Paper Insulated 11/11KV 是一种用于固定条件下的高压馈电电缆，采用传统纸带绝缘、整体铅护套和钢丝铠装结构。电缆由三根扇形绞合铜导体组成，每根导体外分别绕包纸带绝缘。三根绝缘线芯成缆后使用黄麻填充内部空隙，并在完整缆芯外围继续设置纸带统包绝缘。纸绝缘缆芯外设置整体铅护套，铅护套外依次设置PVC垫层、镀锌钢丝铠装和PVC外护套，构成固定敷设高压馈电电缆的完整保护体系。

on22/06/2026

飞纯 Paper Insulated 11/11KV：纸绝缘铅护套钢丝铠装固定敷设高压馈电电缆

Paper Insulated 11/11KV 是一种用于固定条件下的高压馈电电缆，采用传统纸带绝缘、整体铅护套和钢丝铠装结构。电缆由三根扇形绞合铜导体组成，每根导体外分别绕包纸带绝缘。三根绝缘线芯成缆后使用黄麻填充内部空隙，并在完整缆芯外围继续设置纸带统包绝缘。纸绝缘缆芯外设置整体铅护套，铅护套外依次设置PVC垫层、镀锌钢丝铠装和PVC外护套，构成固定敷设高压馈电电缆的完整保护体系。

飞纯电缆,Feichun Cable,飞纯高压电缆,飞纯矿用电缆,AS/NZS 1972:2006,AS/NZS 1125,AS/NZS 3808,AS/NZS 1429.1,6.35/11KV,12.7/22KV,11KV高压电缆,22KV高压电缆,高压馈电电缆,固定敷设电缆,固定敷设,固定条件,非卷筒电缆,非拖曳电缆,绞合裸铜导体,绞合普通铜导体,裸铜,非镀锡铜导体,XLPE绝缘,交联聚乙烯绝缘,PVC内护套,PVC外护套,镀锌钢丝铠装,GSWA,铜线屏蔽,逐芯铜线屏蔽,屏蔽兼接地导体,earth conductor,屏蔽面积,钢丝铠装,机械保护,铠装钢丝直径,2.00mm钢丝,2.50mm钢丝,3.15mm钢丝,三芯结构,单层铠装,双层护套,内护套+铠装+外护套,高压馈电,固定线路供电,矿井配电,工业配电,固定安装,导体截面16-400mm²,6.35/11KV截面16-400mm²,12.7/22KV截面35-400mm²,绝缘厚度3.4mm,绝缘厚度5.5mm,标称外径46.6-108.2mm,标称重量330-2420kg/100m,屏蔽面积5.7-67.3mm²,选型框架,技术数据表,结构图,工程咨询,高压终端,高压接头,安徽飞纯,飞纯工程

Technical Department

on22/06/2026

飞纯 XLPE绝缘 6.35/11KV 与 12.7/22KV：固定敷设高压馈电电缆技术解析

XLPE绝缘高压馈电电缆是什么？该系列是用于固定条件下的高压馈电电缆，电压等级包括 6.35/11KV 和 12.7/22KV。电缆采用绞合裸铜动力导体、XLPE绝缘、逐芯铜线屏蔽、PVC内护套、镀锌钢丝铠装和PVC外护套，形成适合固定线路供电的高压铠装电缆结构。

飞纯 Type 455 是一种依据 AS/NZS 2802:2000 设计的 Class 1 矿用卷筒与拖曳电缆，覆盖 3.3KV、6.6KV、11KV、22KV 和 33KV 系列。该系列采用减小的绝缘和护套厚度，并取消内部 Cradle 托架。两根接地导体和一根 Pilot 均布置在动力线芯外侧间隙，且每根接地芯与 Pilot 采用相同的导体规格。 Type 455 面向需要尽量减小电缆外径和质量的卷筒与拖曳应用，尤其适合堆取料机等对卷筒容量、移动质量和安装空间较为敏感的设备。

