicated protective earth conductor of specified cross-section, positioned at a fixed location within the cable cross-section (typically at the "6 o'clock" position relative to the three phase conductors at 12, 4, and 8 o'clock). This single-core design reflects a pragmatic engineering philosophy: the earth conductor is sized to carry fault currents, provide equipotential grounding for equipment frames, and enable protective relay operation in the event of phase-to-frame faults.
Technical Department
on18/06/2026

什么是 PANZERFLEX-L 0,6/1 kV Instrumentation and Control：矿山高柔性抗扭仪表控制电缆技术解析

PANZERFLEX-L Instrumentation and Control 是面向矿山、散料搬运、移动机床、卷筒与拖令系统的高柔性多芯控制电缆。它通过 Class 5 镀锡铜导体、抗压 HEPR 绝缘、最多三层的 ≤7,5D 短节距成缆、氯丁橡胶内外护套及粘结式合成纱抗扭增强，在高机械应力、频繁弯曲/扭转、快速移动和强加速度条件下传输控制、电源、联锁和仪表回路
4 Min Read
Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables for port equipment, container terminals, and offshore platforms — from conductor architecture and EPR insulation to steel wire armour (M2) design rationale, galvanic corrosion protection mechanisms, environmental compliance, and validated performance benchmarking against Nexans Eproneo Port and Prysmian marine systems.
Technical Department
on18/06/2026

什么是 PANZERFLEX-L 0,6/1 kV：矿山高柔性抗扭卷筒与拖令动力电缆技术解析

PANZERFLEX-L 0,6/1 kV 是一种面向矿山、散料搬运、移动机床、卷筒系统与拖令系统的高柔性动力电缆。它通过 Class 5 镀锡铜导体、抗压 HEPR 绝缘、≤7,5D 短节距成缆、氯丁橡胶内外护套以及牢固粘结的合成纱抗扭增强层，应对高机械应力、频繁弯曲与扭转、快速移动和强加速度工况。
4 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on18/06/2026

什么是 RS-(N)TSCGEWOEU-TUNNELFLEX-TTX from 3,6/6 to 12/20kV：带抗扭保护中压隧道移动设备电缆技术解析

RS-(N)TSCGEWOEU-TUNNELFLEX-TTX 是一种面向隧道移动设备供电的中压柔性动力电缆，覆盖 3,6/6kV、6/10kV、8,7/15kV 和 12/20kV 电压等级。它用于高机械损伤风险环境中的移动设备供电，结构中增加了 Open mesh of synthetic yarns 合成纱开放网状抗扭编织层，因此相比无抗扭保护结构，它更适合存在扭转控制需求、卷筒运动更复杂、移动路径更严苛的中压供电场景。
3 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on16/06/2026

リーリングケーブル技術マニュアル

リーリング、フェストゥーン、バスケット型移動ケーブルの寿命は、施工と巻取システムの設計に大きく左右されます。本マニュアルでは、曲げ半径、ガイド、張力保護、アンカリング、リール選定、ねじれ除去に加え、許容電流・低減係数・電圧降下・短絡の電気計算手法を扱います。
18 Min Read
What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.
Technical Department
on16/06/2026

Cabos de CarretelManual Técnico

A vida útil dos cabos móveis de carretel, festão e cesto depende, em grande medida, da instalação e do projeto do sistema de enrolamento. Este manual aborda raios de curvatura, guias, proteção de tração, ancoragem, seleção de carretel e remoção de torção, junto com os métodos elétricos de capacidade de corrente, redução (derating), queda de tensão e curto-circuito
21 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on16/06/2026

Cáp Cuộn (Reeling)Sổ tay Kỹ thuật

Tuổi thọ của cáp di động loại cuộn (reeling), treo (festoon) và giỏ (basket) phụ thuộc phần lớn vào việc lắp đặt và thiết kế hệ thống quấn cáp. Sổ tay này trình bày bán kính uốn cong, bộ dẫn hướng, bảo vệ lực căng, neo giữ, lựa chọn tang cuộn và xử lý xoắn, cùng với các phương pháp điện về khả năng tải dòng, hệ số chiết giảm, sụt áp và ngắn mạch.
19 Min Read
La vida útil de los cables móviles de carrete, festón y canasta depende, en gran medida, de la instalación y del diseño del sistema de enrollado. Este manual abarca radios de curvatura, guías, protección de tensión, anclaje, selección de carrete y eliminación de torsión, junto con los métodos eléctricos de capacidad de corriente, reducción (derating), caída de tensión y cortocircuito.
Technical Department
on15/06/2026

Cables de CarreteManual Técnico

La vida útil de los cables móviles de carrete, festón y canasta depende, en gran medida, de la instalación y del diseño del sistema de enrollado. Este manual abarca radios de curvatura, guías, protección de tensión, anclaje, selección de carrete y eliminación de torsión, junto con los métodos eléctricos de capacidad de corriente, reducción (derating), caída de tensión y cortocircuito.
17 Min Read
(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: - High bending flexibility (4×D minimum typical) - Fast rewind capability (240+ m/min rated speed) - Sustained torsion tolerance (±25°/1m continuous) - Extended temperature range (−50 to +80°C) - UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
Technical Department
on15/06/2026

