[email protected]

abrasion resistant power cable

9 Min Read
ThyssenKrupp manufactures some of the world's largest bulk material handling equipment, including stacker reclaimers that can handle thousands of tons of material (iron ore, coal, phosphate) daily in open-pit mining and port environments. These massive machines—often exceeding 50+ meters in height and 300+ meters in length—require electrical power in the megawatt range (5–15 MW typical for large stacker reclaimers) delivered via heavy-duty reeling cables that can withstand continuous deployment and rapid retraction. 蒂森克虏伯制造世界上一些最大的散货搬运设备，包括能够每天处理数千吨物料(铁矿石、煤炭、磷酸盐)的堆取料机，在露天采矿和港口环境中运行。这些庞大机器——通常超过50米高、300多米长——需要兆瓦级电力(典型大型堆取料机5-15兆瓦)，通过能够承受连续部署和快速收回的重型卷筒电缆传输。 System Architecture: A large stacker reclaimer comprises: (1) main structure (steel boom, buckets, conveyor systems), (2) electric motors (ranging from 300 kW to several megawatts), (3) reeling drum system with cable capacity 1000+ meters, (4) high-speed gearbox and transmission system enabling 120–160 m/min travel speed. The electrical power system typically operates at 6.6kV nominal (sometimes 11kV for the largest systems), with power distribution from the mine substation to the mobile reclaimer through trailing cables that must flex continuously.
Technical Department
on05/03/2026

ThyssenKrupp Stacker Reclaimers: Matching VDE Mechanicals with 6.6/6.6kV Australian Voltages

ThyssenKrupp manufactures some of the world’s largest bulk material handling equipment, including stacker reclaimers that can handle thousands of tons of material (iron ore, coal, phosphate) daily in open-pit mining and port environments. These massive machines—often exceeding 50+ meters in height and 300+ meters in length—require electrical power in the megawatt range (5–15 MW typical for large stacker reclaimers) delivered via heavy-duty reeling cables that can withstand continuous deployment and rapid retraction. 蒂森克虏伯制造世界上一些最大的散货搬运设备，包括能够每天处理数千吨物料(铁矿石、煤炭、磷酸盐)的堆取料机，在露天采矿和港口环境中运行。这些庞大机器——通常超过50米高、300多米长——需要兆瓦级电力(典型大型堆取料机5-15兆瓦)，通过能够承受连续部署和快速收回的重型卷筒电缆传输。 System Architecture: A large stacker reclaimer comprises: (1) main structure (steel boom, buckets, conveyor systems), (2) electric motors (ranging from 300 kW to several megawatts), (3) reeling drum system with cable capacity 1000+ meters, (4) high-speed gearbox and transmission system enabling 120–160 m/min travel speed. The electrical power system typically operates at 6.6kV nominal (sometimes 11kV for the largest systems), with power distribution from the mine substation to the mobile reclaimer through trailing cables that must flex continuously.
11 Min Read
The Pilbara region of Western Australia hosts some of the world's largest iron ore mines operated by BHP, Rio Tinto, and Fortescue. The mining environment is defined by extremes: surface temperatures regularly exceed 45–50°C during summer months, UV radiation intensity is among the highest in Australia, iron ore is extraordinarily hard and sharp-edged (causing accelerated cable abrasion), and equipment operates in remote locations with minimal maintenance infrastructure. 澳洲西部皮尔巴拉地区拥有世界上一些最大的铁矿，由必和必拓、力拓和富瑞斯经营。采矿环境由极端条件定义：夏季地表温度常超45–50°C，紫外线强度是澳洲最高的，铁矿石异常坚硬且边缘锋利(导致电缆加速磨损)，设备在维护基础设施最少的偏远位置运行。 Bucket Wheel Excavator Operations: A bucket wheel excavator (BWE) is a massive rotating machine that mines iron ore by continuous removal of overburden and ore. A typical Pilbara BWE operates 24/7 during mine production, with bucket wheel rotation speeds creating enormous dynamic electrical loads. A single large BWE power demand can reach 5–8 megawatts, requiring 22kV or higher voltage transmission from the main mine substation to the mobile machine. Cable Deployment Requirements: BWE power cables are deployed as trailing cables—the cable unrolls from a reeling drum as the BWE advances through the mine pit, accumulating 500+ meters of cable length during extended operation. When the excavator repositions, the cable must be rapidly re-wound under high tension. This extreme dynamic flexing (20,000–50,000 cycles per year) combined with harsh environmental exposure (temperature, UV, abrasion) creates unprecedented cable engineering challenges.
Technical Department
on05/03/2026

