BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan

on23/06/2026

O que é o PROTOMONT EMV-FC (N)SHXCÖEU 0,6/1KV: Análise de Engenharia Aprofundada do Cabo Flexível Blindado para Variadores e Conversores de Frequência na Mineração

O PROTOMONT EMV-FC (N)SHXCÖEU 0,6/1KV é um cabo de potência de borracha flexível, livre de halogênio e eletromagneticamente blindado, projetado como cabo de alimentação de motor para acionamentos controlados por Variadores de Frequência (VFD) e Conversores de Frequência (FC) na indústria de mineração, em frentes de obra e aplicações similares sob esforços mecânicos severos. Sua característica definidora é a combinação de três sistemas em um único corpo: condutores de cobre estanhado finamente trançados classe 5, uma blindagem de cobre estanhado trançada para compatibilidade eletromagnética (EMC) e um conjunto de borracha EPR/EVA, livre de halogênio, capaz de operar de forma flexível em equipamentos de manuseio de materiais em movimento contínuo — incluindo lanças de cabos (cable booms) e a conexão entre os carros superior e inferior — e de permanecer permanentemente submerso em água até 40°C a uma profundidade máxima de 500 metros.

飞纯 Type 275 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用柔性馈电电缆，电压等级为 1.1/1.1KV。根据产品资料，该电缆主要作为梭车和泵的柔性馈电电缆使用。 Type 275 的关键工程特点是接地芯线设计用于降低电缆在张力卷绕过程中发生断丝的风险。梭车电缆和泵用馈电电缆经常处于卷绕、拖曳、拉伸、反复弯曲和移动工况中，接地芯线如果在张力卷绕过程中发生断丝，将影响接地连续性和供电安全。Type 275 因此更强调接地芯线结构可靠性，而不是单纯的导体截面或外径参数。

Technical Department

on22/06/2026

飞纯 Type 275 1.1/1.1KV：基于 AS/NZS 1802:2003 的澳洲矿用梭车与泵用柔性馈电电缆技术解析

飞纯 Type 275 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用柔性馈电电缆，电压等级为 1.1/1.1KV。根据产品资料，该电缆主要作为梭车和泵的柔性馈电电缆使用。 Type 275 的关键工程特点是接地芯线设计用于降低电缆在张力卷绕过程中发生断丝的风险。梭车电缆和泵用馈电电缆经常处于卷绕、拖曳、拉伸、反复弯曲和移动工况中，接地芯线如果在张力卷绕过程中发生断丝，将影响接地连续性和供电安全。Type 275 因此更强调接地芯线结构可靠性，而不是单纯的导体截面或外径参数。

飞纯 Type 260 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用铠装馈电电缆，电压范围覆盖 1.1 至 11KV。根据产品资料，该铠装电缆主要用于需要机械保护和强度的电源馈电场景，也可作为机械设备馈电电缆，例如可移动矿用变电站和砂矿开采供电。 Type 260 与非铠装矿用拖曳电缆相比，最大的差异在于可弯曲镀锌低碳钢丝铠装。该结构位于内护套与外护套之间，使电缆在承受外部挤压、冲击、拖曳、石块磨损和设备边缘摩擦时，具备更强的机械保护能力。因此，Type 260 适合那些不仅要求供电可靠，还要求电缆具有更高物理防护强度的矿山馈电场景。

Technical Department

on22/06/2026

飞纯 Type 260 1.1 至 11KV：基于 AS/NZS 1802:2003 的澳洲矿用铠装馈电电缆技术解析

飞纯 Type 260 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用铠装馈电电缆，电压范围覆盖 1.1 至 11KV。根据产品资料，该铠装电缆主要用于需要机械保护和强度的电源馈电场景，也可作为机械设备馈电电缆，例如可移动矿用变电站和砂矿开采供电。 Type 260 与非铠装矿用拖曳电缆相比，最大的差异在于可弯曲镀锌低碳钢丝铠装。该结构位于内护套与外护套之间，使电缆在承受外部挤压、冲击、拖曳、石块磨损和设备边缘摩擦时，具备更强的机械保护能力。因此，Type 260 适合那些不仅要求供电可靠，还要求电缆具有更高物理防护强度的矿山馈电场景。

飞纯 Type 245 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用非常柔性长壁采煤机电缆，电压范围覆盖 1.1 至 6.6KV。根据产品资料，该电缆主要用作长壁采煤机电缆，也可用于连续采煤机和长壁外围电缆。 Type 245 的关键结构特征是三根中央可伸长 Pilot / 控制芯线。这三根中央 Pilot 芯线可用于接地连续性监测和控制回路。对于长壁采煤机来说，电缆不仅要传输动力电能，还要承担设备控制、保护联锁、接地连续性确认和移动工况下的安全监测任务。

