[email protected]

−5 to +70°C flexible

9 Min Read
GAALFLEX® VFD 1300 A: BS 5467-Compliant Armoured Variable Frequency Drive Inverter Connection Cable for Harsh Industrial Environments, Outdoor Deployment, and Applications Requiring Mechanical Protection (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification in Mechanical Hazard Zones, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 580 Special Polyurethane Insulation Providing Superior Thermal Stability and Mechanical Robustness Compared to PE Standard Insulation, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression for Frequency Converter Signal Integrity, Steel Wire Armour Providing Comprehensive Mechanical Protection Against Puncture, Crushing, and Environmental Hazards Enabling Direct Burial and Outdoor Installation, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Inner Black RAL 9005 PVC Sheath Protecting Armour from Conductor Contact, Outer Black UV-Resistant PVC Compound Sheath Enabling Outdoor Industrial Installation Without Additional Protection, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, 12×D Minimum Bending Radius Supporting Field Routing in Armoured Configurations, BS 5467 Compliance Enabling UK and Commonwealth Market Acceptance, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Integration and Process Automation Acceptance in Mechanically Hazardous Environments)
Technical Department
on08/05/2026

BS 5467 GAALFLEX® VFD 1300 A

GAALFLEX® VFD 1300 A: BS 5467-Compliant Armoured Variable Frequency Drive Inverter Connection Cable for Harsh Industrial Environments, Outdoor Deployment, and Applications Requiring Mechanical Protection (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification in Mechanical Hazard Zones, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 580 Special Polyurethane Insulation Providing Superior Thermal Stability and Mechanical Robustness Compared to PE Standard Insulation, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression for Frequency Converter Signal Integrity, Steel Wire Armour Providing Comprehensive Mechanical Protection Against Puncture, Crushing, and Environmental Hazards Enabling Direct Burial and Outdoor Installation, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Inner Black RAL 9005 PVC Sheath Protecting Armour from Conductor Contact, Outer Black UV-Resistant PVC Compound Sheath Enabling Outdoor Industrial Installation Without Additional Protection, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, 12×D Minimum Bending Radius Supporting Field Routing in Armoured Configurations, BS 5467 Compliance Enabling UK and Commonwealth Market Acceptance, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Integration and Process Automation Acceptance in Mechanically Hazardous Environments)
9 Min Read
GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
Technical Department
on08/05/2026

GAALFLEX® VFD 1000 (2YSLCYK-J UL)

GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
9 Min Read
GAALFLEX® VFD 2YSLCYK-J: CPR-Compliant (EU 305/2011 + EN 50575:2014+A1:2016, Eca Classification) Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Mining Applications, and Outdoor Frequency Converter Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification from Servo Drives Through Industrial Motors, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor Mining and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Hazardous-Area Installation per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, CPR Fire Classification Eca [EN 13501-1] Enabling European Regulatory Compliance, Optional XLPE Halogen-Free Version [2XSLCHK-J] per IEC 60502-4 with Eca-Rated Black SHF1 Sheath, Suitable for Mining Machinery, Outdoor Industrial Systems, Automotive and Food Automation with Environmental Exposure, and Complete International VFD Infrastructure Compliance with Regulatory Mandates)
Technical Department
on08/05/2026

Type 2YSLCYK-J GAALFLEX® VFD

GAALFLEX® VFD 2YSLCYK-J: CPR-Compliant (EU 305/2011 + EN 50575:2014+A1:2016, Eca Classification) Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Mining Applications, and Outdoor Frequency Converter Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification from Servo Drives Through Industrial Motors, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor Mining and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Hazardous-Area Installation per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, CPR Fire Classification Eca [EN 13501-1] Enabling European Regulatory Compliance, Optional XLPE Halogen-Free Version [2XSLCHK-J] per IEC 60502-4 with Eca-Rated Black SHF1 Sheath, Suitable for Mining Machinery, Outdoor Industrial Systems, Automotive and Food Automation with Environmental Exposure, and Complete International VFD Infrastructure Compliance with Regulatory Mandates)
9 Min Read
GAALFLEX® VFD 2YSLCY-J: Shielded Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply and Frequency Converter Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD System Specification from Small Servo Drives Through High-Power Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 Enabling Field Installation and Drive Enclosure Routing, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Transparent or Transparent-Orange PVC Outer Sheath Enabling Visual Conductor Inspection and Installation Verification, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, Hazardous-Area Installation Capability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3 Enabling Integration with Modern Frequency Converter Installations, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, Optional XLPE Halogen-Free Version [2XSLCH-J] for Environmental Applications, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance)
Technical Department
on08/05/2026