Technical Department

on22/06/2026

飞纯 Type 455（Class 1）3.3 至 33KV：面向最小外径和质量的堆取料机卷筒与拖曳电缆

飞纯 Type 455 是一种依据 AS/NZS 2802:2000 设计的 Class 1 矿用卷筒与拖曳电缆，覆盖 3.3KV、6.6KV、11KV、22KV 和 33KV 系列。该系列采用减小的绝缘和护套厚度，并取消内部 Cradle 托架。两根接地导体和一根 Pilot 均布置在动力线芯外侧间隙，且每根接地芯与 Pilot 采用相同的导体规格。 Type 455 面向需要尽量减小电缆外径和质量的卷筒与拖曳应用，尤其适合堆取料机等对卷筒容量、移动质量和安装空间较为敏感的设备。

飞纯 Type 450 适用于广泛的矿山设备供电应用，从拉铲挖掘机电缆到慢速卷筒收放场景均可覆盖。该系列面向需要铜屏蔽，同时希望获得较轻重量和较小电缆尺寸的项目。

Technical Department

on22/06/2026

飞纯 Type 450（Class 1）3.3 至 33KV：轻量化铜屏蔽矿用卷筒与拖曳电缆技术解析

飞纯 Type 450 适用于广泛的矿山设备供电应用，从拉铲挖掘机电缆到慢速卷筒收放场景均可覆盖。该系列面向需要铜屏蔽，同时希望获得较轻重量和较小电缆尺寸的项目。

飞纯 Type 441 Class 1 是依据 AS/NZS 2802:2000 设计的矿用卷筒与拖曳电缆，覆盖 3.3KV、6.6KV、11KV 和 22KV 系列。该系列适用于多种矿山机械和设备的移动供电，既适合电缆随设备拖曳运行，也适合通过卷筒进行反复收放。 Type 441 Class 1 配置一根中央可伸长 Pilot，并采用半导电 PCP 托架支撑和保护三根动力线芯。这一结构使动力芯在电缆受到挤压或压扁时不容易发生异常位移和内部损伤。

Technical Department

on22/06/2026

飞纯 Type 441（Class 1）3.3 至 22KV：兼顾拖曳与卷筒应用的矿用柔性电缆技术解析

飞纯 Type 441 Class 1 是依据 AS/NZS 2802:2000 设计的矿用卷筒与拖曳电缆，覆盖 3.3KV、6.6KV、11KV 和 22KV 系列。该系列适用于多种矿山机械和设备的移动供电，既适合电缆随设备拖曳运行，也适合通过卷筒进行反复收放。 Type 441 Class 1 配置一根中央可伸长 Pilot，并采用半导电 PCP 托架支撑和保护三根动力线芯。这一结构使动力芯在电缆受到挤压或压扁时不容易发生异常位移和内部损伤。

飞纯 Type 441 是一种依据 AS/NZS 2802:2000 设计的 Class 2 矿用卷筒与拖曳电缆，额定电压为 1.1/1.1KV。该系列面向多种矿山移动供电用途。与只强调拖曳或只强调卷筒运行的电缆不同， Type 441 明确适用于拖曳应用和卷筒收放应用。 Type 441 在电缆中心设置一根可伸长 Pilot，同时采用半导电 PCP 托架支撑三根动力线芯。这一支撑结构有助于

Technical Department

on22/06/2026

飞纯 Type 441（Class 2）1.1/1.1KV：兼顾拖曳与卷筒应用的矿用柔性电缆技术解析

飞纯 Type 441 是一种依据 AS/NZS 2802:2000 设计的 Class 2 矿用卷筒与拖曳电缆，额定电压为 1.1/1.1KV。该系列面向多种矿山移动供电用途。与只强调拖曳或只强调卷筒运行的电缆不同， Type 441 明确适用于拖曳应用和卷筒收放应用。 Type 441 在电缆中心设置一根可伸长 Pilot，同时采用半导电 PCP 托架支撑三根动力线芯。这一支撑结构有助于维持动力芯的位置与结构稳定，使电缆在受到挤压或压扁时不易发生内部芯线损伤。

