![The operational profile of handheld drilling equipment demands cables that can withstand millions of flex cycles without mechanical or electrical failure. A handheld rock drill or roof bolter may be repositioned dozens of times per hour during active operation, with each repositioning imposing multiple flex cycles on the trailing cable. Over the lifetime of the cable, this translates to extreme flex cycle demands that far exceed those imposed on cables serving more stationary equipment. The AS/NZS 1802:2003 standard recognizes this requirement by specifying Type 209 cables as "more suitable as a trailing cable rather than for reeling" and noting that "smaller cables are used for drills and hand held tools and equipment."[9] （手持钻孔设备的操作特性要求电缆能够承受数百万次弯曲循环而不发生机械或电气故障）](https://feichuncables.com/blog/wp-content/uploads/image-663.avif "Hand-Held Borers: Why is Type 209 (Individually Screened) Mandatory for Handheld Drilling Equipment Instead of Type 275? 1")
Hand-Held Borers: Why is Type 209 (Individually Screened) Mandatory for Handheld Drilling Equipment Instead of Type 275?
The operational profile of handheld drilling equipment demands cables that can withstand millions of flex cycles without mechanical or electrical failure. A handheld rock drill or roof bolter may be repositioned dozens of times per hour during active operation, with each repositioning imposing multiple flex cycles on the trailing cable. Over the lifetime of the cable, this translates to extreme flex cycle demands that far exceed those imposed on cables serving more stationary equipment. The AS/NZS 1802:2003 standard recognizes this requirement by specifying Type 209 cables as “more suitable as a trailing cable rather than for reeling” and noting that “smaller cables are used for drills and hand held tools and equipment.”[9] （手持钻孔设备的操作特性要求电缆能够承受数百万次弯曲循环而不发生机械或电气故障）
