飞纯 Type 275 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用柔性馈电电缆，电压等级为 1.1/1.1KV。根据产品资料，该电缆主要作为梭车和泵的柔性馈电电缆使用。 Type 275 的关键工程特点是接地芯线设计用于降低电缆在张力卷绕过程中发生断丝的风险。梭车电缆和泵用馈电电缆经常处于卷绕、拖曳、拉伸、反复弯曲和移动工况中，接地芯线如果在张力卷绕过程中发生断丝，将影响接地连续性和供电安全。Type 275 因此更强调接地芯线结构可靠性，而不是单纯的导体截面或外径参数。

on22/06/2026

飞纯 Type 275 1.1/1.1KV：基于 AS/NZS 1802:2003 的澳洲矿用梭车与泵用柔性馈电电缆技术解析

飞纯 Type 275 是基于 AS/NZS 1802:2003 卷筒与拖曳电缆标准体系设计的矿用柔性馈电电缆，电压等级为 1.1/1.1KV。根据产品资料，该电缆主要作为梭车和泵的柔性馈电电缆使用。 Type 275 的关键工程特点是接地芯线设计用于降低电缆在张力卷绕过程中发生断丝的风险。梭车电缆和泵用馈电电缆经常处于卷绕、拖曳、拉伸、反复弯曲和移动工况中，接地芯线如果在张力卷绕过程中发生断丝，将影响接地连续性和供电安全。Type 275 因此更强调接地芯线结构可靠性，而不是单纯的导体截面或外径参数。

Type W and Type G-GC cables represent two of the most critical portable power cable designs for mining and heavy industrial applications. Both cable types are engineered to withstand extreme mechanical stress, chemical exposure, and demanding electrical requirements while maintaining safety compliance with the Mine Safety and Health Administration (MSHA) regulations under 30 CFR Part 75 and Part 77. Type W和Type G-GC电缆是矿业和重工业应用中最关键的两种便携式电力电缆设计。这两种电缆均经过工程设计，能够承受极端的机械应力、化学暴露和苛刻的电气要求，同时保持符合美国矿山安全与健康管理局(MSHA)根据30 CFR第75和77部分制定的安全合规要求。

Technical Department

on05/02/2026

Type W vs. Type G-GC: The Definitive Guide to Ground Check Conductors for MSHA Compliance

Type W and Type G-GC cables represent two of the most critical portable power cable designs for mining and heavy industrial applications. Both cable types are engineered to withstand extreme mechanical stress, chemical exposure, and demanding electrical requirements while maintaining safety compliance with the Mine Safety and Health Administration (MSHA) regulations under 30 CFR Part 75 and Part 77. Type W和Type G-GC电缆是矿业和重工业应用中最关键的两种便携式电力电缆设计。这两种电缆均经过工程设计，能够承受极端的机械应力、化学暴露和苛刻的电气要求，同时保持符合美国矿山安全与健康管理局(MSHA)根据30 CFR第75和77部分制定的安全合规要求。

AS/NZS 1802 standard specifies requirements for electric cables used in underground coal mines in Australia and New Zealand. Type 441 cables, as defined within this standard, are trailing cables designed for reeling and trailing applications in mining equipment such as continuous miners, shuttle cars, and roof bolters. Anhui Feichun Special Cable Co., Ltd. manufactures Type 441 cables that provide equivalent performance to established brands like Olex Versolex, fully compliant with AS/NZS 1802 certification requirements.

Technical Department

on03/02/2026

Olex Versolex Equivalent: AS/NZS 1802 Certified Type 441 Cables for Australian Coal Mining

AS/NZS 1802 standard specifies requirements for electric cables used in underground coal mines in Australia and New Zealand. Type 441 cables, as defined within this standard, are trailing cables designed for reeling and trailing applications in mining equipment such as continuous miners, shuttle cars, and roof bolters. Anhui Feichun Special Cable Co., Ltd. manufactures Type 441 cables that provide equivalent performance to established brands like Olex Versolex, fully compliant with AS/NZS 1802 certification requirements.

cable selection directly impacts equipment reliability, operational safety, and cost efficiency. While Diesel Locomotive Cable (DLO) and Type W cables share similar voltage ratings and environmental resistance, their fundamental design philosophies serve distinctly different operational requirements. This technical analysis examines why DLO cable, despite its robust construction and premium materials, is frequently rejected for dynamic mining applications involving continuous movement equipment such as shuttle cars, draglines, and continuous miners.

Technical Department

on26/01/2026

DLO Cable vs. Type W: Why is Diesel Locomotive Cable often rejected for dynamic mining applications?

cable selection directly impacts equipment reliability, operational safety, and cost efficiency. While Diesel Locomotive Cable (DLO) and Type W cables share similar voltage ratings and environmental resistance, their fundamental design philosophies serve distinctly different operational requirements. This technical analysis examines why DLO cable, despite its robust construction and premium materials, is frequently rejected for dynamic mining applications involving continuous movement equipment such as shuttle cars, draglines, and continuous miners.