[email protected]

tinned copper wire braid screen

1 Min Read
GAALFLEX® CONTROL 500 CP Lean: Advanced EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Harsh Industrial Environments (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PETP Foil Wrapping Plus Overall Tinned Copper Wire Braid Screen Providing ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Grey PUR Special Compound Outer Sheath (RAL 7001) Delivering Superior Oil Resistance
Technical Department
on07/05/2026

GAALFLEX® CONTROL 500 CP Lean

GAALFLEX® CONTROL 500 CP Lean: Advanced EMI-Suppressed Oil-Resistant Multi-Core Control Cable for Harsh Industrial Environments (300/500 V Nominal, 3 kV Test Voltage per DIN VDE 0281, −40 to +80°C Fixed Installation / −5 to +70°C Flexible Application, Class 5 Flexible Red Bare Copper per IEC 60228 and DIN VDE 0295, PETP Foil Wrapping Plus Overall Tinned Copper Wire Braid Screen Providing ≥85 dB EMI Attenuation Across Industrial Frequency Spectrum, Grey PUR Special Compound Outer Sheath (RAL 7001) Delivering Superior Oil Resistance
16 Min Read
Feichun AS/NZS 1972 Type 2S 3.3kV cables can serve as direct drop-in replacements for Olex Nexans Versolex Type 2S mining cables, provided that the specifications are matched cross-section for cross-section and that the installation environment confirms compliance with AS/NZS 1972 requirements. However, this replacement is not automatic or universal. It requires careful verification of your existing Olex cable specifications, comparison against Feichun's equivalent product line, validation of termination compatibility, and confirmation that your mining site's electrical protection systems (earth leakage relays, neutral earthing resistors, and protection settings) are appropriately configured for the replacement cable's impedance characteristics.
Technical Department
on06/03/2026

Drop-in SWA Replacement for Olex Versolex Type 2S 3.3kV Underground Power Cable

Feichun AS/NZS 1972 Type 2S 3.3kV cables can serve as direct drop-in replacements for Olex Nexans Versolex Type 2S mining cables, provided that the specifications are matched cross-section for cross-section and that the installation environment confirms compliance with AS/NZS 1972 requirements. However, this replacement is not automatic or universal. It requires careful verification of your existing Olex cable specifications, comparison against Feichun’s equivalent product line, validation of termination compatibility, and confirmation that your mining site’s electrical protection systems (earth leakage relays, neutral earthing resistors, and protection settings) are appropriately configured for the replacement cable’s impedance characteristics.