[email protected]

hazardous area cable

3 Min Read
H07RN-F: Advanced High-Flexibility Salt-Fog Resistant Port Cable Engineering Solution Specialized rubber-sheathed electrical cable engineered for extreme maritime and coastal port environments. H07RN-F combines superior mechanical flexibility (4×D minimum fixed-laying bending radius, 6×D flexible-application capability) with comprehensive salt-fog environmental resistance, enabling reliable 450/750V power distribution and control signaling in container gantry systems, ship loaders, and port automation infrastructure where conventional cables fail within 6–12 months of deployment.
Technical Department
on22/06/2026

机械设备出口欧俄总是卡关？飞纯电缆自带 CE+EAC+俄罗斯FSC，助你一站式通关！

机械设备出口欧盟、俄罗斯及欧亚市场，真正的难点往往不只在整机本体，而在整机内部那些容易被忽视的关键配套部件。电缆作为动力传输、控制信号、移动供电、安全联锁和消防风险控制的重要载体，一旦认证文件不完整、标识不匹配、消防证明缺失或与整机技术资料不一致，就可能成为清关、入库、项目验收和现场投运的卡点。飞纯电缆自带 CE、EAC 与俄罗斯 FSC 消防认证，以“欧盟合规 + 欧亚准入 + 俄罗斯消防”的组合能力，为机械设备出口提供更完整的一站式通关解决方案。
3 Min Read
Spreader Bar Cable Application: What is a spreader bar? Container crane context: Gantry crane positioned at dock Overhead hoist mechanism: Winch + trolley system Spreader bar: Attachment point below hoist Function: Grips container corners, distributes load, tilts container for placement Spreader bar structure: Framework: Steel tubes/beams forming rectangular frame Lifting points: 4 corner attachment rings (one per container corner) Electrical system: Motor-driven locks, position sensors, lighting Cables: Power supply for motors + control signals for locking mechanism Cable location (spreader bar): Vertical run (primary): From crane hoist (top) down 20–40 m to spreader bar (bottom) Function: Supply power for: - Corner lock solenoids (release container locks) - Position feedback sensors (confirm locks engaged) - Optional: Spreader bar lighting (visibility during operation) Simultaneous function: Act as partial mechanical support (share load with main hoist cable) Horizontal distribution (on spreader bar): From entry point distributed across spreader frame Supply all four corner lock motors Branching: May split into smaller branches (4× circuits to corners) Mechanical load: Cable must withstand: Static tension: Weight of container payload (20–40 tons distributed) Dynamic loads: Jerking during load acceleration, swinging in wind Thermal: Tropical port environment, direct sun, saltwater spray Abrasion: Rubbing against spreader frame during operation Cable design philosophy: Dual function (unique): Electrical function: Deliver 300/500V power for locking system Mechanical function: Share load-bearing (not primary structure, but support role) Different from: Pure electrical cables (festoon, lifting): Electrical function only Pure mechanical ropes: Mechanical function only BASKET SPREADER 730: Both functions integrated Speed specification rationale: 160 m/min (relatively slow): Container crane cycle time: ~45–60 seconds per lift Descent distance: 20–40 m Descent speed: 20–40 m ÷ 45–60 sec = 0.33–0.9 m/s = 20–54 m/min Average speed: ~30 m/min (loading) + 20 m/min (discharge) = 25 m/min 160 m/min specification: 6–8× safety margin on speed Design: Allows for fast emergency ascent if needed Why not higher speed? Mechanical load constraint: Heavy cable (4000 N = ~400 kg equivalent) Inertia: Accelerating 400 kg + spreader bar + container inertia takes time Structural: Crane frame limits acceleration rates (safety interlocks) Result: 160 m/min is practical maximum for loaded spreader bar
Technical Department
on22/06/2026

