on12/05/2026

FLEXIDRUM® MEDIUM R 901

Tunnel Boring Machine Cable FLEXIDRUM® MEDIUM R 901 Single-Core High-Voltage Cable for Underground Tunneling Applications ⚡ Voltage: 8.7/15 kV to 12/20 kV 🔴 Screen: Red copper braid 🌡️ Temp: −50 to +80°C (extreme) ⚙️ Application: TBM tunneling machines Nominal Voltage 8.7/15 kV Up to 12/20 kV available Conductor Type Single-Core 1×25 to 1×150 mm² (red copper) Screen Red Copper Braid Conductive, corrosion-resistant grounding Max Speed 60 m/min Moderate-speed reel dragging Operating Temp −50 to +80°C Flexible: −30°C (thermal shielding) Tensile Strength ≤20 N/mm² Designed for tunnel flexibility

Single-mode fibres confine optical propagation to the fundamental LP₀₁ mode only — light travels essentially parallel to the fibre axis with minimal modal dispersion. Core: 9 μm diameter; cladding: 125 μm; cutoff wavelength: ~1,260 nm (ensuring only fundamental mode at 1,310/1,550 nm telecom bands). Advantage in reeling service: Modal dispersion (temporal spreading from different modes arriving at different velocities) is completely eliminated, enabling high-speed data (10–100 Gbps) over extended distances without signal degradation. For mission-critical automated port cranes transmitting high-definition video from STS gantry cameras, SMF is essential. Challenge: SMF is mechanically fragile — the 9 μm core is minuscule; any microbend creates mode coupling (fundamental mode energy leaks to radiated/cladding modes), causing signal loss. RHEYCORD®-OFE loose-tube jelly-fill is engineered to minimize mechanical stress on SMF.

Technical Department

on23/04/2026

RHEYCORD®-OFE Dynamic Optical Fibre Reeling Cable: Photonics-Electromagnetics-Materials Physics Deep-Dive

Single-mode fibres confine optical propagation to the fundamental LP₀₁ mode only — light travels essentially parallel to the fibre axis with minimal modal dispersion. Core: 9 μm diameter; cladding: 125 μm; cutoff wavelength: ~1,260 nm (ensuring only fundamental mode at 1,310/1,550 nm telecom bands). Advantage in reeling service: Modal dispersion (temporal spreading from different modes arriving at different velocities) is completely eliminated, enabling high-speed data (10–100 Gbps) over extended distances without signal degradation. For mission-critical automated port cranes transmitting high-definition video from STS gantry cameras, SMF is essential. Challenge: SMF is mechanically fragile — the 9 μm core is minuscule; any microbend creates mode coupling (fundamental mode energy leaks to radiated/cladding modes), causing signal loss. RHEYCORD®-OFE loose-tube jelly-fill is engineered to minimize mechanical stress on SMF.

HT-PNCT cable family represents a comprehensive, professional ecosystem of high-tension power distribution cables engineered to serve the complete spectrum of port equipment applications. Rather than a single cable type, HT-PNCT encompasses a carefully developed family of variants, each optimized for specific application requirements, electrical loads, environmental conditions, and operational constraints. The family architecture is organized around five core cable types: 1. HT-PNCT-RF — Reinforced Festoon variant with large conductor sizes (240–300 sq mm) and flexible sheath options (1.5, 2.5, 4.0 mm). Optimized for extended-span festoon applications with demanding tensile and environmental requirements. 2. HT-PNCT (Standard) — Non-shielded multi-core configuration (3–30 conductor cores) with optimized conductor size and sheath thickness combinations. Base specification for equipment without sensitive electronics or electromagnetic sensitivity. 3. HT-PNCT(S) — Shielded variant of standard cable featuring tinned copper braid shield. Engineered for equipment with variable frequency drive (VFD) motors, crane controls, and sensitive automation electronics requiring electromagnetic interference (EMI) attenuation. 4. HT-PNCT-R — Reinforced non-shielded variant with enhanced mechanical strength and extended tensile capacity. For applications requiring maximum tensile strength without electromagnetic protection needs. 5. HT-PNCT(S)-R — Premium reinforced-shielded variant combining maximum tensile strength with full electromagnetic protection. For next-generation high-power equipment with VFD systems and extreme service life requirements. This family structure enables terminal operators to select the optimal cable for each specific application—balancing performance, cost, environmental requirements, and operational constraints. The shared engineering platform across family members ensures interoperability and simplifies spare cable management.

