Large three-phase AC motors drove continuous-duty equipment (conveyor systems, pump stations, ventilation fans) with straightforward on/off control via contactor switches. The control circuits were simple, the equipment was robust and forgiving of electrical noise, and cable specifications focused purely on mechanical durability and basic electrical protection. Modern underground mining operations operate in a fundamentally different electrical environment. Variable frequency drives (VFDs) regulate motor speeds to match load requirements, reducing energy consumption and extending equipment life. Programmable logic controllers (PLCs) and distributed control systems (DCS) automate equipment sequencing and mine ventilation. Wireless monitoring systems track equipment health, environmental conditions, and safety parameters. The mine's electrical environment has become as electrically complex as an industrial manufacturing facility, except that everything must operate underground in the presence of conductive dust, moisture, and metallic ore particles that create unintended current paths and electromagnetic noise sources.

on22/06/2026

符合俄罗斯 GOST R 消防认证的电缆 —— 飞纯电缆

在俄罗斯及关税同盟相关工程项目中，电缆采购不只是电压、截面、载流量和价格的比较，更是消防安全合规、项目文件完整性和市场准入能力的综合判断。飞纯电缆通过俄罗斯 FSC 消防安全合格认证，并能够围绕 GOST R 与防火安全认证体系的协同要求，为矿山、港口、工业设备、移动机械和能源项目提供更可靠的电缆合规解决方案。

BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in hoisting control cable design, specifically engineered for next-generation automated port crane systems operating under extreme environmental and operational constraints. Unlike the BASKET SPREADER 740's 300/500V AC specification, the 750 operates at 0.6/1kV AC with dual-voltage DC capability (0.9/1.8 kV)—a classification shift that enables: Higher power capacity – 2–3× greater amperage per conductor, enabling longer cable runs with lower voltage drop Medium-voltage infrastructure compatibility – Direct integration with port substation power distribution systems (0.6 kV = 600V three-phase industrial standard) DC dual-voltage operation – Simultaneous support for AC motor control and DC feedback/signaling circuits (0.9/1.8 kV DC margins) Extreme temperature capability – Operating range −50°C to +80°C (vs. SPREADER 740's −20°C to +60°C), addressing Arctic port terminals and tropical high-ambient scenarios Advanced insulation chemistry – GAALTHERM® 530 thermoplastic compound replaces standard PVC/PUR, delivering superior chemical resistance and thermal stability This cable bridges the gap between standard control cables (300/500V, limited temperature) and heavy industrial medium-voltage distribution cables, creating a purpose-built solution for modern automated gantry crane systems in global port terminals.

Technical Department

on22/06/2026

经过 FSC 认证电缆的采购指南：为什么推荐飞纯电缆

对于俄罗斯及关税同盟相关工程项目，电缆采购不应只比较价格、截面和交期。经过 FSC 消防安全合格认证的电缆，能够在消防合规、项目准入、进口文件、现场验收和安全责任管理中发挥关键作用。飞纯电缆通过俄罗斯 FSC 消防安全合格认证，即 Сертификат пожарной безопасности，适合作为矿山、港口、工业设备、移动机械和能源项目的重点推荐供应商。

DM1N and 2M2N designations represent the apex of mining cable complexity — flexible armoured cables engineered for medium-voltage (1.8/3 kV, 3.6/6 kV) mobile equipment operating in the most mechanically extreme underground environments. These cables are specified for longwall coal shearers, hydraulic drill jumbos, and other continuous-operation mobile equipment that simultaneously demand ultra-high mechanical durability and medium-voltage electrical capability. The fundamental engineering challenge that defines DM1N/2M2N is this: medium-voltage cables require internal semi-conductive layers and sophisticated insulation architecture to prevent corona discharge (electrical breakdown at high voltage), but they must simultaneously maintain the extreme mechanical flexibility required for cable reel winding and equipment drag duty. This convergence is far more difficult than it might appear, because the semi-conductive layers and additional insulation walls that prevent corona also inherently reduce mechanical flexibility and increase cable stiffness.

Technical Department

on22/06/2026

什么是 FCS 俄罗斯防火消防认证，以及飞纯拥有这项认证有什么优势和背书

FCS 俄罗斯防火消防认证，工程语境中也常被写作 FSC Fire Safety Certificate，是俄罗斯市场和相关项目审查中用于证明产品符合消防安全法规、火灾风险控制和特定测试要求的重要合格证明。对于港口岸桥、卸船机、堆取料机、斗轮机、矿山移动设备、卷筒系统和拖令系统用电缆而言，它的价值不只是“多一张证书”，而是把电缆在火焰传播、烟雾释放、燃烧毒性、耐火或火灾下功能保持等维度转化为可被项目方、EPC、船厂、港机厂、矿山业主和俄罗斯客户审查的技术证据。

What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.

Technical Department

on11/06/2026

什么是 КГЭ, КГЭ-ХЛ, КГЭ-Т, КГЭТ, КГЭН：6 kV 矿山移动设备柔性屏蔽动力电缆

КГЭ、КГЭ-ХЛ、КГЭ-Т、КГЭТ、КГЭН 是额定电压 6 kV 的柔性屏蔽动力电缆，俄文资料定义为“Кабели силовые гибкие экранированные на напряжение 6 кВ”。它们用于露天和地下矿山作业中连接挖掘机、其他移动机构或电气装置到绝缘中性点交流网络，主线芯额定电压 6 kV，辅助线芯 380 V，频率至 50 Hz。该系列通过型号区分普通、耐寒、耐热、热带和地下不延燃等应用方向