[email protected]

black RAL 9005

3 Min Read
EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
Technical Department
on15/05/2026

FLEXIFESTOON® (N)GRDGCGÖU-J

EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn’t interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
8 Min Read
(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: - High bending flexibility (4×D minimum typical) - Fast rewind capability (240+ m/min rated speed) - Sustained torsion tolerance (±25°/1m continuous) - Extended temperature range (−50 to +80°C) - UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
Technical Department
on15/05/2026

(N)GRDGÖU-J Festoon Cable

(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: – High bending flexibility (4×D minimum typical) – Fast rewind capability (240+ m/min rated speed) – Sustained torsion tolerance (±25°/1m continuous) – Extended temperature range (−50 to +80°C) – UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
3 Min Read
H07BN4-F HAR Nomenclature Breakdown (per CEI 20-20/20-19): H = Harmonized standard designation (IEC 60227 compliance) Indicates cable meets international safety standards Full compatibility with European electrical regulations 07 = Voltage designation (Uo/U = 450/750V) 07 = 450/750V nominal voltage class (other classes: 03 = 300/500V, 04 = 400/690V) Testing: 3 kV test voltage (10 times nominal) B = Special feature (Flexible/Benign environment) B typically indicates bare or flexible conductor design (Standard = no letter designation) N = Rubber type designation N = Normally-proportioned sheath thickness (S = Slim/reduced, T = Thick/reinforced) For H07BN4-F: N = Standard thickness for 450/750V industrial use Insulation thickness: 1.2 mm per DIN VDE 0282 Sheath thickness: 1.0–1.5 mm per DIN VDE 0293 4 = Number of principal tests/features Typically indicates: (1) Temperature range, (2) Insulation type, (3) Sheath composition, (4) Mechanical properties certification F = Flexibility designation F = Fully flexible (can be wound on reels) (Other: S = Service-cord, C = Cable) H07BN4-F can be: Coiled on reel: Yes (reelable) Bent radius: Down to 4×D (normal use) to 2×D (close to terminal) Repeated winding: Yes (drum rating available) Continuous flexing: Yes (up to 50+ million cycles per EN 50266) HAR = Harmonics-compatible technology designation HAR = High-frequency harmonic and transient rated Specifically designed for: - VFD (variable frequency drive) motor circuits (up to 20 kHz switching) - Welding equipment (high current transients, multi-frequency content) - Industrial power electronics environments (distorted waveforms) HAR testing per EN 50334: Transient overvoltage withstand: 3× nominal voltage, sustained Harmonic content up to 50th harmonic: Fully rated Dv/dt immunity: >3 kV/µs (fast switching events) Comparison: Standard vs. HAR designation Standard H07BN4-F (without HAR): Frequency: Single 50/60 Hz only Total harmonic distortion (THD) limit: 20% acceptable (VFD typical) Transient immunity: Enhanced (3+ kV nominal test) Suitable for: VFD motors, welding, power electronics Cost: +8–12% premium over standard Application advantage: Single cable type serves both conventional and VFD circuits
Technical Department
on15/05/2026

FLEXIFESTOON® H07BN4-F

H07BN4-F HAR Nomenclature Breakdown (per CEI 20-20/20-19): H = Harmonized standard designation (IEC 60227 compliance) Indicates cable meets international safety standards Full compatibility with European electrical regulations 07 = Voltage designation (Uo/U = 450/750V) 07 = 450/750V nominal voltage class (other classes: 03 = 300/500V, 04 = 400/690V) Testing: 3 kV test voltage (10 times nominal) B = Special feature (Flexible/Benign environment) B typically indicates bare or flexible conductor design (Standard = no letter designation) N = Rubber type designation N = Normally-proportioned sheath thickness (S = Slim/reduced, T = Thick/reinforced) For H07BN4-F: N = Standard thickness for 450/750V industrial use Insulation thickness: 1.2 mm per DIN VDE 0282 Sheath thickness: 1.0–1.5 mm per DIN VDE 0293 4 = Number of principal tests/features Typically indicates: (1) Temperature range, (2) Insulation type, (3) Sheath composition, (4) Mechanical properties certification F = Flexibility designation F = Fully flexible (can be wound on reels) (Other: S = Service-cord, C = Cable) H07BN4-F can be: Coiled on reel: Yes (reelable) Bent radius: Down to 4×D (normal use) to 2×D (close to terminal) Repeated winding: Yes (drum rating available) Continuous flexing: Yes (up to 50+ million cycles per EN 50266) HAR = Harmonics-compatible technology designation HAR = High-frequency harmonic and transient rated Specifically designed for: – VFD (variable frequency drive) motor circuits (up to 20 kHz switching) – Welding equipment (high current transients, multi-frequency content) – Industrial power electronics environments (distorted waveforms) HAR testing per EN 50334: Transient overvoltage withstand: 3× nominal voltage, sustained Harmonic content up to 50th harmonic: Fully rated Dv/dt immunity: >3 kV/µs (fast switching events) Comparison: Standard vs. HAR designation Standard H07BN4-F (without HAR): Frequency: Single 50/60 Hz only Total harmonic distortion (THD) limit: 20% acceptable (VFD typical) Transient immunity: Enhanced (3+ kV nominal test) Suitable for: VFD motors, welding, power electronics Cost: +8–12% premium over standard Application advantage: Single cable type serves both conventional and VFD circuits
6 Min Read
GAALFLEX® VFD FG7(O)CR: 600V/1000V European Standard Industrial Halogen-Free Variable Frequency Drive Cable with HEPR Rubber Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Halogen-Free Industrial VFD Cable European standard 600V/1000V halogen-free VFD cable combining HEPR (halogen-free ethylene propylene rubber) insulation with simplified red copper braid-only shielding, PVC R2 inner sheath, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing halogen-free industrial frequency converter specification (non-building-code), standard temperature industrial environments (−15/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding topography, flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
Technical Department
on11/05/2026

