BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in hoisting control cable design, specifically engineered for next-generation automated port crane systems operating under extreme environmental and operational constraints. Unlike the BASKET SPREADER 740's 300/500V AC specification, the 750 operates at 0.6/1kV AC with dual-voltage DC capability (0.9/1.8 kV)—a classification shift that enables: Higher power capacity – 2–3× greater amperage per conductor, enabling longer cable runs with lower voltage drop Medium-voltage infrastructure compatibility – Direct integration with port substation power distribution systems (0.6 kV = 600V three-phase industrial standard) DC dual-voltage operation – Simultaneous support for AC motor control and DC feedback/signaling circuits (0.9/1.8 kV DC margins) Extreme temperature capability – Operating range −50°C to +80°C (vs. SPREADER 740's −20°C to +60°C), addressing Arctic port terminals and tropical high-ambient scenarios Advanced insulation chemistry – GAALTHERM® 530 thermoplastic compound replaces standard PVC/PUR, delivering superior chemical resistance and thermal stability This cable bridges the gap between standard control cables (300/500V, limited temperature) and heavy industrial medium-voltage distribution cables, creating a purpose-built solution for modern automated gantry crane systems in global port terminals.

on17/06/2026

DR 730 P Highflex: высокогибкий барабанный кабель PUR/TMPU с UL/cUL AWM Style 21897 для тяжёлых динамических применений

DR 730 P Highflex — это высокогибкий барабанный кабель для тяжёлых механизмов и оборудования с высокими механическими нагрузками. Он применяется для моторных кабельных барабанов, подъёмников, транспортных систем, подвижных двигателей и сельскохозяйственных транспортных средств. Кабель имеет признание UL Style 21897, признание cUL, маркировку AWM I/II A/B 80°C 600V FT1 FT2, номинальное напряжение DIN VDE Uo/U 0,6/1 kV, напряжение UL 1000 V и напряжение cUL 600 V.

UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.

Technical Department

on17/06/2026

DR 720 P Highflex: высокогибкий барабанный кабель PUR/TMPU для тяжёлых механизмов, подъёмников, транспортных систем и подвижных двигателей

DR 720 P Highflex — это высокогибкий барабанный кабель для тяжёлых потребителей и оборудования с высокими механическими нагрузками. Он применяется, например, для моторных кабельных барабанов, подъёмников, транспортных систем, подвижных двигателей и сельскохозяйственных транспортных средств. Кабель рассчитан на номинальное напряжение Uo/U 0,6/1 kV, имеет оболочку PUR/TMPU, центральный несущий элемент, поддерживающий экран из высокотехнологичной нити и конструкцию, рассчитанную на интенсивную намотку и размотку.

LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable

Technical Department

on17/06/2026

DR 717 P Highflex: высокогибкий барабанный кабель PUR/TMPU для пружинных кабельных барабанов на сценах и в театрах

DR 717 P Highflex — это высокогибкий кабель для пружинных кабельных барабанов, применяемых на сценах и в театрах. Кабель разработан для намотки и размотки, имеет специально подобранную послойную скрутку вокруг центрального несущего элемента, оболочку PUR/TMPU, поддерживающий экран из высокотехнологичной нити, малый наружный диаметр, небольшой вес и высокую механическую стойкость.

Technical Department

on17/06/2026

DR 718 CP Highflex Reeling Cable: экранированный высокогибкий PUR/TMPU кабель для spring cable reels, театральных сцен и крановых стрел

DR 718 CP Highflex — это reeling cable with overall copper screen для spring cable reels, например на сценах в театрах, а также для применения как control cable in crane arms. Кабель имеет жилы из bare copper strands class 5, special polymer insulation, специально подобранную скрутку вокруг центрального несущего элемента, PUR/TMPU inner sheath, tinned copper braiding screen и чёрную PUR/TMPU outer sheath RAL 9005.

