[email protected]

90°C

14 Min Read
Hybrid Cable Innovation: Dual-Voltage Architecture for Building Lifts The FLEXIDRUM® BASKET LIFT 731 represents a revolutionary engineering approach to hoisting cables for building construction lifts. Unlike traditional single-voltage cables that require separate control and power conductors, the 731 integrates dual-voltage capability (300/500V control + 0.6/1kV power) into a single hybrid structure. This hybrid design is specifically engineered for modern building hoist systems operating in construction environments, where: Control circuits (300/500V) manage speed control, safety interlocks, load monitoring, and emergency descent systems Power circuits (0.6/1kV) drive the main hoist motor (typically 15–50 kW capacity) Single cable run simplifies installation—no separate routing for control vs. power, reducing labor costs ~30% Space efficiency eliminates need for dual-cable management on building facades Safety redundancy through separate insulation layers ensures control circuit failure doesn't disable power monitoring The BASKET LIFT 731's architecture is distinctly different from port crane cables (SPREADER 740/750) and terrestrial industrial cables, reflecting the unique requirements of vertical construction lift systems where personnel safety depends on reliable signal transmission alongside high-power motor control.
Technical Department
on23/06/2026

O que é o TENAX-SAS (N)TSCGEWOEU 3,6/6 kV: uma análise técnica aprofundada do cabo de média tensão de alta flexibilidade, alta resistência à tração e elevada resistência à abrasão para equipamentos móveis pesados de mineração

O TENAX-SAS (N)TSCGEWOEU 3,6/6 kV é um cabo de média tensão concebido para trailing e reeling em condições mecânicas severas, como pás elétricas, shovels, draglines e outros equipamentos móveis de grande porte em mineração. Seu valor técnico não está apenas na classe de tensão, mas no equilíbrio entre flexibilidade extrema em baixas temperaturas, robustez de bainha, resistência à tração contínua, integridade elétrica do sistema semicondutivo e estabilidade estrutural sob abrasão, torção, flexão repetitiva e deslocamentos contínuos sobre terreno agressivo.
7 Min Read
FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU：高柔性盐雾防护港口电缆 专业级高柔性盐雾防护电源电缆，专为恶劣海洋环境设计。采用最小12×D鼓面弯曲半径、超强盐雾腐蚀防护、UV/臭氧/湿度防护，跨越3.6/6kV至12/20kV完整电压平台。专用于挖泥船、海洋泵站和港口设备，15年+服役期验证。 港口电缆技术革新：恶劣海洋环境的专业防腐蚀工程 传统电源电缆部署在盐雾海洋环境中会遭遇加速退化机制：卤化物诱导的铜导体电化学腐蚀、渗透水通过外护套微裂纹、光化学紫外线降解聚合物基质、臭氧氧化聚合物交链脆化。标准FLEXIDRUM®电缆（非专化聚合物护套）在持续港口运行的7-10年内经历~35-50%的机械抗张强度损失，导致提前更换周期和港口设备运行中的意外维护中断。 FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU代表材料化学和护套架构的突破性进展，整合：(1)专化PCP外护套化合物，具有专有防盐雾化学物质（氯化钠渗透防护比标准PCP配方高2倍，符合IEC测试规程），(2)先进多层半导电屏障界面，具有疏水分子结构，防止锡铜导体上的电化学腐蚀途径，(3)集成UV/臭氧吸收添加剂，在15年以上服务周期内减少聚合物链断裂退化约60%，(4)优化柔性架构，支持12×D鼓面部署半径（相比常规专化电缆的15×D及更高），对需要跨地理分布港口设施频繁再部署的移动挖泥设备至关重要。
Technical Department
on16/06/2026

NTSWÖU-J Trailing Cable: тяжёлый кабель 0,6/1 kV для шахт, тоннелей, кранов и trolley systems

