[email protected]

fail-safe cable

8 Min Read
The selection of industrial power cables represents one of the most critical engineering decisions in drilling operations, whether on land or offshore. Two cable types dominate this application space: the Type SHD-GC （重型屏蔽接地检查电缆）, designed primarily for mobile mining and terrestrial drilling equipment, and the Type P （海洋平台电缆）, engineered specifically for harsh offshore and fixed platform environments. Though both cables operate at similar voltage ratings, they embody fundamentally different design philosophies that reflect the distinct mechanical, electrical, and safety demands of their respective application domains.
Technical Department
on25/02/2026

Type SHD-GC vs. Type P: Selecting the Right Trailing Cable for Land and Offshore Drilling 

The selection of industrial power cables represents one of the most critical engineering decisions in drilling operations, whether on land or offshore. Two cable types dominate this application space: the Type SHD-GC （重型屏蔽接地检查电缆）, designed primarily for mobile mining and terrestrial drilling equipment, and the Type P （海洋平台电缆）, engineered specifically for harsh offshore and fixed platform environments. Though both cables operate at similar voltage ratings, they embody fundamentally different design philosophies that reflect the distinct mechanical, electrical, and safety demands of their respective application domains.
5 Min Read
British Standard BS8436 specifies requirements for multicore electric cables with low emissions of smoke and corrosive gases when subjected to fire. The standard covers 2-core, 3-core, and 4-core cables with an uninsulated full-size circuit protective conductor of tinned annealed copper and metallic screening. These cables are specifically designed for use in building voids, partitions and walls where there is a risk of damage or penetration from nails, screw fixings, and similar fasteners.
Technical Department
on22/12/2025

What is BS8436 Standard Cable?

British Standard BS8436 specifies requirements for multicore electric cables with low emissions of smoke and corrosive gases when subjected to fire. The standard covers 2-core, 3-core, and 4-core cables with an uninsulated full-size circuit protective conductor of tinned annealed copper and metallic screening. These cables are specifically designed for use in building voids, partitions and walls where there is a risk of damage or penetration from nails, screw fixings, and similar fasteners.