Short Circuit Rating: Earth Screen Fault Capacity for AS/NZS 1972 Type 2S XLPE Cables
A Type 2S 3.3kV XLPE mining cable with a 3×95mm² conductor cross-section has two completely independent short circuit ratings: the phase conductor short circuit rating of approximately 13.6 kiloamperes (meaning the three phase conductors can withstand a three-phase symmetrical fault current of 13.6 kA for up to one second before reaching their 250°C thermal limit), and the earth screen fault capacity of approximately 5.0 kiloamperes (meaning the individual copper or copper-alloy screening layer surrounding each phase conductor can safely conduct a phase-to-earth fault current of 5.0 kA for the duration of a protective relay response, typically 50–100 milliseconds). These two ratings are not alternatives or overlapping specifications—they describe different physical paths through which fault current flows, different insulation stress scenarios, and different design objectives. Understanding why these two ratings exist, how they differ, and how they interact with mine protection systems is essential for any electrical engineer designing or specifying cable systems in underground coal mines.



![What is the Maximum Conductor Operating Temperature Allowed for VDE Cables Insulated with EPR (90°C) vs. Older Rubber Types? 4 The maximum conductor operating temperature is a critical parameter that determines a cable's current-carrying capacity, service life, and application suitability. For VDE-certified cables, EPR (Ethylene Propylene Rubber) insulation permits a continuous conductor operating temperature of 90°C, representing a significant advancement over older rubber insulation technologies which were typically limited to 60°C–70°C.[1][2] 最高导体工作温度是决定电缆载流量、使用寿命和应用适用性的关键参数。对于VDE认证电缆,EPR(乙丙橡胶)绝缘允许90°C的连续导体工作温度,相比传统橡胶绝缘(60°C–70°C)有显著提升。](https://feichuncables.com/blog/wp-content/uploads/image-574.avif)