从欧盟到俄罗斯：飞纯风电电缆斩获 ATEX、IECEx 防爆与俄罗斯 FSC 消防双重硬核认证！

全球风电项目正在进入更严苛的安全合规时代。风机大型化、应用区域国际化、能源场景复合化，使风电电缆承担的责任远不止电力传输。它既要承受塔筒扭转、机舱振动、偏航运动、低温、潮湿、盐雾和油污等复杂环境，也要满足不同市场对防爆、防火、清关、验收和项目归档的高标准要求。飞纯风电电缆斩获 ATEX、IECEx 防爆认证与俄罗斯 FSC 消防认证，以“防爆 + 防火 + 国际合规”的硬核组合，为欧盟、国际工程和俄罗斯风电项目提供高安全等级电缆解决方案。
21 Min Read
Полный технический анализ специализированного морозостойкого кабеля RHEYFIRM (N)TSCGEWÖU-K компании Feichun для портовых систем Дальнего Востока России (Хабаровск, Владивосток, Петропавловск-Камчатский, Магадан) и Арктических регионов. Кабель соответствует ХЛ-60 (холодостойкость до -50°C) с гарантированной гибкостью и механическим ресурсом в условиях ледяной среды, трёхжильная конфигурация 3×120 мм² (три фазы 380 В) + 3×70 мм² (трёхжильное заземление/нейтраль) для высокомощных портовых лебёдок. Номинальное напряжение 1000 В переменного тока, морская защита класса C5-M (720 часов солевого тумана при -40°C), испытание на холодное растяжение ХЛ-60 (≥350% удлинение при -40°C), механический ресурс 30+ млн циклов даже в криогенных условиях, удлинение при разрыве 320–420%, отсутствие хрупкого разрушения при экстремальном охлаждении, сертификация ГОСТ 22483-2012 (ХЛ), IEC 60245-2, DNV, ABS. Совокупная экономия владения 35–45% по сравнению с европейскими альтернативами благодаря оптимизации под российские стандарты и климат.
Technical Department
on02/06/2026

(N)SHTÖU Reeling Cable | −60°C Arctic Rated | VDE 0250 | EAC Ex & GOST Fire | Russia Export

An engineering-grade technical reference for Arctic mining equipment OEMs, resource-extraction operations in Siberian and sub-Arctic regions, liquefied-natural-gas (LNG) facility equipment manufacturers, and electrical system designers specifying trailing and reeling cables for permanent operation at extreme low temperatures in the Russian Federation and EAEU Arctic territories. This document explains the materials science and electrical engineering behind extreme-temperature cable design, documents the field-performance advantages of cryogenic-rated construction versus conventional cables, details the EAC Ex intrinsic-safety certification pathway that enables safe operation in explosive atmospheres (coal mines, natural-gas facilities), and establishes the pre-certification framework for seamless Russian Arctic export and deployment.
10 Min Read
FeiChun TROMMELFLEX PUR-HF D12Y11YU11Y: Advanced Halogen-Free Flame-Retardant Low-Voltage Reeling Cable with 50-Meter Diving-Depth Water-Immersion Capability, Polyurethane-Based Halogen-Free Insulation and Sheath System Providing Superior Fire Safety and Environmental Compliance, Class 5 Flexible Copper Conductor Architecture Exceeding DIN VDE 0295 Flexibility Standards, 180 m/min High-Speed Reeling Certification for Port Gantry and Automated Systems, ATEX/IECEx Hazardous-Area Explosion-Proof Compliance for Petrochemical Facilities, Thermomechanical Stress Tolerance Across −40°C to +80°C Operating Range, Dynamic Tensile-Load Optimization (Permanent 25 N/mm², Short-Circuit 250°C), Water-Resistant Polyurethane Multi-Layer Sheath Providing Continuous Subsea Operation Capability, Toxic-Fume Suppression Through Halogen-Free Polymer Chemistry, Fire-Propagation Resistance Exceeding IEC 60332-1 Flame-Retardant Testing, Environmental Health & Safety Compliance for Restricted-Substance-Regulation Standards (RoHS, REACH), Comprehensive Field Performance Validation from 100+ Global Port Terminals, Diving Operations, and Offshore Subsea Installations Over 10–15 Years, and Complete Technical Justification for Advanced Halogen-Free Cable Specification in Port Operations and Hazardous-Area Power Distribution Where Fire Safety, Environmental Compliance, and Mechanical Durability Must Coexist
Technical Department
on25/04/2026