Type 2YSLCY-J GAALFLEX® VFD

GAALFLEX® VFD 2YSLCY-J: Shielded Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply and Frequency Converter Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD System Specification from Small Servo Drives Through High-Power Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 Enabling Field Installation and Drive Enclosure Routing, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Transparent or Transparent-Orange PVC Outer Sheath Enabling Visual Conductor Inspection and Installation Verification, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, Hazardous-Area Installation Capability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3 Enabling Integration with Modern Frequency Converter Installations, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, Optional XLPE Halogen-Free Version [2XSLCH-J] for Environmental Applications, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance)
8 Min Read
GAALFLEX® CONTROL 601 CY (H05VVC4V5-K): Numbered-Core Shielded Flexible PVC Control Cable for EMI-Sensitive European and North American Building Electrical and Industrial Automation Applications (DIN VDE 300/500V Nominal Voltage [UL/CSA 600V Option Available], 3 kV Test Voltage, Overall Tinned Copper Braid Screen with Inner PVC Sheath Providing EMI Suppression and Coupling Prevention, Comprehensive 2–34 Multi-Core Portfolio with 0.5–2.5 mm² Continuous Cross-Section Range Enabling Complete EMI-Protected Control Specification, Flexible 12.5×D Bending Radius Optimized for Hand Routing and Equipment Mounting While Maintaining Shield Continuity, Self-Extinguishing and Flame-Retardant Performance per DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 Part 266-2 / EN 50266-2 / IEC 60332-3C Providing Professional Fire Safety, Class 5 Flexible Red Copper per IEC 60228, PVC Type TI1 Insulation per DIN VDE 0207 / UL 1581, PVC Type TM2 Inner Sheath, Grey (RAL 7001) Outer Sheath per DIN VDE 0281 Part 1 + HD 21.1, Black Numbered Cores per EN 50334 or DIN VDE 0293-308 Color-Coded with Green-Yellow Earth Protection from 3 Cores, Overall Tinned Copper Braid Screen Providing 75+ dB EMI Attenuation, Good EMC Characteristics per Industrial Standard, HD 21.13 S1 Flexible Standard Certification, Layered Stranding Architecture, UL VW-1 and CSA FT1 Flame-Retardant Certification, Temperature Range −40 to +70°C / −40 to +90°C Flexible Deployment (DIN VDE / UL/CSA), Complete Dual-Standard Compliance Enabling EMI-Sensitive European and North American Market Acceptance, RoHS and CE Certification, Engineered for EMI-Sensitive Building Electrical Distributions, Industrial Automation with Signal Integrity, Equipment Installation and Hand Routing, Flexible Shielded Control Circuits, and Applications Where Numbered-Core Shielded Standardization, Complete Multi-Core EMI Coverage, Inner Sheath Protection, Hand-Routing Flexibility, Self-Extinguishing Fire Safety, Good EMC Characteristics, and Dual-Standard Compliance Are Mission-Critical Requirements)
Technical Department
on08/05/2026

Type H05VVC4V5-K GAALFLEX® CONTROL 601 CY

GAALFLEX® CONTROL 601 CY (H05VVC4V5-K): Numbered-Core Shielded Flexible PVC Control Cable for EMI-Sensitive European and North American Building Electrical and Industrial Automation Applications (DIN VDE 300/500V Nominal Voltage [UL/CSA 600V Option Available], 3 kV Test Voltage, Overall Tinned Copper Braid Screen with Inner PVC Sheath Providing EMI Suppression and Coupling Prevention, Comprehensive 2–34 Multi-Core Portfolio with 0.5–2.5 mm² Continuous Cross-Section Range Enabling Complete EMI-Protected Control Specification, Flexible 12.5×D Bending Radius Optimized for Hand Routing and Equipment Mounting While Maintaining Shield Continuity, Self-Extinguishing and Flame-Retardant Performance per DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 Part 266-2 / EN 50266-2 / IEC 60332-3C Providing Professional Fire Safety, Class 5 Flexible Red Copper per IEC 60228, PVC Type TI1 Insulation per DIN VDE 0207 / UL 1581, PVC Type TM2 Inner Sheath, Grey (RAL 7001) Outer Sheath per DIN VDE 0281 Part 1 + HD 21.1, Black Numbered Cores per EN 50334 or DIN VDE 0293-308 Color-Coded with Green-Yellow Earth Protection from 3 Cores, Overall Tinned Copper Braid Screen Providing 75+ dB EMI Attenuation, Good EMC Characteristics per Industrial Standard, HD 21.13 S1 Flexible Standard Certification, Layered Stranding Architecture, UL VW-1 and CSA FT1 Flame-Retardant Certification, Temperature Range −40 to +70°C / −40 to +90°C Flexible Deployment (DIN VDE / UL/CSA), Complete Dual-Standard Compliance Enabling EMI-Sensitive European and North American Market Acceptance, RoHS and CE Certification, Engineered for EMI-Sensitive Building Electrical Distributions, Industrial Automation with Signal Integrity, Equipment Installation and Hand Routing, Flexible Shielded Control Circuits, and Applications Where Numbered-Core Shielded Standardization, Complete Multi-Core EMI Coverage, Inner Sheath Protection, Hand-Routing Flexibility, Self-Extinguishing Fire Safety, Good EMC Characteristics, and Dual-Standard Compliance Are Mission-Critical Requirements)
7 Min Read
GAALFLEX® CONTROL 601 (H05VV5-F): Numbered-Core Flexible PVC Control Cable for European and North American Building Electrical and Industrial Control Applications (DIN VDE 300/500V Nominal Voltage [UL/CSA 600V Option Available], 3 kV Test Voltage, Comprehensive 2–61 Multi-Core Portfolio with 0.5–2.5 mm² Continuous Cross-Section Range Enabling Complete Control Specification from Communication Circuits Through Distribution Systems, Small H05-Series Diameter Optimized for Compact Routing in Tight Installation Spaces and Cable Tray Applications, Flexible 12.5×D Bending Radius Optimized for Hand Routing and Equipment Mounting Without Cable Stress, Self-Extinguishing and Flame-Retardant Performance per DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 Part 266-2 / EN 50266-2 / IEC 60332-3C Providing Professional Fire Safety, Class 5 Flexible Red Copper per IEC 60228, PVC Type TI1 Insulation per DIN VDE 0207 / UL 1581, Grey (RAL 7001) Outer Sheath per DIN VDE 0281 Part 1 + HD 21.1, Black Numbered Cores per EN 50334 (2–5 Cores) or DIN VDE 0293-308 Color-Coded (from 6 Cores) with Green-Yellow Earth Protection (from 3 Cores), HD 21.13 S1 Flexible Standard Certification Enabling Hand Routing and Equipment Installation, Layered Stranding Architecture Supporting Mechanical Flexibility and Durability, UL VW-1 and CSA FT1 Flame-Retardant Certification, Temperature Range −40 to +70°C Fixed Installation / −5 to +70°C Flexible Deployment (DIN VDE Standard), Extended −40 to +90°C Fixed Installation (UL/CSA Option), Complete Dual-Standard Compliance Enabling European and North American Market Acceptance, RoHS and CE Certification, Engineered for Building Electrical Distributions, Industrial Control Systems, Equipment Installation, Flexible Equipment Routing, and Applications Where Numbered-Core Standardization, Complete Multi-Core Coverage, Small H05-Series Diameter, Flexible Hand Routing, Self-Extinguishing Fire Safety, and Dual-Standard Compliance Are Mission-Critical Requirements)
Technical Department
on08/05/2026

