[email protected]

yellow sheath

16 Min Read
飞纯 Type 441 是一种依据 AS/NZS 2802:2000 设计的 Class 2 矿用卷筒与拖曳电缆， 额定电压为 1.1/1.1KV。 该系列面向多种矿山移动供电用途。 与只强调拖曳或只强调卷筒运行的电缆不同， Type 441 明确适用于 拖曳应用和卷筒收放应用。 Type 441 在电缆中心设置一根可伸长 Pilot， 同时采用半导电 PCP 托架支撑三根动力线芯。 这一支撑结构有助于
Technical Department
on23/06/2026

O que é o FG7ORPu TUNNELFLEX 0,6/1KV: Análise de Engenharia Aprofundada do Cabo Flexível de Poliuretano para Mineração e Tunelamento

O FG7ORPu TUNNELFLEX 0,6/1KV é um cabo flexível de baixa tensão projetado para a alimentação de equipamentos móveis com alto risco de dano mecânico em mineração e tunelamento. Sua característica definidora é a combinação de uma isolação XLPE de composto especial com uma bainha externa de poliuretano (PUR) resistente à abrasão, ao rasgo e — de modo notável — à hidrólise, sobre condutores de cobre nu classe 5 de construção especial para serviço móvel. É um cabo concebido para ser defletido em um único plano, a velocidades de até 60 m/min, em aplicações como sistemas de festão, esteiras de cabo e o avanço de tuneladoras (TBM) e máquinas móveis, onde a água, a abrasão da rocha e a flexão contínua atuam ao mesmo tempo.
9 Min Read
LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable
Technical Department
on16/06/2026

NSHCGEÖU KON+ST+ÜL для общего применения: тяжёлый кабель 0,6/1 kV для мобильных шахтных машин, контроля повреждений и вспомогательных цепей

NSHCGEÖU KON+ST+ÜL — это тяжёлый эластомерный кабель для подключения мобильных машин с очень высокой механической нагрузкой. По предоставленным данным он особенно применяется в шахтах для coal cutting and loading machines, а также для питания аппаратов, устройств и auxiliary electrical circuits. Конструкция объединяет три силовые жилы, двойные концентрические контрольные жилы, monitoring core, GM1b внутреннюю оболочку, гибкую броню из лужёных медных и оцинкованных стальных проволок, а также тяжёлую наружную оболочку 5GM5 жёлтого или красного цвета.
7 Min Read
Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables for port equipment, container terminals, and offshore platforms — from conductor architecture and EPR insulation to steel wire armour (M2) design rationale, galvanic corrosion protection mechanisms, environmental compliance, and validated performance benchmarking against Nexans Eproneo Port and Prysmian marine systems.
Technical Department
on16/06/2026

(N)SSHCÖU для общего применения: экранированный кабель 0,6/1 kV для двигателей с частотным преобразователем в горной добыче и тоннелях

(N)SSHCÖU — это тяжёлый эластомерный кабель с лужёными медными жилами класса 5, изоляцией 3GI3, защитными PE-проводниками, разделёнными на три части, концентрической оплёткой из лужёной меди, внутренней оболочкой GM1b и наружной оболочкой 5GM5. По предоставленным техническим данным кабель подходит для стационарной прокладки и гибкой эксплуатации в качестве motor power supply cable для приводов, управляемых частотными преобразователями, в mining and tunneling applications.
6 Min Read
FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)
Technical Department
on15/06/2026

TUNNELFLEX-PUR / TUNNELFLEX-R/PUR 0,6/1 kV — гибкий силовой кабель для шахт, тоннелей и мобильного оборудования

TUNNELFLEX-PUR и TUNNELFLEX-R/PUR предназначены для питания мобильного оборудования в горнодобывающей промышленности и тоннельном строительстве. Кабель рассчитан на тяжёлые условия, где присутствует высокий риск механического повреждения, истирания и разрыва наружной оболочки. Конструкция применяется там, где кабель отклоняется преимущественно в одной плоскости. Максимальная скорость движения — 60 м/мин.