LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable

on17/06/2026

DR 717 P Highflex: высокогибкий барабанный кабель PUR/TMPU для пружинных кабельных барабанов на сценах и в театрах

DR 717 P Highflex — это высокогибкий кабель для пружинных кабельных барабанов, применяемых на сценах и в театрах. Кабель разработан для намотки и размотки, имеет специально подобранную послойную скрутку вокруг центрального несущего элемента, оболочку PUR/TMPU, поддерживающий экран из высокотехнологичной нити, малый наружный диаметр, небольшой вес и высокую механическую стойкость.

BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in hoisting control cable design, specifically engineered for next-generation automated port crane systems operating under extreme environmental and operational constraints. Unlike the BASKET SPREADER 740's 300/500V AC specification, the 750 operates at 0.6/1kV AC with dual-voltage DC capability (0.9/1.8 kV)—a classification shift that enables: Higher power capacity – 2–3× greater amperage per conductor, enabling longer cable runs with lower voltage drop Medium-voltage infrastructure compatibility – Direct integration with port substation power distribution systems (0.6 kV = 600V three-phase industrial standard) DC dual-voltage operation – Simultaneous support for AC motor control and DC feedback/signaling circuits (0.9/1.8 kV DC margins) Extreme temperature capability – Operating range −50°C to +80°C (vs. SPREADER 740's −20°C to +60°C), addressing Arctic port terminals and tropical high-ambient scenarios Advanced insulation chemistry – GAALTHERM® 530 thermoplastic compound replaces standard PVC/PUR, delivering superior chemical resistance and thermal stability This cable bridges the gap between standard control cables (300/500V, limited temperature) and heavy industrial medium-voltage distribution cables, creating a purpose-built solution for modern automated gantry crane systems in global port terminals.

Technical Department

on17/06/2026

DR 718 CP Highflex Reeling Cable: экранированный высокогибкий PUR/TMPU кабель для spring cable reels, театральных сцен и крановых стрел

DR 718 CP Highflex — это reeling cable with overall copper screen для spring cable reels, например на сценах в театрах, а также для применения как control cable in crane arms. Кабель имеет жилы из bare copper strands class 5, special polymer insulation, специально подобранную скрутку вокруг центрального несущего элемента, PUR/TMPU inner sheath, tinned copper braiding screen и чёрную PUR/TMPU outer sheath RAL 9005.

Lifting Cable vs. Festoon Cable: Festoon cable (FLEXIFESTOON series): Primary stress: Repeated bending at 4–6×D radius Speed: 60–240 m/min continuous reeling Bending cycles/year: 10–100 million cycles Insulation: Soft, highly flexible (TPE, EPR) Material: Rubber or PUR outer sheath (elastic) Design goal: Maximize fatigue life under bending Service life: 5–15 years (fatigue-limited) Cost: Moderate (commodity materials) LIFT-2S lifting cable: Primary stress: Sustained vertical tensile load Speed: Static (or very slow vertical movement) Bending cycles/year:

Technical Department

on15/06/2026

BASKETHEAVYFLEX 300/500 V 3GRDGÖU — гибкий кабель для gravity-fed collector basket operation

BASKETHEAVYFLEX 300/500 V 3GRDGÖU — это специализированный гибкий кабель для вертикальной эксплуатации с высокой механической нагрузкой, предназначенный для систем, где кабель собирается в накопительную корзину под действием силы тяжести. Такая кинематика требует не только гибкости, но и контролируемой самоукладки, устойчивости к растяжению, стабильности bundle-структуры, стойкости наружной оболочки и соблюдения правильного направления укладки в корзину.

C PUR Design Integration: FLEXIFESTOON PUR characteristics (inherited): Outer sheath: PUR (polyurethane, compact) Insulation: Special TPE (superior elongation) Central unit: Textile (mechanical support) Weight: 25–30% lighter than standard rubber Diameter: 15–20% smaller than rubber equivalent Cost: +15–25% premium over rubber Service life: 10–15 years (extended) Screened design addition (new): Screen: Tinned copper braid (EMC shielding) Coverage: 80–90% (good EMC performance) Diameter impact: +2–3 mm (screen adds ~3 mm to diameter) Weight impact: +500 kg/km (braid + outer sheath) Cost: Additional +10–15% for screen layer Combined C PUR result: vs. Unscreened PUR (FLEXIFESTOON PUR): FLEXIFESTOON PUR: Minimal diameter/weight, no EMC C PUR: Slightly larger (screen added), excellent EMC Choice: PUR for maximum compactness (non-EMI environments) C PUR for VFD motors, confined spaces with EMC requirements vs. Standard rubber screened (GRDGCGÖU-J): GRDGCGÖU-J: Standard diameter, heavy, rubber durability C PUR: Compact diameter, lightweight, superior oil/chemical resistance Choice: GRDGCGÖU-J for simple temporary festoon C PUR for permanent industrial machine tool installation Nomenclature: FLEXIFESTOON® = Product family (flexible cable) C = Screen (copper braid, "C" from German "Schirm") PUR = Material (polyurethane jacket) Result: "FLEXIFESTOON C PUR" = Screened compact polyurethane cable

Technical Department

on12/06/2026

Что такое ÖLFLEX® AUTO 8681 MC: гибкий PUR-кабель для автоматизации, кабельных цепей, подвижных машин и торсионных применений

ÖLFLEX® AUTO 8681 MC — это многожильный гибкий кабель 300/500 V для автоматизации, силовых цепей электрического оборудования, кабельных цепей, подвижных частей машин, станков, трансферных линий, сборочных и производственных линий. Его технический профиль основан на тонкопроволочной медной жиле VDE 0295 Class 6 / IEC 60228 Class 6, изоляции TPE, наружной оболочке PUR, высокой стойкости к маслам, истиранию и надрезам, низкоадгезионной поверхности, рабочем температурном диапазоне -40°C до +80°C, минимальном радиусе изгиба 5 × наружный диаметр при гибком применении и торсионной нагрузке до ±180°/м. Для инженеров автоматизации такой кабель важен не как обычный проводник питания, а как механически стойкий элемент машины, который должен переживать циклы движения, ускорения, скольжение в цепи, влажную среду, контакт с маслами и периодическую торсию.

FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)

Technical Department

on12/06/2026

Что такое ÖLFLEX® CLEANROOM FD 8110: инженерный анализ кабеля для CLEANROOM и moving chain applications

ÖLFLEX® CLEANROOM FD 8110 — это low voltage power and control cable for CLEANROOM. Кабель имеет unarmoured construction, PVC insulation and PVC outer sheath, stranded copper conductor according to IEC 60228 Class 6 and предназначен для power chains, moving machine parts, measuring, control and regulating circuits, assembly lines, production lines and all kinds of machines. В предоставленных данных указаны CLEANROOM classification for IPA Class 1, zero particle emission at moved chain application, low-adhesive surface and easy installation due to small cable diameter.

PUR vs. Rubber Sheath Comparison: EPR/PCP rubber (traditional festoon): Base polymer: Ethylene-propylene or chloroprene rubber Density: ~1.2 g/cm³ (light) Young's modulus: ~2–8 MPa (soft, flexible) Tear strength: 15–30 kN/m (adequate) Tensile strength: 8–12 MPa (moderate) Oil resistance: Fair (EPR), Good (CPE) Cost: Low (commodity material) Typical life: 5–10 years PUR (polyurethane, FLEXIFESTOON PUR): Base polymer: Polyol + isocyanate urethane linkage Density: ~1.25 g/cm³ (slightly heavier per unit volume, but better properties) Young's modulus: ~10–15 MPa (stiffer, stronger) Tear strength: 30–50 kN/m (2–3× better than rubber) Tensile strength: 12–18 MPa (much stronger) Oil resistance: Excellent (far superior to rubber) Cost: Medium (specialty material) Typical life: 10–15 years (50–100% longer) PUR performance advantages: (1) Tear resistance: Mechanism: Urethane linkages form strong hydrogen bonds More rigid polymer network, resists crack propagation Consequence: Cable survives snagging on sharp edges Abrasion resistance 2–3× better than rubber Application: Machine tool environments (sharp metal edges, high speed) (2) Oil immersion durability: Rubber swelling in oil: 8–15% volume increase PUR swelling in oil: 2–5% volume increase (excellent stability) Result: Cable diameter remains stable, connections don't loosen No electrical performance degradation from oil ingress (3) Ozone & UV resistance: Rubber degradation rate: 10–20% strength loss per 5 years outdoor PUR degradation rate: 5–10% strength loss per 5 years outdoor Application: Outdoor machine tools, conveying systems in sunlight (4) Mechanical stress recovery: Rubber behavior: After bending, slow recovery (viscoelastic) PUR behavior: Rapid recovery, lower hysteresis loss Benefit: Lower heating during high-speed cycling 240 m/min reeling applications tolerate higher duty cycles Cost-benefit trade-off: PUR premium cost: +15–25% vs. standard rubber festoon cable Justification for premium: - 2× longer service life (10–15 years vs. 5–10 years) - Reduced maintenance/replacement downtime in industrial operations - Superior performance in aggressive environments (oil, chemicals) - Better value when cost-of-downtime is high (machine tools, production lines)

Technical Department

on12/06/2026

Что такое ÖLFLEX® FIRE 6387 MC CONTROL: огнестойкий многожильный контрольный кабель 300/500 V для критически важных систем безопасности

ÖLFLEX® FIRE 6387 MC CONTROL — это огнестойкий многожильный контрольный кабель номинального напряжения U0/U 300/500 V, разработанный для проводки в критически важных системах безопасности общественных и промышленных зданий. В предоставленных технических данных кабель сертифицирован по BS 6387 Cat. CWZ, одобрен по IEC 60332-3-22 Cat. A, имеет безгалогенную малодымную оболочку LSHF, слюдяную огнестойкую ленту, XLPE-изоляцию и конструкцию до 24 жил. Его назначение — не только ограничивать распространение пламени, но и поддерживать работоспособность контрольной цепи в пожарном сценарии, когда аварийное освещение, BMS, резервное питание, лифты, дымоудаление, пожарная автоматика и системы эвакуации должны продолжать выполнять свою функцию.

H07RN-F: Advanced High-Flexibility Salt-Fog Resistant Port Cable Engineering Solution Specialized rubber-sheathed electrical cable engineered for extreme maritime and coastal port environments. H07RN-F combines superior mechanical flexibility (4×D minimum fixed-laying bending radius, 6×D flexible-application capability) with comprehensive salt-fog environmental resistance, enabling reliable 450/750V power distribution and control signaling in container gantry systems, ship loaders, and port automation infrastructure where conventional cables fail within 6–12 months of deployment.