Technical Department

on22/06/2026

飞纯 Type 245 1.1 至 6.6KV：基于 AS/NZS 1802:2003 的澳洲矿用长壁采煤机电缆技术解析

飞纯矿用电缆 Type 245 是一种非常柔软的矿用电缆，主要用作长壁采煤机电缆，也适用于连续采煤机和长壁外围电缆。该电缆含有三根中央 Pilot 芯线，可用于接地连续性监测和控制回路，适合长壁采煤系统中对柔性、保护、监测和控制可靠性要求较高的移动供电场景。

Large three-phase AC motors drove continuous-duty equipment (conveyor systems, pump stations, ventilation fans) with straightforward on/off control via contactor switches. The control circuits were simple, the equipment was robust and forgiving of electrical noise, and cable specifications focused purely on mechanical durability and basic electrical protection. Modern underground mining operations operate in a fundamentally different electrical environment. Variable frequency drives (VFDs) regulate motor speeds to match load requirements, reducing energy consumption and extending equipment life. Programmable logic controllers (PLCs) and distributed control systems (DCS) automate equipment sequencing and mine ventilation. Wireless monitoring systems track equipment health, environmental conditions, and safety parameters. The mine's electrical environment has become as electrically complex as an industrial manufacturing facility, except that everything must operate underground in the presence of conductive dust, moisture, and metallic ore particles that create unintended current paths and electromagnetic noise sources.

Technical Department

on22/06/2026

符合俄罗斯 GOST R 消防认证的电缆 —— 飞纯电缆

在俄罗斯及关税同盟相关工程项目中，电缆采购不只是电压、截面、载流量和价格的比较，更是消防安全合规、项目文件完整性和市场准入能力的综合判断。飞纯电缆通过俄罗斯 FSC 消防安全合格认证，并能够围绕 GOST R 与防火安全认证体系的协同要求，为矿山、港口、工业设备、移动机械和能源项目提供更可靠的电缆合规解决方案。

BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in hoisting control cable design, specifically engineered for next-generation automated port crane systems operating under extreme environmental and operational constraints. Unlike the BASKET SPREADER 740's 300/500V AC specification, the 750 operates at 0.6/1kV AC with dual-voltage DC capability (0.9/1.8 kV)—a classification shift that enables: Higher power capacity – 2–3× greater amperage per conductor, enabling longer cable runs with lower voltage drop Medium-voltage infrastructure compatibility – Direct integration with port substation power distribution systems (0.6 kV = 600V three-phase industrial standard) DC dual-voltage operation – Simultaneous support for AC motor control and DC feedback/signaling circuits (0.9/1.8 kV DC margins) Extreme temperature capability – Operating range −50°C to +80°C (vs. SPREADER 740's −20°C to +60°C), addressing Arctic port terminals and tropical high-ambient scenarios Advanced insulation chemistry – GAALTHERM® 530 thermoplastic compound replaces standard PVC/PUR, delivering superior chemical resistance and thermal stability This cable bridges the gap between standard control cables (300/500V, limited temperature) and heavy industrial medium-voltage distribution cables, creating a purpose-built solution for modern automated gantry crane systems in global port terminals.

Technical Department

on22/06/2026

经过 FSC 认证电缆的采购指南：为什么推荐飞纯电缆

对于俄罗斯及关税同盟相关工程项目，电缆采购不应只比较价格、截面和交期。经过 FSC 消防安全合格认证的电缆，能够在消防合规、项目准入、进口文件、现场验收和安全责任管理中发挥关键作用。飞纯电缆通过俄罗斯 FSC 消防安全合格认证，即 Сертификат пожарной безопасности，适合作为矿山、港口、工业设备、移动机械和能源项目的重点推荐供应商。

DM1N and 2M2N designations represent the apex of mining cable complexity — flexible armoured cables engineered for medium-voltage (1.8/3 kV, 3.6/6 kV) mobile equipment operating in the most mechanically extreme underground environments. These cables are specified for longwall coal shearers, hydraulic drill jumbos, and other continuous-operation mobile equipment that simultaneously demand ultra-high mechanical durability and medium-voltage electrical capability. The fundamental engineering challenge that defines DM1N/2M2N is this: medium-voltage cables require internal semi-conductive layers and sophisticated insulation architecture to prevent corona discharge (electrical breakdown at high voltage), but they must simultaneously maintain the extreme mechanical flexibility required for cable reel winding and equipment drag duty. This convergence is far more difficult than it might appear, because the semi-conductive layers and additional insulation walls that prevent corona also inherently reduce mechanical flexibility and increase cable stiffness.

