飞纯 Type 209 是飞纯电缆基于 AS/NZS 1802:2003 卷筒与拖曳电缆体系设计的矿用柔性馈电与拖曳电缆系列，电压范围覆盖 1.1 至 11KV。根据产品资料，Type 209 系列电缆主要作为矿山机械柔性馈电电缆使用，更适合作为拖曳电缆而不是高频卷筒电缆。较小规格适用于钻机、手持工具和移动设备。这一定义是理解 Type 209 的关键。Type 209 不是普通工业橡套软电缆，也不只是单纯的矿山供电线。它的核心定位是矿山机械柔性馈电电缆，也就是为矿山机械提供可移动、可拖曳、可适应复杂作业路径的供电系统。同时，它更适合作为拖曳电缆，即跟随设备移动的电缆，而不是长期高频卷绕使用的卷筒电缆。

on24/06/2026

什么是 H07RN8-F 450/750V Harmonized Rubber Cables

H07RN8-F 450/750V Harmonized Rubber Cables 是一种用于潜水泵和类似工业水下应用的重型柔性橡套电缆。根据资料说明，该电缆可用于工业用水环境，适用水深最高可达 10 m，水温范围最高可达 40℃，同时也适用于干燥、潮湿和湿润应用。Feichun 将其定位于矿山排水、地下工程排涝、港口泵站、码头检修排水、工业水池和移动潜水泵供电等场景。它的工程价值不是单纯“能进水”，而是在水压、潮湿、移动、拉拽、磨损和低压动力传输同时存在时，仍能通过 Class 5 多股铜导体、EI4 橡胶绝缘、EM2/EM3 内护套与 EM2 外护套形成稳定的电气与机械防护系统。

Technical Department

on22/06/2026

AS/NZS 1802/2802 矿用卷筒/拖曳电缆选型计算器：载流量、电压降、短路热稳定一页算清

面向电气工程师的 AS/NZS 1802/2802 电缆工具箱：从负载电流、卷筒降额到功率因数补偿和年损耗，快速形成选型依据

UNE 22512 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV y 0,6/1 kV con aislamiento de caucho, con armadura" (Flexible cables for underground mining, rubber-insulated, armoured) — exists as a parallel but fundamentally distinct standard from its unarmoured sibling UNE 22511. Where UNE 22511 is engineered as a torsion-optimized drag cable for mobile equipment, UNE 22512 is engineered as a crush-and-cut protected feeder cable for semi-fixed installations where mechanical damage from external forces (falling rock, equipment impact, floor pressure) is a documented operational risk, but the extreme torsional loading of continuously moving equipment is not. The addition of metallic armour — specifically, galvanized steel wire braid forming what the standard designates as M2 GSWB — is the defining structural choice that reshapes every downstream design decision in the cable. The armour is not merely a protective layer added to an otherwise standard cable; rather, it fundamentally alters the cable's mechanical behavior, installation requirements, cost structure, and applicable fatigue loading regimes. Understanding UNE 22512 therefore requires understanding not just what the armour is, but why its presence necessitates a completely different engineering philosophy compared to unarmoured cables. The standard was developed by AENOR (Asociación Española de Normalización y Certificación) to address a specific operational problem encountered in Spanish and Latin American underground mining installations. While drag cables experience cyclic torsional loading as the controlling mechanical stress, semi-fixed installation cables experience something categorically different: static or low-cycle crushing and cutting stresses from external impacts, combined with continuous exposure to abrasive underground surfaces and sharp rock edges. A cable optimized exclusively for torsional fatigue — such as UNE 22511 — when installed in a semi-fixed route subject to crushing and cutting, experiences mechanical failure not through fatigue mechanisms but through acute sheath penetration, insulation damage, and moisture ingress. Conversely, an armoured cable optimized for crush protection, if inappropriately installed in a drag duty application, fails not through crushing (which the armour prevents) but through torsional fatigue of the armour wires themselves — a more insidious failure mode that occurs entirely within the armour structure, invisible until complete armour failure exposes the underlying insulation.