NTSWÖU-J — это trailing cable для сухих, влажных и мокрых мест, где присутствуют механические воздействия. По предоставленным данным он применяется в шахтах, trolley systems, кранах и тоннельных применениях как кабель питания. Конструкция включает лужёные медные жилы DIN VDE 0295 Class 5, изоляцию 3GI3, межжильные заземляющие жилы, внутреннюю оболочку GM1b и тяжёлую наружную оболочку 5GM5 жёлтого или чёрного цвета.
11 Min Read
FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)
Technical Department
on11/06/2026

Что такое ÖLFLEX® 191K: инженерный анализ гибкого многожильного AWM-кабеля UL STYLE AWM 21098

ÖLFLEX® 191K — это гибкий многожильный AWM-кабель с UL STYLE AWM 21098 и cRU AWM I/II A/B FT1, предназначенный для plant engineering, industrial machinery, air-conditioning systems и других сред, где применяются общие многожильные AWM-кабели. Его конструкция основана на тонкопроволочных медных жилах класса 5, ПВХ-изоляции и ПВХ-наружной оболочке серого или чёрного цвета. Кабель рассчитан на AC 600 V, испытательное напряжение AC 2000 V и температурный диапазон до +90°C.
4 Min Read
What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.
Technical Department
on11/06/2026

TDS КГРТЭ-ХЛ：0.66/1 kV 变频驱动用屏蔽柔性矿用电缆

TDS КГРТЭ-ХЛ 是一种额定电压 0.66/1 kV、最大工作电压 0.69/1.2 kV、频率最高 400 Hz 的橡胶绝缘、橡胶护套、总屏蔽柔性动力电缆，执行 ТУ 16.К73.168-2017。该电缆用于带频率调节的电驱动系统，为移动和固定对象、机器、机构及其他设备供电，包括矿山钻机等设备
4 Min Read
C PUR Design Integration: FLEXIFESTOON PUR characteristics (inherited): Outer sheath: PUR (polyurethane, compact) Insulation: Special TPE (superior elongation) Central unit: Textile (mechanical support) Weight: 25–30% lighter than standard rubber Diameter: 15–20% smaller than rubber equivalent Cost: +15–25% premium over rubber Service life: 10–15 years (extended) Screened design addition (new): Screen: Tinned copper braid (EMC shielding) Coverage: 80–90% (good EMC performance) Diameter impact: +2–3 mm (screen adds ~3 mm to diameter) Weight impact: +500 kg/km (braid + outer sheath) Cost: Additional +10–15% for screen layer Combined C PUR result: vs. Unscreened PUR (FLEXIFESTOON PUR): FLEXIFESTOON PUR: Minimal diameter/weight, no EMC C PUR: Slightly larger (screen added), excellent EMC Choice: PUR for maximum compactness (non-EMI environments) C PUR for VFD motors, confined spaces with EMC requirements vs. Standard rubber screened (GRDGCGÖU-J): GRDGCGÖU-J: Standard diameter, heavy, rubber durability C PUR: Compact diameter, lightweight, superior oil/chemical resistance Choice: GRDGCGÖU-J for simple temporary festoon C PUR for permanent industrial machine tool installation Nomenclature: FLEXIFESTOON® = Product family (flexible cable) C = Screen (copper braid, "C" from German "Schirm") PUR = Material (polyurethane jacket) Result: "FLEXIFESTOON C PUR" = Screened compact polyurethane cable
Technical Department
on11/06/2026

什么是 HoldMine КРЭ 10 kV：矿井电网提高电气安全性铠装动力电缆

КРЭБбШпнг(А)-HF、КРЭКШпнг(А)-HF、КРЭКбШпнг(А)-HF、КРЭБбШв、КРЭКШв、КРЭКбШв 是额定交流电压 10 kV 的提高电气安全性动力电缆。它们用于矿井电气网络中电能的传输和分配，可沿矿井水平巷道、倾斜巷道以及垂直钻孔敷设，额定频率为 50 Hz
6 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on11/06/2026