The nominal outer diameter (OD) of a LAPP ÖLFLEX CLASSIC 100 4G16 flexible industrial power cable (Article number 00101123) is exactly 20.4 millimeters (0.804 inches), with a standard tolerance of ±0.3 millimeters, producing acceptable cables measuring 20.1 to 20.7 millimeters in outer diameter. This four-conductor cable configuration consists of three active power conductors (black, brown, and grey color-coded per VDE 0293-308) plus one green-yellow dual-color protective earth/ground conductor, each having a cross-sectional area of 16 square millimeters, providing a total copper conductor mass of approximately 614 kilograms per kilometer. The complete assembled cable, including PVC insulation around each conductor, tinned copper braid shielding (in shielded variants), and the grey RAL 7001 PVC outer protective sheath, weighs approximately 1,087 kilograms per kilometer under normal atmospheric conditions. When properly coiled on a standard industrial reel, a single 100-meter length of this cable weighs approximately 108.7 kilograms, a 500-meter drum weighs approximately 544 kilograms, and a full 1-kilometer supply spool weighs approximately 1,087 kilograms—specifications essential for facility material handling planning and equipment procurement. This cable is designed specifically for industrial power distribution, flexible machinery connections, HVAC system wiring, and wind turbine generator (WTG) applications where robust electrical performance, mechanical durability, and standards compliance are non-negotiable requirements.

Technical Department

on04/03/2026

Outer Diameter Specs: Dimensions and Weight for LAPP ÖLFLEX CLASSIC 100 4G16 Power Cable

The nominal outer diameter (OD) of a LAPP ÖLFLEX CLASSIC 100 4G16 flexible industrial power cable (Article number 00101123) is exactly 20.4 millimeters (0.804 inches), with a standard tolerance of ±0.3 millimeters, producing acceptable cables measuring 20.1 to 20.7 millimeters in outer diameter. This four-conductor cable configuration consists of three active power conductors (black, brown, and grey color-coded per VDE 0293-308) plus one green-yellow dual-color protective earth/ground conductor, each having a cross-sectional area of 16 square millimeters, providing a total copper conductor mass of approximately 614 kilograms per kilometer. The complete assembled cable, including PVC insulation around each conductor, tinned copper braid shielding (in shielded variants), and the grey RAL 7001 PVC outer protective sheath, weighs approximately 1,087 kilograms per kilometer under normal atmospheric conditions. When properly coiled on a standard industrial reel, a single 100-meter length of this cable weighs approximately 108.7 kilograms, a 500-meter drum weighs approximately 544 kilograms, and a full 1-kilometer supply spool weighs approximately 1,087 kilograms—specifications essential for facility material handling planning and equipment procurement. This cable is designed specifically for industrial power distribution, flexible machinery connections, HVAC system wiring, and wind turbine generator (WTG) applications where robust electrical performance, mechanical durability, and standards compliance are non-negotiable requirements.

N3GHSSYCY — это экранированный высоковольтный гибкий кабель промышленного класса, специально разработанный для подключения мобильного оборудования в шахтах и подземных выработках со взрывоопасной средой. Кабель соответствует международному стандарту DIN VDE 0250, часть 605 и выпускается в двух номинальных напряжениях: 3.6/6 кВ и 6/10 кВ. Особенностью конструкции является наличие фазоконцентрического заземляющего проводника и общего концентрического экрана мониторинга, которые в сочетании со схемой высоковольтной защиты позволяют контролировать кабель на наличие дефектов изоляции и повреждений от внешних воздействий.

Technical Department

on24/01/2026

Tinned Copper Conductors in Rubber Cables vs. Bare Copper in PVC Cables: A Technical Analysis of VDE Standards and Material Chemistry

In the specialized world of industrial cable manufacturing, the choice between tinned copper and bare copper conductors represents a critical engineering decision driven by material chemistry, environmental conditions, and international standards. The German VDE (Verband der Elektrotechnik, Elektronik und Informationstechnik) standards provide particularly stringent requirements for cable construction, and understanding why these standards mandate tinned copper conductors for rubber-insulated cables while permitting bare copper for PVC-insulated cables reveals fundamental principles of cable engineering and materials science.