飞纯 Type 440 是一种用于机械和设备电源连接的柔性馈电拖曳电缆。产品电压范围覆盖 1.1KV 至 22KV，可服务不同电压等级和导体截面的矿山机械供电系统。 Type 440 的核心结构特点是设置三根较大规格的间隙 Pilot 芯线，同时采用中央半导电 PCP 托架隔离结构。中央托架用于支撑内部结构并保护三根动力线芯，三根 Pilot 则可用于设备控制、监测或保护回路。电缆还设置复合屏蔽接地导体。该结构由镀锡退火铜编织与聚酯纱交织组成，在动力线芯外形成复合屏蔽，并承担接地导体功能。

Technical Department

on22/06/2026

飞纯 Type 440 1.1 至 22KV：配备三根大型 Pilot 的矿用柔性馈电拖曳电缆技术解析

飞纯 Type 440 系列主要用作机械和设备的柔性馈电拖曳电缆。电缆配置三根较大规格的间隙 Pilot 芯线，并在中心采用半导电 PCP 托架隔离结构，用于支撑和保护三根动力线芯。

飞纯 Type 275 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用柔性馈电电缆，电压等级为 1.1/1.1KV。根据产品资料，该电缆主要作为梭车和泵的柔性馈电电缆使用。 Type 275 的关键工程特点是接地芯线设计用于降低电缆在张力卷绕过程中发生断丝的风险。梭车电缆和泵用馈电电缆经常处于卷绕、拖曳、拉伸、反复弯曲和移动工况中，接地芯线如果在张力卷绕过程中发生断丝，将影响接地连续性和供电安全。Type 275 因此更强调接地芯线结构可靠性，而不是单纯的导体截面或外径参数。

Technical Department

on22/06/2026

飞纯 Type 275 1.1/1.1KV：基于 AS/NZS 1802:2003 的澳洲矿用梭车与泵用柔性馈电电缆技术解析

飞纯 Type 275 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用柔性馈电电缆，电压等级为 1.1/1.1KV。根据产品资料，该电缆主要作为梭车和泵的柔性馈电电缆使用。 Type 275 的关键工程特点是接地芯线设计用于降低电缆在张力卷绕过程中发生断丝的风险。梭车电缆和泵用馈电电缆经常处于卷绕、拖曳、拉伸、反复弯曲和移动工况中，接地芯线如果在张力卷绕过程中发生断丝，将影响接地连续性和供电安全。Type 275 因此更强调接地芯线结构可靠性，而不是单纯的导体截面或外径参数。

飞纯 Type 260 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用铠装馈电电缆，电压范围覆盖 1.1 至 11KV。根据产品资料，该铠装电缆主要用于需要机械保护和强度的电源馈电场景，也可作为机械设备馈电电缆，例如可移动矿用变电站和砂矿开采供电。 Type 260 与非铠装矿用拖曳电缆相比，最大的差异在于可弯曲镀锌低碳钢丝铠装。该结构位于内护套与外护套之间，使电缆在承受外部挤压、冲击、拖曳、石块磨损和设备边缘摩擦时，具备更强的机械保护能力。因此，Type 260 适合那些不仅要求供电可靠，还要求电缆具有更高物理防护强度的矿山馈电场景。

Technical Department

on22/06/2026

飞纯 Type 260 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用铠装馈电电缆技术解析

飞纯 Type 260 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用铠装馈电电缆，电压范围覆盖 1.1 至 11KV。根据产品资料，该铠装电缆主要用于需要机械保护和强度的电源馈电场景，也可作为机械设备馈电电缆，例如可移动矿用变电站和砂矿开采供电。 Type 260 与非铠装矿用拖曳电缆相比，最大的差异在于可弯曲镀锌低碳钢丝铠装。该结构位于内护套与外护套之间，使电缆在承受外部挤压、冲击、拖曳、石块磨损和设备边缘摩擦时，具备更强的机械保护能力。因此，Type 260 适合那些不仅要求供电可靠，还要求电缆具有更高物理防护强度的矿山馈电场景。

