飞纯 Type 245 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用非常柔性长壁采煤机电缆，电压范围覆盖 1.1 至 6.6KV。根据产品资料，该电缆主要用作长壁采煤机电缆，也可用于连续采煤机和长壁外围电缆。 Type 245 的关键结构特征是三根中央可伸长 Pilot / 控制芯线。这三根中央 Pilot 芯线可用于接地连续性监测和控制回路。对于长壁采煤机来说，电缆不仅要传输动力电能，还要承担设备控制、保护联锁、接地连续性确认和移动工况下的安全监测任务。

on23/06/2026

O que é o PANZERFLEX-ELX MV: Análise de Engenharia Aprofundada do Cabo de Carretel de Alta Velocidade de Média Tensão 3,6/6 a 12/20 kV

O PANZERFLEX-ELX MV é um cabo flexível de média tensão para sistemas de carretel (reeling), projetado para a alimentação de partes móveis de máquinas e equipamentos de movimentação de granéis sob esforços mecânicos de altos a extremos. Empilhadeiras-recuperadoras, descarregadores de navio (ship-to-shore), pórticos de contêiner e escavadeiras são suas aplicações-alvo, com adequação também a sistemas de festão. Sua marca registrada é o desempenho dinâmico: flexão e torção frequentes, movimento rápido com forte aceleração e velocidade de até 180 m/min sem restrição de operação — três vezes a velocidade típica de um cabo de tunelamento. Para sustentar isso, ele reúne condutor de cobre estanhado classe 5, isolação HEPR micro-filtrada de novo composto, controle de campo por blindagens semicondutoras, passo de cabeamento curto e uma trança têxtil anti-torção firmemente aderida entre as bainhas de PCP.

Type 210 1.1/1.1KV 是一种面向矿山移动供电场景的高柔性拖曳电缆。资料明确指出其主要应用于 hand-held boring machines and drills，即手持式凿岩机、钻机以及类似高机械应力移动设备。与普通低压橡套软电缆相比，Type 210 的技术边界从一开始就包含了移动、拖曳、弯曲、振动、磨损、接地连续性和 Pilot 控制/保护功能。在澳洲矿山、地下煤矿、露天矿、采石场、矿石码头、散货码头和重载移动设备现场，电缆的失效往往不是单一电气问题，而是导体疲劳、护套磨耗、内部结构位移、接地中断、Pilot 回路异常和设备振动共同作用的结果。飞纯 Type 210 通过柔性镀锡退火铜导体、EPR 绝缘、半导电弹性体绝缘屏蔽、复合屏蔽接地导体、半导电 PCP cradle separator、中央可伸长 Pilot 芯线和重型 PCP 护套，形成一个完整的矿用移动供电结构。

Technical Department

on23/06/2026

O que é o TUNNELFLEX-TTX: Análise de Engenharia Aprofundada do Cabo de Média Tensão 3,6/6 a 12/20 kV COM Proteção Anti-Torção

O TUNNELFLEX-TTX RS-(N)TSCGEWOEU é a versão de média tensão da família TUNNELFLEX equipada com proteção anti-torção — uma trança de malha aberta de fios sintéticos aplicada entre a manta interna e a bainha externa de PCP. Ele alimenta equipamentos móveis com alto risco de dano mecânico em tunelamento, nas mesmas quatro classes de tensão do TUNNELFLEX-TX (3,6/6 a 12/20 kV), mas para sistemas em que o cabo não é apenas defletido em um plano, e sim torcido em torno do próprio eixo durante o serviço. O TTX completa a família: ele está para o TX assim como o R/PUR está para o PUR na baixa tensão — a mesma construção elétrica, acrescida do elemento que absorve o esforço torcional.

La vida útil de los cables móviles de carrete, festón y canasta depende, en gran medida, de la instalación y del diseño del sistema de enrollado. Este manual abarca radios de curvatura, guías, protección de tensión, anclaje, selección de carrete y eliminación de torsión, junto con los métodos eléctricos de capacidad de corriente, reducción (derating), caída de tensión y cortocircuito.

