[email protected]

EPDM rubber

20 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on18/06/2026

Гибкие шахтные, карьерные и тяжёлые резиновые кабели для trailing, reeling, drag chain, festoon, вертикальных стволов, насосов и подземных работ

Данная серия включает специальные гибкие кабели для тяжёлых условий эксплуатации: шахтные trailing cables, reeling cables, drag chain cables, festoon cables, водостойкие кабели для насосов, кабели для вертикальных стволов, туннельных и дноуглубительных работ, а также силовые, контрольные и коммуникационные конструкции. В линейке представлены решения с силовыми жилами, защитно-заземляющими проводниками, ground check, контрольными элементами, fiber optic module, экранами, полупроводящими слоями, полиамидным армированием и особо прочными оболочками из CR, CPE, TPU и специальных термореактивных компаундов.
28 Min Read
NSHTÖU-J 24G2.5 flexible reeling cable is the globally recognized industry standard for ship-to-shore crane spreader basket vertical lift systems, featuring 24 conductors with 2.5 mm² cross-section per core (one conductor designated green/yellow for grounding/safety) providing approximately 30 amperes current capacity in free-air installation at 30°C ambient, but derating to approximately 15 amperes actual safe continuous current when accounting for the multi-core bundle derating factor of 0.45 to 0.50 and tropical port ambient temperatures. The cable's nominal outer diameter ranges from 28.5 to 32.5 millimeters, with total weight of approximately 1,350 kilograms per kilometer, making it manageable for standard spreader basket spools while maintaining the conductor density necessary for reliable simultaneous power and control signal transmission. The cable features proprietary anti-torsion braid structure embedded between inner and outer sheaths—a critical innovation that provides resistance to ±50° per meter torsional deformation, fundamentally preventing the destructive corkscrew effect that kills ordinary flexible cables within 3 to 6 months of tropical port operation. The cable incorporates Class 5 tinned copper conductors engineered specifically for the fatigue resistance required by continuous 160 meters per minute reeling cycles, EPDM insulation maintaining electrical integrity at the 90°C conductor temperatures that result from high-speed duty cycles in multi-core bundles, 5GM5 elastomer outer sheath providing exceptional resistance to salt-spray corrosion, UV degradation, petroleum-based oils, and mechanical abrasion encountered in global container ports. The cable is rated for 0.6/1.0 kilovolt nominal operation, with dielectric test voltage capability reaching 3 kilovolts, more than adequate for spreader basket control circuits and auxiliary power distribution. Unlike generic "marine-grade" cables or rebranded industrial flexible cables, NSHTÖU-J 24G2.5 is purpose-built to tolerate the combined mechanical, thermal, and environmental stresses unique to STS crane spreader applications—making it not simply the preferred option but the only technically defensible choice for reliability-critical spreader systems operating in high-intensity container port environments.
Technical Department
on02/03/2026

STS Crane Spreader Baskets: Why NSHTÖU-J 24G2.5 is the Industry Standard for Vertical Lift Power & Control

NSHTÖU-J 24G2.5 flexible reeling cable is the globally recognized industry standard for ship-to-shore crane spreader basket vertical lift systems, featuring 24 conductors with 2.5 mm² cross-section per core (one conductor designated green/yellow for grounding/safety) providing approximately 30 amperes current capacity in free-air installation at 30°C ambient, but derating to approximately 15 amperes actual safe continuous current when accounting for the multi-core bundle derating factor of 0.45 to 0.50 and tropical port ambient temperatures. The cable’s nominal outer diameter ranges from 28.5 to 32.5 millimeters, with total weight of approximately 1,350 kilograms per kilometer, making it manageable for standard spreader basket spools while maintaining the conductor density necessary for reliable simultaneous power and control signal transmission. The cable features proprietary anti-torsion braid structure embedded between inner and outer sheaths—a critical innovation that provides resistance to ±50° per meter torsional deformation, fundamentally preventing the destructive corkscrew effect that kills ordinary flexible cables within 3 to 6 months of tropical port operation. The cable incorporates Class 5 tinned copper conductors engineered specifically for the fatigue resistance required by continuous 160 meters per minute reeling cycles, EPDM insulation maintaining electrical integrity at the 90°C conductor temperatures that result from high-speed duty cycles in multi-core bundles, 5GM5 elastomer outer sheath providing exceptional resistance to salt-spray corrosion, UV degradation, petroleum-based oils, and mechanical abrasion encountered in global container ports. The cable is rated for 0.6/1.0 kilovolt nominal operation, with dielectric test voltage capability reaching 3 kilovolts, more than adequate for spreader basket control circuits and auxiliary power distribution. Unlike generic “marine-grade” cables or rebranded industrial flexible cables, NSHTÖU-J 24G2.5 is purpose-built to tolerate the combined mechanical, thermal, and environmental stresses unique to STS crane spreader applications—making it not simply the preferred option but the only technically defensible choice for reliability-critical spreader systems operating in high-intensity container port environments.