Type FG7(O)CR GAALFLEX® VFD

GAALFLEX® VFD FG7(O)CR: 600V/1000V European Standard Industrial Halogen-Free Variable Frequency Drive Cable with HEPR Rubber Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Halogen-Free Industrial VFD Cable European standard 600V/1000V halogen-free VFD cable combining HEPR (halogen-free ethylene propylene rubber) insulation with simplified red copper braid-only shielding, PVC R2 inner sheath, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing halogen-free industrial frequency converter specification (non-building-code), standard temperature industrial environments (−15/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding topography, flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
1 Min Read
GAALFLEX® VFD 9YSLCYK-J: 600V/1000V European Standard Variable Frequency Drive Cable with PP Polypropylene Insulation, Low-Coupling EMC Shielding, Extreme Cold Arctic Performance (−50°C), UV-Resistant, Industrial Motor VFD Integration, 4-Core + 3+3 Earth Configurations, 1.5–240 mm², DIN VDE 0482/EN 50265/IEC 60332/UL VW-1/CSA FT-1 Fire-Rated, AWM Style 2570 1000V 80°C VW-1 Certification, Acid/Caustic/Oil Resistance, Environmental Compliance | International European Standard VFD Cable
Technical Department
on11/05/2026

GAALFLEX® VFD 9YSLCYK-J

GAALFLEX® VFD 9YSLCYK-J: 600V/1000V European Standard Variable Frequency Drive Cable with PP Polypropylene Insulation, Low-Coupling EMC Shielding, Extreme Cold Arctic Performance (−50°C), UV-Resistant, Industrial Motor VFD Integration, 4-Core + 3+3 Earth Configurations, 1.5–240 mm², DIN VDE 0482/EN 50265/IEC 60332/UL VW-1/CSA FT-1 Fire-Rated, AWM Style 2570 1000V 80°C VW-1 Certification, Acid/Caustic/Oil Resistance, Environmental Compliance | International European Standard VFD Cable
8 Min Read
GAALFLEX® TRAY VFD 1420 2000V: Multi-Certified Dual 1000V/2000V Variable Frequency Drive Cable for Flexible North American and International Industrial High-Voltage VFD Systems with Maximum Certification and Voltage Platform Flexibility (Dual 1000V [WTTC 90°C Dry] / 2000V [UL 1277 TC-ER 90°C Dry/Wet] Voltage Rating with Optional 600V UL TC-ER Upgrade, Comprehensive 3+3 Earth Conductor Configuration [3 Power + 3 Ground] Supporting High-Voltage Industrial Motor Power Distribution, AWG Conductor Range [14 AWG to 500 MCM] Enabling Complete High-Voltage Motor Specification from Control Circuits Through Maximum Industrial Motor Systems, Finely Stranded Red Copper per ASTM B-3 and B-174, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Electrical Stability and Flame-Retardant Performance Under Multi-Voltage Stress, Uninsulated Finely Stranded Red Copper Earth Conductors per ASTM B-3 or B-174, Red Copper Tape Shielding Providing Comprehensive EMI Suppression and Grounding Continuity, Black RAL 9005 Standard PVC Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Industrial High-Voltage Facilities, 12×D Minimum Bending Radius Supporting Robust Installation, Comprehensive Flame Testing per UL 1581, UL 2556 VW-1, CSA FT4, UL 1685 Vertical Flame, IEEE 383, IEEE 1202 Vertical Tray Flame, ICEA T-29-520 Ensuring Fire Safety Across North American and International Standards, Optional Oil Resistance Grade I per UL 1277 60°C, Optional Special EPR Compound Insulation Upgrade Available, Optional Tinned Copper Upgrade Available, EPA 40 CFR Part 261 Environmental Compliance, Optional OSHA and MSHA Approval Available for Hazardous-Area Mining Applications, RoHS Approved, c(UL) Type CIC/TC FT4 Certification Enabling North American Hazardous-Area and Instrumentation Compliance, Optional RHH or RHW-2 Conductor Upgrade per UL 44 and ICEA S-95-658 / NEMA WC 70 Enabling Premium North American Conductor Specification, CSA C22.2 No. 230 Tray Cable and CSA C22.2 No. 239 Control and Instrumentation Cable Optional Certification, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, and Complete North American Flexible Multi-Certified High-Voltage VFD Infrastructure Compliance Enabling OEM High-Voltage Motor Drive Integration with Maximum Certification Flexibility and Voltage Platform Choice)
Technical Department
on11/05/2026