Type H05VV5-F GAALFLEX® CONTROL 601

GAALFLEX® CONTROL 601 (H05VV5-F): Numbered-Core Flexible PVC Control Cable for European and North American Building Electrical and Industrial Control Applications (DIN VDE 300/500V Nominal Voltage [UL/CSA 600V Option Available], 3 kV Test Voltage, Comprehensive 2–61 Multi-Core Portfolio with 0.5–2.5 mm² Continuous Cross-Section Range Enabling Complete Control Specification from Communication Circuits Through Distribution Systems, Small H05-Series Diameter Optimized for Compact Routing in Tight Installation Spaces and Cable Tray Applications, Flexible 12.5×D Bending Radius Optimized for Hand Routing and Equipment Mounting Without Cable Stress, Self-Extinguishing and Flame-Retardant Performance per DIN VDE 0482 Part 265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 Part 266-2 / EN 50266-2 / IEC 60332-3C Providing Professional Fire Safety, Class 5 Flexible Red Copper per IEC 60228, PVC Type TI1 Insulation per DIN VDE 0207 / UL 1581, Grey (RAL 7001) Outer Sheath per DIN VDE 0281 Part 1 + HD 21.1, Black Numbered Cores per EN 50334 (2–5 Cores) or DIN VDE 0293-308 Color-Coded (from 6 Cores) with Green-Yellow Earth Protection (from 3 Cores), HD 21.13 S1 Flexible Standard Certification Enabling Hand Routing and Equipment Installation, Layered Stranding Architecture Supporting Mechanical Flexibility and Durability, UL VW-1 and CSA FT1 Flame-Retardant Certification, Temperature Range −40 to +70°C Fixed Installation / −5 to +70°C Flexible Deployment (DIN VDE Standard), Extended −40 to +90°C Fixed Installation (UL/CSA Option), Complete Dual-Standard Compliance Enabling European and North American Market Acceptance, RoHS and CE Certification, Engineered for Building Electrical Distributions, Industrial Control Systems, Equipment Installation, Flexible Equipment Routing, and Applications Where Numbered-Core Standardization, Complete Multi-Core Coverage, Small H05-Series Diameter, Flexible Hand Routing, Self-Extinguishing Fire Safety, and Dual-Standard Compliance Are Mission-Critical Requirements)
1 Min Read
GAALFLEX® CONTROL 1000 CH: Fire-Safe Halogen-Free Multi-Core Shielded Control Cable with Triple-Layer Zero-Halogen Architecture (Halogen-Free Type TI6 Insulation + Tinned-Copper-Braid Overall Screen + Halogen-Free Type TM7 Outer Sheath) for Medical Facilities, Data Centers, and Fire-Code-Compliant Installations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228, Triple-Layer Zero-Halogen Architecture Combining Halogen-Free Type TI6 Insulation Protecting Conductor Bundles, Tinned-Copper-Braid Overall Screen Achieving ≥75 dB EMI Attenuation, Halogen-Free Type TM7 Outer Sheath Providing Environmental Protection Without Acid-Gas Release During Fire Conditions, IEC 60332-3-24 Enhanced Flame Test Certification Exceeding Standard IEC 60332-1-2 Baseline and Achieving European Building Code Fire-Safety Requirements, Zero-Halogenated-Acid-Gas Release per IEC 60754-1 (
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000 CH

GAALFLEX® CONTROL 1000 CH: Fire-Safe Halogen-Free Multi-Core Shielded Control Cable with Triple-Layer Zero-Halogen Architecture (Halogen-Free Type TI6 Insulation + Tinned-Copper-Braid Overall Screen + Halogen-Free Type TM7 Outer Sheath) for Medical Facilities, Data Centers, and Fire-Code-Compliant Installations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228, Triple-Layer Zero-Halogen Architecture Combining Halogen-Free Type TI6 Insulation Protecting Conductor Bundles, Tinned-Copper-Braid Overall Screen Achieving ≥75 dB EMI Attenuation, Halogen-Free Type TM7 Outer Sheath Providing Environmental Protection Without Acid-Gas Release During Fire Conditions, IEC 60332-3-24 Enhanced Flame Test Certification Exceeding Standard IEC 60332-1-2 Baseline and Achieving European Building Code Fire-Safety Requirements, Zero-Halogenated-Acid-Gas Release per IEC 60754-1 (
9 Min Read
GAALFLEX® CONTROL 1000 CY: Industrial-Grade Multi-Core Shielded Control Cable with Inner Sheath and Triple-Layer Architecture (Inner PVC Sheath + Tinned-Copper-Braid Overall Screen + Black Outer Sheath) for Signal and Control Distribution in Industrial Facilities, Factory Automation, Machine Control, and Instrumentation Integration (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228, Comprehensive Triple-Layer Shielding Architecture Combining Inner PVC Sheath (Type TM2) to Protect Conductor Bundles, Tinned-Copper-Braid Overall Screen Achieving ≥75 dB EMI Attenuation Across Industrial Frequency Spectrum (50 Hz–100 MHz Covering AC Drives, PLC Instrumentation, and Fieldbus Communications), Black (RAL 9005) PVC Type TM2 Outer Sheath, Flexible 20×D Bending Radius Enabling Ultra-Flexible Routing Within Compact Panel Enclosures and Tight Conduits Reducing Installation Time by 30–50% Compared to Standard 6×D Cables, Ultra-Flexible Class 5 Construction Enabling Repeated Flexing During Machine Operation Without Fatigue, Standardized 2–7 Core Portfolio with Continuous 0.5–35 mm² Cross-Section Range Including Dual-Pair Configurations and Special Color-Coded or Numbered-Core Options, Black EN 50334 Numbered Cores Enabling Zero-Documentation Installation, Green-Yellow Earth Protection Cores Available from 3-Core Configurations, UV Resistance Enabling Outdoor Facility Perimeter Routing, Flame-Retardant and Self-Extinguishing per EN 60332, Temperature Range −40 to +80°C Fixed Installation / −5 to +70°C Flexible Deployment, Layered Stranding Architecture Optimizing Flexibility and Shielding Effectiveness, RoHS and CE Certified, Engineered for Industrial Signal and Control Distribution, Factory Automation PLC and Drive Integration, Machine Tool Instrumentation, Motor Control Circuits, and Fieldbus Signal Distribution Where Simultaneous EMI Protection, Ultra-Flexible Routing, Triple-Layer Durability, and Compact Installation Are Critical Requirements)
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000 CY