Technical Department

on11/06/2026

Что такое H05RN-F / 60245 IEC 57(YZW): резиновый кабель для ручных устройств, инспекционных ламп, декоративных световых цепей и лёгких workshop tools

H05RN-F / 60245 IEC 57(YZW) — это резиновый кабель среднего класса нагрузки для питания бытовых и лёгких профессиональных устройств: household devices, kitchens, offices, handheld inspection lamps, chains of decorative lights and lightweight workshop tools subject to medium loads. Он имеет dual certification CCC and VDE в части типоразмеров, соответствует EN 50525-2-21, GB/T 5013.4 and IEC 60245.4, рассчитан на U0/U 300/500 V, имеет test voltage 2000 V, fine-wire class 5 copper conductor, rubber type EI4 core insulation, black rubber type EM2 outer sheath, flame-retardant behaviour according to IEC 60332-1-2 and oil resistance according to EN 60811-404. Для Feichun этот кабель является хорошим примером лёгкого/среднего rubber-sheath cable; для портов, рудников и тяжёлых машин его нельзя путать с heavy-duty mining, reeling or tensile-resistant cable.

UNE 22511 Design Philosophy: Ultimate Flexibility for Underground Mobile Equipment Within the taxonomy of mining cables, the distinction between the UNE 22511 and UNE 22512 standards represents a fundamental divergence in design philosophy — not merely a difference in specification parameters. Understanding this divergence is essential for engineers procuring replacement cables for underground coal mines in Spain, Chile, Colombia, and other markets operating under the AENOR (Asociación Española de Normalización y Certificación) regulatory framework. The UNE 22511 standard governs cables for flexible connection of mobile underground mining machinery — the specific class of heavy-duty cable designed for equipment that moves continuously during operation: continuous miners, longwall shearers, shuttle cars, and cable reel systems. The engineering DNA of a UNE 22511 cable can be summarized in a single phrase: engineered for mechanical endurance, not for static installation security. This philosophy manifests in every structural element of the cable: the conductor class, the insulation compound, the earth core arrangement, the absence of metallic armor, and the sheath compound selection. Each element is chosen not to maximize any single parameter but to achieve an optimal balance of torsional resilience, bending flexibility, and sheath durability under the combined mechanical loading of continuous dragging, occasional running-over by shuttle car wheels, and periodic full-tension pulling by cable reel drum systems.

Technical Department

on02/06/2026

YSLCY Shielded Control Cable | Anti-Interference | VDE 0250 | EAC & GOST Fire | Russia Factory

An engineering-grade technical reference for industrial electrical control installations across Russian Federation manufacturing facilities, automation systems, programmable logic controllers (PLCs), and distributed industrial infrastructure. This document explains the comprehensive electromagnetic shielding architecture that protects sensitive control signals from external noise sources in high-voltage industrial environments, establishes the twisted-pair core construction that provides signal integrity over extended cable runs, documents compliance with VDE 0250 mining and industrial cable standards, and provides performance specifications and field integration guidance for seamless deployment into automation networks operating in Russian factory and heavy industrial settings.

Spreader Bar Cable Application: What is a spreader bar? Container crane context: Gantry crane positioned at dock Overhead hoist mechanism: Winch + trolley system Spreader bar: Attachment point below hoist Function: Grips container corners, distributes load, tilts container for placement Spreader bar structure: Framework: Steel tubes/beams forming rectangular frame Lifting points: 4 corner attachment rings (one per container corner) Electrical system: Motor-driven locks, position sensors, lighting Cables: Power supply for motors + control signals for locking mechanism Cable location (spreader bar): Vertical run (primary): From crane hoist (top) down 20–40 m to spreader bar (bottom) Function: Supply power for: - Corner lock solenoids (release container locks) - Position feedback sensors (confirm locks engaged) - Optional: Spreader bar lighting (visibility during operation) Simultaneous function: Act as partial mechanical support (share load with main hoist cable) Horizontal distribution (on spreader bar): From entry point distributed across spreader frame Supply all four corner lock motors Branching: May split into smaller branches (4× circuits to corners) Mechanical load: Cable must withstand: Static tension: Weight of container payload (20–40 tons distributed) Dynamic loads: Jerking during load acceleration, swinging in wind Thermal: Tropical port environment, direct sun, saltwater spray Abrasion: Rubbing against spreader frame during operation Cable design philosophy: Dual function (unique): Electrical function: Deliver 300/500V power for locking system Mechanical function: Share load-bearing (not primary structure, but support role) Different from: Pure electrical cables (festoon, lifting): Electrical function only Pure mechanical ropes: Mechanical function only BASKET SPREADER 730: Both functions integrated Speed specification rationale: 160 m/min (relatively slow): Container crane cycle time: ~45–60 seconds per lift Descent distance: 20–40 m Descent speed: 20–40 m ÷ 45–60 sec = 0.33–0.9 m/s = 20–54 m/min Average speed: ~30 m/min (loading) + 20 m/min (discharge) = 25 m/min 160 m/min specification: 6–8× safety margin on speed Design: Allows for fast emergency ascent if needed Why not higher speed? Mechanical load constraint: Heavy cable (4000 N = ~400 kg equivalent) Inertia: Accelerating 400 kg + spreader bar + container inertia takes time Structural: Crane frame limits acceleration rates (safety interlocks) Result: 160 m/min is practical maximum for loaded spreader bar

Technical Department

on15/05/2026

BASKET SPREADER 730

Spreader Bar Cable Application: What is a spreader bar? Container crane context: Gantry crane positioned at dock Overhead hoist mechanism: Winch + trolley system Spreader bar: Attachment point below hoist Function: Grips container corners, distributes load, tilts container for placement Spreader bar structure: Framework: Steel tubes/beams forming rectangular frame Lifting points: 4 corner attachment rings (one per container corner) Electrical system: Motor-driven locks, position sensors, lighting Cables: Power supply for motors + control signals for locking mechanism Cable location (spreader bar): Vertical run (primary): From crane hoist (top) down 20–40 m to spreader bar (bottom) Function: Supply power for: – Corner lock solenoids (release container locks) – Position feedback sensors (confirm locks engaged) – Optional: Spreader bar lighting (visibility during operation) Simultaneous function: Act as partial mechanical support (share load with main hoist cable) Horizontal distribution (on spreader bar): From entry point distributed across spreader frame Supply all four corner lock motors Branching: May split into smaller branches (4× circuits to corners) Mechanical load: Cable must withstand: Static tension: Weight of container payload (20–40 tons distributed) Dynamic loads: Jerking during load acceleration, swinging in wind Thermal: Tropical port environment, direct sun, saltwater spray Abrasion: Rubbing against spreader frame during operation Cable design philosophy: Dual function (unique): Electrical function: Deliver 300/500V power for locking system Mechanical function: Share load-bearing (not primary structure, but support role) Different from: Pure electrical cables (festoon, lifting): Electrical function only Pure mechanical ropes: Mechanical function only BASKET SPREADER 730: Both functions integrated Speed specification rationale: 160 m/min (relatively slow): Container crane cycle time: ~45–60 seconds per lift Descent distance: 20–40 m Descent speed: 20–40 m ÷ 45–60 sec = 0.33–0.9 m/s = 20–54 m/min Average speed: ~30 m/min (loading) + 20 m/min (discharge) = 25 m/min 160 m/min specification: 6–8× safety margin on speed Design: Allows for fast emergency ascent if needed Why not higher speed? Mechanical load constraint: Heavy cable (4000 N = ~400 kg equivalent) Inertia: Accelerating 400 kg + spreader bar + container inertia takes time Structural: Crane frame limits acceleration rates (safety interlocks) Result: 160 m/min is practical maximum for loaded spreader bar

FLEXIFESTOON® PV-FLAT CY (VCVH6-F): Advanced High-Flexibility Flat Cable with Superior Anti-Salt Fog Protection for Port Equipment and Festoon Cargo-Handling Systems Professional-grade parallel-core flat cable engineered for aggressive marine environments. Features flexible red copper Class 5 conductors, PVC TI2 insulation, 10×D bending radius, UV/ozone/chemical resistance, and comprehensive salt-fog protection for automated port infrastructure, ship-to-shore cranes, cargo-handling equipment, and festoon systems operating at deployment velocities up to 120 m/min across high-corrosion maritime zones.

Technical Department

on13/05/2026

FLEXIFESTOON® PV-FLAT CY (VCVH6-F)

FLEXIFESTOON® PV-FLAT CY (VCVH6-F): Advanced High-Flexibility Flat Cable with Superior Anti-Salt Fog Protection for Port Equipment and Festoon Cargo-Handling Systems Professional-grade parallel-core flat cable engineered for aggressive marine environments. Features flexible red copper Class 5 conductors, PVC TI2 insulation, 10×D bending radius, UV/ozone/chemical resistance, and comprehensive salt-fog protection for automated port infrastructure, ship-to-shore cranes, cargo-handling equipment, and festoon systems operating at deployment velocities up to 120 m/min across high-corrosion maritime zones.

FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun's revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.

Technical Department

on13/05/2026

FLAT (NGFLGÖU) UL Reeling Cable

FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun’s revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.

