[email protected]

IEC 60228

3 Min Read
BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan
Technical Department
on17/05/2026

YSLTOE

BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan
4 Min Read
H07RN-F: Advanced High-Flexibility Salt-Fog Resistant Port Cable Engineering Solution Specialized rubber-sheathed electrical cable engineered for extreme maritime and coastal port environments. H07RN-F combines superior mechanical flexibility (4×D minimum fixed-laying bending radius, 6×D flexible-application capability) with comprehensive salt-fog environmental resistance, enabling reliable 450/750V power distribution and control signaling in container gantry systems, ship loaders, and port automation infrastructure where conventional cables fail within 6–12 months of deployment.
Technical Department
on15/05/2026

H07RN-F

H07RN-F: Advanced High-Flexibility Salt-Fog Resistant Port Cable Engineering Solution Specialized rubber-sheathed electrical cable engineered for extreme maritime and coastal port environments. H07RN-F combines superior mechanical flexibility (4×D minimum fixed-laying bending radius, 6×D flexible-application capability) with comprehensive salt-fog environmental resistance, enabling reliable 450/750V power distribution and control signaling in container gantry systems, ship loaders, and port automation infrastructure where conventional cables fail within 6–12 months of deployment.
3 Min Read
FLEXIFESTOON® PV-FLAT UL: High-Flexibility Salt-Fog Resistant Flat Festoon Cable for Port Operations, Marine Equipment, and Harbor Automation Systems Feichun's FLEXIFESTOON® PV-FLAT UL establishes a new performance paradigm for port-duty electrical infrastructure by combining three critical engineering requirements into unified cable architecture: extreme mechanical flexibility enabling 5×D minimum bending radius and 120 m/min festoon deployment on container gantries and ship loaders; comprehensive salt-fog environmental resistance through specialized PVC compound formulation with enhanced corrosion inhibitors surviving ASTM B117 salt-spray testing protocols characteristic of extreme coastal and offshore environments; and verified 600V/2000V dual-voltage certification (UL 1581, CSA approved) supporting both power distribution and precision automation signal transmission across the world's most demanding port and maritime cargo-handling operations.
Technical Department
on15/05/2026

FLEXIFESTOON® PV-FLAT UL

FLEXIFESTOON® PV-FLAT UL: High-Flexibility Salt-Fog Resistant Flat Festoon Cable for Port Operations, Marine Equipment, and Harbor Automation Systems Feichun’s FLEXIFESTOON® PV-FLAT UL establishes a new performance paradigm for port-duty electrical infrastructure by combining three critical engineering requirements into unified cable architecture: extreme mechanical flexibility enabling 5×D minimum bending radius and 120 m/min festoon deployment on container gantries and ship loaders; comprehensive salt-fog environmental resistance through specialized PVC compound formulation with enhanced corrosion inhibitors surviving ASTM B117 salt-spray testing protocols characteristic of extreme coastal and offshore environments; and verified 600V/2000V dual-voltage certification (UL 1581, CSA approved) supporting both power distribution and precision automation signal transmission across the world’s most demanding port and maritime cargo-handling operations.
13 Min Read
FLEXIFESTOON® PV-FLAT CY (VCVH6-F): Advanced High-Flexibility Flat Cable with Superior Anti-Salt Fog Protection for Port Equipment and Festoon Cargo-Handling Systems Professional-grade parallel-core flat cable engineered for aggressive marine environments. Features flexible red copper Class 5 conductors, PVC TI2 insulation, 10×D bending radius, UV/ozone/chemical resistance, and comprehensive salt-fog protection for automated port infrastructure, ship-to-shore cranes, cargo-handling equipment, and festoon systems operating at deployment velocities up to 120 m/min across high-corrosion maritime zones.
Technical Department
on13/05/2026

FLEXIFESTOON® PV-FLAT CY (VCVH6-F)

FLEXIFESTOON® PV-FLAT CY (VCVH6-F): Advanced High-Flexibility Flat Cable with Superior Anti-Salt Fog Protection for Port Equipment and Festoon Cargo-Handling Systems Professional-grade parallel-core flat cable engineered for aggressive marine environments. Features flexible red copper Class 5 conductors, PVC TI2 insulation, 10×D bending radius, UV/ozone/chemical resistance, and comprehensive salt-fog protection for automated port infrastructure, ship-to-shore cranes, cargo-handling equipment, and festoon systems operating at deployment velocities up to 120 m/min across high-corrosion maritime zones.
5 Min Read
FLEXIFESTOON® SPECIAL NE-FLAT: Advanced High-Temperature Flat Cable for Steel Mills, Petrochemical Plants, Renewable Energy Systems, and Extreme-Environment Industrial Control Feichun's revolutionary FLEXIFESTOON® SPECIAL NE-FLAT high-temperature cable platform delivers extreme thermal resilience (+135°C continuous flexible application with GAALTHERM® 533 insulation, or +90°C with XLPE), combined with halogen-free environmental compliance, 50 Mrad radiation hardening, and ultra-flexible parallel-core architecture enabling deployment in the world's most thermally demanding industrial environments—steel production, petrochemical processing, renewable energy infrastructure, and advanced thermal management systems.
Technical Department
on13/05/2026

FLEXIFESTOON® SPECIAL NE-FLAT

FLEXIFESTOON® SPECIAL NE-FLAT: Advanced High-Temperature Flat Cable for Steel Mills, Petrochemical Plants, Renewable Energy Systems, and Extreme-Environment Industrial Control Feichun’s revolutionary FLEXIFESTOON® SPECIAL NE-FLAT high-temperature cable platform delivers extreme thermal resilience (+135°C continuous flexible application with GAALTHERM® 533 insulation, or +90°C with XLPE), combined with halogen-free environmental compliance, 50 Mrad radiation hardening, and ultra-flexible parallel-core architecture enabling deployment in the world’s most thermally demanding industrial environments—steel production, petrochemical processing, renewable energy infrastructure, and advanced thermal management systems.
3 Min Read
FLEXIFESTOON® NE FLAT M(StD)HÖU-J/O UL: Advanced UL-Certified Screened Flat Cable for Medical Devices, Industrial Control, and Radiation-Hardened Applications Feichun's FLEXIFESTOON® NE FLAT M(StD)HÖU-J/O UL represents the highest standard in certified industrial control cables: comprehensive electromagnetic shielding (tinned copper + aluminum tape), UL-listed safety certification (AWM Style 4540, FT-1 600V), radiation hardening to 50 Mrad, and dual-pair twisted-core architecture engineered for medical equipment, aerospace systems, and mission-critical industrial control applications requiring uncompromising reliability standards. 1. Executive Overview: UL-Certified Reliability Standards for Mission-Critical Applications Global medical device manufacturers, aerospace system integrators, and industrial automation specialists face unprecedented reliability requirements. Patient safety regulations (FDA 510(k), CE-Mark MDR), aerospace qualification standards (AS9100, MIL-DTL specifications), and nuclear facility protocols mandate cable systems meeting multiple independent certification frameworks: electrical safety (UL 1581 listing), electromagnetic compatibility (EMI shielding effectiveness), radiation immunity (up to 50 Mrad exposure), and mechanical reliability across extreme environmental conditions (-40°C to +90°C operational bandwidth). FLEXIFESTOON® NE FLAT M(StD)HÖU-J/O UL consolidates these demanding requirements into a single optimized platform combining UL safety approval, comprehensive electromagnetic shielding architecture, demonstrated 50 Mrad radiation hardening, and mechanical flexibility enabling deployment in compact aerospace/medical equipment installations requiring minimal installation footprint.
Technical Department
on13/05/2026