TROMMELFLEX PUR-HF D12Y11YU11Y

FeiChun TROMMELFLEX PUR-HF D12Y11YU11Y: Advanced Halogen-Free Flame-Retardant Low-Voltage Reeling Cable with 50-Meter Diving-Depth Water-Immersion Capability, Polyurethane-Based Halogen-Free Insulation and Sheath System Providing Superior Fire Safety and Environmental Compliance, Class 5 Flexible Copper Conductor Architecture Exceeding DIN VDE 0295 Flexibility Standards, 180 m/min High-Speed Reeling Certification for Port Gantry and Automated Systems, ATEX/IECEx Hazardous-Area Explosion-Proof Compliance for Petrochemical Facilities, Thermomechanical Stress Tolerance Across −40°C to +80°C Operating Range, Dynamic Tensile-Load Optimization (Permanent 25 N/mm², Short-Circuit 250°C), Water-Resistant Polyurethane Multi-Layer Sheath Providing Continuous Subsea Operation Capability, Toxic-Fume Suppression Through Halogen-Free Polymer Chemistry, Fire-Propagation Resistance Exceeding IEC 60332-1 Flame-Retardant Testing, Environmental Health & Safety Compliance for Restricted-Substance-Regulation Standards (RoHS, REACH), Comprehensive Field Performance Validation from 100+ Global Port Terminals, Diving Operations, and Offshore Subsea Installations Over 10–15 Years, and Complete Technical Justification for Advanced Halogen-Free Cable Specification in Port Operations and Hazardous-Area Power Distribution Where Fire Safety, Environmental Compliance, and Mechanical Durability Must Coexist
19 Min Read
SWA Cable Architecture & Engineering Design Strategy Purpose & Application Scope: Steel Wire Armored (SWA) cables represent the engineering solution for power distribution where mechanical protection, fire safety, and environmental resistance create absolute requirements. Unlike conventional cables relying solely on conduit or external protection, SWA cables integrate mechanical armoring as an integral structural component, offering permanent protection against physical damage, burrowing animals, excavation equipment, and external mechanical stress. Core Engineering Philosophy: SWA cable design employs multi-layer engineering architecture combining XLPE insulation excellence with steel wire mechanical protection and halogen-free outer sheathing. This integrated approach eliminates the need for external conduit in most underground, outdoor, and hazardous-area applications—reducing installation cost, complexity, and maintenance requirements while providing superior long-term reliability. Market Position & Regulatory Compliance: SWA cables comply with IEC 60502-1 international standards and equivalent national specifications including KS C specifications. These cables specifically address the requirements of the EN 50288 and equivalent standards covering cables with protective conductors and armored configurations. The combination of XLPE insulation with halogen-free sheathing provides automatic compliance with fire safety codes adopted across Europe, Asia, and industrial facilities worldwide where smoke emission and toxic fume generation create liability concerns.
Technical Department
on14/04/2026

0.6/1kV XLPE Insulated Halogen-Free Steel Wire Armored Cable

SWA Cable Architecture & Engineering Design Strategy Purpose & Application Scope: Steel Wire Armored (SWA) cables represent the engineering solution for power distribution where mechanical protection, fire safety, and environmental resistance create absolute requirements. Unlike conventional cables relying solely on conduit or external protection, SWA cables integrate mechanical armoring as an integral structural component, offering permanent protection against physical damage, burrowing animals, excavation equipment, and external mechanical stress. Core Engineering Philosophy: SWA cable design employs multi-layer engineering architecture combining XLPE insulation excellence with steel wire mechanical protection and halogen-free outer sheathing. This integrated approach eliminates the need for external conduit in most underground, outdoor, and hazardous-area applications—reducing installation cost, complexity, and maintenance requirements while providing superior long-term reliability. Market Position & Regulatory Compliance: SWA cables comply with IEC 60502-1 international standards and equivalent national specifications including KS C specifications. These cables specifically address the requirements of the EN 50288 and equivalent standards covering cables with protective conductors and armored configurations. The combination of XLPE insulation with halogen-free sheathing provides automatic compliance with fire safety codes adopted across Europe, Asia, and industrial facilities worldwide where smoke emission and toxic fume generation create liability concerns.
19 Min Read
To understand why extruded bedding is not merely a preference but an absolute requirement for flameproof (Ex d) cable systems, you must first grasp a counterintuitive physical reality: in an explosive atmosphere, a cable's internal structure is as critical to safety as its external armor. The voids, gaps, and air spaces that exist naturally between conductors during manufacturing are not benign features—they are potential pathways for flame propagation and explosive gas migration that can transform a localized fault into a catastrophic detonation. 要理解为什么挤包垫层不仅仅是一个偏好，而是防爆(Ex d)电缆系统的绝对要求，您必须首先掌握一个违反直觉的物理现实：在爆炸性气体环境中，电缆的内部结构与其外部铠装对安全的重要性一样关键。制造过程中自然存在于导体之间的间隙、缝隙和空气空间不是良性的特征——它们是火焰蔓延和爆炸性气体迁移的潜在通道，可能将局部故障转变为灾难性爆炸。 Picture an underground coal mine where methane-air mixture hovers at a concentration just below the Lower Explosive Limit (LEL) in certain drifts. The mine is equipped with continuous monitoring and ventilation to prevent accumulation, but a temporary variance in airflow creates a transient hazardous zone. Simultaneously, an electrical fault occurs inside a cable—perhaps insulation breakdown or a conductor-to-armor short circuit. The fault generates an arc and localized heat inside the cable, potentially igniting the explosive atmosphere within the machine it powers. The question is not whether the hazardous atmosphere will contact the arc; the question is how quickly it will propagate and whether it can escape confinement to detonate larger volumes of gas elsewhere in the mine.
Technical Department
on06/03/2026

