EMC Performance Classification: EMC rating scale (VDE/EN standards): Basic: No shielding (part 813 unscreened) Fair: Partial coverage, 30–40 mm spacing in braid Good: 80–90% coverage, 95% coverage, all gaps 30 dB attenuation @ 500 kHz: >40 dB attenuation @ 5 MHz: >35 dB attenuation (typical peak range) Expected: Tinned copper braid achieves 35–50 dB across frequency range Immunity to external interference: Motor variable frequency drive (VFD) nearby: VFD RF emission: Typically 50–200 mV/m at cable distance Unshielded cable susceptibility: 100–500 mV induced noise Shielded cable (good EMC): 1–10 mV induced noise (50–100× reduction) Consequence: VFD-driven crane motor doesn't interfere with control signals No false triggering of safety systems Data integrity in digital control systems maintained Radiated immunity testing (per EN 61000-4-3): Test standard: Cable exposed to RF field 50 MHz–1 GHz Test field strength: 10 V/m typical Acceptance: No malfunction, signal corruption

on12/06/2026

ÖLFLEX® CHARGE EV-(R)EYU: техническая статья о кабеле для зарядки электромобилей

ÖLFLEX® CHARGE EV-(R)EYU — это гибкий кабель для conductive AC charging system electric vehicle. Кабель предназначен для зарядки electric vehicles and plug-in hybrid vehicles, подходит для indoor and outdoor use, имеет DEKRA & CQC approvals, стойкость к маслам, химическим веществам, UV, ozone, scraping and grinding, а также halogen-free and flame-retardant construction.

BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in hoisting control cable design, specifically engineered for next-generation automated port crane systems operating under extreme environmental and operational constraints. Unlike the BASKET SPREADER 740's 300/500V AC specification, the 750 operates at 0.6/1kV AC with dual-voltage DC capability (0.9/1.8 kV)—a classification shift that enables: Higher power capacity – 2–3× greater amperage per conductor, enabling longer cable runs with lower voltage drop Medium-voltage infrastructure compatibility – Direct integration with port substation power distribution systems (0.6 kV = 600V three-phase industrial standard) DC dual-voltage operation – Simultaneous support for AC motor control and DC feedback/signaling circuits (0.9/1.8 kV DC margins) Extreme temperature capability – Operating range −50°C to +80°C (vs. SPREADER 740's −20°C to +60°C), addressing Arctic port terminals and tropical high-ambient scenarios Advanced insulation chemistry – GAALTHERM® 530 thermoplastic compound replaces standard PVC/PUR, delivering superior chemical resistance and thermal stability This cable bridges the gap between standard control cables (300/500V, limited temperature) and heavy industrial medium-voltage distribution cables, creating a purpose-built solution for modern automated gantry crane systems in global port terminals.

Technical Department

on11/06/2026

Что такое ÖLFLEX® TRAY 600: инженерный анализ гибкого многожильного кабеля UL 2277 / WTTC для промышленной техники и ветроустановок

ÖLFLEX® TRAY 600 — это гибкий многожильный кабель с UL-сертификацией, рассчитанный на plant engineering, industrial machinery, heating and air-conditioning systems, stage applications, outdoor use и wind turbine generator applications. По предоставленным данным он сочетает тонкопроволочные медные жилы класса 5, специальную ПВХ-изоляцию на базе UL 83 THW-2, послойную скрутку жил, чёрную специальную ПВХ-оболочку, UL 90°C WET rating, UL 1277 OIL RES I, UV resistance, ozone resistance, salty spray resistance и торсионную стойкость для проводников ≤16 mm²

FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)

Technical Department

on11/06/2026

Что такое ÖLFLEX® TRAY 600 SC: инженерный анализ гибкого одножильного кабеля UL 2277 Flexible Motor Supply Cable

ÖLFLEX® TRAY 600 SC — это гибкий одножильный кабель с UL-сертификацией, предназначенный для motor power supply, plant engineering, industrial machinery, heating and air-conditioning systems, stage applications, outdoor use и wind turbine generator applications. По предоставленным данным он сочетает специальную ПВХ-изоляцию на базе UL 83 THW-2, специальную чёрную ПВХ-наружную оболочку, класс 5 тонкопроволочной медной жилы, UL 90°C WET rating, sunlight resistance, oil resistance, ozone resistance, salty spray resistance и улучшенные огнестойкие характеристики.

