[email protected]

4-core

4 Min Read
AS/NZS 1802 (Australian/New Zealand Standard 1802) establishes the technical requirements for flexible mining cables used in underground and open-pit mining operations across Australia, New Zealand, and the broader Pacific region. Type 241 within this standard designates unarmoured flexible power cables rated at 0.6/1 kV with a Class 5 copper conductor, suitable for mobile mining equipment and drag cable applications. The standard was initially published in 1993 and has been progressively updated (most recently 2019) to incorporate advances in materials science and safety requirements. AS/NZS 1802 Type 241 employs a single-core earth architecture: the cable contains one dedicated protective earth conductor of specified cross-section, positioned at a fixed location within the cable cross-section (typically at the "6 o'clock" position relative to the three phase conductors at 12, 4, and 8 o'clock). This single-core design reflects a pragmatic engineering philosophy: the earth conductor is sized to carry fault currents, provide equipotential grounding for equipment frames, and enable protective relay operation in the event of phase-to-frame faults.
Technical Department
on18/06/2026

什么是 PANZERFLEX-L 0,6/1 kV Instrumentation and Control：矿山高柔性抗扭仪表控制电缆技术解析

PANZERFLEX-L Instrumentation and Control 是面向矿山、散料搬运、移动机床、卷筒与拖令系统的高柔性多芯控制电缆。它通过 Class 5 镀锡铜导体、抗压 HEPR 绝缘、最多三层的 ≤7,5D 短节距成缆、氯丁橡胶内外护套及粘结式合成纱抗扭增强，在高机械应力、频繁弯曲/扭转、快速移动和强加速度条件下传输控制、电源、联锁和仪表回路
13 Min Read
FLEXIFESTOON® PV-FLAT CY (VCVH6-F): Advanced High-Flexibility Flat Cable with Superior Anti-Salt Fog Protection for Port Equipment and Festoon Cargo-Handling Systems Professional-grade parallel-core flat cable engineered for aggressive marine environments. Features flexible red copper Class 5 conductors, PVC TI2 insulation, 10×D bending radius, UV/ozone/chemical resistance, and comprehensive salt-fog protection for automated port infrastructure, ship-to-shore cranes, cargo-handling equipment, and festoon systems operating at deployment velocities up to 120 m/min across high-corrosion maritime zones.
Technical Department
on13/05/2026

FLEXIFESTOON® PV-FLAT CY (VCVH6-F)

FLEXIFESTOON® PV-FLAT CY (VCVH6-F): Advanced High-Flexibility Flat Cable with Superior Anti-Salt Fog Protection for Port Equipment and Festoon Cargo-Handling Systems Professional-grade parallel-core flat cable engineered for aggressive marine environments. Features flexible red copper Class 5 conductors, PVC TI2 insulation, 10×D bending radius, UV/ozone/chemical resistance, and comprehensive salt-fog protection for automated port infrastructure, ship-to-shore cranes, cargo-handling equipment, and festoon systems operating at deployment velocities up to 120 m/min across high-corrosion maritime zones.
6 Min Read
GAALFLEX® VFD FG7(O)CR: 600V/1000V European Standard Industrial Halogen-Free Variable Frequency Drive Cable with HEPR Rubber Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Halogen-Free Industrial VFD Cable European standard 600V/1000V halogen-free VFD cable combining HEPR (halogen-free ethylene propylene rubber) insulation with simplified red copper braid-only shielding, PVC R2 inner sheath, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing halogen-free industrial frequency converter specification (non-building-code), standard temperature industrial environments (−15/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding topography, flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
Technical Department
on11/05/2026