GAALFLEX® TRAY VFD 1420

GAALFLEX® TRAY VFD 1420 2000V: Multi-Certified Dual 1000V/2000V Variable Frequency Drive Cable for Flexible North American and International Industrial High-Voltage VFD Systems with Maximum Certification and Voltage Platform Flexibility (Dual 1000V [WTTC 90°C Dry] / 2000V [UL 1277 TC-ER 90°C Dry/Wet] Voltage Rating with Optional 600V UL TC-ER Upgrade, Comprehensive 3+3 Earth Conductor Configuration [3 Power + 3 Ground] Supporting High-Voltage Industrial Motor Power Distribution, AWG Conductor Range [14 AWG to 500 MCM] Enabling Complete High-Voltage Motor Specification from Control Circuits Through Maximum Industrial Motor Systems, Finely Stranded Red Copper per ASTM B-3 and B-174, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Electrical Stability and Flame-Retardant Performance Under Multi-Voltage Stress, Uninsulated Finely Stranded Red Copper Earth Conductors per ASTM B-3 or B-174, Red Copper Tape Shielding Providing Comprehensive EMI Suppression and Grounding Continuity, Black RAL 9005 Standard PVC Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Industrial High-Voltage Facilities, 12×D Minimum Bending Radius Supporting Robust Installation, Comprehensive Flame Testing per UL 1581, UL 2556 VW-1, CSA FT4, UL 1685 Vertical Flame, IEEE 383, IEEE 1202 Vertical Tray Flame, ICEA T-29-520 Ensuring Fire Safety Across North American and International Standards, Optional Oil Resistance Grade I per UL 1277 60°C, Optional Special EPR Compound Insulation Upgrade Available, Optional Tinned Copper Upgrade Available, EPA 40 CFR Part 261 Environmental Compliance, Optional OSHA and MSHA Approval Available for Hazardous-Area Mining Applications, RoHS Approved, c(UL) Type CIC/TC FT4 Certification Enabling North American Hazardous-Area and Instrumentation Compliance, Optional RHH or RHW-2 Conductor Upgrade per UL 44 and ICEA S-95-658 / NEMA WC 70 Enabling Premium North American Conductor Specification, CSA C22.2 No. 230 Tray Cable and CSA C22.2 No. 239 Control and Instrumentation Cable Optional Certification, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, and Complete North American Flexible Multi-Certified High-Voltage VFD Infrastructure Compliance Enabling OEM High-Voltage Motor Drive Integration with Maximum Certification Flexibility and Voltage Platform Choice)
7 Min Read
GAALFLEX® TRAY VFD 1410 2000V: 2000V Industrial High-Voltage Variable Frequency Drive Cable for North American and International Industrial High-Voltage VFD Systems, Motor Drive Applications, Frequency Converter Integration, and Hazardous-Area Installations (2000V Nominal Voltage [UL 1277 Type TC-ER], Comprehensive 3+3 Earth Conductor Configuration [3 Power + 3 Ground] Supporting High-Voltage Industrial Motor Power Distribution, AWG Conductor Range [14 AWG to 500 MCM] Enabling Complete High-Voltage Motor Specification from Control Circuits Through Maximum Industrial Motor Systems, Stranded Red Copper per ASTM B-3 and B-8, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Electrical Stability and Flame-Retardant Performance Under High-Voltage Stress, Uninsulated Stranded Red Copper Earth Conductors per ASTM B-3 and B-8, Red Copper Tape Shielding Providing Comprehensive EMI Suppression and Grounding Continuity, Black RAL 9005 Standard PVC Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Industrial High-Voltage Facilities, 12×D Minimum Bending Radius Supporting Robust Installation, Comprehensive Flame Testing per UL 1581, UL 2556 VW-1, CSA FT4, UL 1685 Vertical Flame, IEEE 383, IEEE 1202 Vertical Tray Flame, ICEA T-29-520 Ensuring Fire Safety Across North American and International Standards, Optional EPR [Ethylene Propylene Rubber] Compound Insulation Upgrade Available, Optional 4-Conductor Version Available, Optional RHH or RHW-2 Conductor Upgrade per UL 44 and ICEA S-95-658 / NEMA WC 70 Enabling Premium North American Conductor Specification, Optional Oil Resistance Grade I per UL 1277 60°C, EPA 40 CFR Part 261 Environmental Compliance, OSHA and MSHA Approval Available for Hazardous-Area Mining Applications, RoHS Approved, Optional c(UL) Type CIC/TC FT4 Certification, Optional CSA C22.2 No. 230 Tray Cable and CSA C22.2 No. 239 Instrumentation Cable Certification, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, and Complete North American High-Voltage VFD Infrastructure Compliance Enabling OEM High-Voltage Motor Drive Integration and Process Automation Acceptance)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1410 2000 V

