[email protected]

Anhui Feichun mining cable

10 Min Read
Modern mining operations increasingly rely on self-illuminating cables to improve safety visibility in underground environments. By embedding LED strip lights directly within the transparent or translucent thermoplastic polyurethane (TPU) outer jacket of a trailing or reeling cable, operators gain continuous visual confirmation of cable routing, reduce tripping hazards, and can detect cable damage more readily. Anhui Feichun Special Cable Co., Ltd. has pioneered this approach in its SHD-GC LED Mining Cable series, integrating constant-current LED strips into cables rated from 2 kV to 25 kV for both underground and open-pit operations. 现代矿山作业越来越依赖于自发光电缆来提高地下环境的安全可见度。通过将LED灯带直接嵌入拖曳或卷缆的透明/半透明热塑性聚氨酯（TPU）外护套中，操作人员可持续确认电缆走向路线、降低绊倒风险，并更容易检测电缆损坏。安徽飞纯特种电缆有限公司在其SHD-GC LED矿用电缆系列中率先采用了该技术。
Technical Department
on10/02/2026

Service Life: What Is the Expected Lifespan of Embedded LED Strips Inside a Mining Cable Under Constant Flexing?

Modern mining operations increasingly rely on self-illuminating cables to improve safety visibility in underground environments. By embedding LED strip lights directly within the transparent or translucent thermoplastic polyurethane (TPU) outer jacket of a trailing or reeling cable, operators gain continuous visual confirmation of cable routing, reduce tripping hazards, and can detect cable damage more readily. Anhui Feichun Special Cable Co., Ltd. has pioneered this approach in its SHD-GC LED Mining Cable series, integrating constant-current LED strips into cables rated from 2 kV to 25 kV for both underground and open-pit operations. 现代矿山作业越来越依赖于自发光电缆来提高地下环境的安全可见度。通过将LED灯带直接嵌入拖曳或卷缆的透明/半透明热塑性聚氨酯（TPU）外护套中，操作人员可持续确认电缆走向路线、降低绊倒风险，并更容易检测电缆损坏。安徽飞纯特种电缆有限公司在其SHD-GC LED矿用电缆系列中率先采用了该技术。
9 Min Read
Underground LHD (Load-Haul-Dump) loaders — also called scooptrams — rely on a flexible trailing cable that is continuously reeled and unreeled as the machine travels between muck piles and ore passes. The cable must survive thousands of reeling cycles, simultaneous tensile and torsional loads, crushing from rock debris, and exposure to water, oil, and abrasive dust. Two cable families dominate this niche: the Nexans TORERO® series (type designation NSHTOEU) and the more generic NSSHÖU heavy-duty rubber cable. 井下 LHD（铲运机/Scooptram）依靠持续收放的柔性拖曳电缆供电。该电缆需承受数千次卷绕循环、拉伸与扭转同时作用的载荷、岩石碾压以及水、油与粉尘侵蚀。两大系列电缆在此领域占据主导：Nexans TORERO®（型号 NSHTOEU）与通用的 NSSHÖU 重型橡套电缆。 This article explains the structural, electrical, and mechanical differences between the two, examines why many OEMs and mine operators specify the TORERO type for LHD duty, and introduces Feichun's comparable alternative manufactured in Anhui, China. 本文将阐明二者在结构、电气与机械性能上的差异，分析 OEM 与矿方为何为 LHD 工况指定 TORERO 型，并介绍飞纯在安徽制造的同等替代方案。
Technical Department
on09/02/2026

