[email protected]

roadheader cable

14 Min Read
Comprehensive technical breakdown of OnGbit TF Kable 3.6/6kV underground mining cable for roadheaders, TBM, shaft sinking in coal mines, potash mines, tunnel excavation: dynamic trailing under high tensile load 500–1500 kg, scarp rock abrasion, high humidity with condensation, semi-conductive screens prevent corona discharge at 6kV, splitted earth (PE, N, GND) + pilot core enable selective protection relay operation upon sheath damage, flame-retardant RPШ-1 outer sheath (Russian mine safety rules), self-extinguishing design meets ATEX directive (explosion-proof EU standard). Nomenclature: O=Sheath, n=flame-retardant, G=rubber insulation, bit=mining-specific underground. FeiChun SHD-GC 8kV and Russian КГЭШ 6kV — verified alternatives with premium flame-retardants, MSHA-equivalent testing, and IEC 60332 compliance for coal and potash mining operations.
Technical Department
on17/03/2026

Шахтный кабель OnGbit (TF Kable): Полный разбор высоковольтного кабеля 3.6/6kV для проходческих комбайнов и туннелестроения — замены для российских угольных шахт, калийных рудников, туннельных выработок

Comprehensive technical breakdown of OnGbit TF Kable 3.6/6kV underground mining cable for roadheaders, TBM, shaft sinking in coal mines, potash mines, tunnel excavation: dynamic trailing under high tensile load 500–1500 kg, scarp rock abrasion, high humidity with condensation, semi-conductive screens prevent corona discharge at 6kV, splitted earth (PE, N, GND) + pilot core enable selective protection relay operation upon sheath damage, flame-retardant RPШ-1 outer sheath (Russian mine safety rules), self-extinguishing design meets ATEX directive (explosion-proof EU standard). Nomenclature: O=Sheath, n=flame-retardant, G=rubber insulation, bit=mining-specific underground. FeiChun SHD-GC 8kV and Russian КГЭШ 6kV — verified alternatives with premium flame-retardants, MSHA-equivalent testing, and IEC 60332 compliance for coal and potash mining operations.
10 Min Read
The selection of appropriate submersible pump cables for acidic mine water dewatering applications represents a critical engineering decision that directly impacts operational safety, equipment longevity, and maintenance costs. While Type 441 cables may appear suitable for general submersible pump applications, the harsh chemical environment of acidic mine water typically necessitates the use of specialized EPR (Ethylene Propylene Rubber) or CSP (Chlorosulfonated Polyethylene) insulated cables specifically engineered for corrosive conditions. 为酸性矿井水脱水应用选择合适的潜水泵电缆是一项关键的工程决策，直接影响运行安全、设备寿命和维护成本。虽然441型电缆可能适用于一般潜水泵应用，但酸性矿井水的恶劣化学环境通常需要使用专门设计用于腐蚀性条件的EPR（乙丙橡胶）或CSP（氯磺化聚乙烯）绝缘电缆。
Technical Department
on05/02/2026

TUNNELFLEX-R-PUR HF with Antitwisting Protection 1 KV

TUNNELFLEX-R-PUR HF represents a specialized category of halogen-free, flame-retardant flexible power cables engineered specifically for the demanding requirements of underground mining and tunneling operations. This cable combines advanced polyurethane (PUR) sheathing technology with integrated antitwisting protection to deliver exceptional mechanical durability, environmental resistance, and most importantly, enhanced safety through its halogen-free construction that significantly reduces toxic gas emissions during fire incidents. TUNNELFLEX-R-PUR HF电缆是专为地下采矿和隧道作业的苛刻要求而设计的无卤阻燃柔性电力电缆。该电缆结合了先进的聚氨酯护套技术和集成的防扭转保护，提供卓越的机械耐久性、环境抵抗力，以及通过无卤结构在火灾事故中显著减少有毒气体排放的增强安全性。
8 Min Read
MYP cables must obtain MA (煤安) certification before they can be legally used in Chinese coal mines. The MA mark, administered by the National Coal Mine Safety Mark Office (煤矿安全标志办公室), represents mandatory safety certification for all underground coal mining equipment and materials. MYP cables, as mobile power supply cables for coal mining machinery, fall under the strictly regulated product categories defined in the Mining Product Safety Sign Management Catalog and must comply with Chinese national standards MT 818 series and GB 12972.[1][2] 是的，MYP电缆在中国煤矿使用前必须获得MA（煤安）认证。由国家煤矿安全标志办公室管理的MA标志，代表了所有井下煤矿设备和材料的强制性安全认证。MYP电缆作为煤矿机械的移动电源电缆，属于《矿用产品安全标志管理目录》中严格管制的产品类别，必须符合中国国家标准MT 818系列和GB 12972。
Technical Department
on28/01/2026

