[email protected]

(N)TSCGEWÖU ATB [MEDIUM]

3 Min Read
Prysmian PROTOLON is a dedicated reeling cable product family manufactured specifically for ship-to-shore (STS) container cranes, rubber-tyred gantry (RTG) equipment, and fixed portal gantry cranes operating in port environments. The PROTOLON designation encompasses multiple voltage ratings and sheath variants optimized for the unique demands of container port operations: extreme torsional loading from reel wind/unwind cycles, exposure to saline spray and salt-laden atmospheres, exposure to direct ultraviolet radiation in open-air port environments, and continuous mechanical flexing over thousands of reel cycles. The cable is manufactured to IEC 60502-1 standards (identical to mining reeling cables) but with additional performance requirements specified in ISO 3384 (compression set limits), ASTM B117 (1000-hour salt fog resistance), and IEC 60811-2-2 (UV aging resistance). These additional requirements reflect the marine environment's specific hazards: salt fog causes accelerated outer sheath degradation in non-marine-optimized cables, and UV radiation polymerizes and hardens outer sheath materials, reducing flexibility and increasing brittleness over 5–8 year service periods.
Technical Department
on01/06/2026

解决采矿卷筒系统断点痛点：带 EAC 证书的 (N)TSCGEWÖU с оптоволокном 柔性卷筒电缆

飛纯光電複合方案的解決方式 飛纯的 (N)TSCGEWÖU с оптоволокном 電纜採用光纖通信。光信號在石英纖維中傳輸，完全隔離於電磁場。結果： ✅ 光電複合解決方案 光纖傳輸 100+ 個參數（卷筒速度、負載、溫度、傾斜、振動頻率），信號清晰無干擾，允許 2000m+ 超長距離無衰減。控制室能以 100ms 週期實時監控，立即發現異常（如負載突變、溫度升高），提前 30～60 分鐘預警軸承故障。
2 Min Read
FLEXIFESTOON® PV-FLAT UL: High-Flexibility Salt-Fog Resistant Flat Festoon Cable for Port Operations, Marine Equipment, and Harbor Automation Systems Feichun's FLEXIFESTOON® PV-FLAT UL establishes a new performance paradigm for port-duty electrical infrastructure by combining three critical engineering requirements into unified cable architecture: extreme mechanical flexibility enabling 5×D minimum bending radius and 120 m/min festoon deployment on container gantries and ship loaders; comprehensive salt-fog environmental resistance through specialized PVC compound formulation with enhanced corrosion inhibitors surviving ASTM B117 salt-spray testing protocols characteristic of extreme coastal and offshore environments; and verified 600V/2000V dual-voltage certification (UL 1581, CSA approved) supporting both power distribution and precision automation signal transmission across the world's most demanding port and maritime cargo-handling operations.
Technical Department
on01/06/2026

采矿设备卷筒系统防爆电缆：(N)TSCGEWÖU с оптоволокном 光电复合 (VDE 0250)

針對俄羅斯、白俄羅斯、全球採礦工程承包商的完整技術參考。本文解析飛纯電纜如何完美符合國際 (N)TSCGEWÖU FO（Fiber-Optic 光電複合）卷筒防爆電纜規範、DIN VDE 0250 標準，同時持有俄羅斯聯邦實驗室直接簽發的 EAC 防爆認証與 GOST 防火認証，為礦山提升機、深井卷筒、露天採礦設備提供光纖通信 + 高壓電源的一體化防爆解決方案。
2 Min Read
What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.
Technical Department
on01/06/2026

(N)TSCGEWÖU 矿用高压柔性电缆出口俄罗斯：俄罗斯实验室 EAC 防爆与 GOST 防火认证齐全

(N)TSCGEWÖU 是德國、奧地利、瑞士等中歐國家制定的礦用高壓柔性電纜規範，特別針對深井採礦、露天礦山與地下水電工程的高壓供電應用。與通用的 DIN VDE 0250 標準相比，(N)TSCGEWÖU 在以下方面進行了礦用特化： • 高壓耐受設計： 導體截面積更大（通常 50 mm² 至 400 mm²），絕緣厚度與抗拉強度針對 6～35 kV 操作進行優化 • 機械耐久性： 外皮厚度加強至 6.0～8.0 mm，防磨損編織層更堅固，應對採礦現場的石塊、礦機械設備的反覆接觸 • 防水與防化學： 絕緣與外皮具有卓越的防水滲透與油脂抵抗，應對地下水環境與礦區液氮、切割液污染 • 防火與安全： 要求達到 GOST 12.1.044-89 Group 2 或更高防火等級，確保地下採礦環境中的火災隔離與人員安全 對於計畫從事礦山設備出口到俄羅斯、白俄羅斯、中亞或全球採礦工程項目的中國製造商而言，(N)TSCGEWÖU + EAC 防爆 + GOST 防火的三重認証組合意味著「全球頂級礦用電纜的專業資格」。
8 Min Read
Mining, drilling, and tunnelling cables represent the most demanding category of industrial cables, designed to operate in some of the harshest environments on earth. These heavy-duty power, control, and instrumentation cables serve mine operators worldwide for both static infrastructure and dynamic equipment applications. Manufactured in accordance with international standards including IEC 60502, BS EN 60332, BS EN 60811, BS EN 60754, and VDE 0295, mining cables must withstand mechanical stress, oil and grease exposure, water immersion, and in underground applications, provide critical fire safety through reduced smoke and fume emissions.
Technical Department
on05/01/2026

What are Mining, Drilling & Tunnelling Cables?

NSSHÖU cable, NSSHOU cable, NSHÖU cable, NSHOU cable, NSSCHOU cable, NSHTÖU cable, NTSCGEWÖU cable, NTSCGEWOU cable, NTMCGEWÖU cable, N3GHSSYCY cable, N3GHSSHCH cable,Type 61 cable, Type 63 cable, Type 611 cable, Type 622 cable, Type 633 cable, Type 66 cable,Type 240 cable, Type 241 cable, Type 245 cable, Type 450 cable, Type 455 cable, Type 260 cable, Type 275 cable, Type 409 cable, Type 440 cable, Type 441 cable,