GAALFLEX® TRAY VFD 1410 2000V: 2000V Industrial High-Voltage Variable Frequency Drive Cable for North American and International Industrial High-Voltage VFD Systems, Motor Drive Applications, Frequency Converter Integration, and Hazardous-Area Installations (2000V Nominal Voltage [UL 1277 Type TC-ER], Comprehensive 3+3 Earth Conductor Configuration [3 Power + 3 Ground] Supporting High-Voltage Industrial Motor Power Distribution, AWG Conductor Range [14 AWG to 500 MCM] Enabling Complete High-Voltage Motor Specification from Control Circuits Through Maximum Industrial Motor Systems, Stranded Red Copper per ASTM B-3 and B-8, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Electrical Stability and Flame-Retardant Performance Under High-Voltage Stress, Uninsulated Stranded Red Copper Earth Conductors per ASTM B-3 and B-8, Red Copper Tape Shielding Providing Comprehensive EMI Suppression and Grounding Continuity, Black RAL 9005 Standard PVC Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Industrial High-Voltage Facilities, 12×D Minimum Bending Radius Supporting Robust Installation, Comprehensive Flame Testing per UL 1581, UL 2556 VW-1, CSA FT4, UL 1685 Vertical Flame, IEEE 383, IEEE 1202 Vertical Tray Flame, ICEA T-29-520 Ensuring Fire Safety Across North American and International Standards, Optional EPR [Ethylene Propylene Rubber] Compound Insulation Upgrade Available, Optional 4-Conductor Version Available, Optional RHH or RHW-2 Conductor Upgrade per UL 44 and ICEA S-95-658 / NEMA WC 70 Enabling Premium North American Conductor Specification, Optional Oil Resistance Grade I per UL 1277 60°C, EPA 40 CFR Part 261 Environmental Compliance, OSHA and MSHA Approval Available for Hazardous-Area Mining Applications, RoHS Approved, Optional c(UL) Type CIC/TC FT4 Certification, Optional CSA C22.2 No. 230 Tray Cable and CSA C22.2 No. 239 Instrumentation Cable Certification, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, and Complete North American High-Voltage VFD Infrastructure Compliance Enabling OEM High-Voltage Motor Drive Integration and Process Automation Acceptance)
8 Min Read
GAALFLEX® TRAY VFD 1405 600V: Dual-Rated 600V/1000V Variable Frequency Drive Chain-Application Cable for Industrial VFD Systems, Chain-Reel Deployment, Direct-Burial Installations, and Hazardous-Area Applications (UL 1277 TC-ER 600V + UL 2277 WTTC 1000V Flexible Motor Supply Dual Voltage Rating, Comprehensive Multi-Configuration Portfolio [3+3 Earth, 3+1 Earth, 4G+Control Pair Combinations] Supporting Diverse VFD Power and Control Requirements, AWG Conductor Range [14 AWG to 350 MCM] Enabling Complete Industrial Motor Specification from Control Circuits Through Maximum Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295 / UL 83, Dual GAALTHERM® Insulation [GAALTHERM® 520 for 18–16 AWG, GAALTHERM® 591 for 14 AWG and Above] Providing Electrical Stability and Flame-Retardant Performance, Individual and Overall Aluminum Tape + PETP Foil + Tinned Copper Braid Shielding [85% Coverage ±5%] Providing Comprehensive EMI Suppression and Signal Integrity, Black RAL 9005 GAALTHERM® 520 Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor and Direct-Burial Installation, Chain-Application Optimization [20×D Minimum Bending Radius Flexible, >10×D Fixed, ≤5 M Chain Travel Length, ≤50 M/Min Chain Speed] Enabling Cable-Reel and Dynamic-Motion Industrial Equipment Integration, Temperature Range −40 to +105°C [Fixed Laying] or −5 to +105°C [Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Direct-Burial Certification per NFPA 79 2007 and NEC 336.10(7) Enabling Underground Trenching Without Additional Protection, Class 1 Div 2 Art. 336/392/501 Hazardous-Area Suitability, UL FT4/IEEE 1202 UL 1685 Flame-Retardant and Self-Extinguishing per Fire Testing, UV and Sunlight Resistance per EN 50396 / HD 605 A1 / UL 1581, Oil Resistance [OIL RES I] and Water Resistance Enabling Aggressive Industrial Environments, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Optional Direct-Burial, Optional c(UL) Type CIC/TC FT4 Upgrade, Optional AWM I/II A/B FT4 Upgrade, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Chain-Application and Direct-Burial VFD Cable Integration for Industrial Automation with Extreme-Temperature and Dynamic-Motion Capability)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1405 600 V

