[email protected]

heavy duty PUR cable

12 Min Read
Full technical breakdown Prysmian Draka BUFLEX XTREME 3×70+3×35/3 0.6/1 kV: specialized low-voltage reeling cable for mining excavators, drill rigs, draglines, and conveyors in open-pit and underground mining. Construction: 3 power cores 70 mm² (class 5 flexible copper) + 3 earth cores 35 mm² + 3 pilot/control cores, XLPE insulation 90°C, PUR outer sheath (oil/abrasion resistant, Shore A ~85–92), aramid (Kevlar) strength member for extreme mechanical stress: torsion ±360°/m, tension up to 5,000 N, abrasion >50,000 cycles. Operating temperature -35°C to +90°C standard, -40°C extended. Reeling speed up to 150 m/min. Minimum bending radius 6× OD. VDE 0250-812 certified. Russian GOST equivalent: КГЭ-Ш 0.6/1 kV (Flexible Shielded Mining Cable) per GOST 31945-2012 with additional aramid element and PUR sheath. Applications: open-pit (Kuzbass coal, Kursk Magnetic Anomaly iron ore, Ural copper), underground (Vorkuta coal, Perm potash). Cost: original BUFLEX XTREME €1,800–2,400/km vs Feichun FC-BUFLEX-XT €650–850/km (55–65% savings). Long-term import substitution strategy for Russian mining industry.
Technical Department
on16/03/2026

Draka BUFLEX XTREME 3×70+3×35/3 0.6/1кВ: гибкий барабанный кабель для горнодобывающих экскаваторов, КГЭ-Ш русский аналог и производство FeiChun Cable

Full technical breakdown Prysmian Draka BUFLEX XTREME 3×70+3×35/3 0.6/1 kV: specialized low-voltage reeling cable for mining excavators, drill rigs, draglines, and conveyors in open-pit and underground mining. Construction: 3 power cores 70 mm² (class 5 flexible copper) + 3 earth cores 35 mm² + 3 pilot/control cores, XLPE insulation 90°C, PUR outer sheath (oil/abrasion resistant, Shore A ~85–92), aramid (Kevlar) strength member for extreme mechanical stress: torsion ±360°/m, tension up to 5,000 N, abrasion >50,000 cycles. Operating temperature -35°C to +90°C standard, -40°C extended. Reeling speed up to 150 m/min. Minimum bending radius 6× OD. VDE 0250-812 certified. Russian GOST equivalent: КГЭ-Ш 0.6/1 kV (Flexible Shielded Mining Cable) per GOST 31945-2012 with additional aramid element and PUR sheath. Applications: open-pit (Kuzbass coal, Kursk Magnetic Anomaly iron ore, Ural copper), underground (Vorkuta coal, Perm potash). Cost: original BUFLEX XTREME €1,800–2,400/km vs Feichun FC-BUFLEX-XT €650–850/km (55–65% savings). Long-term import substitution strategy for Russian mining industry.
2 Min Read
The Design Temperature Assumption: AS/NZS 1802 mining cable standards were developed for Australian and New Zealand mining conditions, where minimum ambient temperatures rarely drop below -10°C to -15°C. The standard's base material specifications (PCP chloroprene jacket, standard EPR insulation) were formulated for this relatively temperate range. A cable certified to AS/NZS 1802 specifications is guaranteed to function correctly from 0°C to 60°C (typical service range), with an operating floor around -20°C at absolute minimum. AS/NZS 1802矿用电缆标准是为澳大利亚和新西兰矿业条件而开发的，最低环境温度很少低于-10°C至-15°C。该标准的基础材料规范(PCP氯丁橡胶护套、标准EPR绝缘)针对这个相对温暖的范围而配制。根据AS/NZS 1802规范认证的电缆保证在0°C至60°C范围内正确工作，绝对最低工作温度约为-20°C。
Technical Department
on06/03/2026

Cold Bend Performance: Modifying AS/NZS Mining Cables for -40°C Operation in Mongolia

The Design Temperature Assumption: AS/NZS 1802 mining cable standards were developed for Australian and New Zealand mining conditions, where minimum ambient temperatures rarely drop below -10°C to -15°C. The standard’s base material specifications (PCP chloroprene jacket, standard EPR insulation) were formulated for this relatively temperate range. A cable certified to AS/NZS 1802 specifications is guaranteed to function correctly from 0°C to 60°C (typical service range), with an operating floor around -20°C at absolute minimum. AS/NZS 1802矿用电缆标准是为澳大利亚和新西兰矿业条件而开发的，最低环境温度很少低于-10°C至-15°C。该标准的基础材料规范(PCP氯丁橡胶护套、标准EPR绝缘)针对这个相对温暖的范围而配制。根据AS/NZS 1802规范认证的电缆保证在0°C至60°C范围内正确工作，绝对最低工作温度约为-20°C。