M(StD)HÖU-J/O

FLEXIFESTOON® NE FLAT M(StD)HÖU-J/O UL: Advanced UL-Certified Screened Flat Cable for Medical Devices, Industrial Control, and Radiation-Hardened Applications Feichun’s FLEXIFESTOON® NE FLAT M(StD)HÖU-J/O UL represents the highest standard in certified industrial control cables: comprehensive electromagnetic shielding (tinned copper + aluminum tape), UL-listed safety certification (AWM Style 4540, FT-1 600V), radiation hardening to 50 Mrad, and dual-pair twisted-core architecture engineered for medical equipment, aerospace systems, and mission-critical industrial control applications requiring uncompromising reliability standards. 1. Executive Overview: UL-Certified Reliability Standards for Mission-Critical Applications Global medical device manufacturers, aerospace system integrators, and industrial automation specialists face unprecedented reliability requirements. Patient safety regulations (FDA 510(k), CE-Mark MDR), aerospace qualification standards (AS9100, MIL-DTL specifications), and nuclear facility protocols mandate cable systems meeting multiple independent certification frameworks: electrical safety (UL 1581 listing), electromagnetic compatibility (EMI shielding effectiveness), radiation immunity (up to 50 Mrad exposure), and mechanical reliability across extreme environmental conditions (-40°C to +90°C operational bandwidth). FLEXIFESTOON® NE FLAT M(StD)HÖU-J/O UL consolidates these demanding requirements into a single optimized platform combining UL safety approval, comprehensive electromagnetic shielding architecture, demonstrated 50 Mrad radiation hardening, and mechanical flexibility enabling deployment in compact aerospace/medical equipment installations requiring minimal installation footprint.
2 Min Read
FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun's revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.
Technical Department
on13/05/2026

FLAT (NGFLGÖU) UL Reeling Cable

FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun’s revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.
3 Min Read
FLEXIFESTOON® NE-FLAT CY (N)GFLCGÖU: Advanced Screened EMI-Protected Flat Cable for Industrial Automation, Festoon Systems, and Electromagnetic Noise Immunity Applications 0.6/1 kV Screened Control Cable | Tinned Copper Braid EMI/RFI Shielding | EPR Rubber Insulation | Parallel Core Stranding | 180 m/min Festoon Deployment | High-Flexibility Architecture
Technical Department
on13/05/2026

FLEXIFESTOON® NE-FLAT CY (N)GFLCGÖU

FLEXIFESTOON® NE-FLAT CY (N)GFLCGÖU: Advanced Screened EMI-Protected Flat Cable for Industrial Automation, Festoon Systems, and Electromagnetic Noise Immunity Applications 0.6/1 kV Screened Control Cable | Tinned Copper Braid EMI/RFI Shielding | EPR Rubber Insulation | Parallel Core Stranding | 180 m/min Festoon Deployment | High-Flexibility Architecture
3 Min Read
FLEXIFESTOON® HF-FLAT CY: Advanced Screened Halogen-Free Flat Cable System for Industrial Automation, Variable Frequency Drives, and EMI-Critical Control Systems 0.6/1 kV Shielded Power and Control Cable | Red Copper Braid EMI/RFI Protection | Electromagnetic Signal Integrity | Low Smoke Emission | Nuclear Plant Certified Electromagnetic Shielding Halogen-Free Extended Temperature Signal Integrity Modern industrial automation environments are under siege from electromagnetic interference (EMI). Variable frequency drives (VFDs), inverters, switched-mode power supplies, and wireless control systems generate broadband electromagnetic noise creating a hostile environment for signal integrity and cable performance. Conventional unshielded festoon cables, adequate for simple motor-contactor systems, fail catastrophically when deployed in VFD-driven installations—electromagnetic coupling generates false signals, nuisance equipment trips, and progressive insulation degradation. Feichun's FLEXIFESTOON® HF-FLAT CY introduces revolutionary screened flat cable architecture combining comprehensive red copper braid electromagnetic shielding, halogen-free safety chemistry, and parallel core stranding optimized for electromagnetic signal protection in industrial automation systems. This technical examination explores electromagnetic interference mechanisms, shielding design principles, VFD compatibility architecture, and operational deployment advantages of the industry's most comprehensive EMI-protected flat festoon cable platform.
Technical Department
on13/05/2026

FLEXIFESTOON® HF-FLAT CY

FLEXIFESTOON® HF-FLAT CY: Advanced Screened Halogen-Free Flat Cable System for Industrial Automation, Variable Frequency Drives, and EMI-Critical Control Systems 0.6/1 kV Shielded Power and Control Cable | Red Copper Braid EMI/RFI Protection | Electromagnetic Signal Integrity | Low Smoke Emission | Nuclear Plant Certified Electromagnetic Shielding Halogen-Free Extended Temperature Signal Integrity Modern industrial automation environments are under siege from electromagnetic interference (EMI). Variable frequency drives (VFDs), inverters, switched-mode power supplies, and wireless control systems generate broadband electromagnetic noise creating a hostile environment for signal integrity and cable performance. Conventional unshielded festoon cables, adequate for simple motor-contactor systems, fail catastrophically when deployed in VFD-driven installations—electromagnetic coupling generates false signals, nuisance equipment trips, and progressive insulation degradation. Feichun’s FLEXIFESTOON® HF-FLAT CY introduces revolutionary screened flat cable architecture combining comprehensive red copper braid electromagnetic shielding, halogen-free safety chemistry, and parallel core stranding optimized for electromagnetic signal protection in industrial automation systems. This technical examination explores electromagnetic interference mechanisms, shielding design principles, VFD compatibility architecture, and operational deployment advantages of the industry’s most comprehensive EMI-protected flat festoon cable platform.
5 Min Read
FLEXIFESTOON® HF-FLAT: Advanced Halogen-Free Flat Cable System for Industrial Cranes, Material Handling Equipment, and Festoon Track Applications 0.6/1 kV Power and Control Cable | Parallel Stranding Architecture | Low Smoke Emission | Nuclear Plant Certified | Flexible Deployment Halogen-Free Design Low Smoke Emission Extended Temperature Flat Configuration Industrial material handling environments present a paradox: equipment must operate continuously under mechanical stress while meeting increasingly stringent safety and environmental regulations. Conventional PVC-based festoon cables, the industry standard for overhead cranes and monorail systems, release highly corrosive and toxic gases during thermal incidents—a critical safety liability in confined spaces (enclosed factories, underground mining operations, nuclear facilities). Feichun's FLEXIFESTOON® HF-FLAT introduces a revolutionary flat cable architecture combining halogen-free polymer chemistry, parallel core stranding for superior mechanical flexibility, and low-smoke-emission technology specifically optimized for material handling applications where safety margins cannot be compromised. This technical examination explores the advanced material science, mechanical engineering principles, regulatory compliance framework, and operational deployment advantages of the industry's most flexible and safety-optimized festoon cable platform.
Technical Department
on13/05/2026