飞纯 Type 245 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用非常柔性长壁采煤机电缆，电压范围覆盖 1.1 至 6.6KV。根据产品资料，该电缆主要用作长壁采煤机电缆，也可用于连续采煤机和长壁外围电缆。 Type 245 的关键结构特征是三根中央可伸长 Pilot / 控制芯线。这三根中央 Pilot 芯线可用于接地连续性监测和控制回路。对于长壁采煤机来说，电缆不仅要传输动力电能，还要承担设备控制、保护联锁、接地连续性确认和移动工况下的安全监测任务。

Technical Department

on22/06/2026

飞纯 Type 245 1.1 至 6.6KV：基于 AS/NZS 1802:2003 的澳洲矿用长壁采煤机电缆技术解析

飞纯矿用电缆 Type 245 是一种非常柔软的矿用电缆，主要用作长壁采煤机电缆，也适用于连续采煤机和长壁外围电缆。该电缆含有三根中央 Pilot 芯线，可用于接地连续性监测和控制回路，适合长壁采煤系统中对柔性、保护、监测和控制可靠性要求较高的移动供电场景。

飞纯 Type 241 Superflex 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用超柔性电缆，电压范围覆盖 1.1 至 6.6KV。它与 Type 241 电缆结构相似，但更加柔软，并具有更小的自然弯曲半径。该系列特别适合作为单轨吊电缆使用。单轨吊系统中，电缆通常以环状方式悬挂或移动，如果电缆自然弯曲半径较大，电缆环会占用更多空间，也更容易与其他设备、支架或结构发生挂碰。Type 241 Superflex 通过更高柔性的导体和结构设计，使电缆环更窄，为其他设备留出更多空间，并减少电缆被挂住、刮碰或卡滞的机会。

Technical Department

on22/06/2026

飞纯 Type 241 Superflex 1.1 至 6.6KV：基于 AS/NZS 1802:2003 的澳洲矿用超柔性单轨吊电缆技术解析

飞纯矿用电缆 Type 241 Superflex 与 Type 241 电缆结构相似，但更加柔软，并具有更小的自然弯曲半径。该电缆适合作为单轨吊电缆使用，在电缆环更窄的工况下仍能保持良好弯曲适应性，从而为其他设备留出更多空间，并减少电缆被挂碰、缠绕或卡滞的风险。

飞纯 Type 241 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用主馈电、泵电缆和电源供电电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，该电缆适用于多种用途，包括连续采煤机主馈电电缆、泵电缆和电源供电电缆。 Type 241 的关键安全特征是总半导电屏蔽。该结构能够在任何物体穿透护套后、尚未接触动力导体之前，先形成保护性接地接触。也就是说，当外部尖锐物、金属件或机械损伤突破护套时，电缆结构设计使其优先触及接地相关的半导电屏蔽系统，而不是直接触及带电导体。这一设计对于矿山连续采煤机、泵站和移动电源供电场景具有重要安全意义。

Technical Department

on22/06/2026

飞纯 Type 241 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用主馈电、泵电缆与电源供电电缆技术解析

飞纯矿用电缆 Type 241 适用于多种矿山供电场景，包括连续采煤机主馈电电缆、泵电缆和电源供电电缆。其总半导电屏蔽结构能够在任何物体穿透护套后、接触动力导体前，先提供保护性接地接触，从而提升矿山移动供电系统的安全性。

