UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.

on17/06/2026

DR 724 P Spreader: PUR барабанный кабель для спредеров, моторных барабанов и контейнерных кранов

DR 724 P Spreader — это барабанный кабель PUR/TMPU для спредерных применений и тяжёлых динамических условий. Кабель предназначен для reeling applications с высокими механическими нагрузками, например для моторных барабанов в контейнерных кранах. Конструкция включает гибкие медные жилы класса 5, специальную полимерную изоляцию, центральный арамидный несущий элемент, внутреннюю оболочку PUR/TMPU, арамидную защитную сетку от скручивания и наружную оболочку PUR/TMPU чёрного цвета RAL 9005.

FLEXIDRUM® R 702: Advanced Salt-Spray Resistant Multi-Core Cable for Maritime Port Infrastructure and Container Handling Systems Engineered for extreme corrosive marine environments, the FLEXIDRUM® R 702 delivers proven salt-fog resistance combined with Class 5 flexible conductor technology, GAALTHERM® 630 thermoplastic insulation, and advanced anti-twisting textile reinforcement. Designed for automated container spreader bars, vertical lifting platforms, and offshore equipment exposed to continuous salt-spray cycles—meeting DIN VDE, EN, and IEC standards with reduced weight and diameter for enhanced installation flexibility in modern port automation infrastructure.

Technical Department

on20/05/2026

PROTOLON SMRT vs XPRT: Техническое Руководство по Выбору Кабеля

PROTOLON семейство кабелей разрабатывалось Prysmian Group на протяжении двух декад как ответ на эволюцию портового оборудования. Исторически, первые портовые краны (1980–1990) использовали более простые кабели с меньшими требованиями к скорости и гибкости. Но по мере того как портовые операции интенсифицировались и оборудование становилось быстрее (контейнерные краны STS с циклами 40–60 секунд вместо 5–10 минут), потребность в кабелях, способных выдерживать высокие скорости развертывания и динамические нагрузки, стала критической. PROTOLON SMRT (Standard Medium Reeling Technology) был введен как решение для кранов с **среднего уровня механическим напряжением**: скорость развертывания 160–200 м/мин, динамические нагрузки до 20 N/mm², типичные для портальных кранов и RTG (резиновошинных портовых краны) 1990–2010 годов разработки. PROTOLON XPRT (eXtreme Performance Reeling Technology) был введен позже (2000s–2010s) для **высокопроизводительных операций**: скорость развертывания 240 м/мин, динамические нагрузки до 25 N/mm², для самых современных STS кранов и мобильных портовых оборудований. Обе линейки соответствуют DIN VDE 0250-813, но с различными требованиями к гибкости и механической прочности проводника.

C PUR Design Integration: FLEXIFESTOON PUR characteristics (inherited): Outer sheath: PUR (polyurethane, compact) Insulation: Special TPE (superior elongation) Central unit: Textile (mechanical support) Weight: 25–30% lighter than standard rubber Diameter: 15–20% smaller than rubber equivalent Cost: +15–25% premium over rubber Service life: 10–15 years (extended) Screened design addition (new): Screen: Tinned copper braid (EMC shielding) Coverage: 80–90% (good EMC performance) Diameter impact: +2–3 mm (screen adds ~3 mm to diameter) Weight impact: +500 kg/km (braid + outer sheath) Cost: Additional +10–15% for screen layer Combined C PUR result: vs. Unscreened PUR (FLEXIFESTOON PUR): FLEXIFESTOON PUR: Minimal diameter/weight, no EMC C PUR: Slightly larger (screen added), excellent EMC Choice: PUR for maximum compactness (non-EMI environments) C PUR for VFD motors, confined spaces with EMC requirements vs. Standard rubber screened (GRDGCGÖU-J): GRDGCGÖU-J: Standard diameter, heavy, rubber durability C PUR: Compact diameter, lightweight, superior oil/chemical resistance Choice: GRDGCGÖU-J for simple temporary festoon C PUR for permanent industrial machine tool installation Nomenclature: FLEXIFESTOON® = Product family (flexible cable) C = Screen (copper braid, "C" from German "Schirm") PUR = Material (polyurethane jacket) Result: "FLEXIFESTOON C PUR" = Screened compact polyurethane cable