Technical Department

on15/06/2026

卷筒电缆技术手册操作安装与电气

本手册中的弯曲半径、载流量、降容系数、压降与短路数据,依据 DIN VDE 0298-4、VDE 0250、IEC 等公开标准的通用工程值,适用于一般卷筒/移动电缆的技术说明与方案初选。具体工程须按项目实际工况核算;飞纯具体产品的型号、外径、重量、电缆盘规格等参数,以飞纯正式产品规格书与实测数据为准。安装应由专业人员执行,并参照适用标准与现场条件。

H07RN-F: Advanced High-Flexibility Salt-Fog Resistant Port Cable Engineering Solution Specialized rubber-sheathed electrical cable engineered for extreme maritime and coastal port environments. H07RN-F combines superior mechanical flexibility (4×D minimum fixed-laying bending radius, 6×D flexible-application capability) with comprehensive salt-fog environmental resistance, enabling reliable 450/750V power distribution and control signaling in container gantry systems, ship loaders, and port automation infrastructure where conventional cables fail within 6–12 months of deployment.

Technical Department

on11/06/2026

Что такое H05RN-F / 60245 IEC 57(YZW): резиновый кабель для ручных устройств, инспекционных ламп, декоративных световых цепей и лёгких workshop tools

H05RN-F / 60245 IEC 57(YZW) — это резиновый кабель среднего класса нагрузки для питания бытовых и лёгких профессиональных устройств: household devices, kitchens, offices, handheld inspection lamps, chains of decorative lights and lightweight workshop tools subject to medium loads. Он имеет dual certification CCC and VDE в части типоразмеров, соответствует EN 50525-2-21, GB/T 5013.4 and IEC 60245.4, рассчитан на U0/U 300/500 V, имеет test voltage 2000 V, fine-wire class 5 copper conductor, rubber type EI4 core insulation, black rubber type EM2 outer sheath, flame-retardant behaviour according to IEC 60332-1-2 and oil resistance according to EN 60811-404. Для Feichun этот кабель является хорошим примером лёгкого/среднего rubber-sheath cable; для портов, рудников и тяжёлых машин его нельзя путать с heavy-duty mining, reeling or tensile-resistant cable.

LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable

Technical Department

on11/06/2026

Что такое ÖLFLEX® 100 I: инженерный анализ ISI-маркированного ПВХ-кабеля до 1100 V

ÖLFLEX® 100 I — это ISI-маркированный ПВХ-кабель для plant engineering, installation, industrial machinery, air-conditioning power circuits, main power circuits to individual apartments and dry or damp interiors under medium mechanical load conditions. По предоставленным данным кабель построен на тонкопроволочных голых медных жилах class 5 по IS 8130-1984, имеет ПВХ-изоляцию, наружную оболочку PVC или PVC FR-LSH по IS 694:2010, номинальное напряжение до 1100 V и повышенную электрическую прочность за счёт испытательного напряжения 3 kV.

FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)

Technical Department

on11/06/2026

Что такое ÖLFLEX® TRAY 600 SC: инженерный анализ гибкого одножильного кабеля UL 2277 Flexible Motor Supply Cable

ÖLFLEX® TRAY 600 SC — это гибкий одножильный кабель с UL-сертификацией, предназначенный для motor power supply, plant engineering, industrial machinery, heating and air-conditioning systems, stage applications, outdoor use и wind turbine generator applications. По предоставленным данным он сочетает специальную ПВХ-изоляцию на базе UL 83 THW-2, специальную чёрную ПВХ-наружную оболочку, класс 5 тонкопроволочной медной жилы, UL 90°C WET rating, sunlight resistance, oil resistance, ozone resistance, salty spray resistance и улучшенные огнестойкие характеристики.

UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.

Technical Department

on11/06/2026

ТППшвАпд-нг(А)-HF：矿山通信、数据与供电组合低烟无卤电缆

ТППшвАпд-нг(А)-HF 是用于 горнорудная промышленность，即矿山工业的组合型通用通信电缆，执行 ТУ 27.32.13-216-00217082-2023。它把本地电话通信对、数据传输对和供电线芯集成在同一电缆结构中，可用于本地电话网络、爆炸危险环境中的本地通信、自动化系统、煤矿和矿井 аэрогазовая защита 气体空气保护系统，以及含化学活性物质的场所

BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan

Technical Department

on11/06/2026

什么是 КОВГ / КОВГН：6 kV 单芯高压柔性橡胶电缆

КОВГ 和 КОВГН 是额定电压 6 kV、频率 50 Hz 的单芯高压柔性电缆，执行 ТУ 16.К73.004-88。КОВГ 为铜导体、橡胶绝缘、橡胶护套的内部安装柔性电缆；КОВГН 为同类结构，但采用耐油且不传播燃烧的护套。该系列用于露天和地下矿山作业中的设备、成套产品和机构内部安装

Advanced High-Flexibility Salt-Fog Resistant Port Cable: Engineering Excellence for Extreme Maritime Environments A comprehensive technical deep-dive into Feichun's purpose-engineered high-flexibility port cable platform combining advanced electrochemical conductor protection, specialized EPR insulation, proprietary hydrophobic semi-conductive interfaces, and innovative outer-sheath chemistry—delivering extended service-life durability (12–15+ years field-validated) for demanding dredging, pumping, and floating-crane applications operating in harsh tropical and subtropical saltwater port facilities worldwide.