GAALFLEX® CONTROL 1000 CY: Industrial-Grade Multi-Core Shielded Control Cable with Inner Sheath and Triple-Layer Architecture (Inner PVC Sheath + Tinned-Copper-Braid Overall Screen + Black Outer Sheath) for Signal and Control Distribution in Industrial Facilities, Factory Automation, Machine Control, and Instrumentation Integration (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228, Comprehensive Triple-Layer Shielding Architecture Combining Inner PVC Sheath (Type TM2) to Protect Conductor Bundles, Tinned-Copper-Braid Overall Screen Achieving ≥75 dB EMI Attenuation Across Industrial Frequency Spectrum (50 Hz–100 MHz Covering AC Drives, PLC Instrumentation, and Fieldbus Communications), Black (RAL 9005) PVC Type TM2 Outer Sheath, Flexible 20×D Bending Radius Enabling Ultra-Flexible Routing Within Compact Panel Enclosures and Tight Conduits Reducing Installation Time by 30–50% Compared to Standard 6×D Cables, Ultra-Flexible Class 5 Construction Enabling Repeated Flexing During Machine Operation Without Fatigue, Standardized 2–7 Core Portfolio with Continuous 0.5–35 mm² Cross-Section Range Including Dual-Pair Configurations and Special Color-Coded or Numbered-Core Options, Black EN 50334 Numbered Cores Enabling Zero-Documentation Installation, Green-Yellow Earth Protection Cores Available from 3-Core Configurations, UV Resistance Enabling Outdoor Facility Perimeter Routing, Flame-Retardant and Self-Extinguishing per EN 60332, Temperature Range −40 to +80°C Fixed Installation / −5 to +70°C Flexible Deployment, Layered Stranding Architecture Optimizing Flexibility and Shielding Effectiveness, RoHS and CE Certified, Engineered for Industrial Signal and Control Distribution, Factory Automation PLC and Drive Integration, Machine Tool Instrumentation, Motor Control Circuits, and Fieldbus Signal Distribution Where Simultaneous EMI Protection, Ultra-Flexible Routing, Triple-Layer Durability, and Compact Installation Are Critical Requirements)
1 Min Read
GAALFLEX® CONTROL 1000 H: Fire-Safe Zero-Halogen Low-Smoke Multi-Core Control Cable for Critical Infrastructure and Fire-Code-Regulated Installations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free TI6 Core Insulation per DIN VDE 0482 and IEC 60754-1, Black (RAL 9005) UV-Resistant Halogen-Free Compound Type TM7 Outer Sheath Enabling Complete Zero Halogenated Acid Gas Release (HCl/HBr/HF
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000 H

GAALFLEX® CONTROL 1000 H: Fire-Safe Zero-Halogen Low-Smoke Multi-Core Control Cable for Critical Infrastructure and Fire-Code-Regulated Installations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Halogen-Free TI6 Core Insulation per DIN VDE 0482 and IEC 60754-1, Black (RAL 9005) UV-Resistant Halogen-Free Compound Type TM7 Outer Sheath Enabling Complete Zero Halogenated Acid Gas Release (HCl/HBr/HF
10 Min Read
GAALFLEX® CONTROL 1000: Cost-Optimized UV-Resistant Low-Voltage Industrial Multi-Core Control Cable for Outdoor and Building Electrical Distribution Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PVC Type TI1 Core Insulation, Black (RAL 9005) UV-Resistant PVC Type TM2 Outer Sheath Enabling Indefinite Outdoor Exposure Without Ultraviolet-Induced Embrittlement or Color Degradation, Black Color-Numbered Cores per EN 50334 Standard with Green-Yellow Earth Protection Conductors from 3 Cores, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 EN 50265-2-1 and IEC 60332-1-2, Oil and Chemical Resistant Properties Enabling Integration into Industrial Facilities with Mineral-Oil Exposure and Alkaline/Acidic Ambient Conditions, Temperature Range −40 to +80°C Fixed Installation / −5 to +70°C Flexible Deployment, 4×D Fixed Bending Radius / 15×D Flexible Installation, Unprecedented Standardized SKU Portfolio Spanning 2 to 61 Core Configurations with Cross-Section Range from 0.5 mm² to 150 mm² per Core Enabling Single-Product Standardization Across Complete Low-Voltage Electrical Distribution Systems, Building Wiring, Outdoor Lighting Distribution, Industrial Control Harnesses, and Cost-Sensitive Multi-Core Cable Applications, RoHS and CE Certified, Engineered for Building Electrical Systems, Outdoor Power and Control Distribution, Municipal and Street Lighting, Industrial Facility Electrical Harnesses, Cost-Sensitive Electrical Distribution, and Global Low-Voltage Installation Markets)
Technical Department
on07/05/2026

