[email protected]

聚乙烯绝缘

4 Min Read
FLEXIFESTOON® NE-FLAT NGFLGÖU-J: Advanced Salt-Fog Resistant High-Flexibility Port Cable for Harbor Engineering and Coastal Equipment Systems Comprehensive technical resource detailing Feichun's proprietary salt-fog resistant port cable technology engineered for maritime harbor environments, coastal loading equipment, and container terminal automation systems. Advanced EPR rubber insulation chemistry combined with enhanced corrosion protection architecture delivers superior electrical performance under aggressive saltwater exposure conditions, maintaining mechanical flexibility (10× bending radius compliance) across extended operating temperature ranges (-40°C to +80°C) while eliminating performance degradation characteristic of standard industrial cables in marine environments.
Technical Department
on11/06/2026

Что такое ÖLFLEX® CONTROL TM: инженерный анализ сертифицированного ПВХ-кабеля управления 0.6/1kV UL TC-ER WTTC AWM 1000V

ÖLFLEX® CONTROL TM — это сертифицированный ПВХ-кабель управления для широкого спектра промышленных применений: industrial machinery, plant engineering, cable tray installation, WTTC-применения в ветроустановках, wet-rated outdoor use, oil-resistant environments и direct burial applications в рамках указанных UL/CSA/IEC назначений. Его техническая ценность не только в напряжении 0.6/1kV, а в комбинации сертификаций: UL TC, TC-ER, MTW, WTTC, THHN/THWN для соответствующих сечений, UL AWM, CSA AWM, FT4, OIL RES I+II, sunlight resistance и 75°C WET rating.
4 Min Read
UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.
Technical Department
on11/06/2026

ТППшвАпд-нг(А)-HF：矿山通信、数据与供电组合低烟无卤电缆

ТППшвАпд-нг(А)-HF 是用于 горнорудная промышленность，即矿山工业的 组合型通用通信电缆，执行 ТУ 27.32.13-216-00217082-2023。它把 本地电话通信对、数据传输对和供电线芯 集成在同一电缆结构中，可用于本地电话网络、爆炸危险环境中的本地通信、自动化系统、煤矿和矿井 аэрогазовая защита 气体空气保护系统，以及含化学活性物质的场所
4 Min Read
FLEXIDRUM® R 703: Advanced High-Temperature Industrial Multi-Core Cable for Extreme-Heat Heavy Equipment and Vertical Lifting Systems Engineered for the most demanding industrial thermal environments, the FLEXIDRUM® R 703 delivers breakthrough high-temperature performance with continuous operation capability to +120°C. Combining Class 5 flexible red copper conductor, advanced GAALTHERM® 585 thermoplastic elastomer insulation with extreme thermal resilience, aramide yarn anti-twisting reinforcement, and specialized PUR outer sheath formulation—meeting all fire-safety and halogen-free standards while maintaining electrical performance across the widest thermal envelope (−40 to +120°C) available in industrial cable engineering.
Technical Department
on11/06/2026

什么是 КГЭЖШ, КГЭЖТШ：1.14 kV 地下采矿用柔性屏蔽动力电缆

КГЭЖШ 和 КГЭЖТШ 是额定电压 1.14 kV 的柔性屏蔽动力电缆，俄文资料定义为“Кабели силовые гибкие экранированные на напряжение 1,14 кВ”。它们用于地下采矿中在急倾斜煤层工作的移动机器和机构，主线芯接入额定交流电压至 1140 V、频率至 50 Hz 的电网，辅助线芯为 220 V。两者的核心区别在于绝缘耐热等级：КГЭЖШ 使用橡胶绝缘，КГЭЖТШ 使用耐热橡胶绝缘，因此 КГЭЖТШ 具有更高的长期允许导体温度和更高电流负载