什么是 HoldMine КГпЭ 系列：6 kV 挖掘机与矿山移动设备柔性屏蔽动力电缆

HoldMine КГпЭ、КГпЭТ、КГпЭц、КГпЭНШ、КГпЭТБШ、КГпЭ1、КГпЭ2、КГпЭ-ХЛ、КГпЭ1-ХЛ、КГпЭц-ХЛ、КГпЭц-с 是一组额定电压 6 kV 的柔性屏蔽动力电缆，执行 ТУ 16.К73.064-2002，并符合 ГОСТ 31945-2012 要求。该系列用于挖掘机、其他移动机构或电气装置，在露天矿山、地下矿山、挖泥船和其他水上设施中连接到 中性点绝缘的 50 Hz 交流电网；主线芯额定电压为 6 kV，辅助线芯额定电压为 0.38 kV。
5 Min Read
Advanced High-Flexibility Salt-Fog Resistant Port Cable: Engineering Excellence for Extreme Maritime Environments A comprehensive technical deep-dive into Feichun's purpose-engineered high-flexibility port cable platform combining advanced electrochemical conductor protection, specialized EPR insulation, proprietary hydrophobic semi-conductive interfaces, and innovative outer-sheath chemistry—delivering extended service-life durability (12–15+ years field-validated) for demanding dredging, pumping, and floating-crane applications operating in harsh tropical and subtropical saltwater port facilities worldwide.
Technical Department
on11/06/2026

什么是 КПГ, КПГН, КПГСН, КПГУ：0.38/0.66 kV 柔性动力电缆

КГЭТЭШм 是一种用于地下采矿移动机器和机构的 柔性屏蔽动力电缆，适用于带 частотным регулированием 的电气网络，也就是带变频调速控制的矿山供电系统。该型号额定交流电压为 3.3 kV 和 6 kV，执行 ТУ 16.К73.059-2021，火灾危险等级按 ГОСТ 31565-2012 为 О1.8.2.5.4，产品分类代码为 ОКПД2 27.32.13.129。它的结构核心不是普通橡套电缆的单层防护，而是 主线芯屏蔽、分裂接地线、铜丝总屏蔽、耐热橡胶绝缘和高耐磨抗撕裂护套 共同组成的中压变频矿山移动供电系统
5 Min Read
Nominal Voltage 3.6/6 kV Up to 12/20 kV available Max Speed 300 m/min Industry leading + ±25°/m Conductor Type Bare Copper Class 5, IEC 60228 standard Bending Radii 6×D to 20×D 7-level classification system Operating Temp −50 to +80°C Fixed, −35°C flexible Weight Profile 2.5–12.1 kg/km Compact 4-series range
Technical Department
on11/06/2026

什么是 КГЭТУКШм：1.14、3.3 与 6 kV 专利结构柔性屏蔽矿山动力电缆

КГЭТУКШм 是一种用于地下采矿移动机器和机构的 柔性屏蔽矿山动力电缆，额定交流电压覆盖 1.14 kV、3.3 kV 和 6 kV，主线芯用于动力供电，辅助线芯最高至 220 V。资料显示，1.14 kV 版本执行 ТУ 16.К73.063-2002，3.3 kV 和 6 kV 版本执行 ТУ 16.К73.059-2001。其结构受 АО «НИКИ г. Томск» 实用新型专利 №178217《Силовой гибкий экранированный кабель》保护，并符合 Ростехнадзор 在工业安全领域的要求
4 Min Read
Multi-Purpose Industrial Cable FLEXIDRUM® SPECIAL R 702 Highly Flexible, Customizable Cable for Heavy Appliances & Vertical Use ⚡ Voltage: 0.6/1 kV OR 300/500 V 🔧 Speed: 120 m/min max 🎯 Configurations: 40+ SKUs, fully customizable 🌡️ Temperature: −50 to +90°C Nominal Voltage 0.6/1 kV OR 300/500 V (customer selection) Test Voltage 4 kV / 2 kV Depending on voltage class Max Speed 120 m/min Moderate-speed reeling applications Operating Temp −50 to +90°C Fixed & flexible laying (highest in class) Bending Radius 3×d to 7.5×D Depends on application mode & cable size Configurations 40+ Power, control, signal, fiber-optic integration
Technical Department
on11/06/2026