Multi-Purpose Industrial Cable FLEXIDRUM® SPECIAL R 702 Highly Flexible, Customizable Cable for Heavy Appliances & Vertical Use ⚡ Voltage: 0.6/1 kV OR 300/500 V 🔧 Speed: 120 m/min max 🎯 Configurations: 40+ SKUs, fully customizable 🌡️ Temperature: −50 to +90°C Nominal Voltage 0.6/1 kV OR 300/500 V (customer selection) Test Voltage 4 kV / 2 kV Depending on voltage class Max Speed 120 m/min Moderate-speed reeling applications Operating Temp −50 to +90°C Fixed & flexible laying (highest in class) Bending Radius 3×d to 7.5×D Depends on application mode & cable size Configurations 40+ Power, control, signal, fiber-optic integration

Technical Department

on12/05/2026

FLEXIDRUM® SPECIAL R 702

Multi-Purpose Industrial Cable FLEXIDRUM® SPECIAL R 702 Highly Flexible, Customizable Cable for Heavy Appliances & Vertical Use ⚡ Voltage: 0.6/1 kV OR 300/500 V 🔧 Speed: 120 m/min max 🎯 Configurations: 40+ SKUs, fully customizable 🌡️ Temperature: −50 to +90°C Nominal Voltage 0.6/1 kV OR 300/500 V (customer selection) Test Voltage 4 kV / 2 kV Depending on voltage class Max Speed 120 m/min Moderate-speed reeling applications Operating Temp −50 to +90°C Fixed & flexible laying (highest in class) Bending Radius 3×d to 7.5×D Depends on application mode & cable size Configurations 40+ Power, control, signal, fiber-optic integration

GAALFLEX® SAFE CY: Shielded Intrinsically Safe Multi-Core Control Cable for Hazardous Area Measurement Systems (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Tinned Copper Braid Electromagnetic Interference Screen with Optimized Capacitance

Technical Department

on11/05/2026

GAALFLEX® SAFE CY Lean

GAALFLEX® SAFE CY: Shielded Intrinsically Safe Multi-Core Control Cable for Hazardous Area Measurement Systems (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Tinned Copper Braid Electromagnetic Interference Screen with Optimized Capacitance

GAALFLEX® SAFE: Intrinsically Safe Multi-Core Control Cable for Hazardous Area Equipment (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Blue PVC Type TM2 Outer Sheath per DIN VDE 0207, ATEX II 2G Intrinsic Safety Certification with Optimized Cable Capacitance/Inductance Parameters per EN 60079-14 Section 12.2.2, VDE 0165 Part 1 Approval, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 part 332-1-2 / IEC 60332-1-2, Water-Resistant per IEC 60811-402 and EN 50396, Oil-Resistant per CEI 20-34/2-1, Low Halogenated Decomposition Products per EN 50267-2, 15×D Minimum Bending Radius for Flexible Installation in Hazardous Equipment, Multi-Core Architecture with 2 to 64 Core Configurations, 0.5 mm² to 10 mm² Cross-Section Range per Core, Standardized SKU Portfolio (60+ Configurations), Optional Color-Numbered Cores per EN 50334, Engineered for Oil & Gas Drilling Platforms, Underground Coal & Metal Mining Operations, Chemical Processing Plants, Pharmaceutical Manufacturing Facilities, Food & Beverage Processing in Hazardous Zones, Petrochemical Refineries, Explosive Atmosphere Detection and Control Systems, and Classified Hazardous Area Electrical Distribution): Comprehensive Advanced Intrinsic Safety Control Cable Architecture Analysis Integrating Explosion-Proof Certification Chemistry, Hazardous Area Compliance Mechanisms, Intrinsic Safety Parameter Design, Class 5 Ultra-Flexible Conductor Mechanics, Water-Immersion Durability Engineering, Safety Barrier Circuit Integration Strategies, Class I Division 1/2 Equipment Wiring Specifications, ATEX II 2G Safety-Critical Cable Design, and Next-Generation Hazardous-Area-Compliant Electrical Distribution for Class I Division 1/2, ATEX II 2G, and Classified Explosive Atmosphere Equipment Requiring Intrinsically Safe Multi-Core Control Cable with Proven Hazardous-Area-Grade PVC Chemistry, Extreme Temperature Stability (−40 to +80°C), DIN EN 60079-14 Intrinsic Safety Certification, IEC 60811-402 Water-Immersion Durability, CEI 20-34/2-1 Oil-Resistance, and Seamless Integration into Hazard-Compliant Electrical Distribution Architectures

Technical Department

on11/05/2026

GAALFLEX® SAFE

GAALFLEX® SAFE: Intrinsically Safe Multi-Core Control Cable for Hazardous Area Equipment (300/500 V Nominal, 3 kV Test Voltage per DIN EN 60079-14, −40 to +80°C Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Blue PVC Type TM2 Outer Sheath per DIN VDE 0207, ATEX II 2G Intrinsic Safety Certification with Optimized Cable Capacitance/Inductance Parameters per EN 60079-14 Section 12.2.2, VDE 0165 Part 1 Approval, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 part 332-1-2 / IEC 60332-1-2, Water-Resistant per IEC 60811-402 and EN 50396, Oil-Resistant per CEI 20-34/2-1, Low Halogenated Decomposition Products per EN 50267-2, 15×D Minimum Bending Radius for Flexible Installation in Hazardous Equipment, Multi-Core Architecture with 2 to 64 Core Configurations, 0.5 mm² to 10 mm² Cross-Section Range per Core, Standardized SKU Portfolio (60+ Configurations), Optional Color-Numbered Cores per EN 50334, Engineered for Oil & Gas Drilling Platforms, Underground Coal & Metal Mining Operations, Chemical Processing Plants, Pharmaceutical Manufacturing Facilities, Food & Beverage Processing in Hazardous Zones, Petrochemical Refineries, Explosive Atmosphere Detection and Control Systems, and Classified Hazardous Area Electrical Distribution): Comprehensive Advanced Intrinsic Safety Control Cable Architecture Analysis Integrating Explosion-Proof Certification Chemistry, Hazardous Area Compliance Mechanisms, Intrinsic Safety Parameter Design, Class 5 Ultra-Flexible Conductor Mechanics, Water-Immersion Durability Engineering, Safety Barrier Circuit Integration Strategies, Class I Division 1/2 Equipment Wiring Specifications, ATEX II 2G Safety-Critical Cable Design, and Next-Generation Hazardous-Area-Compliant Electrical Distribution for Class I Division 1/2, ATEX II 2G, and Classified Explosive Atmosphere Equipment Requiring Intrinsically Safe Multi-Core Control Cable with Proven Hazardous-Area-Grade PVC Chemistry, Extreme Temperature Stability (−40 to +80°C), DIN EN 60079-14 Intrinsic Safety Certification, IEC 60811-402 Water-Immersion Durability, CEI 20-34/2-1 Oil-Resistance, and Seamless Integration into Hazard-Compliant Electrical Distribution Architectures

GAALFLEX® CONTROL H05BQ-F PUR: Professional-Grade Hand-Held Power Tool Cable with Ultra-Flexible 4×D Architecture and Comprehensive Job-Site Durability (300/500V Nominal Voltage, 2 kV Test Voltage per DIN VDE 0281, Designed Specifically for Hand-Held Electric Tools Including Drills, Impact Drivers, Angle Grinders, Circular Saws, and Other Portable Equipment Requiring Continuous Rotation and Aggressive Flexing, Ultra-Flexible 4×D Bending Radius Enabling 360° Continuous Rotation Without Insulation Fatigue or Conductor Breakage, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Rubber-Compound Insulation Optimized for Mechanical Durability and Electrical Safety, Orange (RAL 2003) PUR Outer Sheath Providing High-Visibility Tool Identification and Comprehensive Chemical, UV, and Abrasion Resistance, Abrasion Resistance Certification per HD 22.10.S1 and DIN VDE 0282 T10 Enabling Robust Job-Site Routing Through Rough Terrain, Construction Debris, and Pipe Clamp Integration Without Insulation Exposure, Suitable for Dry, Humid, and Wet Environments Enabling Deployment in Rainy Conditions and Damp Construction Sites, Outdoor Use Support Within Temperature Range (−40 to +90°C Both Fixed and Flexible) Enabling Year-Round Job-Site Operations, DIN VDE 0293-308 Color-Coded Cores (from 6 Cores) or EN 50334 Black Numbered Cores (2–5 Cores) Enabling Standard Wiring Without Reference Documentation, Green-Yellow Earth Protection Cores Available from 3-Core Configurations, Layered Stranding Architecture Optimizing Flexibility and Copper Density, Complete 2–7 Core Portfolio with 1 mm² Continuous Cross-Section Standardization Enabling Single Product Specification Across All Hand-Held Tool Applications, RoHS and CE Certified, Not Suitable for Underground Laying, Engineered for Construction Sites, Industrial Job Sites, Outdoor Temporary Installations, Professional Power Tool Operations, and Applications Where Continuous Rotation, Aggressive Flexing, Chemical Durability, and Comprehensive Job-Site Environmental Resistance Are Operational Requirements)

Technical Department

on07/05/2026

GAALFLEX® CONTROL H05BQ-F

GAALFLEX® CONTROL H05BQ-F PUR: Professional-Grade Hand-Held Power Tool Cable with Ultra-Flexible 4×D Architecture and Comprehensive Job-Site Durability (300/500V Nominal Voltage, 2 kV Test Voltage per DIN VDE 0281, Designed Specifically for Hand-Held Electric Tools Including Drills, Impact Drivers, Angle Grinders, Circular Saws, and Other Portable Equipment Requiring Continuous Rotation and Aggressive Flexing, Ultra-Flexible 4×D Bending Radius Enabling 360° Continuous Rotation Without Insulation Fatigue or Conductor Breakage, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Rubber-Compound Insulation Optimized for Mechanical Durability and Electrical Safety, Orange (RAL 2003) PUR Outer Sheath Providing High-Visibility Tool Identification and Comprehensive Chemical, UV, and Abrasion Resistance, Abrasion Resistance Certification per HD 22.10.S1 and DIN VDE 0282 T10 Enabling Robust Job-Site Routing Through Rough Terrain, Construction Debris, and Pipe Clamp Integration Without Insulation Exposure, Suitable for Dry, Humid, and Wet Environments Enabling Deployment in Rainy Conditions and Damp Construction Sites, Outdoor Use Support Within Temperature Range (−40 to +90°C Both Fixed and Flexible) Enabling Year-Round Job-Site Operations, DIN VDE 0293-308 Color-Coded Cores (from 6 Cores) or EN 50334 Black Numbered Cores (2–5 Cores) Enabling Standard Wiring Without Reference Documentation, Green-Yellow Earth Protection Cores Available from 3-Core Configurations, Layered Stranding Architecture Optimizing Flexibility and Copper Density, Complete 2–7 Core Portfolio with 1 mm² Continuous Cross-Section Standardization Enabling Single Product Specification Across All Hand-Held Tool Applications, RoHS and CE Certified, Not Suitable for Underground Laying, Engineered for Construction Sites, Industrial Job Sites, Outdoor Temporary Installations, Professional Power Tool Operations, and Applications Where Continuous Rotation, Aggressive Flexing, Chemical Durability, and Comprehensive Job-Site Environmental Resistance Are Operational Requirements)

GAALFLEX® CONTROL 540 CP PUR: Advanced Zero-Halogen Fire-Safe EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Renewable Energy VFD Integration and Critical Infrastructure Protection (Dual-Voltage System: 300/500 V from 0.75–1 mm², 450/750 V from 1–16 mm², Extreme Temperature Range −40 to +90°C Fixed Installation / −30 to +90°C Flexible Deployment, 3 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free TMPU Insulation per DIN VDE 0482 and IEC 60754-1, Yellow (RAL 1021) Halogen-Free Compound Inner Sheath with Tinned Copper Wire Braid Overall Screen Achieving ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Non-Woven Tape Protective Wrapping Between Screen and Inner Sheath, Yellow (RAL 1021) PUR Type TMPU Outer Sheath Delivering Superior Oil Resistance