Flameproof (Ex d) Systems: Why AS/NZS 1972 Type 3S Requires Extruded Bedding for Hazardous Glands

To understand why extruded bedding is not merely a preference but an absolute requirement for flameproof (Ex d) cable systems, you must first grasp a counterintuitive physical reality: in an explosive atmosphere, a cable’s internal structure is as critical to safety as its external armor. The voids, gaps, and air spaces that exist naturally between conductors during manufacturing are not benign features—they are potential pathways for flame propagation and explosive gas migration that can transform a localized fault into a catastrophic detonation. 要理解为什么挤包垫层不仅仅是一个偏好，而是防爆(Ex d)电缆系统的绝对要求，您必须首先掌握一个违反直觉的物理现实：在爆炸性气体环境中，电缆的内部结构与其外部铠装对安全的重要性一样关键。制造过程中自然存在于导体之间的间隙、缝隙和空气空间不是良性的特征——它们是火焰蔓延和爆炸性气体迁移的潜在通道，可能将局部故障转变为灾难性爆炸。 Picture an underground coal mine where methane-air mixture hovers at a concentration just below the Lower Explosive Limit (LEL) in certain drifts. The mine is equipped with continuous monitoring and ventilation to prevent accumulation, but a temporary variance in airflow creates a transient hazardous zone. Simultaneously, an electrical fault occurs inside a cable—perhaps insulation breakdown or a conductor-to-armor short circuit. The fault generates an arc and localized heat inside the cable, potentially igniting the explosive atmosphere within the machine it powers. The question is not whether the hazardous atmosphere will contact the arc; the question is how quickly it will propagate and whether it can escape confinement to detonate larger volumes of gas elsewhere in the mine.
10 Min Read
BFOU 0.6/1kV P5/P12 fire-resistant offshore power cable with 3 × 95 mm² tinned copper conductors is approximately 45 mm (1.77 inches), with a standard tolerance window of ±2.0 mm producing a permissible range of 43.0–47.0 mm. This specification is critical for cable gland selection because offshore and marine cable glands are manufactured with specific bore diameters engineered to accommodate this dimensional range. The approximate total weight of this cable is 4,950 kg/km (3,330 lbs/1000 ft), with copper content approximately 3,350 kg/km. It features three 95 mm² Class 2 tinned copper main power conductors, a halogen-free EPR insulation system, a critical mica tape fire-resistance layer rated for 830°C continuous operation (IEC 60331 certified), tinned copper wire braid armor providing mechanical protection and electromagnetic shielding, and an SHF2 halogen-free thermosetting outer sheath rated for extreme marine and subsea conditions.
Technical Department
on27/02/2026

Cable Gland Sizing: Finding the OD Tolerance for BFOU 0.6/1kV P5/P12 3×95 mm² Offshore Power Cable