Pilbara Iron Ore Standard: Sourcing (N)TSKCGEWÖU 3×240+3×120/3 22/22kV for Bucket Wheel Excavators

The Pilbara region of Western Australia hosts some of the world’s largest iron ore mines operated by BHP, Rio Tinto, and Fortescue. The mining environment is defined by extremes: surface temperatures regularly exceed 45–50°C during summer months, UV radiation intensity is among the highest in Australia, iron ore is extraordinarily hard and sharp-edged (causing accelerated cable abrasion), and equipment operates in remote locations with minimal maintenance infrastructure. 澳洲西部皮尔巴拉地区拥有世界上一些最大的铁矿，由必和必拓、力拓和富瑞斯经营。采矿环境由极端条件定义：夏季地表温度常超45–50°C，紫外线强度是澳洲最高的，铁矿石异常坚硬且边缘锋利(导致电缆加速磨损)，设备在维护基础设施最少的偏远位置运行。 Bucket Wheel Excavator Operations: A bucket wheel excavator (BWE) is a massive rotating machine that mines iron ore by continuous removal of overburden and ore. A typical Pilbara BWE operates 24/7 during mine production, with bucket wheel rotation speeds creating enormous dynamic electrical loads. A single large BWE power demand can reach 5–8 megawatts, requiring 22kV or higher voltage transmission from the main mine substation to the mobile machine. Cable Deployment Requirements: BWE power cables are deployed as trailing cables—the cable unrolls from a reeling drum as the BWE advances through the mine pit, accumulating 500+ meters of cable length during extended operation. When the excavator repositions, the cable must be rapidly re-wound under high tension. This extreme dynamic flexing (20,000–50,000 cycles per year) combined with harsh environmental exposure (temperature, UV, abrasion) creates unprecedented cable engineering challenges.
4 Min Read
Metso Lokotrack mobile crushing and screening plants have been a leading solution in the aggregates production and recycling industries since their introduction in 1985. These track-mounted machines combine complete mobility with high crushing capacity, enabling operations to process materials efficiently at production sites or move between locations with minimal setup time. The Lokotrack series includes jaw crushers (LT Series), cone crushers, and horizontal/vertical shaft impact (HSI/VSI) crushers designed for primary, secondary, and tertiary crushing applications. 美卓Lokotrack移动破碎和筛分设备自1985年推出以来，一直是骨料生产和回收行业的领先解决方案。这些履带式设备将完全的移动性与高破碎产能相结合，能够在生产现场高效处理物料，或以最短的安装时间在不同地点之间转移。
Technical Department
on06/02/2026

Metso Mobile Crushers (Lokotrack): Vibration Resistant Power Cables for Portable Plants

Metso Lokotrack mobile crushing and screening plants have been a leading solution in the aggregates production and recycling industries since their introduction in 1985. These track-mounted machines combine complete mobility with high crushing capacity, enabling operations to process materials efficiently at production sites or move between locations with minimal setup time. The Lokotrack series includes jaw crushers (LT Series), cone crushers, and horizontal/vertical shaft impact (HSI/VSI) crushers designed for primary, secondary, and tertiary crushing applications. 美卓Lokotrack移动破碎和筛分设备自1985年推出以来，一直是骨料生产和回收行业的领先解决方案。这些履带式设备将完全的移动性与高破碎产能相结合，能够在生产现场高效处理物料，或以最短的安装时间在不同地点之间转移。
16 Min Read
Type 14 BS 6708 Trailing Cable
Technical Department
on17/11/2025

What is Type 14 BS 6708 Trailing Cable?

BS 6708 Type 14 Trailing Cable represents a specialized engineering solution within the British Standard family of mining cables, specifically designed for power distribution to excavating and crushing machines in underground coal mines and surface quarrying operations. This cable type features a unique configuration that balances electromagnetic protection with cost efficiency and simplified installation. 🔑 Critical Distinguishing Feature Unlike Type 11 cables where all cores are screened, Type 14 features screened phase cores only, with the pilot core and earth core intentionally left unscreened. This design choice provides specific advantages in fault current handling and cable weight optimization while maintaining essential EMI protection for power conductors. According to BS 6708:1998 classification, Type 14 belongs to the family of non-armoured cables with individually metallic screened cores rated at 640/1100 V, specifically designated for use with coalface cutters and similar mining machinery. The standard encompasses Types 7, 7M, 7S, 11, 14, and 16, each with distinct screening configurations optimized for specific operational requirements.