GAALFLEX® TRAY VFD 1405 600V: Dual-Rated 600V/1000V Variable Frequency Drive Chain-Application Cable for Industrial VFD Systems, Chain-Reel Deployment, Direct-Burial Installations, and Hazardous-Area Applications (UL 1277 TC-ER 600V + UL 2277 WTTC 1000V Flexible Motor Supply Dual Voltage Rating, Comprehensive Multi-Configuration Portfolio [3+3 Earth, 3+1 Earth, 4G+Control Pair Combinations] Supporting Diverse VFD Power and Control Requirements, AWG Conductor Range [14 AWG to 350 MCM] Enabling Complete Industrial Motor Specification from Control Circuits Through Maximum Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295 / UL 83, Dual GAALTHERM® Insulation [GAALTHERM® 520 for 18–16 AWG, GAALTHERM® 591 for 14 AWG and Above] Providing Electrical Stability and Flame-Retardant Performance, Individual and Overall Aluminum Tape + PETP Foil + Tinned Copper Braid Shielding [85% Coverage ±5%] Providing Comprehensive EMI Suppression and Signal Integrity, Black RAL 9005 GAALTHERM® 520 Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor and Direct-Burial Installation, Chain-Application Optimization [20×D Minimum Bending Radius Flexible, >10×D Fixed, ≤5 M Chain Travel Length, ≤50 M/Min Chain Speed] Enabling Cable-Reel and Dynamic-Motion Industrial Equipment Integration, Temperature Range −40 to +105°C [Fixed Laying] or −5 to +105°C [Flexible Installation] with 90°C Dry and 90°C Wet UL Rating Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Direct-Burial Certification per NFPA 79 2007 and NEC 336.10(7) Enabling Underground Trenching Without Additional Protection, Class 1 Div 2 Art. 336/392/501 Hazardous-Area Suitability, UL FT4/IEEE 1202 UL 1685 Flame-Retardant and Self-Extinguishing per Fire Testing, UV and Sunlight Resistance per EN 50396 / HD 605 A1 / UL 1581, Oil Resistance [OIL RES I] and Water Resistance Enabling Aggressive Industrial Environments, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Optional Direct-Burial, Optional c(UL) Type CIC/TC FT4 Upgrade, Optional AWM I/II A/B FT4 Upgrade, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Chain-Application and Direct-Burial VFD Cable Integration for Industrial Automation with Extreme-Temperature and Dynamic-Motion Capability)
8 Min Read
GAALFLEX® TRAY VFD 1400: UL-Certified 1000V Standard Industrial Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, Hazardous-Area Installations, and Cost-Sensitive Industrial Applications (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 Standard PVC [Polyvinyl Chloride] Halogen-Free Outer Sheath with UV Resistance Enabling Industrial Outdoor Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, Optional Tinned Copper Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling Cost-Effective OEM Tray Cable Integration and Process Automation Acceptance for Standard Industrial Environments)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1400

GAALFLEX® TRAY VFD 1400: UL-Certified 1000V Standard Industrial Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, Hazardous-Area Installations, and Cost-Sensitive Industrial Applications (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 Standard PVC [Polyvinyl Chloride] Halogen-Free Outer Sheath with UV Resistance Enabling Industrial Outdoor Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, Optional Tinned Copper Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling Cost-Effective OEM Tray Cable Integration and Process Automation Acceptance for Standard Industrial Environments)
9 Min Read
GAALFLEX® TRAY VFD 1520: UL-Certified 1000V Tinned Copper Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Tinned Copper Conductor Sizing (IEC 60228 Class 5 Tinned Copper per DIN VDE 0295 Providing Enhanced Corrosion Resistance and Oxidation Protection), Frequency Converter Integration, Hazardous-Area Installations, and Aggressive Environmental Exposure (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Tinned Copper per IEC 60228 / DIN VDE 0295 Providing Superior Corrosion Resistance Versus Bare Copper in Salt-Spray, Chemical Vapor, and Moisture-Intensive Environments, GAALTHERM® 530 Special Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 CPE [Chloroprene Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Aggressive Outdoor Industrial Installation in Salt-Spray Coastal, Chemical Processing, and Humid Tropical Environments Without Additional Corrosion Protection, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance in Salt-Spray, Chemical, and Corrosion-Intensive Industrial Environments)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1520

GAALFLEX® TRAY VFD 1520: UL-Certified 1000V Tinned Copper Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Tinned Copper Conductor Sizing (IEC 60228 Class 5 Tinned Copper per DIN VDE 0295 Providing Enhanced Corrosion Resistance and Oxidation Protection), Frequency Converter Integration, Hazardous-Area Installations, and Aggressive Environmental Exposure (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Tinned Copper per IEC 60228 / DIN VDE 0295 Providing Superior Corrosion Resistance Versus Bare Copper in Salt-Spray, Chemical Vapor, and Moisture-Intensive Environments, GAALTHERM® 530 Special Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 CPE [Chloroprene Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Aggressive Outdoor Industrial Installation in Salt-Spray Coastal, Chemical Processing, and Humid Tropical Environments Without Additional Corrosion Protection, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance in Salt-Spray, Chemical, and Corrosion-Intensive Industrial Environments)
8 Min Read
GAALFLEX® TRAY VFD 1510 T: UL-Certified 1000V Metric Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance with Metric Conductor Sizing)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1510 T