Technical Department

on23/06/2026

O que é a Família TUNNELFLEX: Análise de Engenharia Aprofundada dos Cabos Flexíveis de Baixa e Média Tensão para Mineração e Tunelamento

A família TUNNELFLEX é uma plataforma de cabos flexíveis para a alimentação de equipamentos móveis com alto risco de dano mecânico em mineração e tunelamento. Ela é organizada em torno de uma mesma filosofia — condutores de cobre classe 5 de construção especial para serviço móvel e bainhas de altíssima resistência mecânica — declinada em três respostas distintas: o TUNNELFLEX-PUR 0,6/1 kV, sem proteção anti-torção, para deflexão em um único plano; o TUNNELFLEX-R/PUR 0,6/1 kV, com uma malha sintética anti-torção que habilita o cabo a tolerar torção; e o TUNNELFLEX-TX RS-(N)TSCGEWOEU de média tensão, de 3,6/6 a 12/20 kV, com isolação HEPR-MV e blindagens semicondutoras para o controle de campo elétrico exigido pela média tensão. Em conjunto, a família cobre desde a alimentação de máquinas auxiliares até o acionamento de equipamentos pesados de escavação de túnel em 20 kV.

Hybrid Cable Innovation: Dual-Voltage Architecture for Building Lifts The FLEXIDRUM® BASKET LIFT 731 represents a revolutionary engineering approach to hoisting cables for building construction lifts. Unlike traditional single-voltage cables that require separate control and power conductors, the 731 integrates dual-voltage capability (300/500V control + 0.6/1kV power) into a single hybrid structure. This hybrid design is specifically engineered for modern building hoist systems operating in construction environments, where: Control circuits (300/500V) manage speed control, safety interlocks, load monitoring, and emergency descent systems Power circuits (0.6/1kV) drive the main hoist motor (typically 15–50 kW capacity) Single cable run simplifies installation—no separate routing for control vs. power, reducing labor costs ~30% Space efficiency eliminates need for dual-cable management on building facades Safety redundancy through separate insulation layers ensures control circuit failure doesn't disable power monitoring The BASKET LIFT 731's architecture is distinctly different from port crane cables (SPREADER 740/750) and terrestrial industrial cables, reflecting the unique requirements of vertical construction lift systems where personnel safety depends on reliable signal transmission alongside high-power motor control.

Technical Department

on23/06/2026

O que é o TENAX-SAS (N)TSCGEWOEU 3,6/6 kV: uma análise técnica aprofundada do cabo de média tensão de alta flexibilidade, alta resistência à tração e elevada resistência à abrasão para equipamentos móveis pesados de mineração

O TENAX-SAS (N)TSCGEWOEU 3,6/6 kV é um cabo de média tensão concebido para trailing e reeling em condições mecânicas severas, como pás elétricas, shovels, draglines e outros equipamentos móveis de grande porte em mineração. Seu valor técnico não está apenas na classe de tensão, mas no equilíbrio entre flexibilidade extrema em baixas temperaturas, robustez de bainha, resistência à tração contínua, integridade elétrica do sistema semicondutivo e estabilidade estrutural sob abrasão, torção, flexão repetitiva e deslocamentos contínuos sobre terreno agressivo.

Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables for port equipment, container terminals, and offshore platforms — from conductor architecture and EPR insulation to steel wire armour (M2) design rationale, galvanic corrosion protection mechanisms, environmental compliance, and validated performance benchmarking against Nexans Eproneo Port and Prysmian marine systems.

Technical Department

on23/06/2026

O que é PROTOLON (M) R-(N)TSCGEWOEU Arctic -50C 6/10KV: Análise Técnica do Cabo de Média Tensão para Enrolamento Flexível até -50°C

O PROTOLON (M) R-(N)TSCGEWOEU Arctic -50C 6/10KV é um cabo flexível de média tensão para enrolamento, desenvolvido para grandes máquinas móveis de manuseio de material em minas a céu aberto, como escavadeiras elétricas, dumpers e britadores móveis. Sua característica decisiva é a capacidade de operar de forma totalmente flexível até -50°C, mantendo a arquitetura de cabo de carretel para altas solicitações mecânicas: condutores de cobre classe FS, sistema isolante EPR PROTOLON, camadas semicondutoras, condutor de proteção dividido em três interstícios, reforço de poliéster e capa externa PCP resistente a abrasão, óleo, ozônio, radiação UV e água do mar.