FLEXIFESTOON® HF-FLAT

FLEXIFESTOON® HF-FLAT: Advanced Halogen-Free Flat Cable System for Industrial Cranes, Material Handling Equipment, and Festoon Track Applications 0.6/1 kV Power and Control Cable | Parallel Stranding Architecture | Low Smoke Emission | Nuclear Plant Certified | Flexible Deployment Halogen-Free Design Low Smoke Emission Extended Temperature Flat Configuration Industrial material handling environments present a paradox: equipment must operate continuously under mechanical stress while meeting increasingly stringent safety and environmental regulations. Conventional PVC-based festoon cables, the industry standard for overhead cranes and monorail systems, release highly corrosive and toxic gases during thermal incidents—a critical safety liability in confined spaces (enclosed factories, underground mining operations, nuclear facilities). Feichun’s FLEXIFESTOON® HF-FLAT introduces a revolutionary flat cable architecture combining halogen-free polymer chemistry, parallel core stranding for superior mechanical flexibility, and low-smoke-emission technology specifically optimized for material handling applications where safety margins cannot be compromised. This technical examination explores the advanced material science, mechanical engineering principles, regulatory compliance framework, and operational deployment advantages of the industry’s most flexible and safety-optimized festoon cable platform.
6 Min Read
FLEXIDRUM® MEDIUM RS-T: Advanced Anti-Twisting Cable for Mining Excavators and Heavy-Duty Industrial Applications A comprehensive technical analysis of Feichun's purpose-engineered anti-twisting cable platform (1.8/3 kV to 18/30 kV voltage grades) featuring specialized synthetic yarn torsion protection, tinned copper conductors, EPR Type 3GI3 insulation, and tear-resistant wrapping technology—delivering exceptional mechanical durability in open-cast mining environments characterized by extreme mechanical abrasion, dynamic cable movement, and continuous torsional stress exposure.
Technical Department
on12/05/2026

RS-T (N)TSCGEWÖU

FLEXIDRUM® MEDIUM RS-T: Advanced Anti-Twisting Cable for Mining Excavators and Heavy-Duty Industrial Applications A comprehensive technical analysis of Feichun’s purpose-engineered anti-twisting cable platform (1.8/3 kV to 18/30 kV voltage grades) featuring specialized synthetic yarn torsion protection, tinned copper conductors, EPR Type 3GI3 insulation, and tear-resistant wrapping technology—delivering exceptional mechanical durability in open-cast mining environments characterized by extreme mechanical abrasion, dynamic cable movement, and continuous torsional stress exposure.
16 Min Read
Advanced High-Flexibility Salt-Fog Resistant Port Cable: Engineering Excellence for Extreme Maritime Environments A comprehensive technical deep-dive into Feichun's purpose-engineered high-flexibility port cable platform combining advanced electrochemical conductor protection, specialized EPR insulation, proprietary hydrophobic semi-conductive interfaces, and innovative outer-sheath chemistry—delivering extended service-life durability (12–15+ years field-validated) for demanding dredging, pumping, and floating-crane applications operating in harsh tropical and subtropical saltwater port facilities worldwide.
Technical Department
on12/05/2026

FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU

Advanced High-Flexibility Salt-Fog Resistant Port Cable: Engineering Excellence for Extreme Maritime Environments A comprehensive technical deep-dive into Feichun’s purpose-engineered high-flexibility port cable platform combining advanced electrochemical conductor protection, specialized EPR insulation, proprietary hydrophobic semi-conductive interfaces, and innovative outer-sheath chemistry—delivering extended service-life durability (12–15+ years field-validated) for demanding dredging, pumping, and floating-crane applications operating in harsh tropical and subtropical saltwater port facilities worldwide.
6 Min Read
FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E: Professional Shielded Submersible Cable with Integrated Core Copper Screen for Dredgers, Pumps, VFD Systems, and Electromagnetic Noise-Sensitive Water Infrastructure Purpose-engineered shielded submersible cable combining advanced water-submersion protection with electromagnetic noise immunity. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E integrates core copper screen shielding laid concentrically around power conductors, Class 5 tinned copper conductors (IEC 60228), advanced EPR insulation, and specialized water-resistant outer sheath (PCP Type 5GM3) to achieve 15+ year service life in demanding dredger systems, submersible pump installations, and VFD-controlled water infrastructure where electrical reliability and electromagnetic compatibility converge with water-submersion durability requirements. Executive Summary: Integrated Shielding and Water-Submersion Engineering for Next-Generation Dredging Systems Modern dredging and submersible pump systems increasingly employ variable-frequency drive (VFD) motor control and sophisticated sensor networks, creating electromagnetic environment incompatible with conventional unshielded cables. Simultaneously, VFD switching frequencies (5–20 kHz) generate high-frequency noise coupling into unshielded power circuits, causing sensor errors, control circuit malfunctions, and safety system failures. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E represents a breakthrough in submersible cable engineering, integrating comprehensive copper screen shielding with water-submersion durability to address the convergence of electromagnetic noise immunity and continuous water-immersion requirements. Traditional submersible cables lack electromagnetic shielding entirely, accepting noise-induced failures as operational cost in VFD-driven systems. Conversely, conventional shielded marine cables deteriorate rapidly in water-submersion environments, with shielding effectiveness degrading within 2–4 years as moisture penetrates underlying insulation and corrosion attacks copper screen geometry. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E overcomes both limitations through revolutionary integrated design: core copper screen shielding laid concentrically around each power conductor providing continuous EMI/RFI attenuation (>60 dB typical across 50 Hz to 10 MHz frequency range), tinned copper screen construction enabling superior electrochemical corrosion resistance in water-submersion environments, and water-resistant outer sheath (PCP Type 5GM3) maintaining shielding integrity through 15+ years of continuous seawater/brackish-water immersion.
Technical Department
on12/05/2026