GAALFLEX® TRAY VFD 1510 T: UL-Certified 1000V Metric Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance with Metric Conductor Sizing)
8 Min Read
GAALFLEX® TRAY VFD 1500 T: UL-Certified 1000V Cable Tray Variable Frequency Drive Inverter Connection Cable for North American Industrial Cable Tray Systems, Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 16–500 MCM Conductor Range Enabling Complete North American Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Finely Stranded Red Copper per ASTM B-3, B-33, B-172, B-174, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling Tray Installation per NEC [National Electrical Code], Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete North American VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1500 T

GAALFLEX® TRAY VFD 1500 T: UL-Certified 1000V Cable Tray Variable Frequency Drive Inverter Connection Cable for North American Industrial Cable Tray Systems, Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 16–500 MCM Conductor Range Enabling Complete North American Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Finely Stranded Red Copper per ASTM B-3, B-33, B-172, B-174, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling Tray Installation per NEC [National Electrical Code], Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete North American VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance)
9 Min Read
GAALFLEX® VFD 2XSLCYK: CPR-Compliant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building Applications, Industrial Frequency Converter Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Cca-s3,d1,a3 Fire Classification [Low Smoke, Zero Halogen, Minimal Toxicity], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Halogen-Free Performance, Low Corrosive Gas Emission, and Superior Thermal Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black RAL 9005 PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +70°C [Fixed Laying] or −15 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / EN 50399, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, Suitable for Buildings, Plants, Fixed Installations, Medium Mechanical Stress, Forced-Movement Flexible Installations in Dry/Moist/Wet Environments, Automotive and Food Industry Applications, SIMOVERT Frequency Converter Integration, Industrial Pump/Ventilator/Conveyor/Air-Conditioning Systems, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration)
Technical Department
on08/05/2026

GAALFLEX® VFD 2XSLCYK

GAALFLEX® VFD 2XSLCYK: CPR-Compliant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building Applications, Industrial Frequency Converter Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Cca-s3,d1,a3 Fire Classification [Low Smoke, Zero Halogen, Minimal Toxicity], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Halogen-Free Performance, Low Corrosive Gas Emission, and Superior Thermal Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black RAL 9005 PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +70°C [Fixed Laying] or −15 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / EN 50399, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, Suitable for Buildings, Plants, Fixed Installations, Medium Mechanical Stress, Forced-Movement Flexible Installations in Dry/Moist/Wet Environments, Automotive and Food Industry Applications, SIMOVERT Frequency Converter Integration, Industrial Pump/Ventilator/Conveyor/Air-Conditioning Systems, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration)
9 Min Read
GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
Technical Department
on08/05/2026

GAALFLEX® VFD 1000 (2YSLCYK-J UL)

GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
7 Min Read
GAALFLEX® CONTROL 600 SC CY: Dual-Standard Single-Core Shielded Power and Protective Earth Grounding Cable for Building Electrical Systems and EMI-Sensitive Infrastructure (IEC/DIN VDE 0.6/1 kV Nominal Voltage [UL/CSA 600V Option Available], 4 kV Test Voltage, Single-Core Shielded Architecture with Overall Tinned Copper Braid Screen Providing EMI Suppression Without Cable Size Inflation, Comprehensive 6–240 mm² Continuous Cross-Section Range Enabling Utility-Scale Substation Feeders Through Standard Residential Circuits, Green-Yellow Protective Earth Identification Enabling Permanent Electrical Conductor Coding, Small 4×D Fixed-Laying Bending Radius Enabling Tight Equipment Room Routing, Radiation Hardening (8×10⁶ cJ/kg) Supporting 40-Year Nuclear and Medical Infrastructure Design Life, Chemical Resistance and UV Resistance Enabling Outdoor Cable Routing, Class 5 Flexible Red Copper per IEC 60228, PVC Type TI2 Insulation and PVC Type TM2 Outer Sheath, Black (RAL 9005) Standard Identification with Green-Yellow Core Option, UL VW-1 and CSA FT1-FT2 Flame-Retardant Certification, Temperature Range −40 to +70°C Fixed Installation / +5 to +70°C Non-Continuously Flexible (DIN VDE), Extended −40 to +90°C Fixed Installation (UL/CSA Option), Complete Dual-Standard Compliance Enabling European and North American Market Acceptance, RoHS and CE Certification, Engineered for Building Electrical Distributions with EMI Suppression, Protective Earth Systems, Nuclear and Medical Infrastructure, Radiation-Hardened Applications, EMI-Sensitive Control Circuits, and Operations Where Complete Single-Core Shielded Standardization, Dual-Standard Certification, EMI Suppression, Radiation Hardening, and Professional Building Electrical Safety Are Mission-Critical Requirements)
Technical Department
on08/05/2026

