[email protected]

flexible feeder cable

4 Min Read
飞纯 Type 209 是飞纯电缆基于 AS/NZS 1802:2003 卷筒与拖曳电缆 体系设计的矿用柔性馈电与拖曳电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，Type 209 系列电缆主要作为矿山机械柔性馈电电缆使用，更适合作为拖曳电缆而不是高频卷筒电缆。较小规格适用于钻机、手持工具和移动设备。 这一定义是理解 Type 209 的关键。Type 209 不是普通工业橡套软电缆，也不只是单纯的矿山供电线。它的核心定位是 矿山机械柔性馈电电缆，也就是为矿山机械提供可移动、可拖曳、可适应复杂作业路径的供电系统。同时，它更适合作为 拖曳电缆，即跟随设备移动的电缆，而不是长期高频卷绕使用的卷筒电缆。
Technical Department
on22/06/2026

飞纯 Type 209 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用柔性馈电与拖曳电缆技术解析

飞纯 Type 209 是飞纯电缆基于 AS/NZS 1802:2003 卷筒与拖曳电缆 体系设计的矿用柔性馈电与拖曳电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，Type 209 系列电缆主要作为矿山机械柔性馈电电缆使用，更适合作为拖曳电缆而不是高频卷筒电缆。较小规格适用于钻机、手持工具和移动设备。 这一定义是理解 Type 209 的关键。Type 209 不是普通工业橡套软电缆，也不只是单纯的矿山供电线。它的核心定位是 矿山机械柔性馈电电缆，也就是为矿山机械提供可移动、可拖曳、可适应复杂作业路径的供电系统。同时，它更适合作为 拖曳电缆，即跟随设备移动的电缆，而不是长期高频卷绕使用的卷筒电缆。
16 Min Read
Feichun AS/NZS 1972 Type 2S 3.3kV cables can serve as direct drop-in replacements for Olex Nexans Versolex Type 2S mining cables, provided that the specifications are matched cross-section for cross-section and that the installation environment confirms compliance with AS/NZS 1972 requirements. However, this replacement is not automatic or universal. It requires careful verification of your existing Olex cable specifications, comparison against Feichun's equivalent product line, validation of termination compatibility, and confirmation that your mining site's electrical protection systems (earth leakage relays, neutral earthing resistors, and protection settings) are appropriately configured for the replacement cable's impedance characteristics.
Technical Department
on06/03/2026

Drop-in SWA Replacement for Olex Versolex Type 2S 3.3kV Underground Power Cable

Feichun AS/NZS 1972 Type 2S 3.3kV cables can serve as direct drop-in replacements for Olex Nexans Versolex Type 2S mining cables, provided that the specifications are matched cross-section for cross-section and that the installation environment confirms compliance with AS/NZS 1972 requirements. However, this replacement is not automatic or universal. It requires careful verification of your existing Olex cable specifications, comparison against Feichun’s equivalent product line, validation of termination compatibility, and confirmation that your mining site’s electrical protection systems (earth leakage relays, neutral earthing resistors, and protection settings) are appropriately configured for the replacement cable’s impedance characteristics.
18 Min Read
The primary difference between AS/NZS 1802 Type 241 and Type 245 mining cables lies in their internal core configuration and the resulting mechanical flexibility characteristics. Type 241 contains three power cores, three interstitial grounding cores, and one central extensible pilot core (total of seven conductors), while Type 245 contains three power cores, three interstitial grounding cores, and three central extensible pilot cores (total of nine conductors). This seemingly modest difference—replacing one central pilot with three parallel pilots—fundamentally changes how the cable bends, flexes, and responds to the mechanical stresses of underground mining operations. Type 241 is the standard general-purpose feeder cable designed for continuous miners, pump power supplies, and applications where the cable experiences moderate, repetitive flexing but does not encounter the extreme bending and twisting stresses of longwall operations. Type 245 is the high-flexibility shearer cable engineered specifically for longwall shearers and other equipment that demands superior resistance to severe, repetitive bending and the complex rotational stresses that characterize modern longwall mining systems.
Technical Department
on05/03/2026

Type 241 vs Type 245 AS/NZS 1802 Mining Cables: Complete Technical Comparison Guide with Application-Specific Selection Methodology