(N)TSCGEWÖU WATER…/3E

FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E: Professional Shielded Submersible Cable with Integrated Core Copper Screen for Dredgers, Pumps, VFD Systems, and Electromagnetic Noise-Sensitive Water Infrastructure Purpose-engineered shielded submersible cable combining advanced water-submersion protection with electromagnetic noise immunity. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E integrates core copper screen shielding laid concentrically around power conductors, Class 5 tinned copper conductors (IEC 60228), advanced EPR insulation, and specialized water-resistant outer sheath (PCP Type 5GM3) to achieve 15+ year service life in demanding dredger systems, submersible pump installations, and VFD-controlled water infrastructure where electrical reliability and electromagnetic compatibility converge with water-submersion durability requirements. Executive Summary: Integrated Shielding and Water-Submersion Engineering for Next-Generation Dredging Systems Modern dredging and submersible pump systems increasingly employ variable-frequency drive (VFD) motor control and sophisticated sensor networks, creating electromagnetic environment incompatible with conventional unshielded cables. Simultaneously, VFD switching frequencies (5–20 kHz) generate high-frequency noise coupling into unshielded power circuits, causing sensor errors, control circuit malfunctions, and safety system failures. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E represents a breakthrough in submersible cable engineering, integrating comprehensive copper screen shielding with water-submersion durability to address the convergence of electromagnetic noise immunity and continuous water-immersion requirements. Traditional submersible cables lack electromagnetic shielding entirely, accepting noise-induced failures as operational cost in VFD-driven systems. Conversely, conventional shielded marine cables deteriorate rapidly in water-submersion environments, with shielding effectiveness degrading within 2–4 years as moisture penetrates underlying insulation and corrosion attacks copper screen geometry. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER /3E overcomes both limitations through revolutionary integrated design: core copper screen shielding laid concentrically around each power conductor providing continuous EMI/RFI attenuation (>60 dB typical across 50 Hz to 10 MHz frequency range), tinned copper screen construction enabling superior electrochemical corrosion resistance in water-submersion environments, and water-resistant outer sheath (PCP Type 5GM3) maintaining shielding integrity through 15+ years of continuous seawater/brackish-water immersion.
2 Min Read
FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER: Professional Submersible Water-Resistant Cable for Dredgers, Pumps, Waste-Water Systems, and Extended-Voltage Submersed Applications Purpose-engineered submersible cable delivering exceptional durability and electrical performance in aggressive water environments. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER combines Class 5 ultra-flexible tinned copper conductors (IEC 60228), advanced EPR insulation technology, and specialized water-resistant outer sheath (PCP Type 5GM3) to achieve 15+ year service life in demanding applications including dredger equipment, submersible pump systems, waste-water treatment facilities, and brackish/salt-water environments. Extended voltage platform (1.8/3 kV through 18/30 kV nominal) accommodates complete industrial water-system electrical hierarchies with unified cable platform.
Technical Department
on12/05/2026

FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER

FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER: Professional Submersible Water-Resistant Cable for Dredgers, Pumps, Waste-Water Systems, and Extended-Voltage Submersed Applications Purpose-engineered submersible cable delivering exceptional durability and electrical performance in aggressive water environments. FLEXIDRUM® MEDIUM (N)TSCGEWÖU WATER combines Class 5 ultra-flexible tinned copper conductors (IEC 60228), advanced EPR insulation technology, and specialized water-resistant outer sheath (PCP Type 5GM3) to achieve 15+ year service life in demanding applications including dredger equipment, submersible pump systems, waste-water treatment facilities, and brackish/salt-water environments. Extended voltage platform (1.8/3 kV through 18/30 kV nominal) accommodates complete industrial water-system electrical hierarchies with unified cable platform.
2 Min Read
FLEXIDRUM® MEDIUM R 903: Professional Marine-Grade High-Flexibility Port Cable with Advanced Salt-Fog Resistance for Harbor Infrastructure and Offshore Lifting Applications Purpose-engineered marine cable delivering exceptional durability and electrical performance in aggressive port environments. FLEXIDRUM® MEDIUM R 903 combines Class 5 ultra-flexible red copper conductors (IEC 60228), advanced EPR insulation technology, and specialized salt-fog resistant outer sheath to achieve 15+ year service life in demanding harbor infrastructure including gantry cranes, container terminals, offshore lifting equipment, and inter-terminal transport systems. Nominal voltage range 3.6 kV to 12/20 kV accommodates complete port electrical hierarchies with unified cable platform.
Technical Department
on12/05/2026

FLEXIDRUM® MEDIUM R 903

FLEXIDRUM® MEDIUM R 903: Professional Marine-Grade High-Flexibility Port Cable with Advanced Salt-Fog Resistance for Harbor Infrastructure and Offshore Lifting Applications Purpose-engineered marine cable delivering exceptional durability and electrical performance in aggressive port environments. FLEXIDRUM® MEDIUM R 903 combines Class 5 ultra-flexible red copper conductors (IEC 60228), advanced EPR insulation technology, and specialized salt-fog resistant outer sheath to achieve 15+ year service life in demanding harbor infrastructure including gantry cranes, container terminals, offshore lifting equipment, and inter-terminal transport systems. Nominal voltage range 3.6 kV to 12/20 kV accommodates complete port electrical hierarchies with unified cable platform.
4 Min Read
FLEXIDRUM® MEDIUM PLUS (N)TSCGEWÖU: Revolutionary Ultra-High-Speed Extended-Voltage Hybrid Power-Signal-Optical Cable for Next-Generation Mega-Port Automation, Offshore Mobile Lifting, and Advanced Forced-Guidance Systems Breakthrough next-generation hybrid electrical-optical cable engineered for the extreme-speed, extended-voltage, and real-time-telemetry requirements of modern mega-port gantry cranes, offshore mobile lifting platforms, and next-generation automated container-handling infrastructure. FLEXIDRUM® MEDIUM PLUS combines Class 5 ultra-flexible red copper conductors, EPR type 3GI3 thermoplastic rubber insulation, integrated 12–24 fiber-optic elements, advanced anti-twisting synthetic yarn reinforcement, and specialized salt-fog-resistant PCP outer sheath to deliver unified electrical power-signal-optical distribution at unprecedented 300 m/min maximum deployment speed (highest industry capability) across extended voltage range 3.6 kV to 18/30 kV, with proven reliability across −35 to +80°C operational envelope and comprehensive DIN VDE / EN / IEC marine and port automation certification.
Technical Department
on12/05/2026

FLEXIDRUM® MEDIUM PLUS (N)TSCGEWÖU OPTICAL FIBER

FLEXIDRUM® MEDIUM PLUS (N)TSCGEWÖU: Revolutionary Ultra-High-Speed Extended-Voltage Hybrid Power-Signal-Optical Cable for Next-Generation Mega-Port Automation, Offshore Mobile Lifting, and Advanced Forced-Guidance Systems Breakthrough next-generation hybrid electrical-optical cable engineered for the extreme-speed, extended-voltage, and real-time-telemetry requirements of modern mega-port gantry cranes, offshore mobile lifting platforms, and next-generation automated container-handling infrastructure. FLEXIDRUM® MEDIUM PLUS combines Class 5 ultra-flexible red copper conductors, EPR type 3GI3 thermoplastic rubber insulation, integrated 12–24 fiber-optic elements, advanced anti-twisting synthetic yarn reinforcement, and specialized salt-fog-resistant PCP outer sheath to deliver unified electrical power-signal-optical distribution at unprecedented 300 m/min maximum deployment speed (highest industry capability) across extended voltage range 3.6 kV to 18/30 kV, with proven reliability across −35 to +80°C operational envelope and comprehensive DIN VDE / EN / IEC marine and port automation certification.
12 Min Read
FLEXIDRUM® R 902 Optical Fiber Hybrid Cable: Integrated Power-Plus-Fiber-Optics Multi-Core Cable for Mining Excavators and Real-Time Data Transmission Revolutionary hybrid power-and-optical-fiber cable engineered for mining excavators and outdoor industrial equipment, FLEXIDRUM® R 902 integrates 6-fiber optics (multimode 62.5/125µm) with Class 5 flexible red copper power conductors (up to 3×300 mm²), advanced EPR insulation, semi-conductive protective layers, and specialized UV/ozone/moisture-resistant PUR sheath. Rated for 3.6/6 kV to 12/20 kV deployment, featuring 120 m/min speed capability with reduced weight and diameter—enabling real-time data communication from excavators, loaders, and remote mining equipment while maintaining full electrical power distribution in one unified integrated cable system.
Technical Department
on12/05/2026

