[email protected]

Nexans Olex mining cable

16 Min Read
Feichun AS/NZS 1972 Type 2S 3.3kV cables can serve as direct drop-in replacements for Olex Nexans Versolex Type 2S mining cables, provided that the specifications are matched cross-section for cross-section and that the installation environment confirms compliance with AS/NZS 1972 requirements. However, this replacement is not automatic or universal. It requires careful verification of your existing Olex cable specifications, comparison against Feichun's equivalent product line, validation of termination compatibility, and confirmation that your mining site's electrical protection systems (earth leakage relays, neutral earthing resistors, and protection settings) are appropriately configured for the replacement cable's impedance characteristics.
Technical Department
on06/03/2026

Drop-in SWA Replacement for Olex Versolex Type 2S 3.3kV Underground Power Cable

Feichun AS/NZS 1972 Type 2S 3.3kV cables can serve as direct drop-in replacements for Olex Nexans Versolex Type 2S mining cables, provided that the specifications are matched cross-section for cross-section and that the installation environment confirms compliance with AS/NZS 1972 requirements. However, this replacement is not automatic or universal. It requires careful verification of your existing Olex cable specifications, comparison against Feichun’s equivalent product line, validation of termination compatibility, and confirmation that your mining site’s electrical protection systems (earth leakage relays, neutral earthing resistors, and protection settings) are appropriately configured for the replacement cable’s impedance characteristics.
16 Min Read
The AS/NZS 1802 Type 241 3x35mm² 1.1kV mining cable has a total weight of approximately 2,980 kilograms per kilometer, with copper content contributing roughly 1,500 kilograms per kilometer of that total. This cable has a 43.1 millimeter nominal outer diameter (tolerance range 41.5–44.5mm), carries an ampacity rating of 147 amperes in free air at 90°C conductor temperature, and is constructed from three 35mm² power conductors, three 16mm² interstitial grounding conductors, and one 16mm² central extensible pilot conductor (the latter typically used for remote control signaling in mining equipment). The cable is built to AS/NZS 1802 standard using EPR (ethylene propylene rubber) insulation and heavy-duty HD-85-PCP (polychloroprene) outer sheath, making it ideally suited for the extreme mechanical and thermal stresses of underground coal mining trailing cable applications—continuous miners, pump power supplies, and general mining equipment feeder systems. However, this specification applies exclusively to authentic AS/NZS 1802 Type 241 cables. Understanding this distinction is critical because many engineers and procurement teams encounter confusion when they search for "Olex Type 241" or "Versolex Type 241 equivalent," terms that conflate two fundamentally different product families with completely different material systems, standards, and field applications.
Technical Department
on05/03/2026

AS/NZS 1802 Type 241 3x35mm² 1.1kV Weight Calculator: Complete Specifications and Why Versolex Is Not Type 241

The AS/NZS 1802 Type 241 3x35mm² 1.1kV mining cable has a total weight of approximately 2,980 kilograms per kilometer, with copper content contributing roughly 1,500 kilograms per kilometer of that total. This cable has a 43.1 millimeter nominal outer diameter (tolerance range 41.5–44.5mm), carries an ampacity rating of 147 amperes in free air at 90°C conductor temperature, and is constructed from three 35mm² power conductors, three 16mm² interstitial grounding conductors, and one 16mm² central extensible pilot conductor (the latter typically used for remote control signaling in mining equipment). The cable is built to AS/NZS 1802 standard using EPR (ethylene propylene rubber) insulation and heavy-duty HD-85-PCP (polychloroprene) outer sheath, making it ideally suited for the extreme mechanical and thermal stresses of underground coal mining trailing cable applications—continuous miners, pump power supplies, and general mining equipment feeder systems. However, this specification applies exclusively to authentic AS/NZS 1802 Type 241 cables. Understanding this distinction is critical because many engineers and procurement teams encounter confusion when they search for “Olex Type 241” or “Versolex Type 241 equivalent,” terms that conflate two fundamentally different product families with completely different material systems, standards, and field applications.