MA Certificate: MYP Cable Certification for Chinese Coal Mines

MYP cables must obtain MA (煤安) certification before they can be legally used in Chinese coal mines. The MA mark, administered by the National Coal Mine Safety Mark Office (煤矿安全标志办公室), represents mandatory safety certification for all underground coal mining equipment and materials. MYP cables, as mobile power supply cables for coal mining machinery, fall under the strictly regulated product categories defined in the Mining Product Safety Sign Management Catalog and must comply with Chinese national standards MT 818 series and GB 12972.[1][2] 是的，MYP电缆在中国煤矿使用前必须获得MA（煤安）认证。由国家煤矿安全标志办公室管理的MA标志，代表了所有井下煤矿设备和材料的强制性安全认证。MYP电缆作为煤矿机械的移动电源电缆，属于《矿用产品安全标志管理目录》中严格管制的产品类别，必须符合中国国家标准MT 818系列和GB 12972。
5 Min Read
PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV is a coal cutter cable designed for free trailing operations in underground mining applications, used as power supply connection cable for mobile equipment such as coal shearers, roadheaders, TBMs, or scoops (LHDs). The (Z) Coal-Cutter cables are specifically designed for free trailing operation and, due to their special galvanized steel wire braiding construction, may be trailed for considerable distances behind the machine during operation. Features very finely stranded tinned copper conductors (Class FS), EPR rubber insulation (PROTOLON 3GI3), galvanized steel wire braiding armour, and polychloroprene (PCP) outer sheath (PROTOFIRM 5GM5). Offers up to 36,000N tensile strength and 150m/min travel speed. Certified by MSHA P-189-4, EAC, and Bosnia-Herzegovina BAS.
Technical Department
on14/01/2026

كابل PROTOMONT(Z) NSSHKCGEOEU 0,6/1KVكابلات قاطعات الفحم لعمليات السحب الحر – التعدين تحت الأرض

PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV 是專為地下採礦作業中的自由拖曳操作設計的採煤機電纜，用於連接採煤機、掘進機、隧道掘進機(TBM)或鏟運機(LHD)等移動設備。(Z)型採煤機電纜專為自由拖曳操作設計，由於其特殊的鍍鋅鋼絲編織結構，可在設備後方拖曳相當長的距離。該電纜採用極細絞鍍錫銅導體（FS類）、EPR橡膠絕緣（PROTOLON 3GI3）、鍍鋅鋼絲編織鎧裝、氯丁橡膠外護套（PROTOFIRM 5GM5）。具有高達36,000N的拉伸強度和150m/min的移動速度。獲得MSHA P-189-4、EAC及波黑BAS等國際認證。
4 Min Read
High-performance polyurethane sheathed flexible power cables for mining and tunneling applications. Available in two variants: standard version without anti-twisting protection (TUNNELFLEX-PUR) and enhanced version with synthetic mesh anti-twisting protection (TUNNELFLEX-R/PUR).
Technical Department
on23/12/2025

What is TUNNELFLEX-PUR&TUNNELFLEX-R/PUR 0.6/1kV Cable?

TUNNELFLEX-PUR and TUNNELFLEX-R/PUR are specialized 0.6/1kV flexible power cables engineered for mining and tunneling applications. These cables provide reliable power supply to mobile equipment operating in harsh underground environments where there is a high risk of mechanical damage. The TUNNELFLEX cable series is suitable for applications where it is deflected in one plane only, with a maximum operating speed of 60 m/min.
4 Min Read
FG7ORPu-TUNNELFLEX is a specialized 0.6/1kV flexible power cable engineered specifically for mining and tunneling applications. This cable provides reliable power supply to mobile equipment operating in harsh underground environments where there is a high risk of mechanical damage. The TUNNELFLEX cable is suitable for applications where it is deflected in one plane only, with a maximum operating speed of 60 m/min.
Technical Department
on23/12/2025

What is FG7ORPu-TUNNELFLEX 0.6/1kV Cable?

