With a voltage rating of 18/30kV, these unarmoured cables with copper or aluminium conductors represent an essential category of European standard medium voltage cables. The 18/30kV rating signifies that these cables are designed for systems where the phase-to-earth voltage is 18kV and the phase-to-phase voltage is 30kV, with a maximum system voltage (Um) of 36kV. This voltage class is frequently deployed in power distribution grid networks, connecting sub-stations or feeding directly into industrial installations where transformers step down the voltage as required.

on31/12/2025

What is 18/30kV Cable?

18/30kV cable, 30kV cable, N2XS2Y cable, NA2XS2Y cable, N2XSY cable, NA2XSY cable, XLPE MV cable, medium voltage cable 30kV, European MV cable, IEC 60502-2 cable, DIN VDE 0276-620 cable, power distribution cable

Wind turbine medium voltage cables serve as the critical power transmission lifeline connecting wind turbine generators to step-up transformers and grid infrastructure. These cables must withstand extreme operational conditions including continuous mechanical stress from nacelle rotation, temperature fluctuations from -40°C to +90°C, and exposure to moisture in both onshore and offshore environments.

Technical Department

on12/12/2025

Wind Turbine Medium Voltage XLPE Power Cables12/20 (24) kV — Longitudinally & Radially Sealed

12/20 (24) kV XLPE-insulated cables manufactured by Anhui Feichun Special Cable Co., Ltd. feature longitudinal and radial water-blocking technology, ensuring reliable performance throughout the cable’s 30+ year design life. The cross-linked polyethylene (XLPE) insulation provides superior dielectric properties compared to traditional PVC, enabling higher operating temperatures and improved current-carrying capacity.

The designation codes N2XS(F)2Y, 2XS(F)2Y, and XUHKXS identify specific construction configurations compliant with DIN VDE, CENELEC HD, and national standards respectively.

Technical Department

on12/12/2025

What is Wind Turbine Cable?

The designation codes N2XS(F)2Y, 2XS(F)2Y, and XUHKXS identify specific construction configurations compliant with DIN VDE, CENELEC HD, and national standards respectively.

Wind turbine cables represent a critical component in renewable energy infrastructure, specifically engineered to transmit electrical power generated by wind turbines from the nacelle through the tower to ground-level transformer stations. The medium voltage XLPE (Cross-Linked Polyethylene) power cable rated at 8.7/15 (17.5) kV serves as the primary power transmission conduit in modern wind energy systems, designed to withstand the unique mechanical and environmental stresses inherent to wind turbine operations.

Technical Department

on11/12/2025

What is Wind Turbine Cable?

YHAKXS – Compliant with HD 620 S3:2023 Part 10 Section R | A2XSY – Per IEC 60502-2:2014 and BS 7870-4.10:2011 | NA2XSY – According to DIN VDE 0276-620:2018. These designations indicate aluminum conductor (A2X/NA2X) or copper conductor (YH) variants with XLPE insulation (X) and copper wire screen (S) with PVC outer sheath (Y).