Technical Department

on13/04/2026

Complete HT-PNCT High Tension Cable Family

HT-PNCT cable family represents a comprehensive, professional ecosystem of high-tension power distribution cables engineered to serve the complete spectrum of port equipment applications. Rather than a single cable type, HT-PNCT encompasses a carefully developed family of variants, each optimized for specific application requirements, electrical loads, environmental conditions, and operational constraints. The family architecture is organized around five core cable types: 1. HT-PNCT-RF — Reinforced Festoon variant with large conductor sizes (240–300 sq mm) and flexible sheath options (1.5, 2.5, 4.0 mm). Optimized for extended-span festoon applications with demanding tensile and environmental requirements. 2. HT-PNCT (Standard) — Non-shielded multi-core configuration (3–30 conductor cores) with optimized conductor size and sheath thickness combinations. Base specification for equipment without sensitive electronics or electromagnetic sensitivity. 3. HT-PNCT(S) — Shielded variant of standard cable featuring tinned copper braid shield. Engineered for equipment with variable frequency drive (VFD) motors, crane controls, and sensitive automation electronics requiring electromagnetic interference (EMI) attenuation. 4. HT-PNCT-R — Reinforced non-shielded variant with enhanced mechanical strength and extended tensile capacity. For applications requiring maximum tensile strength without electromagnetic protection needs. 5. HT-PNCT(S)-R — Premium reinforced-shielded variant combining maximum tensile strength with full electromagnetic protection. For next-generation high-power equipment with VFD systems and extreme service life requirements. This family structure enables terminal operators to select the optimal cable for each specific application—balancing performance, cost, environmental requirements, and operational constraints. The shared engineering platform across family members ensures interoperability and simplifies spare cable management.

HT-PNCT-F cable, Korean standard cable, high tension cable, port equipment cable, festoon-reel cable, unloader cable, stacker cable, reclaimer cable, gantry crane cable, tape braid reinforcement, 0.6/1KV cable, KSC 3317, IEC 60502-1, tape reinforcement, braid reinforcement, cable architecture, layer structure, synthetic tape, polyester tape, polypropylene tape, braid layer, glass-fiber reinforced nylon, hybrid reinforcement, tape-braid hybrid, load-carrying mechanism, copper conductor, Class 2 stranding, EP rubber insulation, chloroprene sheath, outer diameter, cable weight, conductor resistance, insulation resistance, test voltage, dielectric strength, tensile strength, flex-cycle endurance, impact resistance, bending flexibility, reelability, environmental durability, saltwater resistance, UV resistance, thermal cycling, flame retardance, operational temperature, 3-core configuration, 4-core configuration, conductor size range, ship unloader, gantry crane, stacker reclaimer, mobile harbour crane, conveyor drive system, reel preparation, minimum bend radius, cable winding, slip ring termination, preventive maintenance, insulation resistance test, quality assurance, electrical testing, mechanical testing, reinforcement layer testing, environmental testing, reel-specific testing, ASTM B117, IEC 60811, ISO 12947, IEC 60331-1, Feichun HT-PNCT-F, HT-PNCT-F-S shielded, HT-PNCT-F-EX enhanced braid, HT-PNCT-F-SX full premium, VFD cable, EMI shielding, port terminal, Busan port, Korean Industrial Standard, festoon power supply, reel-mounted equipment

Technical Department

on13/04/2026

HT-PNCT-F Korean Standard High Tension Cables

HT-PNCT-F cable, Korean standard cable, high tension cable, port equipment cable, festoon-reel cable, unloader cable, stacker cable, reclaimer cable, gantry crane cable, tape braid reinforcement, 0.6/1KV cable, KSC 3317, IEC 60502-1, tape reinforcement, braid reinforcement, cable architecture, layer structure, synthetic tape, polyester tape, polypropylene tape, braid layer, glass-fiber reinforced nylon, hybrid reinforcement, tape-braid hybrid, load-carrying mechanism, copper conductor, Class 2 stranding, EP rubber insulation, chloroprene sheath, outer diameter, cable weight, conductor resistance, insulation resistance, test voltage, dielectric strength, tensile strength, flex-cycle endurance, impact resistance, bending flexibility, reelability, environmental durability, saltwater resistance, UV resistance, thermal cycling, flame retardance, operational temperature, 3-core configuration, 4-core configuration, conductor size range, ship unloader, gantry crane, stacker reclaimer, mobile harbour crane, conveyor drive system, reel preparation, minimum bend radius, cable winding, slip ring termination, preventive maintenance, insulation resistance test, quality assurance, electrical testing, mechanical testing, reinforcement layer testing, environmental testing, reel-specific testing, ASTM B117, IEC 60811, ISO 12947, IEC 60331-1, Feichun HT-PNCT-F, HT-PNCT-F-S shielded, HT-PNCT-F-EX enhanced braid, HT-PNCT-F-SX full premium, VFD cable, EMI shielding, port terminal, Busan port, Korean Industrial Standard, festoon power supply, reel-mounted equipment

