[email protected]

single-core

3 Min Read
EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
Technical Department
on15/05/2026

FLEXIFESTOON® (N)GRDGCGÖU-J

EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn’t interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption
8 Min Read
(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: - High bending flexibility (4×D minimum typical) - Fast rewind capability (240+ m/min rated speed) - Sustained torsion tolerance (±25°/1m continuous) - Extended temperature range (−50 to +80°C) - UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
Technical Department
on15/05/2026

(N)GRDGÖU-J Festoon Cable

(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: – High bending flexibility (4×D minimum typical) – Fast rewind capability (240+ m/min rated speed) – Sustained torsion tolerance (±25°/1m continuous) – Extended temperature range (−50 to +80°C) – UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
3 Min Read
H07BN4-F HAR Nomenclature Breakdown (per CEI 20-20/20-19): H = Harmonized standard designation (IEC 60227 compliance) Indicates cable meets international safety standards Full compatibility with European electrical regulations 07 = Voltage designation (Uo/U = 450/750V) 07 = 450/750V nominal voltage class (other classes: 03 = 300/500V, 04 = 400/690V) Testing: 3 kV test voltage (10 times nominal) B = Special feature (Flexible/Benign environment) B typically indicates bare or flexible conductor design (Standard = no letter designation) N = Rubber type designation N = Normally-proportioned sheath thickness (S = Slim/reduced, T = Thick/reinforced) For H07BN4-F: N = Standard thickness for 450/750V industrial use Insulation thickness: 1.2 mm per DIN VDE 0282 Sheath thickness: 1.0–1.5 mm per DIN VDE 0293 4 = Number of principal tests/features Typically indicates: (1) Temperature range, (2) Insulation type, (3) Sheath composition, (4) Mechanical properties certification F = Flexibility designation F = Fully flexible (can be wound on reels) (Other: S = Service-cord, C = Cable) H07BN4-F can be: Coiled on reel: Yes (reelable) Bent radius: Down to 4×D (normal use) to 2×D (close to terminal) Repeated winding: Yes (drum rating available) Continuous flexing: Yes (up to 50+ million cycles per EN 50266) HAR = Harmonics-compatible technology designation HAR = High-frequency harmonic and transient rated Specifically designed for: - VFD (variable frequency drive) motor circuits (up to 20 kHz switching) - Welding equipment (high current transients, multi-frequency content) - Industrial power electronics environments (distorted waveforms) HAR testing per EN 50334: Transient overvoltage withstand: 3× nominal voltage, sustained Harmonic content up to 50th harmonic: Fully rated Dv/dt immunity: >3 kV/µs (fast switching events) Comparison: Standard vs. HAR designation Standard H07BN4-F (without HAR): Frequency: Single 50/60 Hz only Total harmonic distortion (THD) limit: 20% acceptable (VFD typical) Transient immunity: Enhanced (3+ kV nominal test) Suitable for: VFD motors, welding, power electronics Cost: +8–12% premium over standard Application advantage: Single cable type serves both conventional and VFD circuits
Technical Department
on15/05/2026