GAALFLEX® CONTROL 1000

GAALFLEX® CONTROL 1000: Cost-Optimized UV-Resistant Low-Voltage Industrial Multi-Core Control Cable for Outdoor and Building Electrical Distribution Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PVC Type TI1 Core Insulation, Black (RAL 9005) UV-Resistant PVC Type TM2 Outer Sheath Enabling Indefinite Outdoor Exposure Without Ultraviolet-Induced Embrittlement or Color Degradation, Black Color-Numbered Cores per EN 50334 Standard with Green-Yellow Earth Protection Conductors from 3 Cores, Flame-Retardant and Self-Extinguishing per DIN VDE 0482 EN 50265-2-1 and IEC 60332-1-2, Oil and Chemical Resistant Properties Enabling Integration into Industrial Facilities with Mineral-Oil Exposure and Alkaline/Acidic Ambient Conditions, Temperature Range −40 to +80°C Fixed Installation / −5 to +70°C Flexible Deployment, 4×D Fixed Bending Radius / 15×D Flexible Installation, Unprecedented Standardized SKU Portfolio Spanning 2 to 61 Core Configurations with Cross-Section Range from 0.5 mm² to 150 mm² per Core Enabling Single-Product Standardization Across Complete Low-Voltage Electrical Distribution Systems, Building Wiring, Outdoor Lighting Distribution, Industrial Control Harnesses, and Cost-Sensitive Multi-Core Cable Applications, RoHS and CE Certified, Engineered for Building Electrical Systems, Outdoor Power and Control Distribution, Municipal and Street Lighting, Industrial Facility Electrical Harnesses, Cost-Sensitive Electrical Distribution, and Global Low-Voltage Installation Markets)
1 Min Read
GAALFLEX® CONTROL 500 CP Lean: Advanced EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Harsh Industrial Environments (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PETP Foil Wrapping Plus Overall Tinned Copper Wire Braid Screen Providing ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Grey PUR Special Compound Outer Sheath (RAL 7001) Delivering Superior Oil Resistance
Technical Department
on07/05/2026

GAALFLEX® CONTROL 500 CP Lean

GAALFLEX® CONTROL 500 CP Lean: Advanced EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Harsh Industrial Environments (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PETP Foil Wrapping Plus Overall Tinned Copper Wire Braid Screen Providing ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Grey PUR Special Compound Outer Sheath (RAL 7001) Delivering Superior Oil Resistance
3 Min Read
GAALFLEX® CONTROL 500 P PUR: Advanced Chemical & Oil-Resistant Multi-Core Control Cable for Industrial Machinery (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PUR Polyurethane Special Compound Outer Sheath Providing Superior Oil Resistance, Chemical Immunity, and Abrasion Protection, PVC Type TI2 Core Insulation, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2, Oil-Resistant per DIN VDE 0473 and IEC 60811-2-1, Chemical Resistance to Acids, Alkalis, Organic Solvents, Hydraulic Liquids, Diesel Fuel, and Industrial Cleaning Agents, Abrasion & Cut-Resistant Outer Surface per IEC Standard Mechanical Durability Tests, 4×D Minimum Bending Radius Fixed / 12.5×D Flexible Installation, Multi-Core Architecture with 2 to 25 Core Configurations, 0.75 mm² to 6 mm² Cross-Section Range per Core, Standardized SKU Portfolio (30+ Configurations), Color-Numbered Cores per EN 50334, Optional Notch-Resistant Engineering Available on Request, Engineered for Hydraulic System Control, Industrial Machinery Power Distribution, Chemical Processing Equipment, Automotive Engine Compartment Wiring, Mining Equipment Circuits, Food Processing Control Systems, and Chemical-Exposure-Prone Electrical Distribution): Comprehensive Advanced Chemical-Resistant Cable Architecture Analysis Integrating Polyurethane Compound Chemistry, Oil-Swelling Prevention Mechanisms, Chemical Resistance Molecular Design, Abrasion & Cut-Resistance Material Science, Mechanical Equipment Integration Architecture, Hydraulic System Wiring Specifications, Chemical Processing Equipment Harness Design, Automotive Thermal & Fluid Durability, Mining Extreme-Exposure Cable Engineering, and Next-Generation Chemical-Compliant Electrical Distribution for Industrial Machinery, Hydraulic Systems, Chemical Processing, and Extreme-Fluid-Exposure Manufacturing Environments
Technical Department
on07/05/2026