BFOU 0.6/1kV P5/P12 fire-resistant offshore power cable with 3 × 95 mm² tinned copper conductors is approximately 45 mm (1.77 inches), with a standard tolerance window of ±2.0 mm producing a permissible range of 43.0–47.0 mm. This specification is critical for cable gland selection because offshore and marine cable glands are manufactured with specific bore diameters engineered to accommodate this dimensional range. The approximate total weight of this cable is 4,950 kg/km (3,330 lbs/1000 ft), with copper content approximately 3,350 kg/km. It features three 95 mm² Class 2 tinned copper main power conductors, a halogen-free EPR insulation system, a critical mica tape fire-resistance layer rated for 830°C continuous operation (IEC 60331 certified), tinned copper wire braid armor providing mechanical protection and electromagnetic shielding, and an SHF2 halogen-free thermosetting outer sheath rated for extreme marine and subsea conditions.
7 Min Read
Type 450 cables are Australian-standard reeling and trailing cables designed specifically for mining applications. Defined under AS/NZS 1802 (formerly AS 1802), these cables feature robust construction capable of withstanding the harsh conditions of underground and surface mining environments. The "Type 450" designation indicates cables rated for 450/750V operation in mining applications.
Technical Department
on03/02/2026

Ampcontrol Protection Relays: Required Pilot Core Resistance for Type 450 Cables

Type 450 cables are Australian-standard reeling and trailing cables designed specifically for mining applications. Defined under AS/NZS 1802 (formerly AS 1802), these cables feature robust construction capable of withstanding the harsh conditions of underground and surface mining environments. The “Type 450” designation indicates cables rated for 450/750V operation in mining applications.
7 Min Read
In the demanding environment of underground coal mining operations, electrical cable safety is not merely a regulatory checkbox—it represents a fundamental commitment to worker protection and operational reliability. When evaluating cable manufacturers for compliance with the Australian and New Zealand Standard AS/NZS 1802, the presence of a NATA-accredited test report serves as the gold standard of verification, providing independent assurance that cables meet stringent safety requirements designed specifically for hazardous underground coal mining conditions. 在地下煤矿作业的严苛环境中，电缆安全不仅仅是一个监管要求——它代表着对工人保护和运营可靠性的根本承诺。在评估电缆制造商是否符合澳大利亚和新西兰标准AS/NZS 1802时，NATA认证的测试报告作为验证的黄金标准，提供独立保证，确保电缆满足专为危险地下煤矿条件设计的严格安全要求。
Technical Department
on29/01/2026

Compliance Certificate: Does the Cable Manufacturer Provide a NATA-Accredited Test Report for AS/NZS 1802 Compliance?

In the demanding environment of underground coal mining operations, electrical cable safety is not merely a regulatory checkbox—it represents a fundamental commitment to worker protection and operational reliability. When evaluating cable manufacturers for compliance with the Australian and New Zealand Standard AS/NZS 1802, the presence of a NATA-accredited test report serves as the gold standard of verification, providing independent assurance that cables meet stringent safety requirements designed specifically for hazardous underground coal mining conditions. 在地下煤矿作业的严苛环境中，电缆安全不仅仅是一个监管要求——它代表着对工人保护和运营可靠性的根本承诺。在评估电缆制造商是否符合澳大利亚和新西兰标准AS/NZS 1802时，NATA认证的测试报告作为验证的黄金标准，提供独立保证，确保电缆满足专为危险地下煤矿条件设计的严格安全要求。
5 Min Read
N3GHSSYCY — это экранированный высоковольтный гибкий кабель промышленного класса, специально разработанный для подключения мобильного оборудования в шахтах и подземных выработках со взрывоопасной средой. Кабель соответствует международному стандарту DIN VDE 0250, часть 605 и выпускается в двух номинальных напряжениях: 3.6/6 кВ и 6/10 кВ. Особенностью конструкции является наличие фазоконцентрического заземляющего проводника и общего концентрического экрана мониторинга, которые в сочетании со схемой высоковольтной защиты позволяют контролировать кабель на наличие дефектов изоляции и повреждений от внешних воздействий.
Technical Department
on12/01/2026

N3GHSSYCY — Экранированный Высоковольтный Кабель с Резиновой Изоляцией и ПВХ Оболочкой