飞纯 Type 240 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用馈电与长壁供电电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，该电缆主要作为机械设备电源馈电电缆或长壁供电电缆使用，尤其适用于对接地性能、Pilot 回路和供电连续性要求较高的矿山重载供电场景。 Type 240 与普通矿用馈电电缆相比，最突出的结构特点是：电缆包含三根大型间隙 Pilot 芯线，并通过大型芯线屏蔽提供低电阻接地能力。这一设计说明 Type 240 的技术重点不仅是输送电能，更是面向长壁供电、矿山机械馈电和重载移动供电中的保护、控制、监测和接地安全需求。

Technical Department

on22/06/2026

飞纯 Type 240 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用馈电与长壁供电电缆技术解析

飞纯 Type 240 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用馈电与长壁供电电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，该电缆主要作为机械设备电源馈电电缆或长壁供电电缆使用，尤其适用于对接地性能、Pilot 回路和供电连续性要求较高的矿山重载供电场景。 Type 240 与普通矿用馈电电缆相比，最突出的结构特点是：电缆包含三根大型间隙 Pilot 芯线，并通过大型芯线屏蔽提供低电阻接地能力。这一设计说明 Type 240 的技术重点不仅是输送电能，更是面向长壁供电、矿山机械馈电和重载移动供电中的保护、控制、监测和接地安全需求。

飞纯 Type 209 是飞纯电缆基于 AS/NZS 1802:2003 卷筒与拖曳电缆体系设计的矿用柔性馈电与拖曳电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，Type 209 系列电缆主要作为矿山机械柔性馈电电缆使用，更适合作为拖曳电缆而不是高频卷筒电缆。较小规格适用于钻机、手持工具和移动设备。这一定义是理解 Type 209 的关键。Type 209 不是普通工业橡套软电缆，也不只是单纯的矿山供电线。它的核心定位是矿山机械柔性馈电电缆，也就是为矿山机械提供可移动、可拖曳、可适应复杂作业路径的供电系统。同时，它更适合作为拖曳电缆，即跟随设备移动的电缆，而不是长期高频卷绕使用的卷筒电缆。

Technical Department

on22/06/2026

飞纯 Type 209 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用柔性馈电与拖曳电缆技术解析

飞纯 Type 209 是飞纯电缆基于 AS/NZS 1802:2003 卷筒与拖曳电缆体系设计的矿用柔性馈电与拖曳电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，Type 209 系列电缆主要作为矿山机械柔性馈电电缆使用，更适合作为拖曳电缆而不是高频卷筒电缆。较小规格适用于钻机、手持工具和移动设备。这一定义是理解 Type 209 的关键。Type 209 不是普通工业橡套软电缆，也不只是单纯的矿山供电线。它的核心定位是矿山机械柔性馈电电缆，也就是为矿山机械提供可移动、可拖曳、可适应复杂作业路径的供电系统。同时，它更适合作为拖曳电缆，即跟随设备移动的电缆，而不是长期高频卷绕使用的卷筒电缆。

UNE 22511, published and maintained by AENOR (Asociación Española de Normalización y Certificación), is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Operating as a specialized overlay on IEC 60502-1, it extends that base standard's electrical requirements with stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys adoption across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables.

Technical Department

on22/06/2026

飞纯矿用电缆 MYP / MC 通过俄罗斯 FSC 和欧洲 ATEX 严苛测试与认证！

矿山是电缆应用中最严苛的环境之一。井下空间狭窄，设备移动频繁，煤尘和可燃气体可能形成爆炸性环境；露天矿则可能长期遭遇低温、雨雪、泥浆、紫外线、油污和机械拖拽。电缆一旦发生护套开裂、绝缘损伤、过热、燃烧或电弧风险，影响的不只是设备停机，还可能触发人员安全、消防安全和爆炸危险控制问题。飞纯矿用电缆 MYP / MC 的价值，正是在这种高风险场景下体现出来：它不是为普通室内布线而设计，而是面向矿山动力连接、移动设备、采煤机、掘进机、输送系统、移动变电站和高机械应力供电系统而构建的安全电缆方案。

