[email protected]

3x70mm2 mining cable

2 Min Read
Geographic Location and Geothermal Context: Lihir Island is located within active volcanic caldera in Papua New Guinea. The island mining operation sits at the intersection of three extreme environmental challenges: (1) Geothermal activity—underground temperatures reach 80–120°C in adjacent zones, creating localized heat stress and sulfur gas emissions, (2) Marine salt spray—island location means constant ocean wind, depositing salt aerosol (
Technical Department
on09/03/2026

Lihir Gold Mine: Type 245 1.1/1.1kV 3x70mm² Trailing Cable for Island Geothermal Mining Projects

Geographic Location and Geothermal Context: Lihir Island is located within active volcanic caldera in Papua New Guinea. The island mining operation sits at the intersection of three extreme environmental challenges: (1) Geothermal activity—underground temperatures reach 80–120°C in adjacent zones, creating localized heat stress and sulfur gas emissions, (2) Marine salt spray—island location means constant ocean wind, depositing salt aerosol (
6 Min Read
The Crucial Clarification: Oyu Tolgoi operates in two fundamentally different electrical environments that must be clearly understood: (1) Surface operations and equipment transition zones (-40°C to +50°C, dry/cold storage, arctic conditions), and (2) Deep underground block cave extraction levels (15°C to 30°C, high humidity, wet/muddy conditions, geothermally warmed). 关键澄清：奥尤陶勒盖在两个根本不同的电气环境中运营，必须明确理解：(1)地面作业和设备过渡区(-40°C至+50°C，干燥/冷库存储，北极条件)，(2)深层地下自然崩落法采矿区(15°C至30°C，高湿度，潮湿/泥泞条件，地热升温)。 The Engineering Error Many Make: It is tempting to assume that since Oyu Tolgoi is in Mongolia (with harsh winter conditions), all cables should be Arctic Grade throughout the mining operation. This is fundamentally incorrect. The underground extraction level, located 1,300+ meters deep, operates in a completely different thermal and humidity regime than the surface—more similar to tropical underground mining conditions than arctic conditions.
Technical Department
on06/03/2026

Block Cave Power Supply: Choosing AS/NZS Type 275 Reeling Cables for Oyu Tolgoi Underground Systems

The Crucial Clarification: Oyu Tolgoi operates in two fundamentally different electrical environments that must be clearly understood: (1) Surface operations and equipment transition zones (-40°C to +50°C, dry/cold storage, arctic conditions), and (2) Deep underground block cave extraction levels (15°C to 30°C, high humidity, wet/muddy conditions, geothermally warmed). 关键澄清：奥尤陶勒盖在两个根本不同的电气环境中运营，必须明确理解：(1)地面作业和设备过渡区(-40°C至+50°C，干燥/冷库存储，北极条件)，(2)深层地下自然崩落法采矿区(15°C至30°C，高湿度，潮湿/泥泞条件，地热升温)。 The Engineering Error Many Make: It is tempting to assume that since Oyu Tolgoi is in Mongolia (with harsh winter conditions), all cables should be Arctic Grade throughout the mining operation. This is fundamentally incorrect. The underground extraction level, located 1,300+ meters deep, operates in a completely different thermal and humidity regime than the surface—more similar to tropical underground mining conditions than arctic conditions.
20 Min Read
Type 7S is a single-core, flexible mining machine cable designed for direct connection to motor terminals and equipment in high-vibration underground environments. When a specification calls for "Type 7S 3.3kV 3x70mm²," it refers to three separate, individual single-core cables (each one being 1x70mm² in cross-section), which are installed in trefoil formation (arranged in a triangular pattern) to create a complete three-phase power system for a conveyor drive motor. Each single core has its own 360-degree copper screening layer, Class 5 extra-flexible stranded conductors, and a signature glass fiber braid reinforcement layer that provides superior vibration and thermal resistance. This combination makes Type 7S the preferred cable choice for main conveyor systems in underground coal mines, where the motor is subject to continuous high-frequency vibration, the terminal space is confined, and flexibility is essential for reliable long-term operation.
Technical Department
on06/03/2026

Conveyor Belt Power: Specifying Type 7S 3.3kV 3x70mm² for Underground Coal Conveyors

Type 7S is a single-core, flexible mining machine cable designed for direct connection to motor terminals and equipment in high-vibration underground environments. When a specification calls for “Type 7S 3.3kV 3x70mm²,” it refers to three separate, individual single-core cables (each one being 1x70mm² in cross-section), which are installed in trefoil formation (arranged in a triangular pattern) to create a complete three-phase power system for a conveyor drive motor. Each single core has its own 360-degree copper screening layer, Class 5 extra-flexible stranded conductors, and a signature glass fiber braid reinforcement layer that provides superior vibration and thermal resistance. This combination makes Type 7S the preferred cable choice for main conveyor systems in underground coal mines, where the motor is subject to continuous high-frequency vibration, the terminal space is confined, and flexibility is essential for reliable long-term operation.
5 Min Read
PROTOMONT (V) NTSKCGECWOEU series represents advanced rubber-sheathed flexible cables specifically engineered for power supply connections in mobile mining equipment. These cables are primarily deployed in underground mining applications where coal cutting machines operate in conjunction with cable protection chains (cable handlers) that trail behind the machinery. The cable handler system is designed to absorb the substantial tensile forces generated during machine movement, ensuring operational continuity and cable longevity.
Technical Department
on15/12/2025

PROTOMONT (V) NTSKCGECWOEU 1.8/3KV Coal Cutter Cables for Chain Operation

PROTOMONT (V) NTSKCGECWOEU series represents advanced rubber-sheathed flexible cables specifically engineered for power supply connections in mobile mining equipment. These cables are primarily deployed in underground mining applications where coal cutting machines operate in conjunction with cable protection chains (cable handlers) that trail behind the machinery. The cable handler system is designed to absorb the substantial tensile forces generated during machine movement, ensuring operational continuity and cable longevity.