什么是 КГЭТКШм：1.14 / 3.3 kV 矿用移动机械柔性屏蔽铠装动力电缆

КГЭТКШм 是一种用于 шахтные передвижные машины и механизмы 矿用移动机器和机构的柔性屏蔽动力电缆，适用于主线芯额定交流电压 1.14 kV 和 3.3 kV、频率至 50 Hz 的电网，辅助线芯电压至 380 V。该电缆采用乙丙橡胶基耐热绝缘、可剥离导电橡胶主芯屏蔽、分裂接地线、双层导电耐油内护套、铜钢线束铠装，以及耐油不延燃且耐磨抗撕裂的外护套，是面向矿山移动设备高机械应力环境的强化型电缆
5 Min Read
FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU: Advanced High-Flexibility Salt-Fog Resistant Port Cable Professional-grade high-flexibility submersible and overhead power cable engineered for extreme saltwater port environments, combining minimized bending radius (12×D drum deployment), superior salt-fog corrosion resistance, and UV/ozone/moisture immunity across 3.6/6 kV to 12/20 kV voltage platforms. Purpose-designed for dredgers, marine pumps, port cranes, and harbor equipment requiring proven long-service-life durability in corrosive maritime climates. Port Infrastructure Cable Evolution: Specialized Anti-Corrosion Engineering for Harsh Maritime Environments Conventional power distribution cables deployed in salt-fog maritime environments encounter accelerated degradation mechanisms: halide-induced electrochemical corrosion of copper conductor-surface oxidation states, osmotic water ingress through outer-sheath micro-fractures, photochemical UV-degradation of polymer matrix structures, and ozone-oxidation polymer cross-linking embrittlement. Standard FLEXIDRUM® cables (unspecialized polymeric sheathing) experience ~35–50% loss of mechanical tensile strength within 7–10 years of continuous port-operation exposure, necessitating premature replacement cycles and unanticipated maintenance disruptions in mission-critical dredging and port-equipment installations. The FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU represents a materials-chemistry and sheath-architecture breakthrough, integrating: (1) specialized PCP outer-sheath compound incorporating proprietary salt-fog-inhibition chemistry (sodium-chloride penetration resistance rated 2× superior to standard PCP formulations per IEC testing protocols), (2) advanced multi-layer semi-conductive screen interfaces with hydrophobic molecular structure preventing electrochemical corrosion pathways on tinned copper conductors, (3) integrated UV/ozone absorption additives reducing polymer chain-scission degradation by ~60% over 15+ year service intervals, and (4) optimized flexibility architecture enabling 12×D drum deployment radius (vs. 15×D and higher for conventional specialized cables) critical for mobile dredging equipment requiring frequent redeployment across geographically distributed port facilities.
Technical Department
on11/06/2026

什么是 КГЭШ, КГЭТШ：1.14 kV 井下矿用柔性屏蔽动力电缆

КГЭШ 与 КГЭТШ 是俄标体系下的井下矿用柔性屏蔽动力电缆。资料将其定义为：带铜导体、橡胶绝缘、弹性导电屏蔽、橡胶护套的矿用柔性动力电缆，额定交流电压为 1.14 kV，执行 ТУ 16.К73.012。这类电缆面向井下采矿设备、移动或半移动矿山机械、动力馈电与辅助回路组合供电场景，其设计重点不是固定敷设，而是在矿山环境中同时满足 柔性、屏蔽、阻燃、抗拉、抗扭、弯曲疲劳和电气安全