Comprehensive professional guide to the TYPE 240-LED — an AS/NZS 1802:2003 certified power supply cable for underground coal mining with integrated self-powered LED illumination and composite copper/polyester braid insulation screening. In FeiChun's AS/NZS 1802 illuminated cable range, the TYPE 240-LED fills a specific and important niche: power supply applications where earth-fault current capacity and electromagnetic compatibility (EMC) are critical requirements. Where the TYPE 241-LED (flagship) uses a semi-conductive elastomeric screen for maximum FC-EMH™ induction efficiency, the TYPE 240-LED uses a composite copper/polyester braid screen that delivers superior earth-fault current-carrying capacity and better EMC shielding — essential for feeding longwall variable-speed drives (VSDs), AFC drives with sensitive PLC control systems, and any underground coal equipment where electromagnetic interference could compromise safety-critical control electronics. FeiChun's engineering team has developed a braid-compensated FC-EMH™ coil geometry specifically for the Type 240 construction, overcoming the 25–30% magnetic-field attenuation caused by the copper braid's eddy-current shielding to deliver reliable LED illumination at all normal operating loads. The proprietary FC-TPU™ P-Series sheath (Formula FC-2026-TPU-P4) is optimised for the semi-permanent static deployment typical of power supply cables — resisting flat-spotting, creep, and long-term degradation during prolonged installation along gate roads. This article covers cable construction, the braid screen vs elastomeric screen trade-off, braid-compensated energy harvesting, four-layer surge protection, complete dimensional and electrical data across all four voltage classes (1.1–11 kV, 33 part numbers), standards compliance, application scenarios, product selection against the TYPE 241-LED, and direct factory procurement.

Technical Department

on19/03/2026

TYPE 240-LED: AS/NZS 1802 Certified Self-Powered LED Illuminated Power Supply Cable for Underground Coal Mining

Comprehensive professional guide to the TYPE 240-LED — an AS/NZS 1802:2003 certified power supply cable for underground coal mining with integrated self-powered LED illumination and composite copper/polyester braid insulation screening. In FeiChun’s AS/NZS 1802 illuminated cable range, the TYPE 240-LED fills a specific and important niche: power supply applications where earth-fault current capacity and electromagnetic compatibility (EMC) are critical requirements. Where the TYPE 241-LED (flagship) uses a semi-conductive elastomeric screen for maximum FC-EMH™ induction efficiency, the TYPE 240-LED uses a composite copper/polyester braid screen that delivers superior earth-fault current-carrying capacity and better EMC shielding — essential for feeding longwall variable-speed drives (VSDs), AFC drives with sensitive PLC control systems, and any underground coal equipment where electromagnetic interference could compromise safety-critical control electronics. FeiChun’s engineering team has developed a braid-compensated FC-EMH™ coil geometry specifically for the Type 240 construction, overcoming the 25–30% magnetic-field attenuation caused by the copper braid’s eddy-current shielding to deliver reliable LED illumination at all normal operating loads. The proprietary FC-TPU™ P-Series sheath (Formula FC-2026-TPU-P4) is optimised for the semi-permanent static deployment typical of power supply cables — resisting flat-spotting, creep, and long-term degradation during prolonged installation along gate roads. This article covers cable construction, the braid screen vs elastomeric screen trade-off, braid-compensated energy harvesting, four-layer surge protection, complete dimensional and electrical data across all four voltage classes (1.1–11 kV, 33 part numbers), standards compliance, application scenarios, product selection against the TYPE 241-LED, and direct factory procurement.