GAALFLEX® CONTROL 500 P

GAALFLEX® CONTROL 500 P PUR: Advanced Chemical & Oil-Resistant Multi-Core Control Cable for Industrial Machinery (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PUR Polyurethane Special Compound Outer Sheath Providing Superior Oil Resistance, Chemical Immunity, and Abrasion Protection, PVC Type TI2 Core Insulation, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2, Oil-Resistant per DIN VDE 0473 and IEC 60811-2-1, Chemical Resistance to Acids, Alkalis, Organic Solvents, Hydraulic Liquids, Diesel Fuel, and Industrial Cleaning Agents, Abrasion & Cut-Resistant Outer Surface per IEC Standard Mechanical Durability Tests, 4×D Minimum Bending Radius Fixed / 12.5×D Flexible Installation, Multi-Core Architecture with 2 to 25 Core Configurations, 0.75 mm² to 6 mm² Cross-Section Range per Core, Standardized SKU Portfolio (30+ Configurations), Color-Numbered Cores per EN 50334, Optional Notch-Resistant Engineering Available on Request, Engineered for Hydraulic System Control, Industrial Machinery Power Distribution, Chemical Processing Equipment, Automotive Engine Compartment Wiring, Mining Equipment Circuits, Food Processing Control Systems, and Chemical-Exposure-Prone Electrical Distribution): Comprehensive Advanced Chemical-Resistant Cable Architecture Analysis Integrating Polyurethane Compound Chemistry, Oil-Swelling Prevention Mechanisms, Chemical Resistance Molecular Design, Abrasion & Cut-Resistance Material Science, Mechanical Equipment Integration Architecture, Hydraulic System Wiring Specifications, Chemical Processing Equipment Harness Design, Automotive Thermal & Fluid Durability, Mining Extreme-Exposure Cable Engineering, and Next-Generation Chemical-Compliant Electrical Distribution for Industrial Machinery, Hydraulic Systems, Chemical Processing, and Extreme-Fluid-Exposure Manufacturing Environments
11 Min Read
GAALFLEX® CONTROL 500 SY (TR): Advanced Mechanically-Protected Multi-Core Armored Control Cable for Construction Sites and Outdoor Power Distribution (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0482, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Overall Galvanized Steel Wire Braid Armouring for Mechanical Damage Protection and Rodent/Gnawing Immunity, Inner Protective PVC Type TM2 Sheath Separating Conductors from Armouring, Transparent PVC Type TM2 Outer Sheath Enabling Real-Time Cable Status Monitoring and Insulation Condition Assessment, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2 and DIN VDE 0482, Oil-Resistant per IEC 60811-2-1, Water-Resistant per IEC 60811-402, 6×D Minimum Bending Radius Fixed / 20×D Flexible Installation, Multi-Core Architecture with 2 to 61 Core Configurations, 0.5 mm² to 2.5 mm² Cross-Section Range per Core, Standardized SKU Portfolio (45+ Configurations), Color-Numbered Cores per EN 50334, Engineered for Construction Site Temporary Power Distribution, Underground Cable Burial and Trench Deployment, Outdoor Equipment and Machinery Wiring, Drag-Chain and High-Mechanical-Load Routing, Mining and Heavy-Industry Electrical Distribution, Rodent-Proof Cable Protection in Rural Electrification, and Harsh-Environment Mechanical-Damage-Prone Installations): Comprehensive Advanced Rugged Infrastructure Cable Architecture Analysis Integrating Galvanized Steel Wire Braid Mechanical Protection Design, Drag Tensile Strength Engineering, Crushing Resistance and Point-Load Durability, Transparent Status-Monitoring Outer Sheath Technology, Inner Protective Sheath Armouring Separation Strategy, Class 5 Ultra-Flexible Conductor Performance Under Mechanical Stress, Construction Site Temporary Power Integration, Underground Burial and Trench-Laying Specifications, Mining Equipment Power Distribution, Rodent-Resistant Cable Design, and Next-Generation Mechanically-Protected Electrical Distribution for Rugged Construction, Outdoor Infrastructure, Underground Deployment, and Extreme-Mechanical-Stress Industrial Applications
Technical Department
on07/05/2026

GAALFLEX® CONTROL 500 SY (TR)