C PUR Design Integration: FLEXIFESTOON PUR characteristics (inherited): Outer sheath: PUR (polyurethane, compact) Insulation: Special TPE (superior elongation) Central unit: Textile (mechanical support) Weight: 25–30% lighter than standard rubber Diameter: 15–20% smaller than rubber equivalent Cost: +15–25% premium over rubber Service life: 10–15 years (extended) Screened design addition (new): Screen: Tinned copper braid (EMC shielding) Coverage: 80–90% (good EMC performance) Diameter impact: +2–3 mm (screen adds ~3 mm to diameter) Weight impact: +500 kg/km (braid + outer sheath) Cost: Additional +10–15% for screen layer Combined C PUR result: vs. Unscreened PUR (FLEXIFESTOON PUR): FLEXIFESTOON PUR: Minimal diameter/weight, no EMC C PUR: Slightly larger (screen added), excellent EMC Choice: PUR for maximum compactness (non-EMI environments) C PUR for VFD motors, confined spaces with EMC requirements vs. Standard rubber screened (GRDGCGÖU-J): GRDGCGÖU-J: Standard diameter, heavy, rubber durability C PUR: Compact diameter, lightweight, superior oil/chemical resistance Choice: GRDGCGÖU-J for simple temporary festoon C PUR for permanent industrial machine tool installation Nomenclature: FLEXIFESTOON® = Product family (flexible cable) C = Screen (copper braid, "C" from German "Schirm") PUR = Material (polyurethane jacket) Result: "FLEXIFESTOON C PUR" = Screened compact polyurethane cable

Technical Department

on23/06/2026

O que é PROTOLON (M) R-(N)TSCGEWOEU LWL 6/10KV: Análise Técnica do Cabo de Média Tensão para Enrolamento com Fibra Óptica Integrada

O PROTOLON (M) R-(N)TSCGEWOEU LWL 6/10KV é um cabo flexível de média tensão para enrolamento, projetado para grandes máquinas móveis de manuseio de material, como escavadeiras elétricas, dumpers, britadores móveis, equipamentos de mineração a céu aberto, empilhadeiras e recuperadoras de minério, shiploaders, descarregadores de navios e sistemas de pátio de granéis. Sua particularidade está em combinar, dentro de uma única seção transversal, alimentação elétrica de 6/10 kV, condutores de proteção divididos, blindagem semicondutora, isolação EPR, reforço mecânico por trança de poliéster, capa externa PCP resistente à abrasão e um elemento óptico LWL para comunicação imune a interferência eletromagnética.

A dragline excavator represents one of the largest continuous-duty electrical machines on Earth. Modern draglines (typical bucket capacity 100–150 cubic meters) routinely excavate 100,000+ tons of overburden daily from coal and metallic mines. A single large dragline requires continuous electrical power input of 5–10 megawatts to operate the bucket hoist mechanism, drag mechanism, swing drive, and positioning systems. This extraordinary power demand requires high-voltage transmission (typically 11kV or higher) to minimize resistive losses and keep conductor sizes manageable. 拉铲挖掘机代表地球上最大的连续负荷电机之一。现代拉铲(典型斗容量100-150立方米)经常从煤炭和金属矿山每天挖掘100,000多吨覆盖层。单个大型拉铲需要连续电力输入5-10兆瓦来操作斗提升机构、拖拽机构、摇摆驱动和定位系统。这种非凡的功率需求需要高压传输(通常11kV或更高)以最小化电阻损耗并保持导体大小可管理。

Technical Department

on05/03/2026

High-Voltage Draglines: Specifications for (N)TSCGEWÖU 3×185+3×35/3 11/11kV Australian Specs

A dragline excavator represents one of the largest continuous-duty electrical machines on Earth. Modern draglines (typical bucket capacity 100–150 cubic meters) routinely excavate 100,000+ tons of overburden daily from coal and metallic mines. A single large dragline requires continuous electrical power input of 5–10 megawatts to operate the bucket hoist mechanism, drag mechanism, swing drive, and positioning systems. This extraordinary power demand requires high-voltage transmission (typically 11kV or higher) to minimize resistive losses and keep conductor sizes manageable. 拉铲挖掘机代表地球上最大的连续负荷电机之一。现代拉铲(典型斗容量100-150立方米)经常从煤炭和金属矿山每天挖掘100,000多吨覆盖层。单个大型拉铲需要连续电力输入5-10兆瓦来操作斗提升机构、拖拽机构、摇摆驱动和定位系统。这种非凡的功率需求需要高压传输(通常11kV或更高)以最小化电阻损耗并保持导体大小可管理。

