[email protected]

bending radius specification

25 Min Read
PROTOMONT(MT) (N)SHOEU
Technical Department
on24/11/2025

PROTOMONT(MT) (N)SHOEU 1 kV Light & Flexible Rubber Cable

The designation (N)SHOEU within the German VDE cable nomenclature system identifies a specific cable construction optimized for applications requiring exceptional flexibility and reduced weight while maintaining robust environmental protection characteristics essential for industrial and mining applications. The single “S” designation, distinguishing (N)SHOEU from the double “SS” in NSSHOEU variants, signifies Strapazierfähig (heavy-duty) rather than Spezial Strapazierfähig (special heavy-duty), indicating an optimized balance between mechanical strength and flexibility. This optimization enables (N)SHOEU cables to achieve approximately fifteen to twenty-five percent weight reduction compared to NSSHOEU equivalents while maintaining adequate mechanical properties for applications not subjected to the most extreme stress conditions characteristic of coal cutter cable chain operations or heavy continuous miner trailing cable applications.
38 Min Read
PROTOMONT NSSHOEU .../3E 1 kV
Technical Department
on24/11/2025

PROTOMONT NSSHOEU …/3E 1 kV:

Underground mining electrical installations present extraordinary challenges distinguishing them from conventional industrial power distribution applications. The confined space constraints of underground workings limit access for cable installation and maintenance operations. The presence of moisture, whether from groundwater infiltration, ventilation condensation, or wet mining processes, creates persistent electrical insulation challenges. The mechanical stress imposed by coal cutting equipment, continuous miner operations, and mobile machinery movements subjects cables to continuous flexing, abrasion, and impact loading that would rapidly destroy standard industrial cables. The potential presence of explosive atmospheres in coal mines necessitates stringent electrical safety requirements preventing ignition sources. According to operational experience documented by Australian mining operations specialists, cable failures represent one of the leading causes of unplanned production interruptions in underground mining operations, with properly specified and installed cable systems demonstrating service lives of five to eight years compared to six to eighteen months for inadequately specified alternatives.
24 Min Read
TYPE 455 mining cables represent an optimized category of Class 2 heavy-duty elastomer-sheathed cables specifically engineered for applications demanding minimal cable diameter and reduced weight per meter while maintaining comprehensive electrical protection. Manufactured in strict accordance with AS/NZS 2802:2000 standards, these cables are designed for voltage ratings from 1.1 kilovolts to 11 kilovolts, with a construction philosophy emphasizing reduced insulation thickness and elimination of cradle separators to achieve lower overall mass and diameter. The incorporation of two earth conductors and one pilot conductor positioned in outer interstices, combined with EPR insulation and semiconductive screening systems, makes these cables particularly well-suited for stacker reclaimer installations, dragline operations, and other slow reeling applications where cable weight directly impacts equipment performance and operational efficiency. The design represents a strategic balance between electrical performance requirements and mechanical handling considerations, offering mining operations a purpose-built solution for specific application scenarios where traditional heavier cable constructions would impose unacceptable operational constraints.
Technical Department
on14/11/2025

What is TYPE 455 1.1 to 11kV Mining Cables to AS/NZS 2802:2000?

TYPE 455 mining cables represent an optimized category of Class 2 heavy-duty elastomer-sheathed cables specifically engineered for applications demanding minimal cable diameter and reduced weight per meter while maintaining comprehensive electrical protection. Manufactured in strict accordance with AS/NZS 2802:2000 standards, these cables are designed for voltage ratings from 1.1 kilovolts to 11 kilovolts, with a construction philosophy emphasizing reduced insulation thickness and elimination of cradle separators to achieve lower overall mass and diameter. The incorporation of two earth conductors and one pilot conductor positioned in outer interstices, combined with EPR insulation and semiconductive screening systems, makes these cables particularly well-suited for stacker reclaimer installations, dragline operations, and other slow reeling applications where cable weight directly impacts equipment performance and operational efficiency. The design represents a strategic balance between electrical performance requirements and mechanical handling considerations, offering mining operations a purpose-built solution for specific application scenarios where traditional heavier cable constructions would impose unacceptable operational constraints.