GAALFLEX® CONTROL 600 SC CY

GAALFLEX® CONTROL 600 SC CY: Dual-Standard Single-Core Shielded Power and Protective Earth Grounding Cable for Building Electrical Systems and EMI-Sensitive Infrastructure (IEC/DIN VDE 0.6/1 kV Nominal Voltage [UL/CSA 600V Option Available], 4 kV Test Voltage, Single-Core Shielded Architecture with Overall Tinned Copper Braid Screen Providing EMI Suppression Without Cable Size Inflation, Comprehensive 6–240 mm² Continuous Cross-Section Range Enabling Utility-Scale Substation Feeders Through Standard Residential Circuits, Green-Yellow Protective Earth Identification Enabling Permanent Electrical Conductor Coding, Small 4×D Fixed-Laying Bending Radius Enabling Tight Equipment Room Routing, Radiation Hardening (8×10⁶ cJ/kg) Supporting 40-Year Nuclear and Medical Infrastructure Design Life, Chemical Resistance and UV Resistance Enabling Outdoor Cable Routing, Class 5 Flexible Red Copper per IEC 60228, PVC Type TI2 Insulation and PVC Type TM2 Outer Sheath, Black (RAL 9005) Standard Identification with Green-Yellow Core Option, UL VW-1 and CSA FT1-FT2 Flame-Retardant Certification, Temperature Range −40 to +70°C Fixed Installation / +5 to +70°C Non-Continuously Flexible (DIN VDE), Extended −40 to +90°C Fixed Installation (UL/CSA Option), Complete Dual-Standard Compliance Enabling European and North American Market Acceptance, RoHS and CE Certification, Engineered for Building Electrical Distributions with EMI Suppression, Protective Earth Systems, Nuclear and Medical Infrastructure, Radiation-Hardened Applications, EMI-Sensitive Control Circuits, and Operations Where Complete Single-Core Shielded Standardization, Dual-Standard Certification, EMI Suppression, Radiation Hardening, and Professional Building Electrical Safety Are Mission-Critical Requirements)
1 Min Read
GAALFLEX® CONTROL H07ZZ-F: Comprehensive Halogen-Free Fire-Safe Power Cable with Complete Single-Core and Multi-Core Standardization (1.5–500 mm² Single / 2–36 Core Multi) for Building Electrical Infrastructure (450/750V Nominal Voltage, 2.5 kV Test Voltage per DIN VDE 0281, Zero-Halogenated-Acid-Gas Release per IEC 60754-1 (
Technical Department
on08/05/2026

GAALFLEX® CONTROL H07ZZ-F

GAALFLEX® CONTROL H07ZZ-F: Comprehensive Halogen-Free Fire-Safe Power Cable with Complete Single-Core and Multi-Core Standardization (1.5–500 mm² Single / 2–36 Core Multi) for Building Electrical Infrastructure (450/750V Nominal Voltage, 2.5 kV Test Voltage per DIN VDE 0281, Zero-Halogenated-Acid-Gas Release per IEC 60754-1 (
9 Min Read
GAALFLEX® CONTROL 1000 SC CY: Radiation-Hardened Single-Core Shielded Control Cable for Nuclear Power Plants and Medical Linear Accelerator Facilities (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, 80 Mrad Cumulative Radiation Tolerance per Industry Standards Enabling Integration into Extreme Radiation Environments Including Nuclear Reactor Containment, Medical Linear Accelerator Beam-Shaping Rooms, and Gamma Sterilization Facilities, Class 5 Flexible Red Bare Copper per IEC 60228, PVC Type TI2 Insulation, Tinned-Copper-Braid Overall Screen Achieving ≥80 dB EMI Shielding, Black (RAL 9005) PVC Type TM2 Outer Sheath, Dual Color Options: Black Conductor or Green-Yellow Earth Protection Conductor, Chemical and UV Resistance Enabling Deployment in Outdoor Facility Perimeters and Industrial Processing Environments, Oil Resistance per DIN VDE 0473 and IEC 60811-2-1, Flame-Retardant and Self-Extinguishing per DIN VDE 0482, Temperature Range −40 to +80°C Fixed Installation / −5 to +80°C Flexible Deployment, 10×D Minimum Bending Radius, Maximum Short-Circuit Temperature +250°C, Standardized Cross-Section Portfolio Spanning 6 mm² Through 240 mm² per Single Core Enabling Complete Radiation-Hardened Electrical Integration from Small Control Circuits Through Large Power Distribution, RoHS and CE Certified, Engineered for Nuclear Facility Electrical Integration, Medical Linear Accelerator Control Systems, Gamma Sterilization Industrial Facilities, Extreme Radiation-Environment Signal and Power Distribution, and Mission-Critical Installations Where Cumulative Radiation Hardness and Shielded Single-Core Integrity Are Non-Negotiable Requirements)
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000 SC CY