Comprehensive professional guide to the TYPE 241-LED — FeiChun's flagship illuminated mining cable and the most versatile LED-equipped cable certified to AS/NZS 1802:2003 for underground coal mining. With 45 part numbers spanning 1.1 kV through 22 kV, the TYPE 241-LED covers virtually every underground coal feeder and trailing application: continuous miner trailing cables, longwall shearer power feeders, AFC drive feeders, BSL feeders, panel pump cables, and mobile substation HV incoming supply — all with self-powered LED visibility that requires no external DC supplies, no gate end box modifications, and no coupler changes. Where FeiChun's TYPE 275-LED serves shuttle-car reeling duty and the TYPE 260-LED serves armoured feeder duty, the TYPE 241-LED is the workhorse general-purpose illuminated cable for continuous miners and longwall systems — the machines that do the actual cutting and haulage at the coalface. The proprietary FC-TPU™ C-Series sheath (Formula FC-2026-TPU-C1) is specifically formulated for the crushing loads continuous miners and shuttle cars impose when they run over trailing feeders. The semi-conductive elastomeric screen is magnetically transparent, giving the FC-EMH™ induction system 15–20% higher coupling efficiency than braid-screened cables — critical for maintaining reliable LED illumination at partial continuous-miner load or longwall shearer idle. This article covers cable construction, dual energy harvesting architecture, FC-TPU™ C-Series crushing-resistant sheath, four-layer surge protection, complete dimensional and electrical data across all five voltage classes, full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for continuous miners and longwall systems, product selection versus the TYPE 260-LED and TYPE 275-LED, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

Technical Department

on19/03/2026

TYPE 241-LED: FeiChun’s Flagship AS/NZS 1802 Certified Self-Powered LED Illuminated Mining Cable for Continuous Miners, Longwall Shearers & Underground Coal Production

Comprehensive professional guide to the TYPE 241-LED — FeiChun’s flagship illuminated mining cable and the most versatile LED-equipped cable certified to AS/NZS 1802:2003 for underground coal mining. With 45 part numbers spanning 1.1 kV through 22 kV, the TYPE 241-LED covers virtually every underground coal feeder and trailing application: continuous miner trailing cables, longwall shearer power feeders, AFC drive feeders, BSL feeders, panel pump cables, and mobile substation HV incoming supply — all with self-powered LED visibility that requires no external DC supplies, no gate end box modifications, and no coupler changes. Where FeiChun’s TYPE 275-LED serves shuttle-car reeling duty and the TYPE 260-LED serves armoured feeder duty, the TYPE 241-LED is the workhorse general-purpose illuminated cable for continuous miners and longwall systems — the machines that do the actual cutting and haulage at the coalface. The proprietary FC-TPU™ C-Series sheath (Formula FC-2026-TPU-C1) is specifically formulated for the crushing loads continuous miners and shuttle cars impose when they run over trailing feeders. The semi-conductive elastomeric screen is magnetically transparent, giving the FC-EMH™ induction system 15–20% higher coupling efficiency than braid-screened cables — critical for maintaining reliable LED illumination at partial continuous-miner load or longwall shearer idle. This article covers cable construction, dual energy harvesting architecture, FC-TPU™ C-Series crushing-resistant sheath, four-layer surge protection, complete dimensional and electrical data across all five voltage classes, full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for continuous miners and longwall systems, product selection versus the TYPE 260-LED and TYPE 275-LED, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

Complete technical guide to the TYPE 260-LED — the world's first LED illuminated armoured feeder cable certified to AS/NZS 1802:2003 for underground coal mining. Multi-voltage 1.1–11 kV. FC-ALC™ over-armour LED architecture with uncompromised steel armour impact protection. Dual energy harvesting: FC-CVD™ capacitive voltage divider (1.1 kV) + FC-EMH™ electromagnetic induction with armour-compensated coil (≥ 3.3 kV). FC-SPM™ four-layer surge protection with MOV backup. FC-TPU™ A-Series armour-grade translucent sheath. Ex ia IIC methane-safe (AS/NZS 60079.11 / AS/NZS 3808). Plug-and-play. QLD CMSH Act & NSW WHS (Mines) Reg compliant. Conductor sizes 6–150 mm². FeiChun — direct factory manufacturer.