Japanese Standard High Tension (HT) cables with Kevlar® reinforcement represent the pinnacle of specialized power distribution technology for demanding marine port applications. Engineered to conform to Japanese Industrial Standards (JIS C 3317, JIS C 3350), these cables incorporate integrated aramid reinforced layers that dramatically enhance tensile strength while maintaining the flexibility required for reel-mounted equipment operation. The term "high tension" in Japanese maritime engineering refers specifically to the mechanical tension and longitudinal stress experienced by cables subjected to extreme operational demands—including extended unsupported spans, repetitive reel cycling, heavy dynamic loading, and sustained exposure to marine environments. Unlike standard port cables, Japanese Standard HT cables with Kevlar® reinforcement are engineered for applications where: • Unsupported cable spans exceed 40–60 meters between ship and shore equipment or between reel stations • Combined electrical load and mechanical tension create dual stress conditions requiring advanced material science • Long service life expectancy (7–10+ years) justifies premium reinforcement material investment • Environmental exposure to saltwater aerosol, UV radiation, and thermal cycling demands superior polymer formulation • High-availability terminal operations cannot tolerate premature cable failure and operational downtime The integration of Kevlar® aramid reinforcement layers represents a fundamental departure from conventional cable design. Rather than relying solely on rubber insulation and polymer sheathing to provide mechanical strength, Kevlar-reinforced cables employ a specialized tension layer that carries a portion of the cable's weight and operational stress, thereby reducing stress on the insulation and extending overall cable service life by 40–60% compared to unreinforced designs.

Technical Department

on13/04/2026

Japanese Standard High Tension Cables with Kevlar® Reinforcement

Japanese Standard High Tension (HT) cables with Kevlar® reinforcement represent the pinnacle of specialized power distribution technology for demanding marine port applications. Engineered to conform to Japanese Industrial Standards (JIS C 3317, JIS C 3350), these cables incorporate integrated aramid reinforced layers that dramatically enhance tensile strength while maintaining the flexibility required for reel-mounted equipment operation. The term “high tension” in Japanese maritime engineering refers specifically to the mechanical tension and longitudinal stress experienced by cables subjected to extreme operational demands—including extended unsupported spans, repetitive reel cycling, heavy dynamic loading, and sustained exposure to marine environments. Unlike standard port cables, Japanese Standard HT cables with Kevlar® reinforcement are engineered for applications where: • Unsupported cable spans exceed 40–60 meters between ship and shore equipment or between reel stations • Combined electrical load and mechanical tension create dual stress conditions requiring advanced material science • Long service life expectancy (7–10+ years) justifies premium reinforcement material investment • Environmental exposure to saltwater aerosol, UV radiation, and thermal cycling demands superior polymer formulation • High-availability terminal operations cannot tolerate premature cable failure and operational downtime The integration of Kevlar® aramid reinforcement layers represents a fundamental departure from conventional cable design. Rather than relying solely on rubber insulation and polymer sheathing to provide mechanical strength, Kevlar-reinforced cables employ a specialized tension layer that carries a portion of the cable’s weight and operational stress, thereby reducing stress on the insulation and extending overall cable service life by 40–60% compared to unreinforced designs.

9 Min Read

Technical Department

on13/04/2026

PNCT-F Flat Type Cables & Cable Specification System

PNCT-F designation identifies cables with a flat profile cross-section, as opposed to the standard round profile. While round cables are universal and flexible, flat cables offer specific advantages for certain port crane applications: Compact Storage and Handling: Flat cables pack more efficiently on drums and spools. A flat cable occupies approximately 15–20% less volume than a round cable of equivalent conductor area, reducing storage footprint and shipping volume. Improved Thermal Dissipation: The flat geometry increases surface area relative to volume, enabling better heat dissipation from the conductor. In high-current applications (large hoist motors), flat cables run cooler than round cables, reducing insulation aging and extending service life. Easier Cable Management: Flat cables lay flatter in cable troughs and festoon routes, reducing twisting and tangling. This property is particularly valuable in complex multi-cable installations where space is constrained. Lower Profile Aesthetics: For applications where cable profile affects equipment appearance or port terminal aesthetics, flat cables provide a lower-profile alternative.