GAALFLEX® CONTROL H05V2-K / H07V2-K: Advanced UL/CSA-Certified PVC Single-Conductor Industrial Control Cable (H05V2-K: 300/500 V DIN VDE / 600 V UL/CSA, H07V2-K: 450/750 V DIN VDE / 600 V UL/CSA, 2.5 kV Test Voltage per DIN VDE 0281 part 2, −20 to +90°C Fixed Laying / −5 to +90°C Flexible Application (DIN VDE), up to +105°C (UL/CSA Continuous Operation and Transient Short-Circuit Events), Class 5 Flexible Tinned Copper Conductor per IEC 60228 and DIN VDE 0295, PVC Type TI3 Black Outer Sheath (RAL 9005 Equivalent), AWM Style 1015 (105°C / 600 V), AWM Style 1569 (105°C / 300 V), AWM Style 1007 (80°C / 300 V), CSA Type TEW (105°C / 600 V and 80°C / 300 V variants), Dual-Standard Certification: DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 (European Harmonization) Plus UL 1581 UL VW-1 / CSA FT1 (North American UL/CSA Compliance), Flame Retardant and Self-Extinguishing, 4×D Minimum Bending Radius for Compact Panel Routing (Smallest Footprint in Class), NFPA 79 2018 Edition Compatibility for Electrical Safety and Color Coding, Green/Yellow Protective Earth per NFPA 79, Single-Core Architecture with 0.5 mm² to 120 mm² Cross-Section Range, 15+ Standardized SKU Configurations, Optional Flexible Conductor On Request, Harmonized per European Standards, RoHS and CE Certification with Optional CSA/UL On Request): Comprehensive Advanced North American Industrial Control & Renewable Energy Cable Architecture Analysis Integrating PVC Polymer Chemistry, Tinned Copper Conductor Metallurgy, UL/CSA Certification Pathways, Compact Bending-Radius Engineering, NFPA 79 Electrical Safety Architecture, North American Renewable Energy Integration, AWM Style Standardization, Industrial Control Panel Specification, and Next-Generation Dual-Standard (European + North American) Electrical Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL-H05V2-K & H07V2-K

GAALFLEX® CONTROL H05V2-K / H07V2-K: Advanced UL/CSA-Certified PVC Single-Conductor Industrial Control Cable (H05V2-K: 300/500 V DIN VDE / 600 V UL/CSA, H07V2-K: 450/750 V DIN VDE / 600 V UL/CSA, 2.5 kV Test Voltage per DIN VDE 0281 part 2, −20 to +90°C Fixed Laying / −5 to +90°C Flexible Application (DIN VDE), up to +105°C (UL/CSA Continuous Operation and Transient Short-Circuit Events), Class 5 Flexible Tinned Copper Conductor per IEC 60228 and DIN VDE 0295, PVC Type TI3 Black Outer Sheath (RAL 9005 Equivalent), AWM Style 1015 (105°C / 600 V), AWM Style 1569 (105°C / 300 V), AWM Style 1007 (80°C / 300 V), CSA Type TEW (105°C / 600 V and 80°C / 300 V variants), Dual-Standard Certification: DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 (European Harmonization) Plus UL 1581 UL VW-1 / CSA FT1 (North American UL/CSA Compliance), Flame Retardant and Self-Extinguishing, 4×D Minimum Bending Radius for Compact Panel Routing (Smallest Footprint in Class), NFPA 79 2018 Edition Compatibility for Electrical Safety and Color Coding, Green/Yellow Protective Earth per NFPA 79, Single-Core Architecture with 0.5 mm² to 120 mm² Cross-Section Range, 15+ Standardized SKU Configurations, Optional Flexible Conductor On Request, Harmonized per European Standards, RoHS and CE Certification with Optional CSA/UL On Request): Comprehensive Advanced North American Industrial Control & Renewable Energy Cable Architecture Analysis Integrating PVC Polymer Chemistry, Tinned Copper Conductor Metallurgy, UL/CSA Certification Pathways, Compact Bending-Radius Engineering, NFPA 79 Electrical Safety Architecture, North American Renewable Energy Integration, AWM Style Standardization, Industrial Control Panel Specification, and Next-Generation Dual-Standard (European + North American) Electrical Distribution