N3GHSSYCY кабель, высоковольтный кабель, экранированный кабель, кабель с резиновой изоляцией, кабель с ПВХ оболочкой, кабель DIN VDE 0250-605, кабель 3.6/6 кВ, кабель 6/10 кВ, горнодобывающий кабель высокого напряжения, кабель для шахт, кабель для подземных выработок, кабель для взрывоопасных зон, кабель EPR изоляция, кабель с экраном мониторинга, кабель с заземляющим экраном, кабель со стальной бронёй, кабель с контрольными жилами, кабель с литыми терминациями, гибкий высоковольтный кабель, кабель для тоннелестроения, кабель для трансформаторов, кабель низкой ёмкости, кабель для сетей 10 кВ, кабель для сетей 5 кВ, кабель тройной экструзии, кабель с медной оплёткой, кабель с оцинкованной стальной бронёй, красный кабель ПВХ YM5, кабель 3×25 N3GHSSYCY, кабель 3×35 N3GHSSYCY, кабель 3×50 N3GHSSYCY, кабель 3×70 N3GHSSYCY, кабель 3×95 N3GHSSYCY, кабель с фазоконцентрическим заземлением, кабель для мобильного оборудования, кабель для контейнерной укладки, высоковольтный кабель для горнодобычи, кабель для подземных работ СНГ, экранированный силовой кабель, кабель с двойным экраном, кабель мониторинга изоляции, высоковольтный резиновый кабель, кабель для опасных сред, промышленный высоковольтный кабель, кабель для передвижных установок, кабель Россия, кабель Казахстан, кабель Беларусь, китайский производитель высоковольтного кабеля, Anhui Feichun кабель, кабель ГОСТ 16442, кабель IEC 60502
11 Min Read
Mining, drilling, and tunnelling cables represent a specialized category of electrical cables engineered to withstand the extreme conditions found in extractive industry operations. Unlike standard industrial cables, these cables must endure continuous mechanical stress from reeling and unreeling operations, exposure to ultraviolet radiation in surface mining, salt-water submersion in offshore drilling, contact with oils and greases from machinery, and the abrasive conditions of underground environments. The demanding nature of these applications requires cables with exceptional durability, flexibility, and resistance to environmental factors that would rapidly degrade conventional cables.
Technical Department
on07/01/2026

What is Mining, Drilling & Tunnelling Cable? Solutions for Surface, Sub-Surface & Underground Operations

(N)3GHSSHCH – 3.6/6kV, 6/10kV, 8.7/15kV, 12/20kV (N)3GHSSYCY – 3.6/6kV, 6/10kV, 8.7/15kV, 12/20kV (N)SSCHÖU-J – 0.6/1kV (N)SHÖU O/J – 0.6/1kV NSSHÖU O/J – 0.6/1kV NSSHÖU 3E – 0.6/1kV NSSHÖU 3E + ST – 0.6/1kV (N)TMCGEWÖU – 3.6/6kV to 18/30kV (N)TSCGEWÖU – 3.6/6kV to 18/30kV (N)TSCGEWÖU ZH – 3.6/6kV to 12/20kV (N)TSCGEWÖU ATB – 3.6/6kV to 12/20kV (N)TSCGEWÖU FO – 3.6/6kV to 12/20kV (N)TSCGEWÖU Submersible – 3.6/6kV to 12/20kV (N)TSKCGEWÖU – 3.6/6kV to 18/30kV (N)TSCGECEWÖU – 3.6/6kV to 12/20kV (N)TSCGECEWÖU ATB – 3.6/6kV to 12/20kV (N)TSCGECEWÖU ATB GCC – 1.8/3kV to 12/20kV (N)TSCGECEWÖU Submersible – 3.6/6kV to 12/20kV (N)TSCGECECWÖU – 3.6/6kV to 12/20kV (N)TSCGECECWÖU ZH – 3.6/6kV to 12/20kV R-(N)TSCGEWÖU + FO – 3.6/6kV to 12/20kV
9 Min Read
The Veriflex range encompasses control cables (SY, CY, YY series), fieldbus cables (Profibus DP/PA, DeviceNet), and Industrial Ethernet cables (Profinet, PUR Ethernet). Available in both PVC and LSZH (Low Smoke Zero Halogen) variants, the portfolio addresses diverse installation environments from standard industrial settings to fire-sensitive locations requiring enhanced safety performance.
Technical Department
on05/01/2026

What is Veriflex Cable?