Type FG7(O)CR GAALFLEX® VFD

GAALFLEX® VFD FG7(O)CR: 600V/1000V European Standard Industrial Halogen-Free Variable Frequency Drive Cable with HEPR Rubber Insulation, Red Copper Braid-Only Shielding, PVC R2 Inner Sheath, Gray Special PVC Jacket, Exceptional +250°C Short-Circuit Tolerance, 3-Phase Industrial Motor, 2.5–300 mm² Flexible Class 5, 8×D Bending Radius, Enhanced EN 50266-2-4/IEC 60332-3-24 Flame Testing | European Halogen-Free Industrial VFD Cable European standard 600V/1000V halogen-free VFD cable combining HEPR (halogen-free ethylene propylene rubber) insulation with simplified red copper braid-only shielding, PVC R2 inner sheath, gray special PVC outer jacket, flexible Class 5 red copper, and professional industrial motor integration—addressing halogen-free industrial frequency converter specification (non-building-code), standard temperature industrial environments (−15/0 to +90°C), exceptional short-circuit fault tolerance (+250°C), simplified copper braid shielding topography, flexible motor routing (8×D bend radius), enhanced flame testing capability, and comprehensive European standard industrial automation infrastructure simultaneously.
1 Min Read
GAALFLEX® VFD 9YSLCYK-J: 600V/1000V European Standard Variable Frequency Drive Cable with PP Polypropylene Insulation, Low-Coupling EMC Shielding, Extreme Cold Arctic Performance (−50°C), UV-Resistant, Industrial Motor VFD Integration, 4-Core + 3+3 Earth Configurations, 1.5–240 mm², DIN VDE 0482/EN 50265/IEC 60332/UL VW-1/CSA FT-1 Fire-Rated, AWM Style 2570 1000V 80°C VW-1 Certification, Acid/Caustic/Oil Resistance, Environmental Compliance | International European Standard VFD Cable
Technical Department
on11/05/2026

GAALFLEX® VFD 9YSLCYK-J

GAALFLEX® VFD 9YSLCYK-J: 600V/1000V European Standard Variable Frequency Drive Cable with PP Polypropylene Insulation, Low-Coupling EMC Shielding, Extreme Cold Arctic Performance (−50°C), UV-Resistant, Industrial Motor VFD Integration, 4-Core + 3+3 Earth Configurations, 1.5–240 mm², DIN VDE 0482/EN 50265/IEC 60332/UL VW-1/CSA FT-1 Fire-Rated, AWM Style 2570 1000V 80°C VW-1 Certification, Acid/Caustic/Oil Resistance, Environmental Compliance | International European Standard VFD Cable
8 Min Read
GAALFLEX® TRAY VFD 1400: UL-Certified 1000V Standard Industrial Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, Hazardous-Area Installations, and Cost-Sensitive Industrial Applications (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 Standard PVC [Polyvinyl Chloride] Halogen-Free Outer Sheath with UV Resistance Enabling Industrial Outdoor Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, Optional Tinned Copper Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling Cost-Effective OEM Tray Cable Integration and Process Automation Acceptance for Standard Industrial Environments)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1400

GAALFLEX® TRAY VFD 1400: UL-Certified 1000V Standard Industrial Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, Hazardous-Area Installations, and Cost-Sensitive Industrial Applications (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 Standard PVC [Polyvinyl Chloride] Halogen-Free Outer Sheath with UV Resistance Enabling Industrial Outdoor Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, Optional Tinned Copper Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling Cost-Effective OEM Tray Cable Integration and Process Automation Acceptance for Standard Industrial Environments)
9 Min Read
GAALFLEX® TRAY VFD 1520: UL-Certified 1000V Tinned Copper Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Tinned Copper Conductor Sizing (IEC 60228 Class 5 Tinned Copper per DIN VDE 0295 Providing Enhanced Corrosion Resistance and Oxidation Protection), Frequency Converter Integration, Hazardous-Area Installations, and Aggressive Environmental Exposure (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Tinned Copper per IEC 60228 / DIN VDE 0295 Providing Superior Corrosion Resistance Versus Bare Copper in Salt-Spray, Chemical Vapor, and Moisture-Intensive Environments, GAALTHERM® 530 Special Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 CPE [Chloroprene Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Aggressive Outdoor Industrial Installation in Salt-Spray Coastal, Chemical Processing, and Humid Tropical Environments Without Additional Corrosion Protection, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance in Salt-Spray, Chemical, and Corrosion-Intensive Industrial Environments)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1520

GAALFLEX® TRAY VFD 1520: UL-Certified 1000V Tinned Copper Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Tinned Copper Conductor Sizing (IEC 60228 Class 5 Tinned Copper per DIN VDE 0295 Providing Enhanced Corrosion Resistance and Oxidation Protection), Frequency Converter Integration, Hazardous-Area Installations, and Aggressive Environmental Exposure (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Tinned Copper per IEC 60228 / DIN VDE 0295 Providing Superior Corrosion Resistance Versus Bare Copper in Salt-Spray, Chemical Vapor, and Moisture-Intensive Environments, GAALTHERM® 530 Special Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 CPE [Chloroprene Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Aggressive Outdoor Industrial Installation in Salt-Spray Coastal, Chemical Processing, and Humid Tropical Environments Without Additional Corrosion Protection, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance in Salt-Spray, Chemical, and Corrosion-Intensive Industrial Environments)
8 Min Read
GAALFLEX® TRAY VFD 1510 T: UL-Certified 1000V Metric Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance with Metric Conductor Sizing)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1510 T