Technical Department

on22/06/2026

什么是 FCS 俄罗斯防火消防认证，以及飞纯拥有这项认证有什么优势和背书

FCS 俄罗斯防火消防认证，工程语境中也常被写作 FSC Fire Safety Certificate，是俄罗斯市场和相关项目审查中用于证明产品符合消防安全法规、火灾风险控制和特定测试要求的重要合格证明。对于港口岸桥、卸船机、堆取料机、斗轮机、矿山移动设备、卷筒系统和拖令系统用电缆而言，它的价值不只是“多一张证书”，而是把电缆在火焰传播、烟雾释放、燃烧毒性、耐火或火灾下功能保持等维度转化为可被项目方、EPC、船厂、港机厂、矿山业主和俄罗斯客户审查的技术证据。

LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable

Technical Department

on10/06/2026

PROTOMONT(Z) NSSHKCGEOEU 0.6/1kV：用于地下采矿自由拖曳作业的钢丝编织增强煤机电缆深度解析

PROTOMONT(Z) NSSHKCGEOEU 0.6/1kV 是一款 coal cutter cables for trailing operations。它用于 underground machine applications 中的移动设备供电连接，典型设备包括 coal shearer、roadheader、TBM、scoops / LHDs。与 cable handler 链式运行电缆不同，(Z)-Coal-Cutter cables 专为 free trailing operation 设计，凭借特殊结构可在运行中被拖曳在机器后方相当长的距离

FLEXIFESTOON® NE-FLAT CY (N)GFLCGÖU: Advanced Screened EMI-Protected Flat Cable for Industrial Automation, Festoon Systems, and Electromagnetic Noise Immunity Applications 0.6/1 kV Screened Control Cable | Tinned Copper Braid EMI/RFI Shielding | EPR Rubber Insulation | Parallel Core Stranding | 180 m/min Festoon Deployment | High-Flexibility Architecture

Technical Department

on10/06/2026

PROTOMONT (V) NSSHCGEOEU NEW 0.6/1kV：用于地下采矿采煤机链式运行的同心监视导体电缆深度解析

PROTOMONT (V) NSSHCGEOEU NEW 0.6/1kV 是一款 coal cutter cables for chain operation with concentric monitoring conductor。它用于地下采矿移动设备和机器的电源连接，典型应用包括 coal cutting machines。资料明确说明，(V) coal cutter cables 专为 cable protection chains，即 cable handler 应用设计；这些链系统拖在机器后方，并吸收运行过程中产生的拉伸力

FLEXIDRUM® R 503 employs GAALTHERM® 585—a proprietary synthetic elastomer compound developed by FeiChun and exclusive to this cable family. Unlike standard EPR or XLPE, GAALTHERM® 585 is a specialized nitrile-based elastomer (NBR) with engineered cross-link architecture optimized for extreme thermal and mechanical stress. 1.1 GAALTHERM® 585 Molecular Composition & Architecture The base polymer is Acrylonitrile-Butadiene Rubber (NBR) with proprietary dopants: Base Polymer: NBR (Acrylonitrile-Butadiene Rubber) Acrylonitrile content: 26–34 wt% (determines polarity and resistance to nonpolar oils) Butadiene content: 66–74 wt% Backbone: −[CH₂−CH=CH−CH₂]ₙ− (polybutadiene) with −CH(CN)− nitrile branches GAALTHERM® 585 Dopants (proprietary): 1. Polar nitrile groups (−CN): impart oil resistance, increase dielectric strength 2. Carboxylic acid groups (COOH): enable hydrogen bonding with adjacent chains, reducing chain mobility and increasing thermal stability (Tg ~−25°C vs −50°C std NBR) 3. Hindered phenolic antioxidants: 2–3 wt% load 4. Phosphite-based synergists: suppress thermo-oxidative degradation 5. Metal oxide fillers (MgO): enhance thermal aging resistance, improve modulus Cross-Link System: Sulfur-cured (not peroxide) with accelerators (TMTD, ZDEC) Cross-Link Density: 2.5–3.5 mol/cm³ (higher than standard NBR ~1.5 mol/cm³) Vulcanization Mechanism: Polysulfidic bridges (−S−, −S₂−, −S₃−) form between unsaturated C=C bonds in butadiene backbone

Technical Department

on22/05/2026

Feichun FC-CRANE PUR:Высокогибкий Антикоррозионный Кабельдля Портовых Кранов и Перегружателей

Полный технический анализ высокогибких кабелей серии FC-CRANE PUR производства Feichun — сертифицированного аналога ÖLFLEX® CRANE PUR (Lapp Group) серии 5G10 и смежных сечений. Разработаны специально для барабанных систем портовых кранов, контейнерных перегружателей (STS/RTG/RMG), ричстакеров и судовых грузовых лебёдок, работающих при скоростях намотки до 120 м/мин. Многопроволочная конструкция классов 5–6 по IEC 60228, полиуретановая (PUR) изоляция повышенной стойкости, морская антикоррозионная защита C5-M, механический ресурс >20 млн циклов, холодостойкость ХЛ-40 (-40°C). Полная сертификация по IEC 60811, EAC, DNV. Прямая замена санкционных кабелей ÖLFLEX, Helukabel, Nexans для российских и евразийских портов.