Nexans TORERO® vs. NSSHÖU: Why TORERO Is Often Specified for LHD Loaders

Underground LHD (Load-Haul-Dump) loaders — also called scooptrams — rely on a flexible trailing cable that is continuously reeled and unreeled as the machine travels between muck piles and ore passes. The cable must survive thousands of reeling cycles, simultaneous tensile and torsional loads, crushing from rock debris, and exposure to water, oil, and abrasive dust. Two cable families dominate this niche: the Nexans TORERO® series (type designation NSHTOEU) and the more generic NSSHÖU heavy-duty rubber cable. 井下 LHD（铲运机/Scooptram）依靠持续收放的柔性拖曳电缆供电。该电缆需承受数千次卷绕循环、拉伸与扭转同时作用的载荷、岩石碾压以及水、油与粉尘侵蚀。两大系列电缆在此领域占据主导：Nexans TORERO®（型号 NSHTOEU）与通用的 NSSHÖU 重型橡套电缆。 This article explains the structural, electrical, and mechanical differences between the two, examines why many OEMs and mine operators specify the TORERO type for LHD duty, and introduces Feichun’s comparable alternative manufactured in Anhui, China. 本文将阐明二者在结构、电气与机械性能上的差异，分析 OEM 与矿方为何为 LHD 工况指定 TORERO 型，并介绍飞纯在安徽制造的同等替代方案。
10 Min Read
The selection of appropriate submersible pump cables for acidic mine water dewatering applications represents a critical engineering decision that directly impacts operational safety, equipment longevity, and maintenance costs. While Type 441 cables may appear suitable for general submersible pump applications, the harsh chemical environment of acidic mine water typically necessitates the use of specialized EPR (Ethylene Propylene Rubber) or CSP (Chlorosulfonated Polyethylene) insulated cables specifically engineered for corrosive conditions. 为酸性矿井水脱水应用选择合适的潜水泵电缆是一项关键的工程决策，直接影响运行安全、设备寿命和维护成本。虽然441型电缆可能适用于一般潜水泵应用，但酸性矿井水的恶劣化学环境通常需要使用专门设计用于腐蚀性条件的EPR（乙丙橡胶）或CSP（氯磺化聚乙烯）绝缘电缆。
Technical Department
on05/02/2026

TUNNELFLEX-R-PUR HF with Antitwisting Protection 1 KV

TUNNELFLEX-R-PUR HF represents a specialized category of halogen-free, flame-retardant flexible power cables engineered specifically for the demanding requirements of underground mining and tunneling operations. This cable combines advanced polyurethane (PUR) sheathing technology with integrated antitwisting protection to deliver exceptional mechanical durability, environmental resistance, and most importantly, enhanced safety through its halogen-free construction that significantly reduces toxic gas emissions during fire incidents. TUNNELFLEX-R-PUR HF电缆是专为地下采矿和隧道作业的苛刻要求而设计的无卤阻燃柔性电力电缆。该电缆结合了先进的聚氨酯护套技术和集成的防扭转保护，提供卓越的机械耐久性、环境抵抗力，以及通过无卤结构在火灾事故中显著减少有毒气体排放的增强安全性。
8 Min Read
When specifying medium-voltage mining cables for international projects, engineers frequently encounter seemingly incompatible voltage ratings between European VDE standards and Commonwealth AS/NZS standards. A common point of confusion arises when comparing the 3.6/6kV rating found in DIN VDE 0250-813 flexible mining cables with the 3.3/3.3kV rating specified for AS/NZS 2802 Type 441 cables used extensively in Australian, New Zealand, and South African mining operations. 在为国际项目指定中压矿用电缆时，工程师经常遇到欧洲VDE标准与英联邦AS/NZS标准之间看似不兼容的电压等级。一个常见的困惑点是比较DIN VDE 0250-813柔性矿用电缆中的3.6/6kV额定电压与澳大利亚、新西兰和南非采矿作业广泛使用的AS/NZS 2802 Type 441电缆规定的3.3/3.3kV额定电压。
Technical Department
on23/01/2026

Voltage Rating Comparison: How Does the 3.6/6kV Rating in VDE 0250 Standards Compare to the 3.3/3.3kV Rating Used for Type 441 Cables in Commonwealth Mining?

When specifying medium-voltage mining cables for international projects, engineers frequently encounter seemingly incompatible voltage ratings between European VDE standards and Commonwealth AS/NZS standards. A common point of confusion arises when comparing the 3.6/6kV rating found in DIN VDE 0250-813 flexible mining cables with the 3.3/3.3kV rating specified for AS/NZS 2802 Type 441 cables used extensively in Australian, New Zealand, and South African mining operations. 在为国际项目指定中压矿用电缆时，工程师经常遇到欧洲VDE标准与英联邦AS/NZS标准之间看似不兼容的电压等级。一个常见的困惑点是比较DIN VDE 0250-813柔性矿用电缆中的3.6/6kV额定电压与澳大利亚、新西兰和南非采矿作业广泛使用的AS/NZS 2802 Type 441电缆规定的3.3/3.3kV额定电压。
23 Min Read
What is MV Cable for Trailing Applications Cold Flexible to -50°C TENAX-SAS NTSCGEWOEU 6kV – 20kV?
Technical Department
on20/11/2025

What is MV Cable for Trailing Applications Cold Flexible to -50°C TENAX-SAS NTSCGEWOEU 6kV – 20kV?