GAALFLEX® CONTROL 500 SY (TR): Advanced Mechanically-Protected Multi-Core Armored Control Cable for Construction Sites and Outdoor Power Distribution (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0482, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Overall Galvanized Steel Wire Braid Armouring for Mechanical Damage Protection and Rodent/Gnawing Immunity, Inner Protective PVC Type TM2 Sheath Separating Conductors from Armouring, Transparent PVC Type TM2 Outer Sheath Enabling Real-Time Cable Status Monitoring and Insulation Condition Assessment, Flame-Retardant and Self-Extinguishing per IEC 60332-1-2 and DIN VDE 0482, Oil-Resistant per IEC 60811-2-1, Water-Resistant per IEC 60811-402, 6×D Minimum Bending Radius Fixed / 20×D Flexible Installation, Multi-Core Architecture with 2 to 61 Core Configurations, 0.5 mm² to 2.5 mm² Cross-Section Range per Core, Standardized SKU Portfolio (45+ Configurations), Color-Numbered Cores per EN 50334, Engineered for Construction Site Temporary Power Distribution, Underground Cable Burial and Trench Deployment, Outdoor Equipment and Machinery Wiring, Drag-Chain and High-Mechanical-Load Routing, Mining and Heavy-Industry Electrical Distribution, Rodent-Proof Cable Protection in Rural Electrification, and Harsh-Environment Mechanical-Damage-Prone Installations): Comprehensive Advanced Rugged Infrastructure Cable Architecture Analysis Integrating Galvanized Steel Wire Braid Mechanical Protection Design, Drag Tensile Strength Engineering, Crushing Resistance and Point-Load Durability, Transparent Status-Monitoring Outer Sheath Technology, Inner Protective Sheath Armouring Separation Strategy, Class 5 Ultra-Flexible Conductor Performance Under Mechanical Stress, Construction Site Temporary Power Integration, Underground Burial and Trench-Laying Specifications, Mining Equipment Power Distribution, Rodent-Resistant Cable Design, and Next-Generation Mechanically-Protected Electrical Distribution for Rugged Construction, Outdoor Infrastructure, Underground Deployment, and Extreme-Mechanical-Stress Industrial Applications
7 Min Read
GAALFLEX® CONTROL 500 CY: Advanced EMI-Protected Shielded Multi-Core Control Cable for Industrial Automation (450/750 V Nominal, 4 kV Test Voltage per CEI 20-22, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Overall Tinned Copper Braid Screen with PETP Foil Wrapping for Superior Electromagnetic Interference Suppression Across 10 Hz–10 GHz Frequency Range, PVC Type TI1 Core Insulation per CEI 20-11, Marine-Grade PVC Type TM2 Oil-Resistant Outer Sheath per CEI 20-11 and VDE 0207, Flame-Retardant and Self-Extinguishing per CEI 20-22/1, CEI 20-22/2, and Comparable to IEC 60332-3A, Oil-Resistant per CEI 20-34/2-1, Water-Resistant per IEC 60811-402 and EN 50396, 6×D Minimum Bending Radius Fixed / 20×D Flexible Installation, Multi-Core Architecture with 2 to 61 Core Configurations, 0.5 mm² to 6 mm² Cross-Section Range per Core, Standardized SKU Portfolio (60+ Configurations), Color-Numbered Cores per EN 50334, Engineered for Factory Automation Control Systems, Industrial Robot Harness Integration, CNC Machine Tool Wiring, PLC Communication Networks, Servo Motor and Motion-Control Distribution, Fieldbus Protocol Integration (CANopen, PROFINET, EtherCAT, IO-Link), High-Speed Digital Signal Distribution, and Electromagnetic-Compatibility-Mandated Industrial 4.0 Smart Manufacturing Environments): Comprehensive Advanced Industrial Automation Cable Architecture Analysis Integrating Shielding Effectiveness Measurement, Electromagnetic Interference Suppression Mechanics, Tinned Copper Braid Screen Design Optimization, PETP Foil Wrap Integration Strategy, Signal Integrity Engineering for High-Speed Fieldbus Protocols, Class 5 Ultra-Flexible Conductor Performance, Factory Automation and Robotics Integration Architecture, CNC Machine Tool Control Harness Design, Servo and Motion-Control Power Distribution, and Next-Generation EMI-Compliant Electrical Distribution for Industrial 4.0 Smart Manufacturing, Factory Automation, Robotics Integration, High-Speed Motion Control, and Fieldbused Distributed Automation Systems
Technical Department
on07/05/2026

GAALFLEX® CONTROL 500 CY FL OR

GAALFLEX® CONTROL 500 CY: Advanced EMI-Protected Shielded Multi-Core Control Cable for Industrial Automation (450/750 V Nominal, 4 kV Test Voltage per CEI 20-22, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, Overall Tinned Copper Braid Screen with PETP Foil Wrapping for Superior Electromagnetic Interference Suppression Across 10 Hz–10 GHz Frequency Range, PVC Type TI1 Core Insulation per CEI 20-11, Marine-Grade PVC Type TM2 Oil-Resistant Outer Sheath per CEI 20-11 and VDE 0207, Flame-Retardant and Self-Extinguishing per CEI 20-22/1, CEI 20-22/2, and Comparable to IEC 60332-3A, Oil-Resistant per CEI 20-34/2-1, Water-Resistant per IEC 60811-402 and EN 50396, 6×D Minimum Bending Radius Fixed / 20×D Flexible Installation, Multi-Core Architecture with 2 to 61 Core Configurations, 0.5 mm² to 6 mm² Cross-Section Range per Core, Standardized SKU Portfolio (60+ Configurations), Color-Numbered Cores per EN 50334, Engineered for Factory Automation Control Systems, Industrial Robot Harness Integration, CNC Machine Tool Wiring, PLC Communication Networks, Servo Motor and Motion-Control Distribution, Fieldbus Protocol Integration (CANopen, PROFINET, EtherCAT, IO-Link), High-Speed Digital Signal Distribution, and Electromagnetic-Compatibility-Mandated Industrial 4.0 Smart Manufacturing Environments): Comprehensive Advanced Industrial Automation Cable Architecture Analysis Integrating Shielding Effectiveness Measurement, Electromagnetic Interference Suppression Mechanics, Tinned Copper Braid Screen Design Optimization, PETP Foil Wrap Integration Strategy, Signal Integrity Engineering for High-Speed Fieldbus Protocols, Class 5 Ultra-Flexible Conductor Performance, Factory Automation and Robotics Integration Architecture, CNC Machine Tool Control Harness Design, Servo and Motion-Control Power Distribution, and Next-Generation EMI-Compliant Electrical Distribution for Industrial 4.0 Smart Manufacturing, Factory Automation, Robotics Integration, High-Speed Motion Control, and Fieldbused Distributed Automation Systems
11 Min Read
GAALFLEX® CONTROL 500 BH: Advanced European CPR EN 50575 Eca Radiation-Resistant Halogen-Free DIN VDE Color-Coded Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +70°C Fixed Laying / −5 to +70°C Flexible Application, Radiation Resistance 8×10⁷ cJ/kg Ionizing Radiation Durability, Eca Fire Classification per EN 13501-6, Halogen-Free Type TI6/TM7 Insulation and Sheath Formulation with Complete Halogenated-Compound Elimination, DIN VDE 0293-308 / HD 308 S2 / JB/OB Standard Color Identification, IEC 60332-2-1 Single-Cable Flame-Spread Testing, IEC 60332-3-24 Cable-Bundle Flame-Spread Testing, IEC 60754-1 Zero-Halogen Compliance, IEC 60754-2 Zero-Corrosive-Gas Emissions, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Halogen-Free Outer Sheath, DIN VDE Color-Coded Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Architecture with Radiation-Stabilized Polymer Formulation, 4×D Fixed Laying / 12.5×D Flexible Application Bending Radius, 50+ Standardized SKU Configurations Spanning 2–5 Conductor Cores at 0.5–120 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced Nuclear & Medical Radiation-Resistant Control Cable Architecture Analysis Integrating Ionizing-Radiation Polymer Stabilization, Halogenated-Compound Elimination, Fire-Safety Multi-Standard Compliance, Zero-Corrosive-Gas Life-Safety Engineering, DIN VDE Professional Color Identification, Radiation-Hardened Electrical Distribution, Nuclear Facility Instrumentation Protection, Medical Radiation Area Safety Integration, Research Reactor Applications, and Next-Generation Radiation-Resistant European Safety-Critical Electrical Distribution
Technical Department
on30/04/2026