Underground Load-Haul-Dump (LHD) loaders represent the backbone of modern underground mining operations, performing the critical function of excavating, transporting, and depositing ore within confined tunnel environments. These machines operate under extreme conditions including continuous mechanical stress from reeling and unreeling operations, exposure to abrasive rock surfaces, high humidity levels often exceeding 90% relative humidity, and temperatures ranging from -25°C to +90°C in various mining environments worldwide. 地下铲运机(LHD)装载机代表了现代地下采矿作业的核心，执行在狭窄隧道环境中挖掘、运输和卸载矿石的关键功能。这些机器在极端条件下运行，包括卷绕和展开作业产生的持续机械应力、暴露于磨蚀性岩石表面、通常超过90%相对湿度的高湿环境，以及全球各种采矿环境中从-25°C到+90°C的温度范围。

Technical Department

on06/02/2026

Sandvik LH517 & LH621 Loaders: Why Type 241 Cables Last Longer in Shuttle Operations

Underground Load-Haul-Dump (LHD) loaders represent the backbone of modern underground mining operations, performing the critical function of excavating, transporting, and depositing ore within confined tunnel environments. These machines operate under extreme conditions including continuous mechanical stress from reeling and unreeling operations, exposure to abrasive rock surfaces, high humidity levels often exceeding 90% relative humidity, and temperatures ranging from -25°C to +90°C in various mining environments worldwide. 地下铲运机(LHD)装载机代表了现代地下采矿作业的核心，执行在狭窄隧道环境中挖掘、运输和卸载矿石的关键功能。这些机器在极端条件下运行，包括卷绕和展开作业产生的持续机械应力、暴露于磨蚀性岩石表面、通常超过90%相对湿度的高湿环境，以及全球各种采矿环境中从-25°C到+90°C的温度范围。

Type 241 trailing cables represent a specialized category of flexible power cables specifically engineered for underground coal mining applications and other demanding industrial environments. Manufactured in accordance with AS/NZS 1802 standards, these cables serve as the primary power transmission medium for continuous miners, shuttle cars, longwall machinery, and auxiliary equipment operating in confined underground spaces where environmental hazards, mechanical stresses, and limited visibility create unique safety challenges. Type 241拖曳电缆代表了一类专门为地下煤矿应用和其他苛刻工业环境而设计的柔性电力电缆。根据AS/NZS 1802标准制造，这些电缆作为连续采矿机、梭车、长壁开采机械和辅助设备的主要电力传输介质，在受限的地下空间中运行，这些空间存在环境危害、机械应力和有限的能见度等独特的安全挑战。

Technical Department

on27/01/2026

Why is Reflective Tape or Bright Coloring Required on Type 241 Trailing Cables for Underground Visibility?

Type 241 trailing cables represent a specialized category of flexible power cables specifically engineered for underground coal mining applications and other demanding industrial environments. Manufactured in accordance with AS/NZS 1802 standards, these cables serve as the primary power transmission medium for continuous miners, shuttle cars, longwall machinery, and auxiliary equipment operating in confined underground spaces where environmental hazards, mechanical stresses, and limited visibility create unique safety challenges. Type 241拖曳电缆代表了一类专门为地下煤矿应用和其他苛刻工业环境而设计的柔性电力电缆。根据AS/NZS 1802标准制造，这些电缆作为连续采矿机、梭车、长壁开采机械和辅助设备的主要电力传输介质，在受限的地下空间中运行，这些空间存在环境危害、机械应力和有限的能见度等独特的安全挑战。

PANZERFLEX-ELX MV is a premium medium voltage flexible reeling power cable series available in four voltage ratings from 3.6/6 kV to 12/20 kV. These cables represent the state-of-the-art in high-voltage flexible cable technology, specifically designed for mining operations and bulk material handling applications where equipment requires reliable power supply during continuous movement. The symmetrical design combined with narrow production tolerances ensures very low electromagnetic interference, making these cables ideal for sensitive industrial environments.

Technical Department

on23/12/2025

What is PANZERFLEX-ELX MV 3.6/6 to 12/20 kV Cable?

