[email protected]

mining pump feeder cable

20 Min Read
The nominal outer diameter (OD) of an AS/NZS 1802 Type 241 3.3/3.3kV 3x50mm² mining cable is 57.6 millimeters, with an acceptable manufacturing tolerance range of 55.5 millimeters (minimum) to 59.5 millimeters (maximum). This specification represents approximately 2.27 inches nominal diameter, translating to a tolerance band of ±1.5 millimeters around the nominal value. The cable includes three 50mm² power-carrying cores, three 10mm² (or optionally 16mm²) interstitial grounding conductors, and one 16mm² central extensible pilot conductor, all protected by an outer sheath of heavy-duty polychloroprene (HD-85-PCP) elastomer. At this nominal diameter, the complete cable assembly weighs approximately 5,250 kilograms per kilometer, with the copper mass contributing roughly 1,850 kilograms per kilometer of that total weight.
Technical Department
on05/03/2026

AS/NZS 1802 Type 241 3.3/3.3kV 3x50mm² Mining Cable Outer Diameter: Complete OD Specifications & Dimensional Design Guide

The nominal outer diameter (OD) of an AS/NZS 1802 Type 241 3.3/3.3kV 3x50mm² mining cable is 57.6 millimeters, with an acceptable manufacturing tolerance range of 55.5 millimeters (minimum) to 59.5 millimeters (maximum). This specification represents approximately 2.27 inches nominal diameter, translating to a tolerance band of ±1.5 millimeters around the nominal value. The cable includes three 50mm² power-carrying cores, three 10mm² (or optionally 16mm²) interstitial grounding conductors, and one 16mm² central extensible pilot conductor, all protected by an outer sheath of heavy-duty polychloroprene (HD-85-PCP) elastomer. At this nominal diameter, the complete cable assembly weighs approximately 5,250 kilograms per kilometer, with the copper mass contributing roughly 1,850 kilograms per kilometer of that total weight.
16 Min Read
TYPE 412 1.1kV Mining Cables to AS/NZS 2802:2000
Technical Department
on14/11/2025

TYPE 412 1.1kV Mining Cables to AS/NZS 2802:2000

TYPE 412 1.1kV mining cable represents a specialized category of heavy-duty armoured power cable engineered specifically for demanding mining operations where maximum mechanical protection and high impact resistance are paramount. Manufactured in strict compliance with the AS/NZS 2802:2000 standard, these cables serve as feeder conductors in applications where equipment damage from external impacts, crushing forces, and severe environmental conditions poses significant operational risks.