Technical Department

on15/05/2026

FLEXIFESTOON® C PUR

C PUR Design Integration: FLEXIFESTOON PUR characteristics (inherited): Outer sheath: PUR (polyurethane, compact) Insulation: Special TPE (superior elongation) Central unit: Textile (mechanical support) Weight: 25–30% lighter than standard rubber Diameter: 15–20% smaller than rubber equivalent Cost: +15–25% premium over rubber Service life: 10–15 years (extended) Screened design addition (new): Screen: Tinned copper braid (EMC shielding) Coverage: 80–90% (good EMC performance) Diameter impact: +2–3 mm (screen adds ~3 mm to diameter) Weight impact: +500 kg/km (braid + outer sheath) Cost: Additional +10–15% for screen layer Combined C PUR result: vs. Unscreened PUR (FLEXIFESTOON PUR): FLEXIFESTOON PUR: Minimal diameter/weight, no EMC C PUR: Slightly larger (screen added), excellent EMC Choice: PUR for maximum compactness (non-EMI environments) C PUR for VFD motors, confined spaces with EMC requirements vs. Standard rubber screened (GRDGCGÖU-J): GRDGCGÖU-J: Standard diameter, heavy, rubber durability C PUR: Compact diameter, lightweight, superior oil/chemical resistance Choice: GRDGCGÖU-J for simple temporary festoon C PUR for permanent industrial machine tool installation Nomenclature: FLEXIFESTOON® = Product family (flexible cable) C = Screen (copper braid, “C” from German “Schirm”) PUR = Material (polyurethane jacket) Result: “FLEXIFESTOON C PUR” = Screened compact polyurethane cable

PUR vs. Rubber Sheath Comparison: EPR/PCP rubber (traditional festoon): Base polymer: Ethylene-propylene or chloroprene rubber Density: ~1.2 g/cm³ (light) Young's modulus: ~2–8 MPa (soft, flexible) Tear strength: 15–30 kN/m (adequate) Tensile strength: 8–12 MPa (moderate) Oil resistance: Fair (EPR), Good (CPE) Cost: Low (commodity material) Typical life: 5–10 years PUR (polyurethane, FLEXIFESTOON PUR): Base polymer: Polyol + isocyanate urethane linkage Density: ~1.25 g/cm³ (slightly heavier per unit volume, but better properties) Young's modulus: ~10–15 MPa (stiffer, stronger) Tear strength: 30–50 kN/m (2–3× better than rubber) Tensile strength: 12–18 MPa (much stronger) Oil resistance: Excellent (far superior to rubber) Cost: Medium (specialty material) Typical life: 10–15 years (50–100% longer) PUR performance advantages: (1) Tear resistance: Mechanism: Urethane linkages form strong hydrogen bonds More rigid polymer network, resists crack propagation Consequence: Cable survives snagging on sharp edges Abrasion resistance 2–3× better than rubber Application: Machine tool environments (sharp metal edges, high speed) (2) Oil immersion durability: Rubber swelling in oil: 8–15% volume increase PUR swelling in oil: 2–5% volume increase (excellent stability) Result: Cable diameter remains stable, connections don't loosen No electrical performance degradation from oil ingress (3) Ozone & UV resistance: Rubber degradation rate: 10–20% strength loss per 5 years outdoor PUR degradation rate: 5–10% strength loss per 5 years outdoor Application: Outdoor machine tools, conveying systems in sunlight (4) Mechanical stress recovery: Rubber behavior: After bending, slow recovery (viscoelastic) PUR behavior: Rapid recovery, lower hysteresis loss Benefit: Lower heating during high-speed cycling 240 m/min reeling applications tolerate higher duty cycles Cost-benefit trade-off: PUR premium cost: +15–25% vs. standard rubber festoon cable Justification for premium: - 2× longer service life (10–15 years vs. 5–10 years) - Reduced maintenance/replacement downtime in industrial operations - Superior performance in aggressive environments (oil, chemicals) - Better value when cost-of-downtime is high (machine tools, production lines)

Technical Department

on15/05/2026

FLEXIFESTOON® PUR

PUR vs. Rubber Sheath Comparison: EPR/PCP rubber (traditional festoon): Base polymer: Ethylene-propylene or chloroprene rubber Density: ~1.2 g/cm³ (light) Young’s modulus: ~2–8 MPa (soft, flexible) Tear strength: 15–30 kN/m (adequate) Tensile strength: 8–12 MPa (moderate) Oil resistance: Fair (EPR), Good (CPE) Cost: Low (commodity material) Typical life: 5–10 years PUR (polyurethane, FLEXIFESTOON PUR): Base polymer: Polyol + isocyanate urethane linkage Density: ~1.25 g/cm³ (slightly heavier per unit volume, but better properties) Young’s modulus: ~10–15 MPa (stiffer, stronger) Tear strength: 30–50 kN/m (2–3× better than rubber) Tensile strength: 12–18 MPa (much stronger) Oil resistance: Excellent (far superior to rubber) Cost: Medium (specialty material) Typical life: 10–15 years (50–100% longer) PUR performance advantages: (1) Tear resistance: Mechanism: Urethane linkages form strong hydrogen bonds More rigid polymer network, resists crack propagation Consequence: Cable survives snagging on sharp edges Abrasion resistance 2–3× better than rubber Application: Machine tool environments (sharp metal edges, high speed) (2) Oil immersion durability: Rubber swelling in oil: 8–15% volume increase PUR swelling in oil: 2–5% volume increase (excellent stability) Result: Cable diameter remains stable, connections don’t loosen No electrical performance degradation from oil ingress (3) Ozone & UV resistance: Rubber degradation rate: 10–20% strength loss per 5 years outdoor PUR degradation rate: 5–10% strength loss per 5 years outdoor Application: Outdoor machine tools, conveying systems in sunlight (4) Mechanical stress recovery: Rubber behavior: After bending, slow recovery (viscoelastic) PUR behavior: Rapid recovery, lower hysteresis loss Benefit: Lower heating during high-speed cycling 240 m/min reeling applications tolerate higher duty cycles Cost-benefit trade-off: PUR premium cost: +15–25% vs. standard rubber festoon cable Justification for premium: – 2× longer service life (10–15 years vs. 5–10 years) – Reduced maintenance/replacement downtime in industrial operations – Superior performance in aggressive environments (oil, chemicals) – Better value when cost-of-downtime is high (machine tools, production lines)

EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption

Technical Department

on15/05/2026

FLEXIFESTOON® (N)GRDGCGÖU-J

EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn’t interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption

(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: - High bending flexibility (4×D minimum typical) - Fast rewind capability (240+ m/min rated speed) - Sustained torsion tolerance (±25°/1m continuous) - Extended temperature range (−50 to +80°C) - UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers

Technical Department

on15/05/2026

(N)GRDGÖU-J Festoon Cable

(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: – High bending flexibility (4×D minimum typical) – Fast rewind capability (240+ m/min rated speed) – Sustained torsion tolerance (±25°/1m continuous) – Extended temperature range (−50 to +80°C) – UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers

Single-mode fibres confine optical propagation to the fundamental LP₀₁ mode only — light travels essentially parallel to the fibre axis with minimal modal dispersion. Core: 9 μm diameter; cladding: 125 μm; cutoff wavelength: ~1,260 nm (ensuring only fundamental mode at 1,310/1,550 nm telecom bands). Advantage in reeling service: Modal dispersion (temporal spreading from different modes arriving at different velocities) is completely eliminated, enabling high-speed data (10–100 Gbps) over extended distances without signal degradation. For mission-critical automated port cranes transmitting high-definition video from STS gantry cameras, SMF is essential. Challenge: SMF is mechanically fragile — the 9 μm core is minuscule; any microbend creates mode coupling (fundamental mode energy leaks to radiated/cladding modes), causing signal loss. RHEYCORD®-OFE loose-tube jelly-fill is engineered to minimize mechanical stress on SMF.

Technical Department

on23/04/2026

RHEYCORD®-OFE Dynamic Optical Fibre Reeling Cable: Photonics-Electromagnetics-Materials Physics Deep-Dive

Single-mode fibres confine optical propagation to the fundamental LP₀₁ mode only — light travels essentially parallel to the fibre axis with minimal modal dispersion. Core: 9 μm diameter; cladding: 125 μm; cutoff wavelength: ~1,260 nm (ensuring only fundamental mode at 1,310/1,550 nm telecom bands). Advantage in reeling service: Modal dispersion (temporal spreading from different modes arriving at different velocities) is completely eliminated, enabling high-speed data (10–100 Gbps) over extended distances without signal degradation. For mission-critical automated port cranes transmitting high-definition video from STS gantry cameras, SMF is essential. Challenge: SMF is mechanically fragile — the 9 μm core is minuscule; any microbend creates mode coupling (fundamental mode energy leaks to radiated/cladding modes), causing signal loss. RHEYCORD®-OFE loose-tube jelly-fill is engineered to minimize mechanical stress on SMF.

Comprehensive technical article for industrial automation engineers, crane integrators, control system designers, and equipment procurement teams covering: the physics of simultaneous tensile-torsion stress in motorised drum and drumspreader applications; RTS (Rheyflex Technical Standard) ultra-fine copper stranding technology with IEC 60228 Class 5 equivalent or superior performance; RHEYCLEAN EPDM insulation chemistry optimised for flex-cycle endurance and temperature extremes; VDE 0250-814 certification and 200–240 m/min high-speed reeling capability; mechanical stress analysis for motor-driven reels with acceleration/deceleration transients; drumspreader load distribution engineering; festoon system dynamics; and application-specific cable selection for spring-operated reels, emergency lowering systems, and hoisting equipment.

Technical Department

on22/04/2026

RHEYCORD® (RTS) (N)SHTOEU-J Extra Heavy Duty Reeling Cables: Advanced Engineering for Simultaneous Tensile and Torsion Stress in Motor-Driven Reels, Drumspreaders, and Automation Festoon Systems

Comprehensive technical article for industrial automation engineers, crane integrators, control system designers, and equipment procurement teams covering: the physics of simultaneous tensile-torsion stress in motorised drum and drumspreader applications; RTS (Rheyflex Technical Standard) ultra-fine copper stranding technology with IEC 60228 Class 5 equivalent or superior performance; RHEYCLEAN EPDM insulation chemistry optimised for flex-cycle endurance and temperature extremes; VDE 0250-814 certification and 200–240 m/min high-speed reeling capability; mechanical stress analysis for motor-driven reels with acceleration/deceleration transients; drumspreader load distribution engineering; festoon system dynamics; and application-specific cable selection for spring-operated reels, emergency lowering systems, and hoisting equipment.