Technical Department

on07/05/2026

GAALFLEX® CONTROL 540 CP

GAALFLEX® CONTROL 540 CP PUR: Advanced Zero-Halogen Fire-Safe EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Renewable Energy VFD Integration and Critical Infrastructure Protection (Dual-Voltage System: 300/500 V from 0.75–1 mm², 450/750 V from 1–16 mm², Extreme Temperature Range −40 to +90°C Fixed Installation / −30 to +90°C Flexible Deployment, 3 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free TMPU Insulation per DIN VDE 0482 and IEC 60754-1, Yellow (RAL 1021) Halogen-Free Compound Inner Sheath with Tinned Copper Wire Braid Overall Screen Achieving ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Non-Woven Tape Protective Wrapping Between Screen and Inner Sheath, Yellow (RAL 1021) PUR Type TMPU Outer Sheath Delivering Superior Oil Resistance

GAALFLEX® CONTROL 540 P PUR: Advanced Zero-Halogen Oil-Resistant Multi-Core Control Cable for High-Temperature and Extreme-Environment Applications (Dual-Voltage System: 300/500 V from 0.75–1 mm², 450/750 V from 1–16 mm², Extreme Temperature Range −40 to +90°C Fixed Installation / −15 to +90°C Flexible Deployment, 3 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free PVC Insulation per DIN VDE 0472 and IEC 60754-1, Yellow PUR Type TMPU Outer Sheath (RAL 1021) Delivering Superior Oil Resistance

Technical Department

on07/05/2026

GAALFLEX® CONTROL 540 P

GAALFLEX® CONTROL 540 P PUR: Advanced Zero-Halogen Oil-Resistant Multi-Core Control Cable for High-Temperature and Extreme-Environment Applications (Dual-Voltage System: 300/500 V from 0.75–1 mm², 450/750 V from 1–16 mm², Extreme Temperature Range −40 to +90°C Fixed Installation / −15 to +90°C Flexible Deployment, 3 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free PVC Insulation per DIN VDE 0472 and IEC 60754-1, Yellow PUR Type TMPU Outer Sheath (RAL 1021) Delivering Superior Oil Resistance

GAALFLEX® CONTROL 500 CP Lean: Advanced EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Harsh Industrial Environments (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PETP Foil Wrapping Plus Overall Tinned Copper Wire Braid Screen Providing ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Grey PUR Special Compound Outer Sheath (RAL 7001) Delivering Superior Oil Resistance

Technical Department

on07/05/2026

GAALFLEX® CONTROL 500 CP Lean

GAALFLEX® CONTROL 500 CP Lean: Advanced EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Harsh Industrial Environments (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PETP Foil Wrapping Plus Overall Tinned Copper Wire Braid Screen Providing ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Grey PUR Special Compound Outer Sheath (RAL 7001) Delivering Superior Oil Resistance

GAALFLEX® CONTROL 500 P Orange: Advanced Color-Identified Multi-Core Control Cable for Industrial Control Panel Wiring (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +70°C Fixed & Flexible Installation, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Orange PUR Type TMPU Polyurethane Outer Sheath (RAL 2003 Visibility Standard) Combined with DIN VDE 0293-308 HD 308 S2 Color-Coded Core Architecture (Red, Black, Yellow, Blue, White, Grey, Green-Yellow Earth) Enabling Instant Visual Conductor Identification Without Label Removal, Enhanced Flexibility 6×D Minimum Bending Radius Enabling Compact Control Panel Routing and Equipment Installation, PVC Type TI2 Core Insulation, Oil-Resistant PUR Compound, Flame-Retardant Self-Extinguishing per IEC 60332-1-2, Oil-Resistant per DIN VDE 0473 and IEC 60811-2-1, Abrasion & Notch-Resistant per DIN VDE 0250, RoHS and CE Certified, Multi-Core Architecture with 2 to 5 Core Configurations, 0.75 mm² to 2.5 mm² Cross-Section Range per Core, Standardized SKU Portfolio (20+ Configurations), Color-Coded Conductor Identification per DIN VDE 0293 Standard, Engineered for Control Panel Integration, Industrial Equipment Installation, Electrician-Friendly Maintenance Operations, Cable Routing in Compact Distribution Enclosures, Commissioning and Testing Harnesses, and Visible-Identification Electrical Distribution): Comprehensive Advanced Installation & Maintenance Cable Architecture Analysis Integrating Orange Visibility Outer Sheath Design, DIN VDE 0293 Color-Coding Molecular Identification System, Enhanced-Flexibility Cable Engineering, Installation-Optimized Bending-Radius Architecture, Electrician-Friendly Conductor Tracking, Control Panel Integration Design, Equipment Commissioning Specifications, Maintenance-Simplified Cable Routing, Compact Enclosure Distribution, and Next-Generation Color-Identified Electrical Distribution for Control Panel Installation, Industrial Equipment Wiring, Electrician-Optimized Maintenance, Commissioning Operations, and Visible-Identification Power Distribution Systems

Technical Department

on07/05/2026

GAALFLEX® CONTROL 500 P orange

GAALFLEX® CONTROL 500 P Orange: Advanced Color-Identified Multi-Core Control Cable for Industrial Control Panel Wiring (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +70°C Fixed & Flexible Installation, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Orange PUR Type TMPU Polyurethane Outer Sheath (RAL 2003 Visibility Standard) Combined with DIN VDE 0293-308 HD 308 S2 Color-Coded Core Architecture (Red, Black, Yellow, Blue, White, Grey, Green-Yellow Earth) Enabling Instant Visual Conductor Identification Without Label Removal, Enhanced Flexibility 6×D Minimum Bending Radius Enabling Compact Control Panel Routing and Equipment Installation, PVC Type TI2 Core Insulation, Oil-Resistant PUR Compound, Flame-Retardant Self-Extinguishing per IEC 60332-1-2, Oil-Resistant per DIN VDE 0473 and IEC 60811-2-1, Abrasion & Notch-Resistant per DIN VDE 0250, RoHS and CE Certified, Multi-Core Architecture with 2 to 5 Core Configurations, 0.75 mm² to 2.5 mm² Cross-Section Range per Core, Standardized SKU Portfolio (20+ Configurations), Color-Coded Conductor Identification per DIN VDE 0293 Standard, Engineered for Control Panel Integration, Industrial Equipment Installation, Electrician-Friendly Maintenance Operations, Cable Routing in Compact Distribution Enclosures, Commissioning and Testing Harnesses, and Visible-Identification Electrical Distribution): Comprehensive Advanced Installation & Maintenance Cable Architecture Analysis Integrating Orange Visibility Outer Sheath Design, DIN VDE 0293 Color-Coding Molecular Identification System, Enhanced-Flexibility Cable Engineering, Installation-Optimized Bending-Radius Architecture, Electrician-Friendly Conductor Tracking, Control Panel Integration Design, Equipment Commissioning Specifications, Maintenance-Simplified Cable Routing, Compact Enclosure Distribution, and Next-Generation Color-Identified Electrical Distribution for Control Panel Installation, Industrial Equipment Wiring, Electrician-Optimized Maintenance, Commissioning Operations, and Visible-Identification Power Distribution Systems

GAALFLEX® CONTROL 500 P PUR: Advanced Chemical & Oil-Resistant Multi-Core Control Cable for Industrial Machinery (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PUR Polyurethane Special Compound Outer Sheath Providing Superior Oil Resistance, Chemical Immunity, and Abrasion Protection, PVC Type TI2 Core Insulation, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2, Oil-Resistant per DIN VDE 0473 and IEC 60811-2-1, Chemical Resistance to Acids, Alkalis, Organic Solvents, Hydraulic Liquids, Diesel Fuel, and Industrial Cleaning Agents, Abrasion & Cut-Resistant Outer Surface per IEC Standard Mechanical Durability Tests, 4×D Minimum Bending Radius Fixed / 12.5×D Flexible Installation, Multi-Core Architecture with 2 to 25 Core Configurations, 0.75 mm² to 6 mm² Cross-Section Range per Core, Standardized SKU Portfolio (30+ Configurations), Color-Numbered Cores per EN 50334, Optional Notch-Resistant Engineering Available on Request, Engineered for Hydraulic System Control, Industrial Machinery Power Distribution, Chemical Processing Equipment, Automotive Engine Compartment Wiring, Mining Equipment Circuits, Food Processing Control Systems, and Chemical-Exposure-Prone Electrical Distribution): Comprehensive Advanced Chemical-Resistant Cable Architecture Analysis Integrating Polyurethane Compound Chemistry, Oil-Swelling Prevention Mechanisms, Chemical Resistance Molecular Design, Abrasion & Cut-Resistance Material Science, Mechanical Equipment Integration Architecture, Hydraulic System Wiring Specifications, Chemical Processing Equipment Harness Design, Automotive Thermal & Fluid Durability, Mining Extreme-Exposure Cable Engineering, and Next-Generation Chemical-Compliant Electrical Distribution for Industrial Machinery, Hydraulic Systems, Chemical Processing, and Extreme-Fluid-Exposure Manufacturing Environments

Technical Department

on07/05/2026

GAALFLEX® CONTROL 500 P

GAALFLEX® CONTROL 500 P PUR: Advanced Chemical & Oil-Resistant Multi-Core Control Cable for Industrial Machinery (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PUR Polyurethane Special Compound Outer Sheath Providing Superior Oil Resistance, Chemical Immunity, and Abrasion Protection, PVC Type TI2 Core Insulation, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2, Oil-Resistant per DIN VDE 0473 and IEC 60811-2-1, Chemical Resistance to Acids, Alkalis, Organic Solvents, Hydraulic Liquids, Diesel Fuel, and Industrial Cleaning Agents, Abrasion & Cut-Resistant Outer Surface per IEC Standard Mechanical Durability Tests, 4×D Minimum Bending Radius Fixed / 12.5×D Flexible Installation, Multi-Core Architecture with 2 to 25 Core Configurations, 0.75 mm² to 6 mm² Cross-Section Range per Core, Standardized SKU Portfolio (30+ Configurations), Color-Numbered Cores per EN 50334, Optional Notch-Resistant Engineering Available on Request, Engineered for Hydraulic System Control, Industrial Machinery Power Distribution, Chemical Processing Equipment, Automotive Engine Compartment Wiring, Mining Equipment Circuits, Food Processing Control Systems, and Chemical-Exposure-Prone Electrical Distribution): Comprehensive Advanced Chemical-Resistant Cable Architecture Analysis Integrating Polyurethane Compound Chemistry, Oil-Swelling Prevention Mechanisms, Chemical Resistance Molecular Design, Abrasion & Cut-Resistance Material Science, Mechanical Equipment Integration Architecture, Hydraulic System Wiring Specifications, Chemical Processing Equipment Harness Design, Automotive Thermal & Fluid Durability, Mining Extreme-Exposure Cable Engineering, and Next-Generation Chemical-Compliant Electrical Distribution for Industrial Machinery, Hydraulic Systems, Chemical Processing, and Extreme-Fluid-Exposure Manufacturing Environments