FLEXIFESTOON® H07BN4-F

H07BN4-F HAR Nomenclature Breakdown (per CEI 20-20/20-19): H = Harmonized standard designation (IEC 60227 compliance) Indicates cable meets international safety standards Full compatibility with European electrical regulations 07 = Voltage designation (Uo/U = 450/750V) 07 = 450/750V nominal voltage class (other classes: 03 = 300/500V, 04 = 400/690V) Testing: 3 kV test voltage (10 times nominal) B = Special feature (Flexible/Benign environment) B typically indicates bare or flexible conductor design (Standard = no letter designation) N = Rubber type designation N = Normally-proportioned sheath thickness (S = Slim/reduced, T = Thick/reinforced) For H07BN4-F: N = Standard thickness for 450/750V industrial use Insulation thickness: 1.2 mm per DIN VDE 0282 Sheath thickness: 1.0–1.5 mm per DIN VDE 0293 4 = Number of principal tests/features Typically indicates: (1) Temperature range, (2) Insulation type, (3) Sheath composition, (4) Mechanical properties certification F = Flexibility designation F = Fully flexible (can be wound on reels) (Other: S = Service-cord, C = Cable) H07BN4-F can be: Coiled on reel: Yes (reelable) Bent radius: Down to 4×D (normal use) to 2×D (close to terminal) Repeated winding: Yes (drum rating available) Continuous flexing: Yes (up to 50+ million cycles per EN 50266) HAR = Harmonics-compatible technology designation HAR = High-frequency harmonic and transient rated Specifically designed for: – VFD (variable frequency drive) motor circuits (up to 20 kHz switching) – Welding equipment (high current transients, multi-frequency content) – Industrial power electronics environments (distorted waveforms) HAR testing per EN 50334: Transient overvoltage withstand: 3× nominal voltage, sustained Harmonic content up to 50th harmonic: Fully rated Dv/dt immunity: >3 kV/µs (fast switching events) Comparison: Standard vs. HAR designation Standard H07BN4-F (without HAR): Frequency: Single 50/60 Hz only Total harmonic distortion (THD) limit: 20% acceptable (VFD typical) Transient immunity: Enhanced (3+ kV nominal test) Suitable for: VFD motors, welding, power electronics Cost: +8–12% premium over standard Application advantage: Single cable type serves both conventional and VFD circuits
9 Min Read
GAALFLEX® CONTROL 07BQ-F PUR: Professional-Grade Single-Core Heavy-Load Power Tool Cable with Comprehensive 16–300 mm² Continuous Range and Industrial-Strength Job-Site Durability (450/750V Nominal Voltage, 2.5 kV Test Voltage per DIN VDE 0281, Designed Specifically for High-Power Hand-Held Electric Equipment and Industrial Portable Systems Including Concrete Breakers, Heavy-Duty Angle Grinders, Industrial Drills, and Temporary Construction Power Distribution, Flexible 10×D Bending Radius Enabling Professional Job-Site Routing Through Complex Terrain and Equipment Integration Without Space Constraints, Complete Single-Core 16–300 mm² Portfolio Enabling Unified Heavy-Load Application Specification from Substation-Scale Feeders Through Heavy Portable Equipment, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Rubber-Compound Insulation Optimized for Heavy-Load Durability and Electrical Safety, Orange (RAL 2003) PUR Outer Sheath with Selectable Black (L) or Green-Yellow (PE) Core Identification Enabling Instant Phase/Ground Identification Without Reference Documentation, Comprehensive Chemical, UV, and Abrasion Resistance Enabling Robust Job-Site Routing Through Chemical Spill Areas, Extended Sun Exposure, and Pipe Clamp Integration Without Insulation Degradation, Suitable for Dry, Humid, and Wet Environments Enabling Deployment in Rainy Conditions and Damp Construction Sites, Outdoor Use Support Within Temperature Range (−40 to +90°C Both Fixed and Flexible) Enabling Year-Round Heavy-Load Job-Site Operations, Layered Stranding Architecture Optimizing Flexibility and Copper Density for Large-Diameter Single Cores, RoHS and CE Certified, Not Suitable for Underground Laying, Engineered for Heavy-Load Construction Sites, Industrial Job Sites, Temporary Power Distribution Systems, Heavy-Duty Portable Equipment Operations, Concrete and Heavy Equipment Contractor Applications, and Applications Where Comprehensive Single-Core Coverage, High-Current Capacity, Environmental Durability, and Professional Heavy-Load Reliability Are Operational Requirements)
Technical Department
on07/05/2026

GAALFLEX® CONTROL 07BQ-F

GAALFLEX® CONTROL 07BQ-F PUR: Professional-Grade Single-Core Heavy-Load Power Tool Cable with Comprehensive 16–300 mm² Continuous Range and Industrial-Strength Job-Site Durability (450/750V Nominal Voltage, 2.5 kV Test Voltage per DIN VDE 0281, Designed Specifically for High-Power Hand-Held Electric Equipment and Industrial Portable Systems Including Concrete Breakers, Heavy-Duty Angle Grinders, Industrial Drills, and Temporary Construction Power Distribution, Flexible 10×D Bending Radius Enabling Professional Job-Site Routing Through Complex Terrain and Equipment Integration Without Space Constraints, Complete Single-Core 16–300 mm² Portfolio Enabling Unified Heavy-Load Application Specification from Substation-Scale Feeders Through Heavy Portable Equipment, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Rubber-Compound Insulation Optimized for Heavy-Load Durability and Electrical Safety, Orange (RAL 2003) PUR Outer Sheath with Selectable Black (L) or Green-Yellow (PE) Core Identification Enabling Instant Phase/Ground Identification Without Reference Documentation, Comprehensive Chemical, UV, and Abrasion Resistance Enabling Robust Job-Site Routing Through Chemical Spill Areas, Extended Sun Exposure, and Pipe Clamp Integration Without Insulation Degradation, Suitable for Dry, Humid, and Wet Environments Enabling Deployment in Rainy Conditions and Damp Construction Sites, Outdoor Use Support Within Temperature Range (−40 to +90°C Both Fixed and Flexible) Enabling Year-Round Heavy-Load Job-Site Operations, Layered Stranding Architecture Optimizing Flexibility and Copper Density for Large-Diameter Single Cores, RoHS and CE Certified, Not Suitable for Underground Laying, Engineered for Heavy-Load Construction Sites, Industrial Job Sites, Temporary Power Distribution Systems, Heavy-Duty Portable Equipment Operations, Concrete and Heavy Equipment Contractor Applications, and Applications Where Comprehensive Single-Core Coverage, High-Current Capacity, Environmental Durability, and Professional Heavy-Load Reliability Are Operational Requirements)