Technical Department

on11/06/2026

什么是 КПГ, КПГН, КПГСН, КПГУ：0.38/0.66 kV 柔性动力电缆

КГЭТЭШм 是一种用于地下采矿移动机器和机构的柔性屏蔽动力电缆，适用于带 частотным регулированием 的电气网络，也就是带变频调速控制的矿山供电系统。该型号额定交流电压为 3.3 kV 和 6 kV，执行 ТУ 16.К73.059-2021，火灾危险等级按 ГОСТ 31565-2012 为 О1.8.2.5.4，产品分类代码为 ОКПД2 27.32.13.129。它的结构核心不是普通橡套电缆的单层防护，而是主线芯屏蔽、分裂接地线、铜丝总屏蔽、耐热橡胶绝缘和高耐磨抗撕裂护套共同组成的中压变频矿山移动供电系统

5 Min Read

Technical Department

on11/06/2026

什么是 КГЭТУКШм：1.14、3.3 与 6 kV 专利结构柔性屏蔽矿山动力电缆

КГЭТУКШм 是一种用于地下采矿移动机器和机构的柔性屏蔽矿山动力电缆，额定交流电压覆盖 1.14 kV、3.3 kV 和 6 kV，主线芯用于动力供电，辅助线芯最高至 220 V。资料显示，1.14 kV 版本执行 ТУ 16.К73.063-2002，3.3 kV 和 6 kV 版本执行 ТУ 16.К73.059-2001。其结构受 АО «НИКИ г. Томск» 实用新型专利 №178217《Силовой гибкий экранированный кабель》保护，并符合 Ростехнадзор 在工业安全领域的要求

Multi-Purpose Industrial Cable FLEXIDRUM® SPECIAL R 702 Highly Flexible, Customizable Cable for Heavy Appliances & Vertical Use ⚡ Voltage: 0.6/1 kV OR 300/500 V 🔧 Speed: 120 m/min max 🎯 Configurations: 40+ SKUs, fully customizable 🌡️ Temperature: −50 to +90°C Nominal Voltage 0.6/1 kV OR 300/500 V (customer selection) Test Voltage 4 kV / 2 kV Depending on voltage class Max Speed 120 m/min Moderate-speed reeling applications Operating Temp −50 to +90°C Fixed & flexible laying (highest in class) Bending Radius 3×d to 7.5×D Depends on application mode & cable size Configurations 40+ Power, control, signal, fiber-optic integration

Technical Department

on11/06/2026

什么是 КГЭТКШм：1.14 / 3.3 kV 矿用移动机械柔性屏蔽铠装动力电缆

КГЭТКШм 是一种用于 шахтные передвижные машины и механизмы 矿用移动机器和机构的柔性屏蔽动力电缆，适用于主线芯额定交流电压 1.14 kV 和 3.3 kV、频率至 50 Hz 的电网，辅助线芯电压至 380 V。该电缆采用乙丙橡胶基耐热绝缘、可剥离导电橡胶主芯屏蔽、分裂接地线、双层导电耐油内护套、铜钢线束铠装，以及耐油不延燃且耐磨抗撕裂的外护套，是面向矿山移动设备高机械应力环境的强化型电缆

FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU: Advanced High-Flexibility Salt-Fog Resistant Port Cable Professional-grade high-flexibility submersible and overhead power cable engineered for extreme saltwater port environments, combining minimized bending radius (12×D drum deployment), superior salt-fog corrosion resistance, and UV/ozone/moisture immunity across 3.6/6 kV to 12/20 kV voltage platforms. Purpose-designed for dredgers, marine pumps, port cranes, and harbor equipment requiring proven long-service-life durability in corrosive maritime climates. Port Infrastructure Cable Evolution: Specialized Anti-Corrosion Engineering for Harsh Maritime Environments Conventional power distribution cables deployed in salt-fog maritime environments encounter accelerated degradation mechanisms: halide-induced electrochemical corrosion of copper conductor-surface oxidation states, osmotic water ingress through outer-sheath micro-fractures, photochemical UV-degradation of polymer matrix structures, and ozone-oxidation polymer cross-linking embrittlement. Standard FLEXIDRUM® cables (unspecialized polymeric sheathing) experience ~35–50% loss of mechanical tensile strength within 7–10 years of continuous port-operation exposure, necessitating premature replacement cycles and unanticipated maintenance disruptions in mission-critical dredging and port-equipment installations. The FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU represents a materials-chemistry and sheath-architecture breakthrough, integrating: (1) specialized PCP outer-sheath compound incorporating proprietary salt-fog-inhibition chemistry (sodium-chloride penetration resistance rated 2× superior to standard PCP formulations per IEC testing protocols), (2) advanced multi-layer semi-conductive screen interfaces with hydrophobic molecular structure preventing electrochemical corrosion pathways on tinned copper conductors, (3) integrated UV/ozone absorption additives reducing polymer chain-scission degradation by ~60% over 15+ year service intervals, and (4) optimized flexibility architecture enabling 12×D drum deployment radius (vs. 15×D and higher for conventional specialized cables) critical for mobile dredging equipment requiring frequent redeployment across geographically distributed port facilities.

Technical Department

on11/06/2026

什么是 КГЭШ, КГЭТШ：1.14 kV 井下矿用柔性屏蔽动力电缆

КГЭШ 与 КГЭТШ 是俄标体系下的井下矿用柔性屏蔽动力电缆。资料将其定义为：带铜导体、橡胶绝缘、弹性导电屏蔽、橡胶护套的矿用柔性动力电缆，额定交流电压为 1.14 kV，执行 ТУ 16.К73.012。这类电缆面向井下采矿设备、移动或半移动矿山机械、动力馈电与辅助回路组合供电场景，其设计重点不是固定敷设，而是在矿山环境中同时满足柔性、屏蔽、阻燃、抗拉、抗扭、弯曲疲劳和电气安全

Technical Department

on11/06/2026

什么是 HoldMine КГЭЖ1, HoldMine КГЭЖ2：自走式矿车用柔性屏蔽动力电缆

HoldMine КГЭЖ1 和 HoldMine КГЭЖ2 是用于 самоходные вагоны 自走式矿车的柔性屏蔽动力电缆，资料定义为“Кабели силовые гибкие экранированные для самоходных вагонов”。它们用于将带电驱动的自走式矿车连接到 50 Hz 交流电网，额定电压为 1140 V。两者均采用第 5 类柔性铜导体、橡胶绝缘、导电橡胶个别屏蔽和聚氨酯护套；其中 HoldMine КГЭЖ2 采用双层热塑性聚氨酯护套，并在层间设置加强元素，具有更高的耐磨和抗撕裂能力

FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun's revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.

Technical Department

on11/06/2026

什么是 GOST КГЭЖ ：井下自走车辆用柔性屏蔽动力电缆

КГЭЖ 与 HoldMine КГЭпЖ 是用于地下采矿自走车辆的柔性屏蔽动力电缆，资料将其定义为 Кабели силовые гибкие экранированные для самоходных вагонов。它们服务的不是普通地面移动设备，而是 подземные горные работы 井下采矿作业中带电驱动的 самоходные вагоны 自走车辆。电缆主线芯用于 1140 V、50 Hz 交流动力供电，辅助线芯用于 220 V 辅助回路。其结构采用第 5 类多股铜导体、橡胶绝缘、导电橡胶屏蔽、合成线增强束、成型增强芯和耐油阻燃橡胶护套，核心目标是在狭窄、潮湿、磨损、弯折频繁的井下移动环境中，提供动力供电、辅助控制和屏蔽安全的统一电缆方案

Technical Department

on11/06/2026

什么是 GOST/EAC КГЭС：自走式矿车用柔性屏蔽动力电缆

КГЭС 是一种用于 самоходные вагоны 自走式矿车的柔性屏蔽动力电缆，俄文资料定义为“Кабель силовой гибкий экранированный для самоходных вагонов”。它用于将带电驱动的自走式矿车连接到 50 Hz 交流电网，主线芯额定电压为 1140 V，辅助线芯额定电压为 220 V。该电缆采用第 5 类柔性铜导体、橡胶绝缘、导电橡胶个别屏蔽、合成线加强绞束和耐油不延燃橡胶护套，适合矿用移动车辆的弯曲、折弯、油污和单根敷设安全要求