GAALFLEX® CONTROL 1000 SC CY: Radiation-Hardened Single-Core Shielded Control Cable for Nuclear Power Plants and Medical Linear Accelerator Facilities (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, 80 Mrad Cumulative Radiation Tolerance per Industry Standards Enabling Integration into Extreme Radiation Environments Including Nuclear Reactor Containment, Medical Linear Accelerator Beam-Shaping Rooms, and Gamma Sterilization Facilities, Class 5 Flexible Red Bare Copper per IEC 60228, PVC Type TI2 Insulation, Tinned-Copper-Braid Overall Screen Achieving ≥80 dB EMI Shielding, Black (RAL 9005) PVC Type TM2 Outer Sheath, Dual Color Options: Black Conductor or Green-Yellow Earth Protection Conductor, Chemical and UV Resistance Enabling Deployment in Outdoor Facility Perimeters and Industrial Processing Environments, Oil Resistance per DIN VDE 0473 and IEC 60811-2-1, Flame-Retardant and Self-Extinguishing per DIN VDE 0482, Temperature Range −40 to +80°C Fixed Installation / −5 to +80°C Flexible Deployment, 10×D Minimum Bending Radius, Maximum Short-Circuit Temperature +250°C, Standardized Cross-Section Portfolio Spanning 6 mm² Through 240 mm² per Single Core Enabling Complete Radiation-Hardened Electrical Integration from Small Control Circuits Through Large Power Distribution, RoHS and CE Certified, Engineered for Nuclear Facility Electrical Integration, Medical Linear Accelerator Control Systems, Gamma Sterilization Industrial Facilities, Extreme Radiation-Environment Signal and Power Distribution, and Mission-Critical Installations Where Cumulative Radiation Hardness and Shielded Single-Core Integrity Are Non-Negotiable Requirements)
1 Min Read
GAALFLEX® CONTROL 1000 H: Fire-Safe Zero-Halogen Low-Smoke Multi-Core Control Cable for Critical Infrastructure and Fire-Code-Regulated Installations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free TI6 Core Insulation per DIN VDE 0482 and IEC 60754-1, Black (RAL 9005) UV-Resistant Halogen-Free Compound Type TM7 Outer Sheath Enabling Complete Zero Halogenated Acid Gas Release (HCl/HBr/HF
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000 H

GAALFLEX® CONTROL 1000 H: Fire-Safe Zero-Halogen Low-Smoke Multi-Core Control Cable for Critical Infrastructure and Fire-Code-Regulated Installations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free TI6 Core Insulation per DIN VDE 0482 and IEC 60754-1, Black (RAL 9005) UV-Resistant Halogen-Free Compound Type TM7 Outer Sheath Enabling Complete Zero Halogenated Acid Gas Release (HCl/HBr/HF
10 Min Read
GAALFLEX® CONTROL 1000: Cost-Optimized UV-Resistant Low-Voltage Industrial Multi-Core Control Cable for Outdoor and Building Electrical Distribution Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PVC Type TI1 Core Insulation, Black (RAL 9005) UV-Resistant PVC Type TM2 Outer Sheath Enabling Indefinite Outdoor Exposure Without Ultraviolet-Induced Embrittlement or Color Degradation, Black Color-Numbered Cores per EN 50334 Standard with Green-Yellow Earth Protection Conductors from 3 Cores, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 EN 50265-2-1 and IEC 60332-1-2, Oil and Chemical Resistant Properties Enabling Integration into Industrial Facilities with Mineral-Oil Exposure and Alkaline/Acidic Ambient Conditions, Temperature Range −40 to +80°C Fixed Installation / −5 to +70°C Flexible Deployment, 4×D Fixed Bending Radius / 15×D Flexible Installation, Unprecedented Standardized SKU Portfolio Spanning 2 to 61 Core Configurations with Cross-Section Range from 0.5 mm² to 150 mm² per Core Enabling Single-Product Standardization Across Complete Low-Voltage Electrical Distribution Systems, Building Wiring, Outdoor Lighting Distribution, Industrial Control Harnesses, and Cost-Sensitive Multi-Core Cable Applications, RoHS and CE Certified, Engineered for Building Electrical Systems, Outdoor Power and Control Distribution, Municipal and Street Lighting, Industrial Facility Electrical Harnesses, Cost-Sensitive Electrical Distribution, and Global Low-Voltage Installation Markets)
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000

GAALFLEX® CONTROL 1000: Cost-Optimized UV-Resistant Low-Voltage Industrial Multi-Core Control Cable for Outdoor and Building Electrical Distribution Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PVC Type TI1 Core Insulation, Black (RAL 9005) UV-Resistant PVC Type TM2 Outer Sheath Enabling Indefinite Outdoor Exposure Without Ultraviolet-Induced Embrittlement or Color Degradation, Black Color-Numbered Cores per EN 50334 Standard with Green-Yellow Earth Protection Conductors from 3 Cores, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 EN 50265-2-1 and IEC 60332-1-2, Oil and Chemical Resistant Properties Enabling Integration into Industrial Facilities with Mineral-Oil Exposure and Alkaline/Acidic Ambient Conditions, Temperature Range −40 to +80°C Fixed Installation / −5 to +70°C Flexible Deployment, 4×D Fixed Bending Radius / 15×D Flexible Installation, Unprecedented Standardized SKU Portfolio Spanning 2 to 61 Core Configurations with Cross-Section Range from 0.5 mm² to 150 mm² per Core Enabling Single-Product Standardization Across Complete Low-Voltage Electrical Distribution Systems, Building Wiring, Outdoor Lighting Distribution, Industrial Control Harnesses, and Cost-Sensitive Multi-Core Cable Applications, RoHS and CE Certified, Engineered for Building Electrical Systems, Outdoor Power and Control Distribution, Municipal and Street Lighting, Industrial Facility Electrical Harnesses, Cost-Sensitive Electrical Distribution, and Global Low-Voltage Installation Markets)