GAALFLEX® TRAY VFD 1510 T: UL-Certified 1000V Metric Cable Tray Variable Frequency Drive Inverter Connection Cable for International Cable Tray Industrial Systems Using Metric Conductor Sizing (IEC 60228 Class 5 Flexible Red Copper per DIN VDE 0295), Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–240 mm² Conductor Range Enabling Complete International Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 / DIN VDE 0295, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling International Tray Installation, Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete International VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance with Metric Conductor Sizing)
8 Min Read
GAALFLEX® TRAY VFD 1500 T: UL-Certified 1000V Cable Tray Variable Frequency Drive Inverter Connection Cable for North American Industrial Cable Tray Systems, Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 16–500 MCM Conductor Range Enabling Complete North American Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Finely Stranded Red Copper per ASTM B-3, B-33, B-172, B-174, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling Tray Installation per NEC [National Electrical Code], Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete North American VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance)
Technical Department
on09/05/2026

GAALFLEX® TRAY VFD 1500 T

GAALFLEX® TRAY VFD 1500 T: UL-Certified 1000V Cable Tray Variable Frequency Drive Inverter Connection Cable for North American Industrial Cable Tray Systems, Frequency Converter Integration, and Hazardous-Area Installations (1000 V Nominal Voltage [UL WTTC Rating], UL Type TC-ER c(UL) Type CIC FT4 Fire Classification Certification, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 16–500 MCM Conductor Range Enabling Complete North American Tray VFD Specification from Control Circuits Through Maximum Industrial Motor Systems, Finely Stranded Red Copper per ASTM B-3, B-33, B-172, B-174, Special PVC/Nylon Insulation Providing Electrical Stability and Flame-Retardant Performance, Aluminum Tape + PETP Foil + Tinned Copper Braid + Tinned Copper Drain Wire Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity, High-Strength Ripcord Under Outer Sheath Enabling Field Installation, Black RAL 9005 TPE [Thermoplastic Elastomer] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Industrial Installation, Temperature Range −25 to +90°C [Fixed and Flexible Installation] with 6×D Minimum Bending Radius Supporting Cable Tray Routing, UL Type TC-ER Approval Enabling Tray Installation per NEC [National Electrical Code], Oil Resistance Grade I per UL 1277, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per c(UL) FT4 Vertical Flame Propagation Testing, Optional UL 1277 60°C 600V Upgrade Available, MSHA [Mine Safety and Health Administration] Approval for Hazardous-Area Mining Applications, RoHS Approved, UL/CSA Standards Compliance [ASTM B-3, UL 66, UL 83, UL 1277, CSA C22.2 230/239], and Complete North American VFD Infrastructure Compliance Enabling OEM Tray Cable Integration and Process Automation Acceptance)
9 Min Read
GAALFLEX® VFD 1100 PH: Heavy-Duty Variable Frequency Drive Inverter Connection Cable for Extreme-Temperature Industrial Environments, Harsh-Climate Mining Operations, and Demanding Mechanical-Stress Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete Heavy-Duty VFD Specification, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 630 Special Polyurethane Insulation Providing Superior Mechanical Robustness, Chemical Resistance, and Thermal Stability with −50°C Fixed Laying / −40°C Flexible Installation Minimum, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black PUR [Polyurethane] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Harsh-Environment Installation Without Additional Protection, Temperature Range −50 to +90°C [Fixed Laying] or −40 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Mining Application Suitability, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Halogen-Free Zero-Halogen Construction per DIN VDE 0482 part 267, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Optional Advanced Flame-Retardant Upgrade per DIN VDE 0482 part 265-5-2 / EN 50266-5-2 / IEC 60332-3-24 [Identified with '5' Marker on Part Number 5th Position], RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Heavy-Duty Motor Drive Integration and Process Automation Acceptance in Extreme-Condition Environments)
Technical Department
on09/05/2026