Offshore drilling mud pumps represent some of the most mission-critical equipment on modern drilling platforms. These pumps are driven by variable frequency drive (VFD) systems that optimize power consumption and equipment performance through sophisticated electronic switching, yet this advanced power control technology introduces an insidious threat: VFD-induced electrical discharge machining (EDM) damage to motor bearings, known as fluting. When mud pumps experience unexpected bearing failure due to EDM fluting, unplanned downtime costs platform operators hundreds of thousands of dollars per day in lost production capacity.

Technical Department

on25/02/2026

2kV Type P VFD Cables: Preventing Motor Bearing Damage on Offshore Mud Pumps

Offshore drilling mud pumps represent some of the most mission-critical equipment on modern drilling platforms. These pumps are driven by variable frequency drive (VFD) systems that optimize power consumption and equipment performance through sophisticated electronic switching, yet this advanced power control technology introduces an insidious threat: VFD-induced electrical discharge machining (EDM) damage to motor bearings, known as fluting. When mud pumps experience unexpected bearing failure due to EDM fluting, unplanned downtime costs platform operators hundreds of thousands of dollars per day in lost production capacity.

11 Min Read

Technical Department

on30/01/2026

Joy Global (Komatsu) 7LS Longwall Shearer: (N)TSCGECEWÖU Drag Chain Cable Robustness Analysis

TSCGECEWÖU, NTSCGECEWÖU, TSKCGECWOEU, TSCGEWOEU, NSSHOEU, NTSCGEWOEU-CH, German mining cable, DIN cable, VDE cable, German cable standard, coal cutter cable CH, festoon cable FN, trailing cable W, screened cable designation, EPR mining cable

Shielding is one of the most critical structural elements in medium and high voltage mining cables, performing multiple vital functions that extend far beyond electromagnetic interference (EMI) protection. According to the U.S. Mine Safety and Health Administration (MSHA) regulations and IEC 60502 standards, shielding forms the first line of defense against ground faults, current leakage, and electromagnetic interference in harsh industrial environments. The letter "C" in German cable designations (such as NTSCGEWÖU) indicates the presence of a copper wire braided screen, while "CY" refers to compact copper shielding that provides 85% to 95% surface coverage, ensuring maximum protection in critical applications. In mining environments where equipment operates with variable frequency drives (VFDs), high-power motors, and sensitive monitoring systems, proper shielding is essential for both electrical safety and operational reliability. The IEEE 1580 standard for marine cables and ICEA S-75-381 for mining cables both specify detailed requirements for shielding construction and performance.

Technical Department

on16/01/2026

ما وظيفة التدريع في كابلات التعدين ومتى يكون تدريع CY ضرورياً؟

mining cable shielding, CY shielding, copper wire braid screen, EMI protection, MSHA cable, IEC 60502, DIN VDE 0250, ground fault protection, semiconductive layer, partial discharge, underground mining cable, trailing cable, VFD cable shielded, كابلات التعدين المدرعة, 礦用電纜屏蔽, electromagnetic interference, NTSCGEWÖU, NTMCGEWÖU, shield grounding

What is PROTOMONT EMV-FC (N)SSHCOEU 1 kV for Variable Frequency Converter? Complete technical guide to EMC-optimized motor power supply cables for frequency converter controlled drives in mining, construction, and industrial applications | Anhui Feichun Special Cable Co., Ltd. (安徽飞纯特种电缆有限公司)

Technical Department

on21/11/2025

What is PROTOMONT EMV-FC (N)SSHCOEU (-45°C) 1 kV for Variable Frequency Converter?

PROTOMONT EMV-FC (N)SSHCOEU represents a specialized category of EMC-optimized rubber-sheathed flexible cables engineered specifically for motor power supply applications in Variable Frequency Drive (VFD) controlled systems. These cables address one of the most significant challenges in modern industrial power distribution: electromagnetic compatibility in high-frequency switching environments. Variable Frequency Drives have revolutionized motor control in mining, construction, and industrial applications by providing precise speed regulation and energy efficiency. However, VFDs also introduce unique electrical challenges. As noted by cable engineering specialists, VFDs require specialized cabling to ensure reliable operation, minimize electromagnetic interference, and maintain safety for the system as a whole, because selecting the right cables and proper installation directly impact performance and equipment longevity (source: KEB America). The PROTOMONT EMV-FC series specifically addresses these challenges through its EMC-optimized concentric braid screen design, making it the ideal choice for frequency converter controlled drives in the mining industry, on construction sites, and similar applications with heavy mechanical stresses.

Technical Department

on21/11/2025