GAALFLEX® CONTROL 500 SY (TR): Advanced Mechanically-Protected Multi-Core Armored Control Cable for Construction Sites and Outdoor Power Distribution (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0482, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Overall Galvanized Steel Wire Braid Armouring for Mechanical Damage Protection and Rodent/Gnawing Immunity, Inner Protective PVC Type TM2 Sheath Separating Conductors from Armouring, Transparent PVC Type TM2 Outer Sheath Enabling Real-Time Cable Status Monitoring and Insulation Condition Assessment, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2 and DIN VDE 0482, Oil-Resistant per IEC 60811-2-1, Water-Resistant per IEC 60811-402, 6×D Minimum Bending Radius Fixed / 20×D Flexible Installation, Multi-Core Architecture with 2 to 61 Core Configurations, 0.5 mm² to 2.5 mm² Cross-Section Range per Core, Standardized SKU Portfolio (45+ Configurations), Color-Numbered Cores per EN 50334, Engineered for Construction Site Temporary Power Distribution, Underground Cable Burial and Trench Deployment, Outdoor Equipment and Machinery Wiring, Drag-Chain and High-Mechanical-Load Routing, Mining and Heavy-Industry Electrical Distribution, Rodent-Proof Cable Protection in Rural Electrification, and Harsh-Environment Mechanical-Damage-Prone Installations): Comprehensive Advanced Rugged Infrastructure Cable Architecture Analysis Integrating Galvanized Steel Wire Braid Mechanical Protection Design, Drag Tensile Strength Engineering, Crushing Resistance and Point-Load Durability, Transparent Status-Monitoring Outer Sheath Technology, Inner Protective Sheath Armouring Separation Strategy, Class 5 Ultra-Flexible Conductor Performance Under Mechanical Stress, Construction Site Temporary Power Integration, Underground Burial and Trench-Laying Specifications, Mining Equipment Power Distribution, Rodent-Resistant Cable Design, and Next-Generation Mechanically-Protected Electrical Distribution for Rugged Construction, Outdoor Infrastructure, Underground Deployment, and Extreme-Mechanical-Stress Industrial Applications

Technical Department

on07/05/2026

GAALFLEX® CONTROL 500 SY (TR)

GAALFLEX® CONTROL 500 SY (TR): Advanced Mechanically-Protected Multi-Core Armored Control Cable for Construction Sites and Outdoor Power Distribution (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0482, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Overall Galvanized Steel Wire Braid Armouring for Mechanical Damage Protection and Rodent/Gnawing Immunity, Inner Protective PVC Type TM2 Sheath Separating Conductors from Armouring, Transparent PVC Type TM2 Outer Sheath Enabling Real-Time Cable Status Monitoring and Insulation Condition Assessment, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2 and DIN VDE 0482, Oil-Resistant per IEC 60811-2-1, Water-Resistant per IEC 60811-402, 6×D Minimum Bending Radius Fixed / 20×D Flexible Installation, Multi-Core Architecture with 2 to 61 Core Configurations, 0.5 mm² to 2.5 mm² Cross-Section Range per Core, Standardized SKU Portfolio (45+ Configurations), Color-Numbered Cores per EN 50334, Engineered for Construction Site Temporary Power Distribution, Underground Cable Burial and Trench Deployment, Outdoor Equipment and Machinery Wiring, Drag-Chain and High-Mechanical-Load Routing, Mining and Heavy-Industry Electrical Distribution, Rodent-Proof Cable Protection in Rural Electrification, and Harsh-Environment Mechanical-Damage-Prone Installations): Comprehensive Advanced Rugged Infrastructure Cable Architecture Analysis Integrating Galvanized Steel Wire Braid Mechanical Protection Design, Drag Tensile Strength Engineering, Crushing Resistance and Point-Load Durability, Transparent Status-Monitoring Outer Sheath Technology, Inner Protective Sheath Armouring Separation Strategy, Class 5 Ultra-Flexible Conductor Performance Under Mechanical Stress, Construction Site Temporary Power Integration, Underground Burial and Trench-Laying Specifications, Mining Equipment Power Distribution, Rodent-Resistant Cable Design, and Next-Generation Mechanically-Protected Electrical Distribution for Rugged Construction, Outdoor Infrastructure, Underground Deployment, and Extreme-Mechanical-Stress Industrial Applications

GAALFLEX® CONTROL 501 CY (H05VVC4V5-K): Advanced European DIN VDE 0281-13 EMC-Shielded Flexible PVC Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +60°C Fixed Laying / +5 to +60°C Flexible Application, Tinned Copper Braid EMC Screen with Inner Sheath Architecture, EN 50334 Sequential Black-Numbered Core Identification with Green/Yellow Protective Earth from 3 Cores Onward, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Halogen-Free Outer Sheath PVC Type TM5, Layered Stranding with Oil-Resistant PVC Formulation, 8×D Flexible Application Bending Radius, 80+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–2.5 mm² Cross-Sections, DIN VDE 0281 Part 1 + HD 21.1 Compliance, Flame-Retardant per DIN VDE 0482 / IEC 60332-1-2, Oil-Resistant per IEC EN 60811-2-1, RoHS and CE Approved): Comprehensive Advanced EMC-Protected Flexible Industrial Control Cable Architecture Analysis Integrating Tinned Copper Braid Shielding, Electromagnetic Interference Suppression Engineering, Inner Sheath EMC Isolation, Numbered Core Identification, Flexible Installation Design, Oil-Resistant PVC Formulation, VFD/Servo System Protection, Industrial Noise Environment Mitigation, and Next-Generation EMC-Protected European Flexible Control Electrical Distribution

Technical Department

on30/04/2026

Type H05VVC4V5-K GAALFLEX® CONTROL 501 CY

GAALFLEX® CONTROL 501 CY (H05VVC4V5-K): Advanced European DIN VDE 0281-13 EMC-Shielded Flexible PVC Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +60°C Fixed Laying / +5 to +60°C Flexible Application, Tinned Copper Braid EMC Screen with Inner Sheath Architecture, EN 50334 Sequential Black-Numbered Core Identification with Green/Yellow Protective Earth from 3 Cores Onward, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Halogen-Free Outer Sheath PVC Type TM5, Layered Stranding with Oil-Resistant PVC Formulation, 8×D Flexible Application Bending Radius, 80+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–2.5 mm² Cross-Sections, DIN VDE 0281 Part 1 + HD 21.1 Compliance, Flame-Retardant per DIN VDE 0482 / IEC 60332-1-2, Oil-Resistant per IEC EN 60811-2-1, RoHS and CE Approved): Comprehensive Advanced EMC-Protected Flexible Industrial Control Cable Architecture Analysis Integrating Tinned Copper Braid Shielding, Electromagnetic Interference Suppression Engineering, Inner Sheath EMC Isolation, Numbered Core Identification, Flexible Installation Design, Oil-Resistant PVC Formulation, VFD/Servo System Protection, Industrial Noise Environment Mitigation, and Next-Generation EMC-Protected European Flexible Control Electrical Distribution

GAALFLEX® CONTROL 501 (H05VV5-F): Advanced European DIN VDE 0281-13 Flexible PVC Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +60°C Fixed Laying / +5 to +60°C Flexible Application, Eca Fire Classification per IEC 60332-1-2, PVC Type TI2 Insulation and PVC Type TM5 Outer Sheath, EN 50334 Sequential Black-Numbered Core Identification with Green/Yellow Protective Earth from 3 Cores Onward, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Standard Outer Sheath, Layered Stranding Architecture with Oil-Resistant PVC Formulation, 4×D Fixed Laying / 6×D Flexible Application Bending Radius, 100+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–2.5 mm² Cross-Sections, DIN VDE 0281 Part 1 + HD 21.1 Compliance, Flame-Retardant per DIN VDE 0482 / IEC 60332-1-2, Oil-Resistant per IEC EN 60811-2-1, RoHS and CE Approved): Comprehensive Advanced Flexible Indoor European Control Cable Architecture Analysis Integrating Numbered Core Identification, Flexible Installation Engineering, Extensive Multi-Core Portfolio, Compact Bending-Radius Design, Fire-Safety Compliance, Oil-Resistant PVC Formulation, Building Electrical System Integration, Industrial Control Panel Specification, and Next-Generation European Flexible Control Electrical Distribution

Technical Department

on30/04/2026

Type H05VV5-F GAALFLEX® CONTROL 501

GAALFLEX® CONTROL 501 (H05VV5-F): Advanced European DIN VDE 0281-13 Flexible PVC Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +60°C Fixed Laying / +5 to +60°C Flexible Application, Eca Fire Classification per IEC 60332-1-2, PVC Type TI2 Insulation and PVC Type TM5 Outer Sheath, EN 50334 Sequential Black-Numbered Core Identification with Green/Yellow Protective Earth from 3 Cores Onward, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Standard Outer Sheath, Layered Stranding Architecture with Oil-Resistant PVC Formulation, 4×D Fixed Laying / 6×D Flexible Application Bending Radius, 100+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–2.5 mm² Cross-Sections, DIN VDE 0281 Part 1 + HD 21.1 Compliance, Flame-Retardant per DIN VDE 0482 / IEC 60332-1-2, Oil-Resistant per IEC EN 60811-2-1, RoHS and CE Approved): Comprehensive Advanced Flexible Indoor European Control Cable Architecture Analysis Integrating Numbered Core Identification, Flexible Installation Engineering, Extensive Multi-Core Portfolio, Compact Bending-Radius Design, Fire-Safety Compliance, Oil-Resistant PVC Formulation, Building Electrical System Integration, Industrial Control Panel Specification, and Next-Generation European Flexible Control Electrical Distribution

GAALFLEX® CONTROL 500 BH: Advanced European CPR EN 50575 Eca Radiation-Resistant Halogen-Free DIN VDE Color-Coded Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +70°C Fixed Laying / −5 to +70°C Flexible Application, Radiation Resistance 8×10⁷ cJ/kg Ionizing Radiation Durability, Eca Fire Classification per EN 13501-6, Halogen-Free Type TI6/TM7 Insulation and Sheath Formulation with Complete Halogenated-Compound Elimination, DIN VDE 0293-308 / HD 308 S2 / JB/OB Standard Color Identification, IEC 60332-2-1 Single-Cable Flame-Spread Testing, IEC 60332-3-24 Cable-Bundle Flame-Spread Testing, IEC 60754-1 Zero-Halogen Compliance, IEC 60754-2 Zero-Corrosive-Gas Emissions, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Halogen-Free Outer Sheath, DIN VDE Color-Coded Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Architecture with Radiation-Stabilized Polymer Formulation, 4×D Fixed Laying / 12.5×D Flexible Application Bending Radius, 50+ Standardized SKU Configurations Spanning 2–5 Conductor Cores at 0.5–120 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced Nuclear & Medical Radiation-Resistant Control Cable Architecture Analysis Integrating Ionizing-Radiation Polymer Stabilization, Halogenated-Compound Elimination, Fire-Safety Multi-Standard Compliance, Zero-Corrosive-Gas Life-Safety Engineering, DIN VDE Professional Color Identification, Radiation-Hardened Electrical Distribution, Nuclear Facility Instrumentation Protection, Medical Radiation Area Safety Integration, Research Reactor Applications, and Next-Generation Radiation-Resistant European Safety-Critical Electrical Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL 500 BH

GAALFLEX® CONTROL 500 BH: Advanced European CPR EN 50575 Eca Radiation-Resistant Halogen-Free DIN VDE Color-Coded Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +70°C Fixed Laying / −5 to +70°C Flexible Application, Radiation Resistance 8×10⁷ cJ/kg Ionizing Radiation Durability, Eca Fire Classification per EN 13501-6, Halogen-Free Type TI6/TM7 Insulation and Sheath Formulation with Complete Halogenated-Compound Elimination, DIN VDE 0293-308 / HD 308 S2 / JB/OB Standard Color Identification, IEC 60332-2-1 Single-Cable Flame-Spread Testing, IEC 60332-3-24 Cable-Bundle Flame-Spread Testing, IEC 60754-1 Zero-Halogen Compliance, IEC 60754-2 Zero-Corrosive-Gas Emissions, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Halogen-Free Outer Sheath, DIN VDE Color-Coded Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Architecture with Radiation-Stabilized Polymer Formulation, 4×D Fixed Laying / 12.5×D Flexible Application Bending Radius, 50+ Standardized SKU Configurations Spanning 2–5 Conductor Cores at 0.5–120 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced Nuclear & Medical Radiation-Resistant Control Cable Architecture Analysis Integrating Ionizing-Radiation Polymer Stabilization, Halogenated-Compound Elimination, Fire-Safety Multi-Standard Compliance, Zero-Corrosive-Gas Life-Safety Engineering, DIN VDE Professional Color Identification, Radiation-Hardened Electrical Distribution, Nuclear Facility Instrumentation Protection, Medical Radiation Area Safety Integration, Research Reactor Applications, and Next-Generation Radiation-Resistant European Safety-Critical Electrical Distribution

GAALFLEX® CONTROL 500 B: Advanced European CPR EN 50575 Eca DIN VDE Color-Coded Multi-Conductor Control Cable System (300/500 V Nominal, 4 kV Dielectric Proof, −40 to +80°C Fixed Laying / −15 to +80°C Flexible Application, Eca Fire Classification per EN 13501-6, DIN VDE 0293-308 / HD 308 S2 / JB/OB Standard Color Identification with Green/Yellow Earth from 3 Cores Onward, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Special PVC Compound Insulation and Grey RAL 7001 Outer Sheath, Layered Stranding Architecture, 4×D Fixed Laying / 15×D Flexible Application Bending Radius, Oil-Resistant per DIN VDE 0473 / IEC EN 60811, 40+ Standardized SKU Configurations Spanning 2–7 Conductor Cores at 0.5–50 mm² Cross-Sections, Black Outer Sheath Option Available, Small Bending Radius and Flexible Conductor On Request, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Standard Building & Industrial Control Cable Architecture Analysis Integrating DIN VDE Standard Color Identification, Special PVC Compound Oil Resistance, Multi-Conductor Layered Stranding Engineering, Eca Fire-Reaction Compliance, Building Electrical System Integration, Industrial Control Panel Specification, and Next-Generation European Standard Electrical Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL 500 B

GAALFLEX® CONTROL 500 B: Advanced European CPR EN 50575 Eca DIN VDE Color-Coded Multi-Conductor Control Cable System (300/500 V Nominal, 4 kV Dielectric Proof, −40 to +80°C Fixed Laying / −15 to +80°C Flexible Application, Eca Fire Classification per EN 13501-6, DIN VDE 0293-308 / HD 308 S2 / JB/OB Standard Color Identification with Green/Yellow Earth from 3 Cores Onward, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Special PVC Compound Insulation and Grey RAL 7001 Outer Sheath, Layered Stranding Architecture, 4×D Fixed Laying / 15×D Flexible Application Bending Radius, Oil-Resistant per DIN VDE 0473 / IEC EN 60811, 40+ Standardized SKU Configurations Spanning 2–7 Conductor Cores at 0.5–50 mm² Cross-Sections, Black Outer Sheath Option Available, Small Bending Radius and Flexible Conductor On Request, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Standard Building & Industrial Control Cable Architecture Analysis Integrating DIN VDE Standard Color Identification, Special PVC Compound Oil Resistance, Multi-Conductor Layered Stranding Engineering, Eca Fire-Reaction Compliance, Building Electrical System Integration, Industrial Control Panel Specification, and Next-Generation European Standard Electrical Distribution

GAALFLEX® CONTROL 500 H: Advanced European CPR EN 50575 Eca Halogen-Free Multi-Conductor Control Cable System (300/500 V Nominal, 3 kV Dielectric Proof, −40 to +70°C Fixed Laying / −15 to +70°C Flexible Application, Eca Fire Classification per EN 13501-6, Halogen-Free Type TI6/TM7 Insulation and Sheath Formulation with Zero-Halogenated-Compound Architecture, IEC 60332-2-1 Single-Cable Flame-Spread Testing, IEC 60332-3-24/3-25 Cable-Bundle Flame-Spread Testing, IEC 60754-1 Zero-Halogen Compliance, IEC 60754-2 Zero-Corrosive-Gas Emissions (HCl Suppression), IEC 61034-1-2 Low-Smoke-Density Specification, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Architecture, 4×D Fixed Laying / 15×D Flexible Application Bending Radius, 80+ Standardized SKU Configurations Spanning 2–41 Conductor Cores at 0.5–50 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Building & Fire-Safe Control Cable Architecture Analysis Integrating Halogenated-Compound Elimination, Zero-Corrosive-Gas Polymer Chemistry, Multi-Standard Flame-Spread Engineering, Low-Smoke Decomposition Mitigation, European Building Electrical Safety Integration, Enclosed-Space Life-Safety Optimization, and Next-Generation Fire-Safe European Electrical Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL 500 CH Lean

GAALFLEX® CONTROL 500 H: Advanced European CPR EN 50575 Eca Halogen-Free Multi-Conductor Control Cable System (300/500 V Nominal, 3 kV Dielectric Proof, −40 to +70°C Fixed Laying / −15 to +70°C Flexible Application, Eca Fire Classification per EN 13501-6, Halogen-Free Type TI6/TM7 Insulation and Sheath Formulation with Zero-Halogenated-Compound Architecture, IEC 60332-2-1 Single-Cable Flame-Spread Testing, IEC 60332-3-24/3-25 Cable-Bundle Flame-Spread Testing, IEC 60754-1 Zero-Halogen Compliance, IEC 60754-2 Zero-Corrosive-Gas Emissions (HCl Suppression), IEC 61034-1-2 Low-Smoke-Density Specification, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Architecture, 4×D Fixed Laying / 15×D Flexible Application Bending Radius, 80+ Standardized SKU Configurations Spanning 2–41 Conductor Cores at 0.5–50 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Building & Fire-Safe Control Cable Architecture Analysis Integrating Halogenated-Compound Elimination, Zero-Corrosive-Gas Polymer Chemistry, Multi-Standard Flame-Spread Engineering, Low-Smoke Decomposition Mitigation, European Building Electrical Safety Integration, Enclosed-Space Life-Safety Optimization, and Next-Generation Fire-Safe European Electrical Distribution

GAALFLEX® CONTROL 500 CY Lean: Advanced European CPR EN 50575 Eca EMC-Shielded Multi-Conductor Control Cable System (300/500 V Nominal, 3 kV Dielectric Proof per DIN VDE 0281/HD 21.1, −40 to +80°C Fixed Laying / −5 to +70°C Flexible Application, Eca Fire Classification per EN 13501-6, Integrated Tinned Copper Braid Screen with PETP Foil Wrapping for Superior Electromagnetic Compatibility, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, PVC Type TI1 Insulation, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding with Integrated Shielding, Dual Bending-Radius Specification: 6×D Fixed Laying / 20×D Flexible Application, Oil-Resistant per DIN EN 50290-2-22 / VDE 0819-102 TM54, 50+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–4.0 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Industrial EMC-Control Cable Architecture Analysis Integrating Tinned Copper Braid Screening Technology, PETP Foil Electromagnetic Shielding, VFD and Servo-Motor Interference Suppression, Industrial Control System EMC Requirements, EN 50575 Low-Smoke Chemistry, Eca Fire-Reaction Compliance, Multi-Conductor Shielded Stranding Engineering, Oil-Resistant PVC Formulation, and Next-Generation EMC-Critical Industrial Control Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL 500 CY Lean

GAALFLEX® CONTROL 500 CY Lean: Advanced European CPR EN 50575 Eca EMC-Shielded Multi-Conductor Control Cable System (300/500 V Nominal, 3 kV Dielectric Proof per DIN VDE 0281/HD 21.1, −40 to +80°C Fixed Laying / −5 to +70°C Flexible Application, Eca Fire Classification per EN 13501-6, Integrated Tinned Copper Braid Screen with PETP Foil Wrapping for Superior Electromagnetic Compatibility, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, PVC Type TI1 Insulation, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding with Integrated Shielding, Dual Bending-Radius Specification: 6×D Fixed Laying / 20×D Flexible Application, Oil-Resistant per DIN EN 50290-2-22 / VDE 0819-102 TM54, 50+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–4.0 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Industrial EMC-Control Cable Architecture Analysis Integrating Tinned Copper Braid Screening Technology, PETP Foil Electromagnetic Shielding, VFD and Servo-Motor Interference Suppression, Industrial Control System EMC Requirements, EN 50575 Low-Smoke Chemistry, Eca Fire-Reaction Compliance, Multi-Conductor Shielded Stranding Engineering, Oil-Resistant PVC Formulation, and Next-Generation EMC-Critical Industrial Control Distribution

GAALFLEX® CONTROL 500: Advanced European CPR EN 50575 Eca Multi-Conductor Control Cable System (300/500 V Nominal, 4 kV Dielectric Proof per EN 50575:2014 + A1:2016, −40 to +80°C Fixed Laying / −15 to +80°C Flexible Application, Eca Fire Classification per EN 13501-6 (Lowest European Fire-Reaction Rating), Low-Smoke and Low-Corrosive-Gas PVC Formulation, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Special PVC Insulation, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Geometry with Non-Woven Synthetic Wrapper, 4×D Minimum Bending Radius for Compact Panel and Duct Routing, 50+ Standardized SKU Configurations Spanning 2–80 Conductor Cores at 0.5–50 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved, On-Request Small Bending Radius, Flexible Conductor Option): Comprehensive Advanced European Building & Industrial Control Cable Architecture Analysis Integrating European Fire Safety Regulation (CPR UE 305/11), EN 50575 Low-Smoke Elastomer Chemistry, Eca Classification Fire-Reaction Mechanics, Multi-Conductor Layered Stranding Engineering, EN 50334 Conductor Identification Topology, Building Electrical Safety Integration, Industrial Control Panel Specification, Enclosed-Space Fire-Hazard Mitigation, and Next-Generation European Safety-Critical Electrical Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL 500

GAALFLEX® CONTROL 500: Advanced European CPR EN 50575 Eca Multi-Conductor Control Cable System (300/500 V Nominal, 4 kV Dielectric Proof per EN 50575:2014 + A1:2016, −40 to +80°C Fixed Laying / −15 to +80°C Flexible Application, Eca Fire Classification per EN 13501-6 (Lowest European Fire-Reaction Rating), Low-Smoke and Low-Corrosive-Gas PVC Formulation, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Special PVC Insulation, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Geometry with Non-Woven Synthetic Wrapper, 4×D Minimum Bending Radius for Compact Panel and Duct Routing, 50+ Standardized SKU Configurations Spanning 2–80 Conductor Cores at 0.5–50 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved, On-Request Small Bending Radius, Flexible Conductor Option): Comprehensive Advanced European Building & Industrial Control Cable Architecture Analysis Integrating European Fire Safety Regulation (CPR UE 305/11), EN 50575 Low-Smoke Elastomer Chemistry, Eca Classification Fire-Reaction Mechanics, Multi-Conductor Layered Stranding Engineering, EN 50334 Conductor Identification Topology, Building Electrical Safety Integration, Industrial Control Panel Specification, Enclosed-Space Fire-Hazard Mitigation, and Next-Generation European Safety-Critical Electrical Distribution

GAALFLEX® CONTROL H05V2-K/MTW/TEW / H07V2-K/MTW/TEW: Advanced Machine Tool Wire and Equipment-Integrated Cable System (H05V2-K/MTW/TEW: 300/500 V DIN VDE / 600 V UL/CSA, H07V2-K/MTW/TEW: 450/750 V DIN VDE / 600 V UL/CSA, 2.5 kV Test Voltage, −40 to +90°C Fixed Laying / −5 to +90°C Flexible Application (DIN VDE), +105°C Continuous Operation (UL/CSA), MTW 1063 Machine Tool Wire per NFPA 70, CSA Type TEW Thermoplastic Equipment Wire 105°C, Class 5 Flexible Tinned Copper Conductor per IEC 60228 / DIN VDE 0295, PVC Type TI3 Outer Sheath with Enhanced Vibration Resistance, Dual Bending-Radius Specification: 5×D Fixed Laying (Equipment Frame Mounting) / 10×D Flexible Application (Festoon and Drag-Chain Systems), Triple UL/CSA Certification (MTW 1063 + CSA TEW + AWM Style 1015), Flame Retardant per DIN VDE 0482 / EN 50265-2-1 / IEC 60332-1-2 / UL 1581, NFPA 79 2018 Edition Electrical Safety Compliance, Green/Yellow Protective Earth per NFPA 79, Single-Conductor Architecture with 0.23 mm² to 120 mm² Cross-Section Range, 14+ Standardized SKU Configurations, Optional Flexible Conductor On Request, Harmonized per European Standards, RoHS and CE Certification): Comprehensive Advanced Industrial Machinery & Equipment Cable Architecture Analysis Integrating PVC Vibration-Resistant Polymer Chemistry, MTW Machine Tool Wire Specification, CSA Equipment Wire Certification, Dual Bending-Radius Mechanical Engineering, NFPA 70 and NFPA 79 Electrical Safety Architecture, CNC and Automated Equipment Integration, Vibration-Damping Cable Design, and Next-Generation Machine-Mounted Equipment Wiring

Technical Department

on30/04/2026

GAALFLEX® CONTROL H05V2-K/MTW/TEW & H07V2-K/MTW/TEW

GAALFLEX® CONTROL H05V2-K/MTW/TEW / H07V2-K/MTW/TEW: Advanced Machine Tool Wire and Equipment-Integrated Cable System (H05V2-K/MTW/TEW: 300/500 V DIN VDE / 600 V UL/CSA, H07V2-K/MTW/TEW: 450/750 V DIN VDE / 600 V UL/CSA, 2.5 kV Test Voltage, −40 to +90°C Fixed Laying / −5 to +90°C Flexible Application (DIN VDE), +105°C Continuous Operation (UL/CSA), MTW 1063 Machine Tool Wire per NFPA 70, CSA Type TEW Thermoplastic Equipment Wire 105°C, Class 5 Flexible Tinned Copper Conductor per IEC 60228 / DIN VDE 0295, PVC Type TI3 Outer Sheath with Enhanced Vibration Resistance, Dual Bending-Radius Specification: 5×D Fixed Laying (Equipment Frame Mounting) / 10×D Flexible Application (Festoon and Drag-Chain Systems), Triple UL/CSA Certification (MTW 1063 + CSA TEW + AWM Style 1015), Flame Retardant per DIN VDE 0482 / EN 50265-2-1 / IEC 60332-1-2 / UL 1581, NFPA 79 2018 Edition Electrical Safety Compliance, Green/Yellow Protective Earth per NFPA 79, Single-Conductor Architecture with 0.23 mm² to 120 mm² Cross-Section Range, 14+ Standardized SKU Configurations, Optional Flexible Conductor On Request, Harmonized per European Standards, RoHS and CE Certification): Comprehensive Advanced Industrial Machinery & Equipment Cable Architecture Analysis Integrating PVC Vibration-Resistant Polymer Chemistry, MTW Machine Tool Wire Specification, CSA Equipment Wire Certification, Dual Bending-Radius Mechanical Engineering, NFPA 70 and NFPA 79 Electrical Safety Architecture, CNC and Automated Equipment Integration, Vibration-Damping Cable Design, and Next-Generation Machine-Mounted Equipment Wiring

GAALFLEX® CONTROL H05V2-K / H07V2-K: Advanced UL/CSA-Certified PVC Single-Conductor Industrial Control Cable (H05V2-K: 300/500 V DIN VDE / 600 V UL/CSA, H07V2-K: 450/750 V DIN VDE / 600 V UL/CSA, 2.5 kV Test Voltage per DIN VDE 0281 part 2, −20 to +90°C Fixed Laying / −5 to +90°C Flexible Application (DIN VDE), up to +105°C (UL/CSA Continuous Operation and Transient Short-Circuit Events), Class 5 Flexible Tinned Copper Conductor per IEC 60228 and DIN VDE 0295, PVC Type TI3 Black Outer Sheath (RAL 9005 Equivalent), AWM Style 1015 (105°C / 600 V), AWM Style 1569 (105°C / 300 V), AWM Style 1007 (80°C / 300 V), CSA Type TEW (105°C / 600 V and 80°C / 300 V variants), Dual-Standard Certification: DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 (European Harmonization) Plus UL 1581 UL VW-1 / CSA FT1 (North American UL/CSA Compliance), Flame Retardant and Self-Extinguishing, 4×D Minimum Bending Radius for Compact Panel Routing (Smallest Footprint in Class), NFPA 79 2018 Edition Compatibility for Electrical Safety and Color Coding, Green/Yellow Protective Earth per NFPA 79, Single-Core Architecture with 0.5 mm² to 120 mm² Cross-Section Range, 15+ Standardized SKU Configurations, Optional Flexible Conductor On Request, Harmonized per European Standards, RoHS and CE Certification with Optional CSA/UL On Request): Comprehensive Advanced North American Industrial Control & Renewable Energy Cable Architecture Analysis Integrating PVC Polymer Chemistry, Tinned Copper Conductor Metallurgy, UL/CSA Certification Pathways, Compact Bending-Radius Engineering, NFPA 79 Electrical Safety Architecture, North American Renewable Energy Integration, AWM Style Standardization, Industrial Control Panel Specification, and Next-Generation Dual-Standard (European + North American) Electrical Distribution

Technical Department

on30/04/2026

GAALFLEX® CONTROL-H05V2-K & H07V2-K

GAALFLEX® CONTROL H05V2-K / H07V2-K: Advanced UL/CSA-Certified PVC Single-Conductor Industrial Control Cable (H05V2-K: 300/500 V DIN VDE / 600 V UL/CSA, H07V2-K: 450/750 V DIN VDE / 600 V UL/CSA, 2.5 kV Test Voltage per DIN VDE 0281 part 2, −20 to +90°C Fixed Laying / −5 to +90°C Flexible Application (DIN VDE), up to +105°C (UL/CSA Continuous Operation and Transient Short-Circuit Events), Class 5 Flexible Tinned Copper Conductor per IEC 60228 and DIN VDE 0295, PVC Type TI3 Black Outer Sheath (RAL 9005 Equivalent), AWM Style 1015 (105°C / 600 V), AWM Style 1569 (105°C / 300 V), AWM Style 1007 (80°C / 300 V), CSA Type TEW (105°C / 600 V and 80°C / 300 V variants), Dual-Standard Certification: DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 (European Harmonization) Plus UL 1581 UL VW-1 / CSA FT1 (North American UL/CSA Compliance), Flame Retardant and Self-Extinguishing, 4×D Minimum Bending Radius for Compact Panel Routing (Smallest Footprint in Class), NFPA 79 2018 Edition Compatibility for Electrical Safety and Color Coding, Green/Yellow Protective Earth per NFPA 79, Single-Core Architecture with 0.5 mm² to 120 mm² Cross-Section Range, 15+ Standardized SKU Configurations, Optional Flexible Conductor On Request, Harmonized per European Standards, RoHS and CE Certification with Optional CSA/UL On Request): Comprehensive Advanced North American Industrial Control & Renewable Energy Cable Architecture Analysis Integrating PVC Polymer Chemistry, Tinned Copper Conductor Metallurgy, UL/CSA Certification Pathways, Compact Bending-Radius Engineering, NFPA 79 Electrical Safety Architecture, North American Renewable Energy Integration, AWM Style Standardization, Industrial Control Panel Specification, and Next-Generation Dual-Standard (European + North American) Electrical Distribution

GAALFLEX® CONTROL H05Z-K / H07Z-K: Advanced Halogen-Free XLPO Single-Conductor Industrial Control Cable (H05Z-K: 300/500 V Nominal, H07Z-K: 450/750 V Nominal, 2 kV / 2.5 kV Test Voltage per DIN VDE 0281 part 2 and HD 21.2, −40 to +90°C Bidirectional Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper Conductor per IEC 60228 and DIN VDE 0295, XLPO Type EI5 Cross-Linked Polyolefin Outer Sheath with Black RAL 9005 Coloration, Zero Halogenated Decomposition Products per DIN VDE 0482 part 267-2 / EN 50267-2-1 / IEC 60754-1, Flame Retardant and Self-Extinguishing per DIN VDE 0482 part 332-1-2 / IEC 60332-1-2, Low Optical Smoke Density per IEC 61034-1-2, Harmonized per DIN VDE 0282-9, RoHS and CE Certified, 8×D Minimum Bending Radius for Compact Routing, Single-Core Architecture with 0.5 mm² to 240 mm² Cross-Section Range, 15+ Standardized SKU Configurations, Optional Color Variants Available, Engineered for Industrial Control Panels, PLC/SCADA Wiring, Renewable Energy DC Distribution, Marine Electrical Systems, Aerospace Equipment, Safety-Critical Machinery Control, and Zero-Halogen Fire-Safety-Mandated Environments): Comprehensive Advanced Industrial Control & Renewable Energy Cable Architecture Analysis Integrating Cross-Linked Polyolefin Polymer Chemistry, Halogenation-Free Flame Retardancy Mechanics, Zero-Smoke Thermal Decomposition Engineering, Thermal Stability & UV Resistance, Class 5 Ultra-Flexible Conductor Mechanics, Industrial Control Panel Integration, Renewable Energy DC Bus Routing, Marine Safety-Critical Cable Specification, Aerospace Harness Architecture, and Next-Generation Fire-Safety-Compliant Electrical Distribution for Zero-Halogen Mandated Environments

Technical Department

on30/04/2026

GAALFLEX® CONTROL H05Z-K & H07Z-K

GAALFLEX® CONTROL H05Z-K / H07Z-K: Advanced Halogen-Free XLPO Single-Conductor Industrial Control Cable (H05Z-K: 300/500 V Nominal, H07Z-K: 450/750 V Nominal, 2 kV / 2.5 kV Test Voltage per DIN VDE 0281 part 2 and HD 21.2, −40 to +90°C Bidirectional Extreme Temperature Envelope, Class 5 Flexible Red Bare Copper Conductor per IEC 60228 and DIN VDE 0295, XLPO Type EI5 Cross-Linked Polyolefin Outer Sheath with Black RAL 9005 Coloration, Zero Halogenated Decomposition Products per DIN VDE 0482 part 267-2 / EN 50267-2-1 / IEC 60754-1, Flame Retardant and Self-Extinguishing per DIN VDE 0482 part 332-1-2 / IEC 60332-1-2, Low Optical Smoke Density per IEC 61034-1-2, Harmonized per DIN VDE 0282-9, RoHS and CE Certified, 8×D Minimum Bending Radius for Compact Routing, Single-Core Architecture with 0.5 mm² to 240 mm² Cross-Section Range, 15+ Standardized SKU Configurations, Optional Color Variants Available, Engineered for Industrial Control Panels, PLC/SCADA Wiring, Renewable Energy DC Distribution, Marine Electrical Systems, Aerospace Equipment, Safety-Critical Machinery Control, and Zero-Halogen Fire-Safety-Mandated Environments): Comprehensive Advanced Industrial Control & Renewable Energy Cable Architecture Analysis Integrating Cross-Linked Polyolefin Polymer Chemistry, Halogenation-Free Flame Retardancy Mechanics, Zero-Smoke Thermal Decomposition Engineering, Thermal Stability & UV Resistance, Class 5 Ultra-Flexible Conductor Mechanics, Industrial Control Panel Integration, Renewable Energy DC Bus Routing, Marine Safety-Critical Cable Specification, Aerospace Harness Architecture, and Next-Generation Fire-Safety-Compliant Electrical Distribution for Zero-Halogen Mandated Environments

Feichun BASKET SPREADER 740 (YSLTOE): Advanced Salt-Spray-Resistant Port Crane Control Cable for Hoisting Cages and Spreader Festoon Systems (300/500 V Nominal, 310/550 V Maximum AC, 410/825 V Maximum DC, 2 kV Test Voltage, −20 to +60°C Bidirectional Temperature Envelope for Both Fixed Laying and Flexible Application, +70°C Continuous Conductor Operating Temperature, +150°C Short-Circuit Conductor Limit, Proprietary Aramide Yarn Central Unit Reinforced with Embedded Lead Core for Combined Tensile Anchor and Vibration-Damping Mass Distribution, Polyurethane Outer Sheath PUR Type 11YM1 with Black RAL 9005-Equivalent Coloration Engineered for Superior Hydrolysis Resistance and Salt-Mist Corrosion Suppression, PVC Type YI2 Core Insulation, Class 6 Ultra-Flexible Bare Red Copper Conductor per IEC 60228 and DIN VDE 0295, EN 50334-Compliant Black Cores with Sequential Numbering Plus Green/Yellow Protective Earth, Bundle-Plus-Central-Unit Stranding Geometry with Non-Woven Tape Wrapping per Bundle and Overall, 50-Meter Continuous Vertical Suspension Capability, 160 m/min Maximum Operational Speed for Crane Festoon and Hoisting Cage Applications, ±25°/m Torsion Resistan

Technical Department

on30/04/2026

BASKET SPREADER 740 (YSLTOE)

Feichun BASKET SPREADER 740 (YSLTOE): Advanced Salt-Spray-Resistant Port Crane Control Cable for Hoisting Cages and Spreader Festoon Systems (300/500 V Nominal, 310/550 V Maximum AC, 410/825 V Maximum DC, 2 kV Test Voltage, −20 to +60°C Bidirectional Temperature Envelope for Both Fixed Laying and Flexible Application, +70°C Continuous Conductor Operating Temperature, +150°C Short-Circuit Conductor Limit, Proprietary Aramide Yarn Central Unit Reinforced with Embedded Lead Core for Combined Tensile Anchor and Vibration-Damping Mass Distribution, Polyurethane Outer Sheath PUR Type 11YM1 with Black RAL 9005-Equivalent Coloration Engineered for Superior Hydrolysis Resistance and Salt-Mist Corrosion Suppression, PVC Type YI2 Core Insulation, Class 6 Ultra-Flexible Bare Red Copper Conductor per IEC 60228 and DIN VDE 0295, EN 50334-Compliant Black Cores with Sequential Numbering Plus Green/Yellow Protective Earth, Bundle-Plus-Central-Unit Stranding Geometry with Non-Woven Tape Wrapping per Bundle and Overall, 50-Meter Continuous Vertical Suspension Capability, 160 m/min Maximum Operational Speed for Crane Festoon and Hoisting Cage Applications, ±25°/m Torsion Resistan

Feichun GAALFLEX® CONTROL H05V-K/H07V-K: European Harmonized Industrial Control Cable (H05V-K 300/500 V & H07V-K 450/750 V, Single-Conductor PVC Insulation Type TI1, Class 5 Flexible Red Copper Conductor per IEC 60228, −10 to +70°C Temperature Range Fixed Laying & Portable Installation, Variable Bending Radius Design (3–4×D Depending on Conductor Size), Flame-Retardant & Self-Extinguishing per IEC 60332-1-2, RoHS & CE Certification, Harmonized European Standards Compliance (EN 50525-2-31, CEI 20-107, IEC 60811, BS 6004), Cost-Effective Standard Cable for Non-Specialized Industrial Applications, Comprehensive 18+ SKU Portfolio (H05V-K: 0.5–1 mm², H07V-K: 1.5–240 mm²) Covering Entry-Level Control Circuits Through High-Capacity Industrial Feeders): Comprehensive European Standards Analysis & General Industrial Control System Integration Engineering for Standardized Facility Wiring, Machine Tool Control, Fixed Installation Power Distribution, and Cost-Optimized Reliability Across Diverse Industrial Environments

Technical Department

on30/04/2026

GAALFLEX® CONTROL – H05V-K & H07V-K

Feichun GAALFLEX® CONTROL H05V-K/H07V-K: European Harmonized Industrial Control Cable (H05V-K 300/500 V & H07V-K 450/750 V, Single-Conductor PVC Insulation Type TI1, Class 5 Flexible Red Copper Conductor per IEC 60228, −10 to +70°C Temperature Range Fixed Laying & Portable Installation, Variable Bending Radius Design (3–4×D Depending on Conductor Size), Flame-Retardant & Self-Extinguishing per IEC 60332-1-2, RoHS & CE Certification, Harmonized European Standards Compliance (EN 50525-2-31, CEI 20-107, IEC 60811, BS 6004), Cost-Effective Standard Cable for Non-Specialized Industrial Applications, Comprehensive 18+ SKU Portfolio (H05V-K: 0.5–1 mm², H07V-K: 1.5–240 mm²) Covering Entry-Level Control Circuits Through High-Capacity Industrial Feeders): Comprehensive European Standards Analysis & General Industrial Control System Integration Engineering for Standardized Facility Wiring, Machine Tool Control, Fixed Installation Power Distribution, and Cost-Optimized Reliability Across Diverse Industrial Environments