[email protected]

Low Voltage Reeling

18 Min Read
Full equivalent to Prysmian TROMMELFLEX® / Draka NSHTÖU-J (also searched as NSHTOEU-J or NSHTOU-J) 4G95 0.6/1 kV — heavy-duty LV reeling cable for STS/RTG port cranes, bridge/gantry cranes, grab operations, steel mills, mining plants. Letter-by-letter decoding of NSHTÖU-J per DIN VDE 0250-814. Specs: 4×95 mm² (3L+PE), OD 47–51.5 mm, weight ~5,200 kg/km, Cu ~3,648 kg/km, current 296 A (30°C), short-circuit 11.59 kA (1s), bend 10–12×OD, speed 120 m/min, tensile ~5,700 N, -25/+80°C. Tinned Cu class 5, EPR ≥3GI3, chloroprene 5GM5 sheath. Derating factors for multi-layer winding per VDE 0298-4. Pricing: Prysmian €18–35/m vs Feichun FC-TRM €8–16/m (50–60% savings). Ships 3–7 days from stock (confirmed March 2026). EAC, GOST-R, CE.
Technical Department
on12/03/2026

Китайский аналог Draka/Prysmian: барабанный кабель NSHTÖU-J 4G95 0.6/1 kV в наличии — расшифровка, характеристики, цена

Full equivalent to Prysmian TROMMELFLEX® / Draka NSHTÖU-J (also searched as NSHTOEU-J or NSHTOU-J) 4G95 0.6/1 kV — heavy-duty LV reeling cable for STS/RTG port cranes, bridge/gantry cranes, grab operations, steel mills, mining plants. Letter-by-letter decoding of NSHTÖU-J per DIN VDE 0250-814. Specs: 4×95 mm² (3L+PE), OD 47–51.5 mm, weight ~5,200 kg/km, Cu ~3,648 kg/km, current 296 A (30°C), short-circuit 11.59 kA (1s), bend 10–12×OD, speed 120 m/min, tensile ~5,700 N, -25/+80°C. Tinned Cu class 5, EPR ≥3GI3, chloroprene 5GM5 sheath. Derating factors for multi-layer winding per VDE 0298-4. Pricing: Prysmian €18–35/m vs Feichun FC-TRM €8–16/m (50–60% savings). Ships 3–7 days from stock (confirmed March 2026). EAC, GOST-R, CE.
20 Min Read
The 1-second short-circuit current rating for an NSHTÖU-J 4G95 0.6/1kV low-voltage heavy-duty reeling cable is approximately 8,500 to 10,200 amperes when the cable is new and at reference condition (20°C conductor temperature, single conductor in free air, no mechanical stress or aging degradation).
Technical Department
on27/02/2026

Short-Circuit Rating: What is the 1-second short-circuit current for NSHTÖU-J 4G95 0.6/1kV heavy-duty reeling cable? 

The 1-second short-circuit current rating for an NSHTÖU-J 4G95 0.6/1kV low-voltage heavy-duty reeling cable is approximately 8,500 to 10,200 amperes when the cable is new and at reference condition (20°C conductor temperature, single conductor in free air, no mechanical stress or aging degradation).
16 Min Read
NSHTÖU-J 4G16 0.6/1kV flexible rubber cable weighs approximately 1.17 to 1.30 kilograms per meter, depending on the specific manufacturing tolerance and the composition of the outer sheath material used by your cable supplier. This means that a 100-meter length of cable would weigh roughly 117 to 130 kilograms — about the weight of a fully grown man for every 100 meters of cable. Understanding what this weight represents, where it comes from, and how it affects your equipment design and installation planning is far more valuable than simply knowing the number. NSHTÖU-J 4G16 电缆的每米重量约为 1.17 至 1.30 千克，具体取决于制造公差和外护套材料。
Technical Department
on26/02/2026

Weight Calculator: What is the Weight per Meter of NSHTÖU-J 4G16 0.6/1kV Flexible Rubber Cable?

NSHTÖU-J 4G16 0.6/1kV flexible rubber cable weighs approximately 1.17 to 1.30 kilograms per meter, depending on the specific manufacturing tolerance and the composition of the outer sheath material used by your cable supplier. This means that a 100-meter length of cable would weigh roughly 117 to 130 kilograms — about the weight of a fully grown man for every 100 meters of cable. Understanding what this weight represents, where it comes from, and how it affects your equipment design and installation planning is far more valuable than simply knowing the number. NSHTÖU-J 4G16 电缆的每米重量约为 1.17 至 1.30 千克，具体取决于制造公差和外护套材料。
20 Min Read
NSHTÖU cables, this limit is 15 newtons per square millimeter. This specification is not arbitrary—it is determined through extensive materials testing and represents the maximum sustained tensile stress that the copper conductors and the surrounding insulation can endure without permanent plastic deformation or rupture. When a cable is subjected to tension exceeding this limit, the copper conductors begin to yield, permanently elongating and losing mechanical strength. The insulation, which is bonded to the conductors, separates from them as the conductors stretch. The result is a cable that may appear to function electrically but is mechanically compromised and unsafe for continued operation.
Technical Department
on26/02/2026

Cable Tension Formula: Setting Motor Torque on Cavotec Reels for NSHTÖU Cables

NSHTÖU cables, this limit is 15 newtons per square millimeter. This specification is not arbitrary—it is determined through extensive materials testing and represents the maximum sustained tensile stress that the copper conductors and the surrounding insulation can endure without permanent plastic deformation or rupture. When a cable is subjected to tension exceeding this limit, the copper conductors begin to yield, permanently elongating and losing mechanical strength. The insulation, which is bonded to the conductors, separates from them as the conductors stretch. The result is a cable that may appear to function electrically but is mechanically compromised and unsafe for continued operation.