Veriflex CY PVC YSLCY, Veriflex SY PVC YSLYSY, Veriflex YY PVC YSLY, Veriflex YY LSZH HSLH, Veriflex CY LSZH HSLCH, Veriflex Screened Bedded LSZH HSLHCH, Veriflex YSLYCY 1kV cable, Veriflex Control PUR-JZ, Veriflex 2XSL(st)CH LSZH, Veriflex DeviceNet Thick FRNC-LSZH, Veriflex DeviceNet Thin LSZH, Veriflex Profibus DP FC L2/FIP PVC, Veriflex Profibus DP FC L2/FIP LSZH, Veriflex Profibus PA PVC, Veriflex Profibus PA FRNC-LSZH, Veriflex Profinet Type A, Veriflex PUR Industrial Ethernet, Veriflex Interface BUS Cable
6 Min Read
BS6708, mining cable, quarry cable, trailing cable, EPR cable, SWA cable, coal cutter cable, excavator cable, 礦用電纜, 採石場電纜, 拖曳電纜
Technical Department
on19/12/2025

What is BS6708 Cable?

British Standard BS6708 sets out the requirements for flexible trailing cables where used in mining operations and quarries. These cables are often referred to as trailing cables, quarry cables, or auxiliary cables and have applications with a wide range of dynamic mining equipment including excavators, coal-cutters, crushing machines, and shuttle cars. flexible trailing cable, mine cable, EPR mining cable, SWA mining cable, chloroprene cable, coal cutter cable, excavator cable, shuttle car cable, crushing machine cable, coal face cable, Type 7 mining cable, Type 7M cable, Type 7S cable, Type 11 cable, Type 20 cable, Type 21 cable, Type 307 cable, Type 331 cable, Type 621 cable, Type 631 cable, 640/1100V mining cable, 1.9/3.3kV mining cable
9 Min Read
heavy-duty rubber cables represent a critical category for applications requiring exceptional mechanical strength, flexibility, and environmental resistance. This comprehensive technical guide examines three closely related cable types that dominate international markets for portable power transmission: the Chinese standard GB/T 5013 YC (Heavy-Duty General Rubber Cable) rated at 450/750V, the enhanced YCW variant with oil and weather resistance, and the European harmonized H07RN-F cable that serves as the international equivalent.
Technical Department
on28/11/2025

GB/T 5013 YC & YCW Heavy-Duty Rubber Cables and H07RN-F: Comprehensive Technical Analysis

heavy-duty rubber cables represent a critical category for applications requiring exceptional mechanical strength, flexibility, and environmental resistance. This comprehensive technical guide examines three closely related cable types that dominate international markets for portable power transmission: the Chinese standard GB/T 5013 YC (Heavy-Duty General Rubber Cable) rated at 450/750V, the enhanced YCW variant with oil and weather resistance, and the European harmonized H07RN-F cable that serves as the international equivalent.
23 Min Read
TENAX-HTT (N)TSCGEWOEU 10 kV – 30 kV: Technical Guide for Extreme Duty High-Voltage Mining Cables for Underground Transformers and Tunneling Equipment
Technical Department
on24/11/2025

TENAX-HTT (N)TSCGEWOEU 10 kV – 30 kV

TENAX-HTT TSCGEWOEU, 10kV 30kV mining cable, high voltage underground cable, extreme duty mining cable, slow reeling cable, transformer connection cable, hazardous environment cable, VDE 0250-813, tunneling MV cable
15 Min Read
CEI 20-27 CENELEC HD361 Cable
Technical Department
on11/11/2025

What is CEI 20-27 CENELEC HD361 Cable?

CEI 20-27 CENELEC HD361 represents a standardized cable designation system developed by the European Committee for Electrotechnical Standardisation (CENELEC) to provide uniform identification and classification of harmonized power cables and cords across European markets. This systematic coding methodology enables engineers, procurement specialists, and electrical contractors to precisely identify cable specifications including voltage ratings, insulation materials, conductor types, and sheathing compounds through a structured alphanumeric designation format.