[email protected]

XLPE insulated power cable

6 Min Read
NEN 1010 is the Dutch national standard for low-voltage electrical installations, serving as the guideline for installation, expansion, and adaptation of electrical systems in the Netherlands. This standard is the Dutch implementation of the international HD-IEC 60364 series and is equivalent to the British BS7671 wiring regulations. Compliance with NEN1010 is mandatory for all construction projects in the Netherlands, including residential, commercial, and industrial buildings. The latest edition was released in 2020 (published 2021) and applies to any new installations, expansions, or adaptations of wiring networks.
Technical Department
on30/12/2025

What is NEN1010 Compliant Cable?

NEN1010 cable standard, NEN1010 compliant cable Netherlands, Dutch electrical cable regulations, CPR cable classification Dca Cca B2ca, KEMA approved cables, HD-IEC 60364 cable compliance, low voltage installation cable 1000V, YMz1K mbzh cable specifications, Z1G-YMz1Kas technical datasheet, Z10-YMz1Kas medium voltage cable, YMvK mb industrial cable, VG-YMvKas oil resistant cable, VO-YMvKas chemical resistant, EN 50575 certified cables, Construction Products Regulation cable, Netherlands building wire NEN1010, fire resistant cable Cca-s1-d1-a1, halogen free cable LSZH Netherlands, XLPE insulated power cable, Dutch wiring regulations 2020, evacuation route cable medium risk, hospital grade cable high risk, tunnel cable specifications 500m, IEC 60332 fire test cable, EN 50399 flame propagation test, smoke density EN 61034-2 cable, acid gas emission EN 60754 cable, short circuit rating 143 kA²s cable, 90°C continuous operation cable, flexible installation cable Class 5, fixed installation cable Class 2, underground distribution cable method D, cable tray installation method E, thermal insulation derating factor, ambient temperature correction factor, Dutch electrical safety standards, Benelux region electrical cables, European harmonized cable standards, low smoke zero halogen LSZH cable, fire performance cable testing, mechanical strength cable IEC 60811, electrical resistance testing cable, factory production control FPC cable
8 Min Read
High-voltage XLPE (Cross-Linked Polyethylene) insulated power cables rated at 36/60÷69(72.5) kV represent the backbone of modern power transmission infrastructure. These cables are specifically engineered for applications requiring exceptional electrical performance, thermal stability, and mechanical durability under demanding operational conditions.
Technical Department
on12/12/2025

HIGH-VOLTAGE XLPE POWER CABLE S36/60÷69(72.5) kV

The cable designations XRUHKXS, 2XS(FL)2Y, and N2XS(FL)2Y indicate specific construction standards and regional compliance requirements. According to the International Electrotechnical Commission, IEC 60840 defines test methods and performance requirements for high-voltage power cable systems with extruded insulation, covering systems designed for rated voltages above 30 kV (Um = 36 kV) up to and including 150 kV (Um = 170 kV).
11 Min Read
N2XS(FL)H cable, medium voltage cable, XLPE insulated cable, IEC 60502-2, LSZH cable, waterblocking cable, 12/20kV power cable, Feichun Cable, CPR compliant cable
Technical Department
on05/12/2025

What is N2XS(FL)H Medium Voltage Power Cable?

N2XS(FL)H cable designation represents a sophisticated medium voltage power distribution cable engineered for demanding industrial and infrastructure applications. This cable type combines cross-linked polyethylene (XLPE) insulation with a Low Smoke Zero Halogen (LSZH) outer sheath and incorporates dual-layer waterblocking technology, making it suitable for both internal and external installations where fire safety and environmental protection are paramount.