GAALFLEX® VFD 1100 PH

GAALFLEX® VFD 1100 PH: Heavy-Duty Variable Frequency Drive Inverter Connection Cable for Extreme-Temperature Industrial Environments, Harsh-Climate Mining Operations, and Demanding Mechanical-Stress Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete Heavy-Duty VFD Specification, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 630 Special Polyurethane Insulation Providing Superior Mechanical Robustness, Chemical Resistance, and Thermal Stability with −50°C Fixed Laying / −40°C Flexible Installation Minimum, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black PUR [Polyurethane] Halogen-Free Outer Sheath with UV Resistance Enabling Outdoor Harsh-Environment Installation Without Additional Protection, Temperature Range −50 to +90°C [Fixed Laying] or −40 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling Extreme Cold-Climate and High-Temperature Industrial Facilities, Mining Application Suitability, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Halogen-Free Zero-Halogen Construction per DIN VDE 0482 part 267, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Optional Advanced Flame-Retardant Upgrade per DIN VDE 0482 part 265-5-2 / EN 50266-5-2 / IEC 60332-3-24 [Identified with ‘5’ Marker on Part Number 5th Position], RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Heavy-Duty Motor Drive Integration and Process Automation Acceptance in Extreme-Condition Environments)
9 Min Read
GAALFLEX® VFD 2XSLCHK-J: CPR-Compliant Oil-Resistant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building and Industrial Applications with Oil-Exposure Environments, Higher-Temperature Industrial Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Dca-S1b,d2,a1 Fire Classification [Enhanced Performance: Low Smoke, Zero Halogen, Minimal Toxicity, Limited Corrosive Gases], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions Plus New 7-Core Option], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Halogen-Free Insulation with Oil Resistance per IEC 60811-404, Low Corrosive Gas Emission per IEC 60754-2, Low Smoke Density per IEC 61034-1-2, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black Halogen-Free PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +90°C [Fixed Laying] or −15 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling High-Temperature Industrial Facilities, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 part 266-4-2 / EN 50266-4-2 / IEC 60332-3-24, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Oil-Resistant Construction Eliminating Cable Degradation in Petrochemical/Automotive/Food Processing Environments, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration in High-Temperature Oil-Exposure Environments)
Technical Department
on08/05/2026

GAALFLEX® VFD 2XSLCHK-J

GAALFLEX® VFD 2XSLCHK-J: CPR-Compliant Oil-Resistant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building and Industrial Applications with Oil-Exposure Environments, Higher-Temperature Industrial Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Dca-S1b,d2,a1 Fire Classification [Enhanced Performance: Low Smoke, Zero Halogen, Minimal Toxicity, Limited Corrosive Gases], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions Plus New 7-Core Option], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Halogen-Free Insulation with Oil Resistance per IEC 60811-404, Low Corrosive Gas Emission per IEC 60754-2, Low Smoke Density per IEC 61034-1-2, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black Halogen-Free PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +90°C [Fixed Laying] or −15 to +90°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Enabling High-Temperature Industrial Facilities, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / DIN VDE 0482 part 266-4-2 / EN 50266-4-2 / IEC 60332-3-24, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Oil-Resistant Construction Eliminating Cable Degradation in Petrochemical/Automotive/Food Processing Environments, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration in High-Temperature Oil-Exposure Environments)
9 Min Read
GAALFLEX® VFD 2XSLCYK: CPR-Compliant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building Applications, Industrial Frequency Converter Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Cca-s3,d1,a3 Fire Classification [Low Smoke, Zero Halogen, Minimal Toxicity], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Halogen-Free Performance, Low Corrosive Gas Emission, and Superior Thermal Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black RAL 9005 PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +70°C [Fixed Laying] or −15 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / EN 50399, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, Suitable for Buildings, Plants, Fixed Installations, Medium Mechanical Stress, Forced-Movement Flexible Installations in Dry/Moist/Wet Environments, Automotive and Food Industry Applications, SIMOVERT Frequency Converter Integration, Industrial Pump/Ventilator/Conveyor/Air-Conditioning Systems, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration)
Technical Department
on08/05/2026

