飞纯 Type 2S 是依据 AS/NZS 1972:2006 设计的 EPR 绝缘、CPE 护套铜屏蔽电缆，提供 1.1/1.1KV 和 3.3/3.3KV 电压等级。产品主要用于机器内部布线，或机器与机器、机器与设备之间的电气连接，适合项目要求采用橡胶型或弹性体绝缘护套电缆的场景。 Type 2S 还可用于长壁采煤照明回路，并可根据设备设计配置 Pilot 芯、控制芯、双绞线或单独屏蔽的辅助线芯。

on22/06/2026

飞纯 Type 2S：1.1/1.1KV与3.3/3.3KV铜屏蔽橡胶型机器及设备连接电缆

飞纯 Type 2S 是依据 AS/NZS 1972:2006 设计的 EPR 绝缘、CPE 护套铜屏蔽电缆，提供 1.1/1.1KV 和 3.3/3.3KV 电压等级。产品主要用于机器内部布线，或机器与机器、机器与设备之间的电气连接，适合项目要求采用橡胶型或弹性体绝缘护套电缆的场景。 Type 2S 还可用于长壁采煤照明回路，并可根据设备设计配置 Pilot 芯、控制芯、双绞线或单独屏蔽的辅助线芯。

飞纯 Type 1 是依据 AS/NZS 1972:2006 设计的 PVC 绝缘铜屏蔽设备连接电缆，额定电压为 1.1/1.1KV。产品主要用于机器内部布线，或机器与机器、机器与设备之间的电气连接，适用于可以使用 PVC 绝缘和 PVC 护套的环境。 Type 1 提供两种屏蔽结构：一种是每根线芯分别设置铜编织复合屏蔽的逐芯独立屏蔽型；另一种是全部绝缘线芯成缆后统一设置一层屏蔽的整缆总屏蔽型。

Technical Department

on22/06/2026

飞纯 Type 1 1.1/1.1KV：逐芯独立铜屏蔽与整缆总铜屏蔽设备连接电缆

飞纯 Type 1 是依据 AS/NZS 1972:2006 设计的 PVC 绝缘铜屏蔽设备连接电缆，额定电压为 1.1/1.1KV。产品主要用于机器内部布线，或机器与机器、机器与设备之间的电气连接，适用于可以使用 PVC 绝缘和 PVC 护套的环境。 Type 1 提供两种屏蔽结构：一种是每根线芯分别设置铜编织复合屏蔽的逐芯独立屏蔽型；另一种是全部绝缘线芯成缆后统一设置一层屏蔽的整缆总屏蔽型。

PUR vs. Rubber Sheath Comparison: EPR/PCP rubber (traditional festoon): Base polymer: Ethylene-propylene or chloroprene rubber Density: ~1.2 g/cm³ (light) Young's modulus: ~2–8 MPa (soft, flexible) Tear strength: 15–30 kN/m (adequate) Tensile strength: 8–12 MPa (moderate) Oil resistance: Fair (EPR), Good (CPE) Cost: Low (commodity material) Typical life: 5–10 years PUR (polyurethane, FLEXIFESTOON PUR): Base polymer: Polyol + isocyanate urethane linkage Density: ~1.25 g/cm³ (slightly heavier per unit volume, but better properties) Young's modulus: ~10–15 MPa (stiffer, stronger) Tear strength: 30–50 kN/m (2–3× better than rubber) Tensile strength: 12–18 MPa (much stronger) Oil resistance: Excellent (far superior to rubber) Cost: Medium (specialty material) Typical life: 10–15 years (50–100% longer) PUR performance advantages: (1) Tear resistance: Mechanism: Urethane linkages form strong hydrogen bonds More rigid polymer network, resists crack propagation Consequence: Cable survives snagging on sharp edges Abrasion resistance 2–3× better than rubber Application: Machine tool environments (sharp metal edges, high speed) (2) Oil immersion durability: Rubber swelling in oil: 8–15% volume increase PUR swelling in oil: 2–5% volume increase (excellent stability) Result: Cable diameter remains stable, connections don't loosen No electrical performance degradation from oil ingress (3) Ozone & UV resistance: Rubber degradation rate: 10–20% strength loss per 5 years outdoor PUR degradation rate: 5–10% strength loss per 5 years outdoor Application: Outdoor machine tools, conveying systems in sunlight (4) Mechanical stress recovery: Rubber behavior: After bending, slow recovery (viscoelastic) PUR behavior: Rapid recovery, lower hysteresis loss Benefit: Lower heating during high-speed cycling 240 m/min reeling applications tolerate higher duty cycles Cost-benefit trade-off: PUR premium cost: +15–25% vs. standard rubber festoon cable Justification for premium: - 2× longer service life (10–15 years vs. 5–10 years) - Reduced maintenance/replacement downtime in industrial operations - Superior performance in aggressive environments (oil, chemicals) - Better value when cost-of-downtime is high (machine tools, production lines)

Technical Department

on12/06/2026

Что такое ÖLFLEX INSTRUM RE-2X(ST)YRY PiMF: бронированный инструментальный кабель с XLPE-изоляцией и PiMF-экранированием

ÖLFLEX INSTRUM RE-2X(ST)YRY PiMF — это бронированный инструментальный кабель с XLPE-изоляцией, индивидуальным экраном каждой пары, общим экраном, PVC внутренней оболочкой, оцинкованной стальной проволочной бронёй и PVC наружной оболочкой black или blue. Он предназначен для передачи communication, data and voice transmission signals in industrial process manufacturing plants, особенно в Oil and Gas industry, petrochemical industry и промышленных системах КИПиА, где требуется одновременно сигнальная стабильность, EMC-защита и повышенная механическая стойкость кабельной трассы.

H07RN-F: Advanced High-Flexibility Salt-Fog Resistant Port Cable Engineering Solution Specialized rubber-sheathed electrical cable engineered for extreme maritime and coastal port environments. H07RN-F combines superior mechanical flexibility (4×D minimum fixed-laying bending radius, 6×D flexible-application capability) with comprehensive salt-fog environmental resistance, enabling reliable 450/750V power distribution and control signaling in container gantry systems, ship loaders, and port automation infrastructure where conventional cables fail within 6–12 months of deployment.

Technical Department

on12/06/2026

ÖLFLEX INSTRUM RE-2X(ST)Y PiMF — контрольный кабель для промышленных сигналов и данных

Экранированный контрольный кабель с XLPE изоляцией и PVC оболочкой для передачи данных, голосовых и сигнальных сигналов в промышленной автоматизации, нефтегазовой и химической промышленности. Подходит для влажных и сырых помещений, поддерживает работу в Intrinsically Safe (IS) системах группы 2 с напряжением

What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.

Technical Department

on11/06/2026

TDS КГРТЭ-ХЛ：0.66/1 kV 变频驱动用屏蔽柔性矿用电缆

TDS КГРТЭ-ХЛ 是一种额定电压 0.66/1 kV、最大工作电压 0.69/1.2 kV、频率最高 400 Hz 的橡胶绝缘、橡胶护套、总屏蔽柔性动力电缆，执行 ТУ 16.К73.168-2017。该电缆用于带频率调节的电驱动系统，为移动和固定对象、机器、机构及其他设备供电，包括矿山钻机等设备