[email protected]

subsurface mining cable

13 Min Read
Longwall mining represents the most productive underground coal extraction method available to modern mining operations, with a single longwall face capable of producing over 5,000 tonnes of coal per hour in optimized installations. At the heart of this productivity lies the longwall shearer, a massive mobile machine that travels back and forth along the coal face, cutting coal with rotating drums while advancing through seam heights ranging from 1.6 to 7 meters. The power cables supplying electricity to these shearers operate in one of the most mechanically demanding cable applications in industrial engineering, subjected to continuous motion within cable chain systems (often referred to as "Bretby chains"), constant vibration from cutting operations, tight bending radii as the shearer traverses the face, and the harsh environmental conditions characteristic of underground coal mining.[1] （长壁开采代表了现代采矿作业可用的最具生产力的地下煤炭开采方法，单个长壁工作面在优化安装中每小时可生产超过5000吨煤炭）
Technical Department
on28/01/2026

Longwall Shearer: What are the advantages of using Type 241 over Type 275 for high-vibration longwall shearer power supplies?

Longwall mining represents the most productive underground coal extraction method available to modern mining operations, with a single longwall face capable of producing over 5,000 tonnes of coal per hour in optimized installations. At the heart of this productivity lies the longwall shearer, a massive mobile machine that travels back and forth along the coal face, cutting coal with rotating drums while advancing through seam heights ranging from 1.6 to 7 meters. The power cables supplying electricity to these shearers operate in one of the most mechanically demanding cable applications in industrial engineering, subjected to continuous motion within cable chain systems (often referred to as “Bretby chains”), constant vibration from cutting operations, tight bending radii as the shearer traverses the face, and the harsh environmental conditions characteristic of underground coal mining.[1] （长壁开采代表了现代采矿作业可用的最具生产力的地下煤炭开采方法，单个长壁工作面在优化安装中每小时可生产超过5000吨煤炭）
4 Min Read
PROTOMONT(V) NTSKCGECWOEU 3.6/6KV is a medium-voltage coal cutter cable designed for power supply connection to mobile equipment and machines in underground mining applications. The (V) Coal cutter cables are specifically engineered for use in cable protection chains (cable handler), which are trailed behind the machine and absorb the occurring tensile forces. Featuring very finely stranded tinned copper conductors (Class FS), EPR rubber insulation (PROTOLON 3GI3), semi-conductive NBR easy-strip layer, and polychloroprene outer sheath (PROTOFIRM 5GM5), with monitoring conductor (steel/Cu-tinned) for mine safety. Certified by MSHA, GOST-R, and Poland WUG.
Technical Department
on14/01/2026

كابل PROTOMONT(V) NTSKCGECWOEU 3,6/6KVكابلات قاطعات الفحم للتشغيل بسلاسل الحماية – التعدين تحت الأرض

Used as power supply connection cable for mobile equipment and machines in underground mining applications, such as coal cutting machines, etc. (V) Coal cutter cables are designed for use in cable protection chains (cable handler), which are trailed behind the machine and which absorb the thereby occurring tensile forces. Suitable for use in battery chains with extreme bending loads under low tensile stress.
5 Min Read
Type 7 Mining Cable to BS 6708
Technical Department
on15/11/2025

What is Type 7 Mining Cable to BS 6708?

Type 7 mining cables represent a critical category of flexible trailing cables designed specifically for the demanding conditions encountered in underground coal mining operations. These cables conform to the rigorous requirements established by British Standard BS 6708, which has become an internationally recognized benchmark for mining cable safety and performance. The standard was developed through decades of mining industry experience and addresses the unique electrical and mechanical challenges present in potentially explosive underground environments. According to BSI Knowledge, BS 6708 specifications establish comprehensive requirements for flexible cables used at mines and quarries, ensuring that these critical power transmission components meet stringent safety and performance criteria. The Type 7 designation specifically identifies non-armoured cables with individually metallic screened cores rated at 640/1100V, engineered for both fixed installation and flexible operation in coal face cutting equipment.