GAALFLEX® VFD 2XSLCYK

GAALFLEX® VFD 2XSLCYK: CPR-Compliant Halogen-Free Variable Frequency Drive Inverter Connection Cable for European Building Applications, Industrial Frequency Converter Systems, and Mining Operations (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, CPR EU 305/2011 + EN 50575:2014+A1:2016 Compliance with Cca-s3,d1,a3 Fire Classification [Low Smoke, Zero Halogen, Minimal Toxicity], Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification Across Industrial Applications, Flexible Class 5 Red Copper per IEC 60228, Special XLPE [Cross-Linked Polyethylene] Insulation Providing Halogen-Free Performance, Low Corrosive Gas Emission, and Superior Thermal Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control, Black RAL 9005 PVC Outer Sheath with UV Resistance for Outdoor Industrial Deployment, Temperature Range −40 to +70°C [Fixed Laying] or −15 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Mining Application Suitability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1 / EN 50265-2-1 / IEC 60332-1-2 / EN 50399, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Halogen-Free Zero-Halogen Construction Eliminating Toxic Chlorine/Fluorine Emissions During Fire, Suitable for Buildings, Plants, Fixed Installations, Medium Mechanical Stress, Forced-Movement Flexible Installations in Dry/Moist/Wet Environments, Automotive and Food Industry Applications, SIMOVERT Frequency Converter Integration, Industrial Pump/Ventilator/Conveyor/Air-Conditioning Systems, RoHS and CE Approved, and Complete European and International Compliance Enabling Building Code Acceptance and Professional VFD System Integration)
9 Min Read
GAALFLEX® VFD 1300 A: BS 5467-Compliant Armoured Variable Frequency Drive Inverter Connection Cable for Harsh Industrial Environments, Outdoor Deployment, and Applications Requiring Mechanical Protection (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification in Mechanical Hazard Zones, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 580 Special Polyurethane Insulation Providing Superior Thermal Stability and Mechanical Robustness Compared to PE Standard Insulation, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression for Frequency Converter Signal Integrity, Steel Wire Armour Providing Comprehensive Mechanical Protection Against Puncture, Crushing, and Environmental Hazards Enabling Direct Burial and Outdoor Installation, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Inner Black RAL 9005 PVC Sheath Protecting Armour from Conductor Contact, Outer Black UV-Resistant PVC Compound Sheath Enabling Outdoor Industrial Installation Without Additional Protection, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, 12×D Minimum Bending Radius Supporting Field Routing in Armoured Configurations, BS 5467 Compliance Enabling UK and Commonwealth Market Acceptance, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Integration and Process Automation Acceptance in Mechanically Hazardous Environments)
Technical Department
on08/05/2026

BS 5467 GAALFLEX® VFD 1300 A

GAALFLEX® VFD 1300 A: BS 5467-Compliant Armoured Variable Frequency Drive Inverter Connection Cable for Harsh Industrial Environments, Outdoor Deployment, and Applications Requiring Mechanical Protection (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification in Mechanical Hazard Zones, Flexible Class 5 Red Copper per IEC 60228, GAALTHERM® 580 Special Polyurethane Insulation Providing Superior Thermal Stability and Mechanical Robustness Compared to PE Standard Insulation, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression for Frequency Converter Signal Integrity, Steel Wire Armour Providing Comprehensive Mechanical Protection Against Puncture, Crushing, and Environmental Hazards Enabling Direct Burial and Outdoor Installation, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Inner Black RAL 9005 PVC Sheath Protecting Armour from Conductor Contact, Outer Black UV-Resistant PVC Compound Sheath Enabling Outdoor Industrial Installation Without Additional Protection, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, 12×D Minimum Bending Radius Supporting Field Routing in Armoured Configurations, BS 5467 Compliance Enabling UK and Commonwealth Market Acceptance, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, RoHS and CE Approved, and Complete International VFD Infrastructure Compliance Enabling OEM Integration and Process Automation Acceptance in Mechanically Hazardous Environments)
9 Min Read
GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
Technical Department
on08/05/2026

GAALFLEX® VFD 1000 (2YSLCYK-J UL)

GAALFLEX® VFD 1000 (2YSLCYK-J UL): UL-Certified Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Frequency Converter Integration, and Utility Distribution Applications (1000 V Nominal Voltage [UL Rating], AWM Style 2570 1000 V 80°C VW-1 Certification and AWM II A/B 1000 V 80° FT-1 Rating, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete North American VFD Specification from Fractional-Horsepower Servo Drives Through Maximum Industrial 3-Phase Motor Systems, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] Standard, +80°C Rated Temperature per UL Specification for Both Fixed and Flexible Installation Enabling Higher-Ambient Industrial Facilities, +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, UV-Resistant Outdoor Use per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, RoHS and CE Approved, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance with UL Market Validation)
9 Min Read
GAALFLEX® VFD 2YSLCYK-J: CPR-Compliant (EU 305/2011 + EN 50575:2014+A1:2016, Eca Classification) Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Mining Applications, and Outdoor Frequency Converter Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification from Servo Drives Through Industrial Motors, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor Mining and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Hazardous-Area Installation per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, CPR Fire Classification Eca [EN 13501-1] Enabling European Regulatory Compliance, Optional XLPE Halogen-Free Version [2XSLCHK-J] per IEC 60502-4 with Eca-Rated Black SHF1 Sheath, Suitable for Mining Machinery, Outdoor Industrial Systems, Automotive and Food Automation with Environmental Exposure, and Complete International VFD Infrastructure Compliance with Regulatory Mandates)
Technical Department
on08/05/2026