Technical Department

on11/06/2026

什么是 GOST/EAC 标准 КОГЭШ, КОГРЭШ：0.66 kV 矿用特别柔性动力电缆工程解析

КОГЭШ 和 КОГРЭШ 是额定电压 0.66 kV 的矿用特别柔性动力电缆，俄文资料定义为“Кабели силовые особо гибкие шахтные на напряжение 0,66 кВ”。它们用于将 шахтный бурильный электроинструмент 矿用钻探电动工具连接到带绝缘中性点的 660 V、50 Hz 电网。两者的核心差异在于屏蔽结构：КОГРЭШ 采用 individual screen 个别屏蔽，КОГЭШ 采用 belt screen 腰带屏蔽并配合导电橡胶芯部

Technical Department

on11/06/2026

什么是 КРЭВБбШ、КРЭВКШв、КРЭВКбШ、КВЭмВБбШ、КВЭмВКШ、КВЭмВКбШ、КПвЭмВБбШ、КПвЭмВКШ、КПвЭмВКбШ、КРЭВБбШв 高电气安全铠装矿山动力电缆：0.66、1.2 和 6 kV 屏蔽铠装供电系统工程解析

armoured mining power cable 6 kV 6 kV 铠装屏蔽矿山动力电缆用于矿山中压馈电、变电站到设备区供电。 enhanced electrical safety mining cable повышенной электробезопасности 强调接地、屏蔽、铠装和故障安全。 screened armoured cable with PE and auxiliary core 3×S + 接地线芯 + 辅助线芯 + 铜丝屏蔽同时服务动力、保护接地和辅助监测/控制。 water blocked mining cable г、2г、гж、2гж 密封结构护套破损后限制水分沿电缆纵向传播。 low fire hazard mining cable PVC 低火灾危险、无卤聚合物、阻燃橡胶、无卤 TPU 适合矿山巷道、地下空间和人员安全要求更高的区域。 cold resistant armoured cable нг(А)-ХЛ 可至 -60°C 寒冷地区露天矿山、井口、地面变电站到井下入口。 7.5D bending radius cable 最小敷设弯曲半径 ≥ 7.5Dн 指导托架、转弯、井下敷设和牵引路径设计。

Comprehensive Technical Analysis of Chlorinated Polyethylene (CPE) vs Chlorosulphonated Polyethylene (CSP) Sheath Performance Under Extreme UV Radiation in Pilbara Region Mining Operations 氯化聚乙烯(CPE)与氯磺化聚乙烯(CSP)护套在皮尔巴拉地区采矿作业极端紫外线辐射下性能的综合技术分析

Technical Department

on05/02/2026

PROTOLON(SB) SHD-GC I 5 – 15 KV

Shielded Heavy-Duty Ground Check Cables (SHD-GC) are specialized power supply and connection cables designed for large material handling equipment such as excavators in opencast mining operations. These cables withstand extremely high mechanical stresses and are particularly suitable for trailing operations where abrasion and chafing stresses are expected.

To appreciate the ingenious engineering behind Type 440 cable design, we must first understand the mechanical challenges that mining cables face in their demanding service environment. Imagine a heavy-duty power cable trailing behind a massive dragline excavator as it moves across an open-pit mine. This cable must deliver reliable electrical power while simultaneously withstanding crushing forces when the excavator's tracks pass over it, resisting abrasion from sharp rock surfaces, and maintaining flexibility through countless cycles of bending and twisting movements. 要理解Type 440电缆设计背后的巧妙工程，我们必须首先了解矿用电缆在苛刻服务环境中面临的机械挑战。想象一根重型电力电缆拖在大型拉铲挖掘机后面，当它在露天矿中移动时，这根电缆必须提供可靠的电力，同时承受挖掘机履带经过时的压碎力、抵抗尖锐岩石表面的磨损，并在无数次弯曲和扭转运动中保持柔韧性。

Technical Department

on05/02/2026

TROMMELFLEX-M-PUR BRAIDED D2X11Y 1 KV

TROMMELFLEX-M-PUR represents a specialized category of flexible low voltage reeling cables engineered specifically for the demanding conditions of underground mining and tunneling operations. This cable features optimized dimensions and a flame-retardant, halogen-free polyurethane outer sheath, making it ideal for power supply to mobile underground equipment including drilling machines, Load-Haul-Dump (LHD) loaders, and scoops that operate under frequently changing dynamic loads during reeling operations. TROMMELFLEX-M-PUR电缆是专为地下采矿和隧道作业的苛刻条件而设计的特种柔性低压卷筒电缆。该电缆具有优化的尺寸设计和阻燃、无卤聚氨酯外护套，特别适合为钻机、装载-运输-卸载（LHD）装载机和铲运机等移动地下设备提供电力，这些设备在卷绕操作中承受频繁变化的动态负载。