Reeling CableTechnical Manual

The service life of reeling, festoon and basket-type mobile cables depends, to a large extent, on the installation and the design of the winding system. This manual covers bending radii, guides, tension protection, anchoring, reel selection and twist removal, together with the electrical methods for current rating, derating, voltage drop and short-circuit.
6 Min Read
EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
Technical Department
on15/06/2026

RS-(N)TSCGEWOEU-TUNNELFLEX-TTX — средневольтный тоннельный кабель с защитой от скручивания

RS-(N)TSCGEWOEU-TUNNELFLEX-TTX — средневольтный силовой кабель от 3,6/6 kV до 12/20 kV для питания мобильного оборудования в тоннельных применениях. Кабель предназначен для условий с высоким риском механического повреждения и оснащён anti-twisting braid — открытой сеткой из синтетических нитей.
6 Min Read
PANZERFLEX-ELX MV is a premium medium voltage flexible reeling power cable series available in four voltage ratings from 3.6/6 kV to 12/20 kV. These cables represent the state-of-the-art in high-voltage flexible cable technology, specifically designed for mining operations and bulk material handling applications where equipment requires reliable power supply during continuous movement. The symmetrical design combined with narrow production tolerances ensures very low electromagnetic interference, making these cables ideal for sensitive industrial environments.
Technical Department
on23/12/2025

What is PANZERFLEX-ELX MV 3.6/6 to 12/20 kV Cable?

PANZERFLEX-ELX MV cable, PANZERFLEX-ELX MV 3.6/6kV, PANZERFLEX-ELX MV 6/10kV, PANZERFLEX-ELX MV 8.7/15kV, PANZERFLEX-ELX MV 12/20kV, reeling cable, medium voltage reeling cable, stacker reclaimer cable, ship to shore crane cable, STS crane cable, container crane cable, RTG crane cable, excavator cable, festoon system cable, cable reel system, mining reeling cable, bulk material handling cable, IEC 60228 Class 5, VDE 0250 part 813, DIN VDE 0298, HEPR insulation, micro-filtered HEPR, 3GI3 classification, 5GM3 compound, tinned copper conductor, polychloroprene sheath, PCP sheath, textile braid, anti-twisting cable, red sheath cable, 180 m/min reeling, 120 m/min festoon, high speed reeling, 90°C conductor, -40°C fixed installation, -30°C flexible, 250°C short circuit, low EMI cable, symmetrical design, 3×25+3×25/3, 3×50+3×25/3, 3×95+3×50/3, 3×120+3×70/3, 3×185+3×95/3, 3×240+3×120/3, PANZERFLEX-ELX MV電纜, 中壓卷筒電纜, 卷筒電纜, 堆料機電纜, 取料機電纜, 岸橋電纜, 集裝箱起重機電纜, 挖掘機電纜, 滑觸線電纜, 採礦電纜, 物料處理電纜, 鍍錫銅導體電纜, 防扭電纜, 高速卷繞電纜, 港口起重機電纜, Anhui Feichun cable, Feichun Special Cable, 安徽飛純電纜
6 Min Read
RS-(N)TSCGEWOEU TUNNELFLEX-TTX is a specialized medium voltage flexible power cable series available in four voltage ratings from 3.6/6 kV to 12/20 kV. These cables are engineered specifically for tunneling applications, providing reliable power supply to mobile equipment operating in harsh underground environments where there is a high risk of mechanical damage. The cable designation follows German DIN VDE nomenclature, with (N) indicating compliance with German national standards.
Technical Department
on23/12/2025

What is RS-(N)TSCGEWOEU TUNNELFLEX-TTX 3.6/6 to 12/20 kV Cable?

RS-(N)TSCGEWOEU cable, TUNNELFLEX-TTX cable, TUNNELFLEX-TTX 3.6/6kV, TUNNELFLEX-TTX 6/10kV, TUNNELFLEX-TTX 8.7/15kV, TUNNELFLEX-TTX 12/20kV, medium voltage tunneling cable, MV tunnel cable, DIN VDE 0295 Class 5, HEPR-MV insulation, 3GI3 classification, semi-conducting screen, PCP sheath cable, polychloroprene cable, anti-twisting braid, synthetic mesh cable, red sheath cable, tunnel boring machine cable, TBM power cable, underground mining cable, metro tunneling cable, railway tunnel cable, hydropower tunnel cable, Class 5 flexible conductor, 90°C conductor, short circuit rating, current carrying capacity, extruded screen cable, double sheath cable, mobile equipment cable, 3×25+3×25/3, 3×50+3×25/3, 3×95+3×50/3, 3×120+3×70/3, 3×185+3×95/3, 3×240+3×120/3, IEC 60502-2 cable, HD 620 cable, EPR medium voltage, micro-filtered insulation, TUNNELFLEX-TTX電纜, 中壓隧道電纜, 中壓柔性電纜, 隧道掘進機電纜, TBM電纜, HEPR-MV絕緣, 半導體屏蔽電纜, PCP護套電纜, 防扭電纜, 紅色護套電纜, 5類導體電纜, 地下採礦電纜, DIN VDE標準電纜, Anhui Feichun cable, Feichun Special Cable, 安徽飛純電纜