Type 2YSLCYK-J GAALFLEX® VFD

GAALFLEX® VFD 2YSLCYK-J: CPR-Compliant (EU 305/2011 + EN 50575:2014+A1:2016, Eca Classification) Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply, Mining Applications, and Outdoor Frequency Converter Systems (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD Specification from Servo Drives Through Industrial Motors, Flexible Class 5 Red Copper per IEC 60228, PE Special Insulation Compound Providing Electrical Stability, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding, Low Mutual Capacitance [70–410 nF/km], Low Coupling Resistance [Max 250 Ω/km], Black RAL 9005 PVC Outer Sheath with UV Resistance Enabling Outdoor Mining and Industrial Installation Without Degradation, Temperature Range −40 to +70°C [Fixed] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability, Hazardous-Area Installation per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, CPR Fire Classification Eca [EN 13501-1] Enabling European Regulatory Compliance, Optional XLPE Halogen-Free Version [2XSLCHK-J] per IEC 60502-4 with Eca-Rated Black SHF1 Sheath, Suitable for Mining Machinery, Outdoor Industrial Systems, Automotive and Food Automation with Environmental Exposure, and Complete International VFD Infrastructure Compliance with Regulatory Mandates)
9 Min Read
GAALFLEX® VFD 2YSLCY-J: Shielded Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply and Frequency Converter Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD System Specification from Small Servo Drives Through High-Power Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 Enabling Field Installation and Drive Enclosure Routing, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Transparent or Transparent-Orange PVC Outer Sheath Enabling Visual Conductor Inspection and Installation Verification, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, Hazardous-Area Installation Capability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3 Enabling Integration with Modern Frequency Converter Installations, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, Optional XLPE Halogen-Free Version [2XSLCH-J] for Environmental Applications, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance)
Technical Department
on08/05/2026

Type 2YSLCY-J GAALFLEX® VFD

GAALFLEX® VFD 2YSLCY-J: Shielded Variable Frequency Drive Inverter Connection Cable for North American Industrial Motor Power Supply and Frequency Converter Applications (0.6/1 kV Nominal Voltage, 4 kV Test Voltage, Comprehensive Dual-Configuration Portfolio [4-Core and 3+3 Earth Conductor Versions], 1.5–300 mm² Conductor Range Enabling Complete VFD System Specification from Small Servo Drives Through High-Power Industrial Motor Systems, Flexible Class 5 Red Copper per IEC 60228 Enabling Field Installation and Drive Enclosure Routing, PE Special Insulation Compound Providing Electrical Stability Across Frequency Conversion Environments, Aluminum Tape + PETP Foil + Tinned Copper Braid Triple-Layer Shielding Providing Effective EMI Suppression and Signal Integrity Critical for Frequency Converter Control, Low Mutual Capacitance [70–410 nF/km Depending on Configuration] Minimizing Cross-Talk Between Adjacent Conductors in Bundled VFD Installations, Low Coupling Resistance [Max 250 Ω/km] Supporting Low-Impedance Control Circuits, Transparent or Transparent-Orange PVC Outer Sheath Enabling Visual Conductor Inspection and Installation Verification, Temperature Range −40 to +70°C [Fixed Laying] or −5 to +70°C [Flexible Application] with +90°C Conductor and +250°C Short-Circuit Capability Supporting Transient Overvoltage Conditions During Frequency Conversion Switching, Hazardous-Area Installation Capability per DIN VDE 0250, Electromagnetic Compatibility per EN 55011 / DIN VDE 0875 / EN 61800-3 Enabling Integration with Modern Frequency Converter Installations, Self-Extinguishing and Flame-Retardant per DIN VDE 0482-265-2-1, Insulation Resistance 200+ MΩ·km, Radiation Resistance to 80×10⁶ cJ/kg, Flexible Bending Radius Supporting Tight Drive Enclosure Routing, Optional XLPE Halogen-Free Version [2XSLCH-J] for Environmental Applications, and Complete North American VFD Infrastructure Compliance Enabling OEM Motor Drive Integration and Process Automation Acceptance)