Technical Department

on19/03/2026

TYPE 260-LED: The World’s First AS/NZS 1802 Certified Self-Powered LED Illuminated Armoured Feeder Cable for Underground Coal Mining

Complete technical guide to the TYPE 260-LED — the world’s first LED illuminated armoured feeder cable certified to AS/NZS 1802:2003 for underground coal mining. Multi-voltage 1.1–11 kV. FC-ALC™ over-armour LED architecture with uncompromised steel armour impact protection. Dual energy harvesting: FC-CVD™ capacitive voltage divider (1.1 kV) + FC-EMH™ electromagnetic induction with armour-compensated coil (≥ 3.3 kV). FC-SPM™ four-layer surge protection with MOV backup. FC-TPU™ A-Series armour-grade translucent sheath. Ex ia IIC methane-safe (AS/NZS 60079.11 / AS/NZS 3808). Plug-and-play. QLD CMSH Act & NSW WHS (Mines) Reg compliant. Conductor sizes 6–150 mm². FeiChun — direct factory manufacturer.

Comprehensive professional guide to the TYPE 275-LED — the world's first LED illuminated reeling cable certified to AS/NZS 1802:2003, the mandatory Australian/New Zealand standard for underground coal mining reeling and trailing cables. While FeiChun's TYPE 440-LED, TYPE 450-LED, and TYPE 455-LED trailing cable platforms are certified to AS/NZS 2802:2000 (the general mining cable standard), underground coal mines in Queensland, New South Wales, and New Zealand require cables certified to the more stringent AS/NZS 1802:2003, which imposes additional mandatory requirements for flame propagation, earth-fault loop impedance, pilot-circuit continuity monitoring, and methane atmosphere compatibility. The TYPE 275-LED meets every one of these requirements — bringing self-powered LED illumination to underground coal mine shuttle cars, pumps, and auxiliary equipment for the first time. This article covers the full cable construction with semi-conductive elastomeric cradle screening, the FeiChun® FC-CVD™ capacitive voltage divider with shuttle-car load-tracking enhanced capacitor bank, the proprietary FC-TPU™ S-Series shuttle-car grade translucent sheath (Formula FC-2026-TPU-S2) rated for 50,000+ bending cycles, the FC-SPM™ three-layer surge protection module, complete dimensional and electrical data for all four conductor sizes (16 mm² to 50 mm²), full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for shuttle cars and underground coal pumps, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

Technical Department

on19/03/2026

TYPE 275-LED: The World’s First AS/NZS 1802 Certified Self-Powered LED Illuminated Reeling Cable for Underground Coal Mining

Comprehensive professional guide to the TYPE 275-LED — the world’s first LED illuminated reeling cable certified to AS/NZS 1802:2003, the mandatory Australian/New Zealand standard for underground coal mining reeling and trailing cables. While FeiChun’s TYPE 440-LED, TYPE 450-LED, and TYPE 455-LED trailing cable platforms are certified to AS/NZS 2802:2000 (the general mining cable standard), underground coal mines in Queensland, New South Wales, and New Zealand require cables certified to the more stringent AS/NZS 1802:2003, which imposes additional mandatory requirements for flame propagation, earth-fault loop impedance, pilot-circuit continuity monitoring, and methane atmosphere compatibility. The TYPE 275-LED meets every one of these requirements — bringing self-powered LED illumination to underground coal mine shuttle cars, pumps, and auxiliary equipment for the first time. This article covers the full cable construction with semi-conductive elastomeric cradle screening, the FeiChun® FC-CVD™ capacitive voltage divider with shuttle-car load-tracking enhanced capacitor bank, the proprietary FC-TPU™ S-Series shuttle-car grade translucent sheath (Formula FC-2026-TPU-S2) rated for 50,000+ bending cycles, the FC-SPM™ three-layer surge protection module, complete dimensional and electrical data for all four conductor sizes (16 mm² to 50 mm²), full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for shuttle cars and underground coal pumps, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.