FLEXIDRUM® MEDIUM R 902 OPTICAL FIBER

FLEXIDRUM® R 902 Optical Fiber Hybrid Cable: Integrated Power-Plus-Fiber-Optics Multi-Core Cable for Mining Excavators and Real-Time Data Transmission Revolutionary hybrid power-and-optical-fiber cable engineered for mining excavators and outdoor industrial equipment, FLEXIDRUM® R 902 integrates 6-fiber optics (multimode 62.5/125µm) with Class 5 flexible red copper power conductors (up to 3×300 mm²), advanced EPR insulation, semi-conductive protective layers, and specialized UV/ozone/moisture-resistant PUR sheath. Rated for 3.6/6 kV to 12/20 kV deployment, featuring 120 m/min speed capability with reduced weight and diameter—enabling real-time data communication from excavators, loaders, and remote mining equipment while maintaining full electrical power distribution in one unified integrated cable system.
10 Min Read
GAALFLEX® SAFE CY: Shielded Intrinsically Safe Multi-Core Control Cable for Hazardous Area Measurement Systems (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Tinned Copper Braid Electromagnetic Interference Screen with Optimized Capacitance
Technical Department
on11/05/2026

GAALFLEX® SAFE CY Lean

GAALFLEX® SAFE CY: Shielded Intrinsically Safe Multi-Core Control Cable for Hazardous Area Measurement Systems (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Tinned Copper Braid Electromagnetic Interference Screen with Optimized Capacitance
8 Min Read
GAALFLEX® SAFE: Intrinsically Safe Multi-Core Control Cable for Hazardous Area Equipment (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Blue PVC Type TM2 Outer Sheath per DIN VDE 0207, ATEX II 2G Intrinsic Safety Certification with Optimized Cable Capacitance/Inductance Parameters per EN 60079-14 Section 12.2.2, VDE 0165 Part 1 Approval, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 part 332-1-2 / IEC 60332-1-2, Water-Resistant per IEC 60811-402 and EN 50396, Oil-Resistant per CEI 20-34/2-1, Low Halogenated Decomposition Products per EN 50267-2, 15×D Minimum Bending Radius for Flexible Installation in Hazardous Equipment, Multi-Core Architecture with 2 to 64 Core Configurations, 0.5 mm² to 10 mm² Cross-Section Range per Core, Standardized SKU Portfolio (60+ Configurations), Optional Color-Numbered Cores per EN 50334, Engineered for Oil & Gas Drilling Platforms, Underground Coal & Metal Mining Operations, Chemical Processing Plants, Pharmaceutical Manufacturing Facilities, Food & Beverage Processing in Hazardous Zones, Petrochemical Refineries, Explosive Atmosphere Detection and Control Systems, and Classified Hazardous Area Electrical Distribution): Comprehensive Advanced Intrinsic Safety Control Cable Architecture Analysis Integrating Explosion-Proof Certification Chemistry, Hazardous Area Compliance Mechanisms, Intrinsic Safety Parameter Design, Class 5 Ultra-Flexible Conductor Mechanics, Water-Immersion Durability Engineering, Safety Barrier Circuit Integration Strategies, Class I Division 1/2 Equipment Wiring Specifications, ATEX II 2G Safety-Critical Cable Design, and Next-Generation Hazardous-Area-Compliant Electrical Distribution for Class I Division 1/2, ATEX II 2G, and Classified Explosive Atmosphere Equipment Requiring Intrinsically Safe Multi-Core Control Cable with Proven Hazardous-Area-Grade PVC Chemistry, Extreme Temperature Stability (−40 to +80°C), DIN EN 60079-14 Intrinsic Safety Certification, IEC 60811-402 Water-Immersion Durability, CEI 20-34/2-1 Oil-Resistance, and Seamless Integration into Hazard-Compliant Electrical Distribution Architectures
Technical Department
on11/05/2026

GAALFLEX® SAFE

GAALFLEX® SAFE: Intrinsically Safe Multi-Core Control Cable for Hazardous Area Equipment (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Blue PVC Type TM2 Outer Sheath per DIN VDE 0207, ATEX II 2G Intrinsic Safety Certification with Optimized Cable Capacitance/Inductance Parameters per EN 60079-14 Section 12.2.2, VDE 0165 Part 1 Approval, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 part 332-1-2 / IEC 60332-1-2, Water-Resistant per IEC 60811-402 and EN 50396, Oil-Resistant per CEI 20-34/2-1, Low Halogenated Decomposition Products per EN 50267-2, 15×D Minimum Bending Radius for Flexible Installation in Hazardous Equipment, Multi-Core Architecture with 2 to 64 Core Configurations, 0.5 mm² to 10 mm² Cross-Section Range per Core, Standardized SKU Portfolio (60+ Configurations), Optional Color-Numbered Cores per EN 50334, Engineered for Oil & Gas Drilling Platforms, Underground Coal & Metal Mining Operations, Chemical Processing Plants, Pharmaceutical Manufacturing Facilities, Food & Beverage Processing in Hazardous Zones, Petrochemical Refineries, Explosive Atmosphere Detection and Control Systems, and Classified Hazardous Area Electrical Distribution): Comprehensive Advanced Intrinsic Safety Control Cable Architecture Analysis Integrating Explosion-Proof Certification Chemistry, Hazardous Area Compliance Mechanisms, Intrinsic Safety Parameter Design, Class 5 Ultra-Flexible Conductor Mechanics, Water-Immersion Durability Engineering, Safety Barrier Circuit Integration Strategies, Class I Division 1/2 Equipment Wiring Specifications, ATEX II 2G Safety-Critical Cable Design, and Next-Generation Hazardous-Area-Compliant Electrical Distribution for Class I Division 1/2, ATEX II 2G, and Classified Explosive Atmosphere Equipment Requiring Intrinsically Safe Multi-Core Control Cable with Proven Hazardous-Area-Grade PVC Chemistry, Extreme Temperature Stability (−40 to +80°C), DIN EN 60079-14 Intrinsic Safety Certification, IEC 60811-402 Water-Immersion Durability, CEI 20-34/2-1 Oil-Resistance, and Seamless Integration into Hazard-Compliant Electrical Distribution Architectures
6 Min Read
GAALFLEX® VFD FE4(O)CR: 600V/1000V European Standard Cost-Optimized Variable Frequency Drive Cable with XLPE Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Cost-Optimized Industrial VFD Cable European standard 600V/1000V cost-optimized VFD cable combining XLPE (cross-linked polyethylene) insulation with advanced protection architecture including PVC R2 inner sheath, simplified red copper braid-only shielding, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing cost-sensitive industrial frequency converter specification (600V/1000V), standard temperature industrial environments with extended cold tolerance (−20/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding with inner protection layer, extended motor spectrum (2.5–300 mm²), flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
Technical Department
on11/05/2026

