[email protected]

PROTOLON EPR insulation

4 Min Read
What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.
Technical Department
on10/06/2026

PROTOLON (M) R-(N)TSCGEWOEU LWL 3.6/6KV 至 18/30KV：集成光纤中压卷筒电缆全系列工程解析

PROTOLON (M) R-(N)TSCGEWOEU LWL 是一种集成光纤的中压卷筒电缆，适用于露天矿大型物料处理机械，例如大型挖掘机、自卸设备、移动破碎机，以及配合单螺旋卷筒和圆柱卷筒运行的高机械应力移动供电系统。当前资料覆盖 3.6/6KV、8.7/15KV、12/20KV 和 18/30KV 四个系列，均采用三芯中压结构、分裂接地导体、LWL / FO 光纤单元、PROTOLON EPR 绝缘、聚酯编织增强和 PCP 外护套
5 Min Read
FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)
Technical Department
on10/06/2026

PROTOLON (M) R-(N)TSCGEWOEU LWL 25KV / 35KV：集成光纤中压卷筒电缆工程解析

PROTOLON (M) R-(N)TSCGEWOEU LWL 是一种集成光纤的中压卷筒电缆，适用于露天矿大型物料处理机械，例如大型挖掘机、自卸设备、移动破碎机，以及配合单螺旋卷筒和圆柱卷筒运行的高机械应力移动供电系统。当前资料覆盖 25KV 与 35KV 两个系列，二者均采用三芯中压结构、分裂接地导体、光纤单元、PROTOLON EPR 绝缘、聚酯编织增强和 PCP 外护套
5 Min Read
Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables for port equipment, container terminals, and offshore platforms — from conductor architecture and EPR insulation to steel wire armour (M2) design rationale, galvanic corrosion protection mechanisms, environmental compliance, and validated performance benchmarking against Nexans Eproneo Port and Prysmian marine systems.
Technical Department
on10/06/2026

什么是 PROTOLON (M) R-(N)TSCGEWOEU LWL 6/10KV：集成光纤的高机械应力中压卷筒电缆工程解析

PROTOLON (M) R-(N)TSCGEWOEU LWL 6/10KV 是一种带集成光纤单元的中压卷筒电缆，适用于露天矿大型物料处理机械，例如挖掘机、自卸设备、移动破碎机，以及需要承受高机械应力的单螺旋卷筒和圆柱卷筒系统。它将 6/10 (12) kV 中压动力传输、分裂接地导体、光纤通信单元、聚酯编织增强和耐油、耐臭氧、耐 UV、耐海水外护套集成在同一柔性卷筒电缆结构中
5 Min Read
PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV is a coal cutter cable designed for free trailing operations in underground mining applications, used as power supply connection cable for mobile equipment such as coal shearers, roadheaders, TBMs, or scoops (LHDs). The (Z) Coal-Cutter cables are specifically designed for free trailing operation and, due to their special galvanized steel wire braiding construction, may be trailed for considerable distances behind the machine during operation. Features very finely stranded tinned copper conductors (Class FS), EPR rubber insulation (PROTOLON 3GI3), galvanized steel wire braiding armour, and polychloroprene (PCP) outer sheath (PROTOFIRM 5GM5). Offers up to 36,000N tensile strength and 150m/min travel speed. Certified by MSHA P-189-4, EAC, and Bosnia-Herzegovina BAS.
Technical Department
on14/01/2026

كابل PROTOMONT(Z) NSSHKCGEOEU 0,6/1KVكابلات قاطعات الفحم لعمليات السحب الحر – التعدين تحت الأرض

PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV 是專為地下採礦作業中的自由拖曳操作設計的採煤機電纜，用於連接採煤機、掘進機、隧道掘進機(TBM)或鏟運機(LHD)等移動設備。(Z)型採煤機電纜專為自由拖曳操作設計，由於其特殊的鍍鋅鋼絲編織結構，可在設備後方拖曳相當長的距離。該電纜採用極細絞鍍錫銅導體（FS類）、EPR橡膠絕緣（PROTOLON 3GI3）、鍍鋅鋼絲編織鎧裝、氯丁橡膠外護套（PROTOFIRM 5GM5）。具有高達36,000N的拉伸強度和150m/min的移動速度。獲得MSHA P-189-4、EAC及波黑BAS等國際認證。
5 Min Read
PROTOMONT(VO) (N)TSKCGEWOEU 1.8/3KV is a medium-voltage coal cutter cable designed for power supply connection to mobile equipment and machines in underground mining applications. The (VO) Coal cutter cables are specifically engineered for use in cable protection chains (cable handler), which are trailed behind the machine and absorb the occurring tensile forces. Featuring finely stranded tinned copper conductors (Class FS), EPR rubber insulation (PROTOLON 3GI3), semi-conductive NBR easy-strip layer, and chlorinated polyethylene (CM/CPE) outer sheath (PROTOFIRM >5GM5), with double-concentric control/PE conductor elements in the outer interstices. Certified by GOST-R/-K/-B (Russia) and MA China.
Technical Department
on14/01/2026