FG7ORPu-TUNNELFLEX is a specialized 0.6/1kV flexible power cable engineered specifically for mining and tunneling applications. This cable provides reliable power supply to mobile equipment operating in harsh underground environments where there is a high risk of mechanical damage. The TUNNELFLEX cable is suitable for applications where it is deflected in one plane only, with a maximum operating speed of 60 m/min.
7 Min Read
PROTOMONT TBM (N)TSCGECWOEU 6/10KV represents the pinnacle of medium voltage reeling cable technology specifically engineered for Tunnel Boring Machines (TBMs). As documented in professional reeling cable technical resources[1], these specialized cables serve as the critical power supply lifeline for TBM operations in underground mines and tunnel construction sites, enabling continuous boring operations while accommodating the machine's forward progression through the cable reeling system.
Technical Department
on18/12/2025

What is PROTOMONT TBM (N)TSCGECWOEU 6/10KV TBM Reeling Cable?

PROTOMONT TBM (N)TSCGECWOEU 6/10KV represents the pinnacle of medium voltage reeling cable technology specifically engineered for Tunnel Boring Machines (TBMs). As documented in professional reeling cable technical resources[1], these specialized cables serve as the critical power supply lifeline for TBM operations in underground mines and tunnel construction sites, enabling continuous boring operations while accommodating the machine’s forward progression through the cable reeling system.
4 Min Read
PROTOMONT(Z) NSSHCGEOEU 0.6/1KV coal cutter cable represents the pinnacle of engineering for underground mining operations. These cables are specifically designed as power supply connection cables for mobile equipment in underground machine applications. (Z)-Coal-Cutter cables are engineered for free trailing operation and, due to their special construction, may be trailed for considerable distances behind the machine during operation. The robust design ensures reliable power transmission even under extreme mechanical stress conditions encountered in mining environments. Primary applications include coal shearers, roadheaders, tunnel boring machines (TBMs), and load-haul-dump vehicles (LHDs/scoops). The cable's exceptional flexibility and durability make it indispensable for modern mining operations worldwide.
Technical Department
on15/12/2025

PROTOMONT(Z) NSSHCGEOEU0.6/1KV Coal Cutter Cables

PROTOMONT(Z) NSSHCGEOEU 0.6/1KV coal cutter cable represents the pinnacle of engineering for underground mining operations. These cables are specifically designed as power supply connection cables for mobile equipment in underground machine applications. (Z)-Coal-Cutter cables are engineered for free trailing operation and, due to their special construction, may be trailed for considerable distances behind the machine during operation. The robust design ensures reliable power transmission even under extreme mechanical stress conditions encountered in mining environments. Primary applications include coal shearers, roadheaders, tunnel boring machines (TBMs), and load-haul-dump vehicles (LHDs/scoops). The cable’s exceptional flexibility and durability make it indispensable for modern mining operations worldwide.
3 Min Read
PROTOMONT(Z) NSSHKCGEOEU represents a highly specialized category of coal cutter cables engineered for free trailing operation in underground mining environments. The "(Z)" designation indicates this cable is specifically designed for trailing applications, where it must be trailed for considerable distances behind mobile mining machinery during operation. Unlike standard industrial cables, these are constructed to withstand extreme mechanical stresses including repeated bending, high tensile forces, impact, and crushing loads commonly encountered in coal mining operations.
Technical Department
on15/12/2025

PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV Coal Cutter Cables for Trailing Operations

PROTOMONT(Z) NSSHKCGEOEU represents a highly specialized category of coal cutter cables engineered for free trailing operation in underground mining environments. The “(Z)” designation indicates this cable is specifically designed for trailing applications, where it must be trailed for considerable distances behind mobile mining machinery during operation. Unlike standard industrial cables, these are constructed to withstand extreme mechanical stresses including repeated bending, high tensile forces, impact, and crushing loads commonly encountered in coal mining operations.
12 Min Read
BS 6708 Type 11 Trailing Cable
Technical Department
on17/11/2025

What is BS 6708 Type 11 Trailing Cable?

BS 6708 Type 11 Trailing Cable represents a pinnacle of electrical engineering specifically designed for the demanding conditions of underground coal mining and surface quarrying operations. This specialized cable serves as the electrical lifeline for coalface cutters, shuttle cars, and similar face equipment, where reliability and safety are non-negotiable requirements.