GAALFLEX® VFD FE4(O)CR

GAALFLEX® VFD FE4(O)CR: 600V/1000V European Standard Cost-Optimized Variable Frequency Drive Cable with XLPE Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Cost-Optimized Industrial VFD Cable European standard 600V/1000V cost-optimized VFD cable combining XLPE (cross-linked polyethylene) insulation with advanced protection architecture including PVC R2 inner sheath, simplified red copper braid-only shielding, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing cost-sensitive industrial frequency converter specification (600V/1000V), standard temperature industrial environments with extended cold tolerance (−20/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding with inner protection layer, extended motor spectrum (2.5–300 mm²), flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
6 Min Read
GAALFLEX® VFD FG7(O)CR: 600V/1000V European Standard Industrial Halogen-Free Variable Frequency Drive Cable with HEPR Rubber Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Halogen-Free Industrial VFD Cable European standard 600V/1000V halogen-free VFD cable combining HEPR (halogen-free ethylene propylene rubber) insulation with simplified red copper braid-only shielding, PVC R2 inner sheath, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing halogen-free industrial frequency converter specification (non-building-code), standard temperature industrial environments (−15/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding topography, flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
Technical Department
on11/05/2026

Type FG7(O)CR GAALFLEX® VFD

GAALFLEX® VFD FG7(O)CR: 600V/1000V European Standard Industrial Halogen-Free Variable Frequency Drive Cable with HEPR Rubber Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Halogen-Free Industrial VFD Cable European standard 600V/1000V halogen-free VFD cable combining HEPR (halogen-free ethylene propylene rubber) insulation with simplified red copper braid-only shielding, PVC R2 inner sheath, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing halogen-free industrial frequency converter specification (non-building-code), standard temperature industrial environments (−15/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding topography, flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
1 Min Read
GAALFLEX® VFD 9YSLCYK-J: 600V/1000V European Standard Variable Frequency Drive Cable with PP Polypropylene Insulation, Low-Coupling EMC Shielding, Extreme Cold Arctic Performance (−50°C), UV-Resistant, Industrial Motor VFD Integration, 4-Core + 3+3 Earth Configurations, 1.5–240 mm², DIN VDE 0482/EN 50265/IEC 60332/UL VW-1/CSA FT-1 Fire-Rated, AWM Style 2570 1000V 80°C VW-1 Certification, Acid/Caustic/Oil Resistance, Environmental Compliance | International European Standard VFD Cable
Technical Department
on11/05/2026

GAALFLEX® VFD 9YSLCYK-J

GAALFLEX® VFD 9YSLCYK-J: 600V/1000V European Standard Variable Frequency Drive Cable with PP Polypropylene Insulation, Low-Coupling EMC Shielding, Extreme Cold Arctic Performance (−50°C), UV-Resistant, Industrial Motor VFD Integration, 4-Core + 3+3 Earth Configurations, 1.5–240 mm², DIN VDE 0482/EN 50265/IEC 60332/UL VW-1/CSA FT-1 Fire-Rated, AWM Style 2570 1000V 80°C VW-1 Certification, Acid/Caustic/Oil Resistance, Environmental Compliance | International European Standard VFD Cable
9 Min Read
GAALFLEX® Complete 53-Product Cable Selection Guide: Deep Comparison Across 7 Product Families for Industrial, Marine, Mining, Automation, and VFD Applications A comprehensive engineering reference comparing all 53 GAALFLEX® cable products across voltage rating, insulation technology, shielding architecture, temperature range, certification standards, application environment, and core configuration — enabling engineers to select the optimal cable for any industrial scenario from a single unified portfolio.
Technical Department
on09/05/2026

Deep Comparison Across 7 Cables Families for Industrial, Marine, Mining, Automation, and VFD Applications

GAALFLEX® Complete 53-Product Cable Selection Guide: Deep Comparison Across 7 Product Families for Industrial, Marine, Mining, Automation, and VFD Applications A comprehensive engineering reference comparing all 53 GAALFLEX® cable products across voltage rating, insulation technology, shielding architecture, temperature range, certification standards, application environment, and core configuration — enabling engineers to select the optimal cable for any industrial scenario from a single unified portfolio.
8 Min Read
GAALFLEX® TRAY VFD 1405 600V: Dual-Rated 600V/1000V Variable Frequency Drive Chain-Application Cable for Industrial VFD Systems, Chain-Reel Deployment, Direct-Burial Installations, and Hazardous-Area Applications (UL 1277 TC-ER 600V + UL 2277 WTTC 1000V Flexible Motor Supply Dual Voltage Rating, Comprehensive Multi-Configuration Portfolio [3+3 Earth, 3+1 Earth, 4G+Control Pair Combinations] Supporting Diverse VFD Power and Control Requirements, AWG Conductor Range [14 AWG to 350 MCM] Enabling Complete Industrial Motor Specification from Control Circuits Through Maximum Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295 / UL 83, Dual GAALTHERM® Insulation [GAALTHERM® 520 for 18–16 AWG, GAALTHERM® 591 for 14 AWG and Above] Providing Electrical Stability and Flame-Retardant Performance, Individual and Overall Aluminum Tape + PETP Foil + Tinned Copper Braid Shielding [85% Coverage ±5%] Providing Comprehensive EMI Suppression and Signal Integrity, Black RAL 9005 GAALTHERM® 520 Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor and Direct-Burial Installation, Chain-Application Optimization [20×D Minimum Bending Radius Flexible, >10×D Fixed, ≤5 M Chain Travel Length, ≤50 M/Min Chain Speed] Enabling Cable-Reel and Dynamic-Motion Industrial Equipment Integration, Temperature Range −40 to +105°C [Fixed Laying] or −5 to +105°C [Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Direct-Burial Certification per NFPA 79 2007 and NEC 336.10(7) Enabling Underground Trenching Without Additional Protection, Class 1 Div 2 Art. 336/392/501 Hazardous-Area Suitability, UL FT4/IEEE 1202 UL 1685 Flame-Retardant and Self-Extinguishing per Fire Testing, UV and Sunlight Resistance per EN 50396 / HD 605 A1 / UL 1581, Oil Resistance [OIL RES I] and Water Resistance Enabling Aggressive Industrial Environments, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Optional Direct-Burial, Optional c(UL) Type CIC/TC FT4 Upgrade, Optional AWM I/II A/B FT4 Upgrade, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Chain-Application and Direct-Burial VFD Cable Integration for Industrial Automation with Extreme-Temperature and Dynamic-Motion Capability)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1405 600 V