كابل PROTOMONT(VO) (N)TSKCGEWOEU 1,8/3KVكابلات قاطعات الفحم للتشغيل بسلاسل الحماية – التعدين تحت الأرض

Used as power supply connection cable for mobile equipment and machines in underground mining applications, such as coal cutting machines, etc. (VO) Coal cutter cables are designed for use in cable protection chains (cable handler), which are trailed behind the machine and which absorb the thereby occurring tensile forces. Suitable for shearer loaders, continuous miners, loading machines, shuttle cars, and other underground coal mining mobile equipment.
12 Min Read
What is PROTOMONT EMV-FC (N)SSHCOEU 1 kV for Variable Frequency Converter? Complete technical guide to EMC-optimized motor power supply cables for frequency converter controlled drives in mining, construction, and industrial applications | Anhui Feichun Special Cable Co., Ltd. (安徽飞纯特种电缆有限公司)
Technical Department
on21/11/2025

What is PROTOMONT EMV-FC (N)SSHCOEU (-45°C) 1 kV for Variable Frequency Converter?

PROTOMONT EMV-FC (N)SSHCOEU represents a specialized category of EMC-optimized rubber-sheathed flexible cables engineered specifically for motor power supply applications in Variable Frequency Drive (VFD) controlled systems. These cables address one of the most significant challenges in modern industrial power distribution: electromagnetic compatibility in high-frequency switching environments. Variable Frequency Drives have revolutionized motor control in mining, construction, and industrial applications by providing precise speed regulation and energy efficiency. However, VFDs also introduce unique electrical challenges. As noted by cable engineering specialists, VFDs require specialized cabling to ensure reliable operation, minimize electromagnetic interference, and maintain safety for the system as a whole, because selecting the right cables and proper installation directly impact performance and equipment longevity (source: KEB America). The PROTOMONT EMV-FC series specifically addresses these challenges through its EMC-optimized concentric braid screen design, making it the ideal choice for frequency converter controlled drives in the mining industry, on construction sites, and similar applications with heavy mechanical stresses.
16 Min Read
What is PROTOMONT EMV-FC (N)SSHCOEU 1 kV for Variable Frequency Converter? Complete technical guide to EMC-optimized motor power supply cables for frequency converter controlled drives in mining, construction, and industrial applications | Anhui Feichun Special Cable Co., Ltd. (安徽飞纯特种电缆有限公司)
Technical Department
on21/11/2025

What is PROTOMONT EMV-FC (N)SSHCOEU 1 kV for Variable Frequency Converter?

PROTOMONT EMV-FC (N)SSHCOEU represents a specialized category of EMC-optimized rubber-sheathed flexible cables engineered specifically for motor power supply applications in Variable Frequency Drive (VFD) controlled systems. These cables address one of the most significant challenges in modern industrial power distribution: electromagnetic compatibility in high-frequency switching environments. Variable Frequency Drives have revolutionized motor control in mining, construction, and industrial applications by providing precise speed regulation and energy efficiency. However, VFDs also introduce unique electrical challenges. As noted by cable engineering specialists, VFDs require specialized cabling to ensure reliable operation, minimize electromagnetic interference, and maintain safety for the system as a whole, because selecting the right cables and proper installation directly impact performance and equipment longevity (source: KEB America). The PROTOMONT EMV-FC series specifically addresses these challenges through its EMC-optimized concentric braid screen design, making it the ideal choice for frequency converter controlled drives in the mining industry, on construction sites, and similar applications with heavy mechanical stresses.
13 Min Read
What is PROTOMONT(MT) (N)SSHOEU 1 kV? Complete Technical Guide Comprehensive specifications, applications, safety standards, and technical parameters for heavy-duty rubber-sheathed flexible mining and tunneling cables | Anhui Feichun Special Cable Co., Ltd. (安徽飞纯特种电缆有限公司)
Technical Department
on21/11/2025

What is PROTOMONT(MT) (N)SSHOEU 1 kV? Complete Technical Guide

PROTOMONT(MT) (N)SSHOEU represents a specialized category of rubber-sheathed flexible cables engineered specifically for mining and tunneling applications where heavy mechanical stress is a constant operational challenge. These cables serve as essential power transmission components in some of the world’s most demanding industrial environments, from underground coal mines to surface excavation operations. Mining environments present unique challenges that standard industrial cables cannot withstand. As noted in industry research, mining cables must endure severe physical punishment including constant abrasion against rock surfaces, crushing forces from equipment, impacts from falling debris, and frequent flexing as mobile equipment moves. The PROTOMONT(MT) (N)SSHOEU cable line addresses these challenges through sophisticated engineering and advanced material selection. Manufactured in accordance with DIN VDE 0250 part 812 standards and carrying VDE-REG F546 certification, this cable represents the pinnacle of German engineering excellence applied to mining cable technology. The designation “(N)SSHOEU” provides valuable information about the cable’s construction characteristics, indicating compliance with national and international standards, special sheathing for severe service conditions, and European standard compliance.