GAALFLEX® CONTROL 500 BH

GAALFLEX® CONTROL 500 BH: Advanced European CPR EN 50575 Eca Radiation-Resistant Halogen-Free DIN VDE Color-Coded Multi-Conductor Control Cable System (300/500 V Nominal, 2 kV Dielectric Proof, −40 to +70°C Fixed Laying / −5 to +70°C Flexible Application, Radiation Resistance 8×10⁷ cJ/kg Ionizing Radiation Durability, Eca Fire Classification per EN 13501-6, Halogen-Free Type TI6/TM7 Insulation and Sheath Formulation with Complete Halogenated-Compound Elimination, DIN VDE 0293-308 / HD 308 S2 / JB/OB Standard Color Identification, IEC 60332-2-1 Single-Cable Flame-Spread Testing, IEC 60332-3-24 Cable-Bundle Flame-Spread Testing, IEC 60754-1 Zero-Halogen Compliance, IEC 60754-2 Zero-Corrosive-Gas Emissions, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, Grey RAL 7001 Halogen-Free Outer Sheath, DIN VDE Color-Coded Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding Architecture with Radiation-Stabilized Polymer Formulation, 4×D Fixed Laying / 12.5×D Flexible Application Bending Radius, 50+ Standardized SKU Configurations Spanning 2–5 Conductor Cores at 0.5–120 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced Nuclear & Medical Radiation-Resistant Control Cable Architecture Analysis Integrating Ionizing-Radiation Polymer Stabilization, Halogenated-Compound Elimination, Fire-Safety Multi-Standard Compliance, Zero-Corrosive-Gas Life-Safety Engineering, DIN VDE Professional Color Identification, Radiation-Hardened Electrical Distribution, Nuclear Facility Instrumentation Protection, Medical Radiation Area Safety Integration, Research Reactor Applications, and Next-Generation Radiation-Resistant European Safety-Critical Electrical Distribution
10 Min Read
GAALFLEX® CONTROL 500 CY Lean: Advanced European CPR EN 50575 Eca EMC-Shielded Multi-Conductor Control Cable System (300/500 V Nominal, 3 kV Dielectric Proof per DIN VDE 0281/HD 21.1, −40 to +80°C Fixed Laying / −5 to +70°C Flexible Application, Eca Fire Classification per EN 13501-6, Integrated Tinned Copper Braid Screen with PETP Foil Wrapping for Superior Electromagnetic Compatibility, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, PVC Type TI1 Insulation, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding with Integrated Shielding, Dual Bending-Radius Specification: 6×D Fixed Laying / 20×D Flexible Application, Oil-Resistant per DIN EN 50290-2-22 / VDE 0819-102 TM54, 50+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–4.0 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Industrial EMC-Control Cable Architecture Analysis Integrating Tinned Copper Braid Screening Technology, PETP Foil Electromagnetic Shielding, VFD and Servo-Motor Interference Suppression, Industrial Control System EMC Requirements, EN 50575 Low-Smoke Chemistry, Eca Fire-Reaction Compliance, Multi-Conductor Shielded Stranding Engineering, Oil-Resistant PVC Formulation, and Next-Generation EMC-Critical Industrial Control Distribution
Technical Department
on30/04/2026

GAALFLEX® CONTROL 500 CY Lean

GAALFLEX® CONTROL 500 CY Lean: Advanced European CPR EN 50575 Eca EMC-Shielded Multi-Conductor Control Cable System (300/500 V Nominal, 3 kV Dielectric Proof per DIN VDE 0281/HD 21.1, −40 to +80°C Fixed Laying / −5 to +70°C Flexible Application, Eca Fire Classification per EN 13501-6, Integrated Tinned Copper Braid Screen with PETP Foil Wrapping for Superior Electromagnetic Compatibility, Class 5 Flexible Bare Red Copper Conductor per IEC 60228 / DIN VDE 0295, PVC Type TI1 Insulation, Grey Outer Sheath RAL 7001 Standard, EN 50334 Sequential Black-Numbered Cores with Green/Yellow Protective Earth from 3 Cores Onward, Layered Stranding with Integrated Shielding, Dual Bending-Radius Specification: 6×D Fixed Laying / 20×D Flexible Application, Oil-Resistant per DIN EN 50290-2-22 / VDE 0819-102 TM54, 50+ Standardized SKU Configurations Spanning 2–61 Conductor Cores at 0.5–4.0 mm² Cross-Sections, CPR UE 305/11 Certification Compliant, RoHS and CE Approved): Comprehensive Advanced European Industrial EMC-Control Cable Architecture Analysis Integrating Tinned Copper Braid Screening Technology, PETP Foil Electromagnetic Shielding, VFD and Servo-Motor Interference Suppression, Industrial Control System EMC Requirements, EN 50575 Low-Smoke Chemistry, Eca Fire-Reaction Compliance, Multi-Conductor Shielded Stranding Engineering, Oil-Resistant PVC Formulation, and Next-Generation EMC-Critical Industrial Control Distribution