GAALFLEX® TRAY VFD 1405 600V: Dual-Rated 600V/1000V Variable Frequency Drive Chain-Application Cable for Industrial VFD Systems, Chain-Reel Deployment, Direct-Burial Installations, and Hazardous-Area Applications (UL 1277 TC-ER 600V + UL 2277 WTTC 1000V Flexible Motor Supply Dual Voltage Rating, Comprehensive Multi-Configuration Portfolio [3+3 Earth, 3+1 Earth, 4G+Control Pair Combinations] Supporting Diverse VFD Power and Control Requirements, AWG Conductor Range [14 AWG to 350 MCM] Enabling Complete Industrial Motor Specification from Control Circuits Through Maximum Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295 / UL 83, Dual GAALTHERM® Insulation [GAALTHERM® 520 for 18–16 AWG, GAALTHERM® 591 for 14 AWG and Above] Providing Electrical Stability and Flame-Retardant Performance, Individual and Overall Aluminum Tape + PETP Foil + Tinned Copper Braid Shielding [85% Coverage ±5%] Providing Comprehensive EMI Suppression and Signal Integrity, Black RAL 9005 GAALTHERM® 520 Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor and Direct-Burial Installation, Chain-Application Optimization [20×D Minimum Bending Radius Flexible, >10×D Fixed, ≤5 M Chain Travel Length, ≤50 M/Min Chain Speed] Enabling Cable-Reel and Dynamic-Motion Industrial Equipment Integration, Temperature Range −40 to +105°C [Fixed Laying] or −5 to +105°C [Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Direct-Burial Certification per NFPA 79 2007 and NEC 336.10(7) Enabling Underground Trenching Without Additional Protection, Class 1 Div 2 Art. 336/392/501 Hazardous-Area Suitability, UL FT4/IEEE 1202 UL 1685 Flame-Retardant and Self-Extinguishing per Fire Testing, UV and Sunlight Resistance per EN 50396 / HD 605 A1 / UL 1581, Oil Resistance [OIL RES I] and Water Resistance Enabling Aggressive Industrial Environments, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Optional Direct-Burial, Optional c(UL) Type CIC/TC FT4 Upgrade, Optional AWM I/II A/B FT4 Upgrade, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Chain-Application and Direct-Burial VFD Cable Integration for Industrial Automation with Extreme-Temperature and Dynamic-Motion Capability)
9 Min Read
GAALFLEX® TRAY VFD 1520: UL-Certified 1000V Tinned Copper Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Tinned Copper Conductor Sizing (IEC 60228 Class 5 Tinned Copper per DIN VDE 0295 Providing Enhanced Corrosion Resistance and Oxidation Protection), Frequency Converter Integration, Hazardous-Area Installations, and Aggressive Environmental Exposure (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Tinned Copper per IEC 60228 / DIN VDE 0295 Providing Superior Corrosion Resistance Versus Bare Copper in Salt-Spray, Chemical Vapor, and Moisture-Intensive Environments, GAALTHERM® 530 Special Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 CPE [Chloroprene Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Aggressive Outdoor Industrial Installation in Salt-Spray Coastal, Chemical Processing, and Humid Tropical Environments Without Additional Corrosion Protection, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance in Salt-Spray, Chemical, and Corrosion-Intensive Industrial Environments)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1520

GAALFLEX® TRAY VFD 1520: UL-Certified 1000V Tinned Copper Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Tinned Copper Conductor Sizing (IEC 60228 Class 5 Tinned Copper per DIN VDE 0295 Providing Enhanced Corrosion Resistance and Oxidation Protection), Frequency Converter Integration, Hazardous-Area Installations, and Aggressive Environmental Exposure (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Tinned Copper per IEC 60228 / DIN VDE 0295 Providing Superior Corrosion Resistance Versus Bare Copper in Salt-Spray, Chemical Vapor, and Moisture-Intensive Environments, GAALTHERM® 530 Special Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 CPE [Chloroprene Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Aggressive Outdoor Industrial Installation in Salt-Spray Coastal, Chemical Processing, and Humid Tropical Environments Without Additional Corrosion Protection, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance in Salt-Spray, Chemical, and Corrosion-Intensive Industrial Environments)
9 Min Read
GAALFLEX® VFD 1100 PH: Heavy-Duty Variable Frequency Drive Inverter Connection Cable for Extreme-Temperature Industrial Environments, Harsh-Climate Mining Operations, and Demanding Mechanical-Stress Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete Heavy-Duty VFD Specification, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 630 Special Polyurethane Insulation Providing Superior Mechanical Robustness, Chemical Resistance, and Thermal Stability with −50°C Fixed Laying / −40°C Flexible Installation Minimum, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black PUR [Polyurethane] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Harsh-Environment Installation Without Additional Protection, Temperature Range −50 to +90°C [Fixed Laying] or −40 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Mining Application Suitability, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Halogen-Free Zero-Halogen Construction per DIN VDE 0482 part 267, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Optional Advanced Flame-Retardant Upgrade per DIN VDE 0482 part 265-5-2 / EN 50266-5-2 / IEC 60332-3-24 [Identified with '5' Marker on Part Number 5th Position], RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Heavy-Duty Motor Drive Integration and Process Automation Acceptance in Extreme-Condition Environments)
Technical Department
on09/05/2026

GAALFLEX® VFD 1100 PH

GAALFLEX® VFD 1100 PH: Heavy-Duty Variable Frequency Drive Inverter Connection Cable for Extreme-Temperature Industrial Environments, Harsh-Climate Mining Operations, and Demanding Mechanical-Stress Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete Heavy-Duty VFD Specification, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 630 Special Polyurethane Insulation Providing Superior Mechanical Robustness, Chemical Resistance, and Thermal Stability with −50°C Fixed Laying / −40°C Flexible Installation Minimum, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black PUR [Polyurethane] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Harsh-Environment Installation Without Additional Protection, Temperature Range −50 to +90°C [Fixed Laying] or −40 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Mining Application Suitability, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Halogen-Free Zero-Halogen Construction per DIN VDE 0482 part 267, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Optional Advanced Flame-Retardant Upgrade per DIN VDE 0482 part 265-5-2 / EN 50266-5-2 / IEC 60332-3-24 [Identified with ‘5’ Marker on Part Number 5th Position], RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Heavy-Duty Motor Drive Integration and Process Automation Acceptance in Extreme-Condition Environments)
9 Min Read
GAALFLEX® VFD 2XSLCHK-J: CPR-Compliant Oil-Resistant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building and Industrial Applications with Oil-Exposure Environments, Higher-Temperature Industrial Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Dca-S1b,d2,a1 Fire Classification [Enhanced Performance: Low Smoke, Zero Halogen, Minimal Toxicity, Limited Corrosive Gases], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions Plus New 7-Core Option], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Halogen-Free Insulation with Oil Resistance per IEC 60811-404, Low Corrosive Gas Emission per IEC 60754-2, Low Smoke Density per IEC 61034-1-2, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black Halogen-Free PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +90°C [Fixed Laying] or −15 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling High-Temperature Industrial Facilities, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 part 266-4-2 / EN 50266-4-2 / IEC 60332-3-24, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Oil-Resistant Construction Eliminating Cable Degradation in Petrochemical/Automotive/Food Processing Environments, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration in High-Temperature Oil-Exposure Environments)
Technical Department
on08/05/2026