The primary difference between AS/NZS 1802 Type 241 and Type 245 mining cables lies in their internal core configuration and the resulting mechanical flexibility characteristics. Type 241 contains three power cores, three interstitial grounding cores, and one central extensible pilot core (total of seven conductors), while Type 245 contains three power cores, three interstitial grounding cores, and three central extensible pilot cores (total of nine conductors). This seemingly modest difference—replacing one central pilot with three parallel pilots—fundamentally changes how the cable bends, flexes, and responds to the mechanical stresses of underground mining operations. Type 241 is the standard general-purpose feeder cable designed for continuous miners, pump power supplies, and applications where the cable experiences moderate, repetitive flexing but does not encounter the extreme bending and twisting stresses of longwall operations. Type 245 is the high-flexibility shearer cable engineered specifically for longwall shearers and other equipment that demands superior resistance to severe, repetitive bending and the complex rotational stresses that characterize modern longwall mining systems.
14 Min Read
Understanding the thermal short-circuit current limits of cable earth screens represents a critical aspect of mining cable design and electrical system safety. When a fault occurs in a mining electrical system, massive currents can flow through the cable's protective earth screen, generating intense heat that must be contained without damaging the cable's insulation or compromising its structural integrity. For Type 209 mining cables, which serve as flexible feeders to machinery in demanding underground coal mining environments, accurately calculating these thermal limits ensures that the composite earth screen can safely carry fault currents until protective devices clear the fault. 了解电缆地线屏蔽的热短路电流限制是矿用电缆设计和电气系统安全的关键方面。当矿山电气系统发生故障时，巨大的电流可能通过电缆的保护性地线屏蔽流动，产生必须在不损坏电缆绝缘或损害其结构完整性的情况下控制的强热。对于作为苛刻地下煤矿环境中机械柔性馈线的Type 209矿用电缆，准确计算这些热限制确保复合地线屏蔽能够安全承载故障电流，直到保护装置清除故障。
Technical Department
on29/01/2026

Short Circuit Rating: How to Calculate the Thermal Short-Circuit Limit for the Earth Screen of a Type 209 Cable

Understanding the thermal short-circuit current limits of cable earth screens represents a critical aspect of mining cable design and electrical system safety. When a fault occurs in a mining electrical system, massive currents can flow through the cable’s protective earth screen, generating intense heat that must be contained without damaging the cable’s insulation or compromising its structural integrity. For Type 209 mining cables, which serve as flexible feeders to machinery in demanding underground coal mining environments, accurately calculating these thermal limits ensures that the composite earth screen can safely carry fault currents until protective devices clear the fault. 了解电缆地线屏蔽的热短路电流限制是矿用电缆设计和电气系统安全的关键方面。当矿山电气系统发生故障时，巨大的电流可能通过电缆的保护性地线屏蔽流动，产生必须在不损坏电缆绝缘或损害其结构完整性的情况下控制的强热。对于作为苛刻地下煤矿环境中机械柔性馈线的Type 209矿用电缆，准确计算这些热限制确保复合地线屏蔽能够安全承载故障电流，直到保护装置清除故障。
22 Min Read
TYPE 409 mining cables represent a specialized category of flexible trailing cables designed to meet the rigorous demands of surface mining, underground mining operations, and general industrial applications where movable plant requires reliable electrical power supply. Manufactured in compliance with the AS/NZS 2802:2000 standard, these Class 2 heavy-duty cables feature ethylene propylene rubber (EPR) insulation, composite copper and polyester braid screening, and elastomeric sheath construction. Available in voltage ratings from 1.1 kilovolts up to 22 kilovolts, TYPE 409 cables serve as the electrical lifeline for machinery ranging from handheld drills and pumps to massive dragline excavators and shovels.
Technical Department
on14/11/2025

TYPE 409 1.1 to 22kV Mining Cables to AS/NZS 2802:2000

The engineering sophistication of TYPE 409 cables reflects decades of development in mining cable technology, incorporating semiconductive screening systems, central cradle separators, and interstitial pilot conductors that work together to ensure safe and reliable operation in extreme environmental conditions. The cables must withstand extraordinary mechanical stresses, continuous flexing, abrasion from dust and debris, exposure to oils and chemicals, ultraviolet radiation, and temperature extremes while maintaining electrical integrity and personnel safety.
22 Min Read
TYPE 209 and TYPE 210 mining cables represent critical power distribution infrastructure specifically engineered for the demanding environments of underground coal mining and surface mining operations throughout Australia and New Zealand.
Technical Department
on14/11/2025

TYPE 209 & TYPE 210 Australian Mining Cables

TYPE 209 and TYPE 210 mining cables represent critical power distribution infrastructure specifically engineered for the demanding environments of underground coal mining and surface mining operations throughout Australia and New Zealand.