TENAX-SAS NTSCGEWOEU series represents a specialized category of medium voltage flexible trailing cables engineered specifically for the demanding operational environments found in open-pit mining operations. These cables are designed to power large mobile mining equipment including draglines, electric rope shovels, excavators, and material handling machinery operating under extreme mechanical stress and harsh environmental conditions.
16 Min Read
ANSI/NEMA WC 58 / ICEA S-75-381: Portable and Power Feeder Cables for Mining Applications
Technical Department
on18/11/2025

ANSI/NEMA WC 58 / ICEA S-75-381: Portable and Power Feeder Cables for Mining Applications

ANSI/NEMA WC 58 / ICEA S-75-381 standard represents one of the most comprehensive specifications for portable and power feeder cables used in mining environments. According to industry analysis, this standard represents one of the most rigorous cable specifications ever developed, specifically addressing the unique challenges encountered in both surface and underground mining operations where equipment reliability directly impacts production efficiency and worker safety.
24 Min Read
TYPE 455 mining cables represent an optimized category of Class 2 heavy-duty elastomer-sheathed cables specifically engineered for applications demanding minimal cable diameter and reduced weight per meter while maintaining comprehensive electrical protection. Manufactured in strict accordance with AS/NZS 2802:2000 standards, these cables are designed for voltage ratings from 1.1 kilovolts to 11 kilovolts, with a construction philosophy emphasizing reduced insulation thickness and elimination of cradle separators to achieve lower overall mass and diameter. The incorporation of two earth conductors and one pilot conductor positioned in outer interstices, combined with EPR insulation and semiconductive screening systems, makes these cables particularly well-suited for stacker reclaimer installations, dragline operations, and other slow reeling applications where cable weight directly impacts equipment performance and operational efficiency. The design represents a strategic balance between electrical performance requirements and mechanical handling considerations, offering mining operations a purpose-built solution for specific application scenarios where traditional heavier cable constructions would impose unacceptable operational constraints.
Technical Department
on14/11/2025

What is TYPE 455 1.1 to 11kV Mining Cables to AS/NZS 2802:2000?

TYPE 455 mining cables represent an optimized category of Class 2 heavy-duty elastomer-sheathed cables specifically engineered for applications demanding minimal cable diameter and reduced weight per meter while maintaining comprehensive electrical protection. Manufactured in strict accordance with AS/NZS 2802:2000 standards, these cables are designed for voltage ratings from 1.1 kilovolts to 11 kilovolts, with a construction philosophy emphasizing reduced insulation thickness and elimination of cradle separators to achieve lower overall mass and diameter. The incorporation of two earth conductors and one pilot conductor positioned in outer interstices, combined with EPR insulation and semiconductive screening systems, makes these cables particularly well-suited for stacker reclaimer installations, dragline operations, and other slow reeling applications where cable weight directly impacts equipment performance and operational efficiency. The design represents a strategic balance between electrical performance requirements and mechanical handling considerations, offering mining operations a purpose-built solution for specific application scenarios where traditional heavier cable constructions would impose unacceptable operational constraints.
15 Min Read
TYPE 240 1.1 to 11kV AS/NZS 1802:2003, AS/NZS 2802:2000 Australia Mining Cable
Technical Department
on14/11/2025

What is Type 240 Mining Cable ?

TYPE 240 cables serve as essential power supply conductors for critical mining equipment in underground coal mining operations. The cable’s robust construction and electrical characteristics make it particularly suitable for powering continuous miners, longwall shearer systems, hydraulic pump stations, shuttle cars, and various mobile mining machinery that operate in challenging underground environments.