GAALFLEX® VFD 2XSLCHK-J

GAALFLEX® VFD 2XSLCHK-J: CPR-Compliant Oil-Resistant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building and Industrial Applications with Oil-Exposure Environments, Higher-Temperature Industrial Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Dca-S1b,d2,a1 Fire Classification [Enhanced Performance: Low Smoke, Zero Halogen, Minimal Toxicity, Limited Corrosive Gases], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions Plus New 7-Core Option], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Halogen-Free Insulation with Oil Resistance per IEC 60811-404, Low Corrosive Gas Emission per IEC 60754-2, Low Smoke Density per IEC 61034-1-2, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black Halogen-Free PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +90°C [Fixed Laying] or −15 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling High-Temperature Industrial Facilities, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 part 266-4-2 / EN 50266-4-2 / IEC 60332-3-24, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Oil-Resistant Construction Eliminating Cable Degradation in Petrochemical/Automotive/Food Processing Environments, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration in High-Temperature Oil-Exposure Environments)
9 Min Read
GAALFLEX® VFD 2XSLCYK: CPR-Compliant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building Applications, Industrial Frequency Converter Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Cca-s3,d1,a3 Fire Classification [Low Smoke, Zero Halogen, Minimal Toxicity], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Halogen-Free Performance, Low Corrosive Gas Emission, and Superior Thermal Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black RAL 9005 PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +70°C [Fixed Laying] or −15 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / EN 50399, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, Suitable for Buildings, Plants, Fixed Installations, Medium Mechanical Stress, Forced-Movement Flexible Installations in Dry/Moist/Wet Environments, Automotive and Food Industry Applications, SIMOVERT Frequency Converter Integration, Industrial Pump/Ventilator/Conveyor/Air-Conditioning Systems, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration)
Technical Department
on08/05/2026

GAALFLEX® VFD 2XSLCYK

GAALFLEX® VFD 2XSLCYK: CPR-Compliant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building Applications, Industrial Frequency Converter Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Cca-s3,d1,a3 Fire Classification [Low Smoke, Zero Halogen, Minimal Toxicity], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Halogen-Free Performance, Low Corrosive Gas Emission, and Superior Thermal Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black RAL 9005 PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +70°C [Fixed Laying] or −15 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / EN 50399, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, Suitable for Buildings, Plants, Fixed Installations, Medium Mechanical Stress, Forced-Movement Flexible Installations in Dry/Moist/Wet Environments, Automotive and Food Industry Applications, SIMOVERT Frequency Converter Integration, Industrial Pump/Ventilator/Conveyor/Air-Conditioning Systems, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration)
9 Min Read
GAALFLEX® VFD 1300 A: BS 5467-Compliant Armoured Variable Frequency Drive Inverter Connection Cable for Harsh Industrial Environments, Outdoor Deployment, and Applications Requiring Mechanical Protection (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification in Mechanical Hazard Zones, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 580 Special Polyurethane Insulation Providing Superior Thermal Stability and Mechanical Robustness Compared to PE Standard Insulation, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression for Frequency Converter Signal Integrity, Steel Wire Armour Providing Comprehensive Mechanical Protection Against Puncture, Crushing, and Environmental Hazards Enabling Direct Burial and Outdoor Installation, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Inner Black RAL 9005 PVC Sheath Protecting Armour from Conductor Contact, Outer Black UV-Resistant PVC Compound Sheath Enabling Outdoor Industrial Installation Without Additional Protection, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, 12×D Minimum Bending Radius Supporting Field Routing in Armoured Configurations, BS 5467 Compliance Enabling UK and Commonwealth Market Acceptance, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Integration and Process Automation Acceptance in Mechanically Hazardous Environments)
Technical Department
on08/05/2026

BS 5467 GAALFLEX® VFD 1300 A

GAALFLEX® VFD 1300 A: BS 5467-Compliant Armoured Variable Frequency Drive Inverter Connection Cable for Harsh Industrial Environments, Outdoor Deployment, and Applications Requiring Mechanical Protection (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification in Mechanical Hazard Zones, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 580 Special Polyurethane Insulation Providing Superior Thermal Stability and Mechanical Robustness Compared to PE Standard Insulation, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression for Frequency Converter Signal Integrity, Steel Wire Armour Providing Comprehensive Mechanical Protection Against Puncture, Crushing, and Environmental Hazards Enabling Direct Burial and Outdoor Installation, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Inner Black RAL 9005 PVC Sheath Protecting Armour from Conductor Contact, Outer Black UV-Resistant PVC Compound Sheath Enabling Outdoor Industrial Installation Without Additional Protection, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, 12×D Minimum Bending Radius Supporting Field Routing in Armoured Configurations, BS 5467 Compliance Enabling UK and Commonwealth Market Acceptance, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Integration and Process Automation Acceptance in Mechanically Hazardous Environments)
9 Min Read
GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
Technical Department
on08/05/2026

GAALFLEX® VFD 1000 (2YSLCYK-J UL)

GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
9 Min Read
GAALFLEX® VFD 2YSLCYK-J: CPR-Compliant (EU 305/2011 + EN 50575:2014+A1:2016, Eca Classification) Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Mining Applications, and Outdoor Frequency Converter Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification from Servo Drives Through Industrial Motors, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor Mining and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Hazardous-Area Installation per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, CPR Fire Classification Eca [EN 13501-1] Enabling European Regulatory Compliance, Optional XLPE Halogen-Free Version [2XSLCHK-J] per IEC 60502-4 with Eca-Rated Black SHF1 Sheath, Suitable for Mining Machinery, Outdoor Industrial Systems, Automotive and Food Automation with Environmental Exposure, and Complete International VFD Infrastructure Compliance with Regulatory Mandates)
Technical Department
on08/05/2026

Type 2YSLCYK-J GAALFLEX® VFD

GAALFLEX® VFD 2YSLCYK-J: CPR-Compliant (EU 305/2011 + EN 50575:2014+A1:2016, Eca Classification) Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Mining Applications, and Outdoor Frequency Converter Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification from Servo Drives Through Industrial Motors, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor Mining and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Hazardous-Area Installation per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, CPR Fire Classification Eca [EN 13501-1] Enabling European Regulatory Compliance, Optional XLPE Halogen-Free Version [2XSLCHK-J] per IEC 60502-4 with Eca-Rated Black SHF1 Sheath, Suitable for Mining Machinery, Outdoor Industrial Systems, Automotive and Food Automation with Environmental Exposure, and Complete International VFD Infrastructure Compliance with Regulatory Mandates)
9 Min Read
GAALFLEX® VFD 2YSLCY-J: Shielded Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply and Frequency Converter Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD System Specification from Small Servo Drives Through High-Power Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 Enabling Field Installation and Drive Enclosure Routing, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Transparent or Transparent-Orange PVC Outer Sheath Enabling Visual Conductor Inspection and Installation Verification, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, Hazardous-Area Installation Capability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3 Enabling Integration with Modern Frequency Converter Installations, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, Optional XLPE Halogen-Free Version [2XSLCH-J] for Environmental Applications, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance)
Technical Department
on08/05/2026

Type 2YSLCY-J GAALFLEX® VFD

GAALFLEX® VFD 2YSLCY-J: Shielded Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply and Frequency Converter Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD System Specification from Small Servo Drives Through High-Power Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 Enabling Field Installation and Drive Enclosure Routing, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Transparent or Transparent-Orange PVC Outer Sheath Enabling Visual Conductor Inspection and Installation Verification, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, Hazardous-Area Installation Capability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3 Enabling Integration with Modern Frequency Converter Installations, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, Optional XLPE Halogen-Free Version [2XSLCH-J] for Environmental Applications, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance)