飞纯 Type 260 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用铠装馈电电缆，电压范围覆盖 1.1 至 11KV。根据产品资料，该铠装电缆主要用于需要机械保护和强度的电源馈电场景，也可作为机械设备馈电电缆，例如可移动矿用变电站和砂矿开采供电。 Type 260 与非铠装矿用拖曳电缆相比，最大的差异在于可弯曲镀锌低碳钢丝铠装。该结构位于内护套与外护套之间，使电缆在承受外部挤压、冲击、拖曳、石块磨损和设备边缘摩擦时，具备更强的机械保护能力。因此，Type 260 适合那些不仅要求供电可靠，还要求电缆具有更高物理防护强度的矿山馈电场景。

on22/06/2026

飞纯 Type 260 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用铠装馈电电缆技术解析

飞纯 Type 260 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用铠装馈电电缆，电压范围覆盖 1.1 至 11KV。根据产品资料，该铠装电缆主要用于需要机械保护和强度的电源馈电场景，也可作为机械设备馈电电缆，例如可移动矿用变电站和砂矿开采供电。 Type 260 与非铠装矿用拖曳电缆相比，最大的差异在于可弯曲镀锌低碳钢丝铠装。该结构位于内护套与外护套之间，使电缆在承受外部挤压、冲击、拖曳、石块磨损和设备边缘摩擦时，具备更强的机械保护能力。因此，Type 260 适合那些不仅要求供电可靠，还要求电缆具有更高物理防护强度的矿山馈电场景。

飞纯 Type 240 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用馈电与长壁供电电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，该电缆主要作为机械设备电源馈电电缆或长壁供电电缆使用，尤其适用于对接地性能、Pilot 回路和供电连续性要求较高的矿山重载供电场景。 Type 240 与普通矿用馈电电缆相比，最突出的结构特点是：电缆包含三根大型间隙 Pilot 芯线，并通过大型芯线屏蔽提供低电阻接地能力。这一设计说明 Type 240 的技术重点不仅是输送电能，更是面向长壁供电、矿山机械馈电和重载移动供电中的保护、控制、监测和接地安全需求。

Technical Department

on22/06/2026

飞纯 Type 240 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用馈电与长壁供电电缆技术解析

飞纯 Type 240 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用馈电与长壁供电电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，该电缆主要作为机械设备电源馈电电缆或长壁供电电缆使用，尤其适用于对接地性能、Pilot 回路和供电连续性要求较高的矿山重载供电场景。 Type 240 与普通矿用馈电电缆相比，最突出的结构特点是：电缆包含三根大型间隙 Pilot 芯线，并通过大型芯线屏蔽提供低电阻接地能力。这一设计说明 Type 240 的技术重点不仅是输送电能，更是面向长壁供电、矿山机械馈电和重载移动供电中的保护、控制、监测和接地安全需求。

UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.

Technical Department

on16/06/2026

PROTOMONT、PROTOLON、TENAX、CORDAFLEX、NSSHOEU、TUNNELFLEX、MINEMASTER、SHD-GC、G-GC、MT 818 与光纤电缆工程指南

在矿山、隧道和散料输送行业，mining cable 并不是一种单一产品，而是一张工程地图：卷筒电缆、拖曳电缆、馈电电缆、固定敷设电缆、隧道电缆、疏浚与潜水泵电缆、ground-check 电缆、光纤通信电缆以及 OEM 定制电缆系统都属于其中。一个矿山项目可能同时使用 LHD 低压 0.6/1 kV 卷筒电缆、露天挖掘机中压拖曳电缆、TBM 6/10 至 18/30 kV 中压卷筒电缆、隧道固定馈电电缆和矿山自动化光纤网络。因此，正确选型不是先问品牌名称，而是先问应用：电缆如何运动、如何弯曲、如何接地、承担什么电压、适用哪个区域标准、护套会受到什么环境攻击。