PANZERFLEX-ELX MV cable, PANZERFLEX-ELX MV 3.6/6kV, PANZERFLEX-ELX MV 6/10kV, PANZERFLEX-ELX MV 8.7/15kV, PANZERFLEX-ELX MV 12/20kV, reeling cable, medium voltage reeling cable, stacker reclaimer cable, ship to shore crane cable, STS crane cable, container crane cable, RTG crane cable, excavator cable, festoon system cable, cable reel system, mining reeling cable, bulk material handling cable, IEC 60228 Class 5, VDE 0250 part 813, DIN VDE 0298, HEPR insulation, micro-filtered HEPR, 3GI3 classification, 5GM3 compound, tinned copper conductor, polychloroprene sheath, PCP sheath, textile braid, anti-twisting cable, red sheath cable, 180 m/min reeling, 120 m/min festoon, high speed reeling, 90°C conductor, -40°C fixed installation, -30°C flexible, 250°C short circuit, low EMI cable, symmetrical design, 3×25+3×25/3, 3×50+3×25/3, 3×95+3×50/3, 3×120+3×70/3, 3×185+3×95/3, 3×240+3×120/3, PANZERFLEX-ELX MV電纜, 中壓卷筒電纜, 卷筒電纜, 堆料機電纜, 取料機電纜, 岸橋電纜, 集裝箱起重機電纜, 挖掘機電纜, 滑觸線電纜, 採礦電纜, 物料處理電纜, 鍍錫銅導體電纜, 防扭電纜, 高速卷繞電纜, 港口起重機電纜, Anhui Feichun cable, Feichun Special Cable, 安徽飛純電纜

TYPE 455 mining cables represent an optimized category of Class 2 heavy-duty elastomer-sheathed cables specifically engineered for applications demanding minimal cable diameter and reduced weight per meter while maintaining comprehensive electrical protection. Manufactured in strict accordance with AS/NZS 2802:2000 standards, these cables are designed for voltage ratings from 1.1 kilovolts to 11 kilovolts, with a construction philosophy emphasizing reduced insulation thickness and elimination of cradle separators to achieve lower overall mass and diameter. The incorporation of two earth conductors and one pilot conductor positioned in outer interstices, combined with EPR insulation and semiconductive screening systems, makes these cables particularly well-suited for stacker reclaimer installations, dragline operations, and other slow reeling applications where cable weight directly impacts equipment performance and operational efficiency. The design represents a strategic balance between electrical performance requirements and mechanical handling considerations, offering mining operations a purpose-built solution for specific application scenarios where traditional heavier cable constructions would impose unacceptable operational constraints.

Technical Department

on14/11/2025

What is TYPE 455 1.1 to 11kV Mining Cables to AS/NZS 2802:2000?

TYPE 455 mining cables represent an optimized category of Class 2 heavy-duty elastomer-sheathed cables specifically engineered for applications demanding minimal cable diameter and reduced weight per meter while maintaining comprehensive electrical protection. Manufactured in strict accordance with AS/NZS 2802:2000 standards, these cables are designed for voltage ratings from 1.1 kilovolts to 11 kilovolts, with a construction philosophy emphasizing reduced insulation thickness and elimination of cradle separators to achieve lower overall mass and diameter. The incorporation of two earth conductors and one pilot conductor positioned in outer interstices, combined with EPR insulation and semiconductive screening systems, makes these cables particularly well-suited for stacker reclaimer installations, dragline operations, and other slow reeling applications where cable weight directly impacts equipment performance and operational efficiency. The design represents a strategic balance between electrical performance requirements and mechanical handling considerations, offering mining operations a purpose-built solution for specific application scenarios where traditional heavier cable constructions would impose unacceptable operational constraints.

TYPE 260 Heavy-Duty Mining Cable: Comprehensive Technical Analysis

Technical Department

on14/11/2025

TYPE 260 Heavy-Duty Mining Cable: Comprehensive Technical Analysis

TYPE 260 mining cable represents a pinnacle of engineering excellence in the domain of heavy-duty electrical power transmission for mining operations. This pliable armoured cable, designed in strict accordance with Australian and New Zealand standards AS/NZS 1802:2003 and AS/NZS 2802:2000, serves as a critical feeder cable in demanding mining environments where exceptional impact resistance and mechanical durability are paramount operational requirements.