Comprehensive professional guide to the TYPE 240-LED — an AS/NZS 1802:2003 certified power supply cable for underground coal mining with integrated self-powered LED illumination and composite copper/polyester braid insulation screening. In FeiChun's AS/NZS 1802 illuminated cable range, the TYPE 240-LED fills a specific and important niche: power supply applications where earth-fault current capacity and electromagnetic compatibility (EMC) are critical requirements. Where the TYPE 241-LED (flagship) uses a semi-conductive elastomeric screen for maximum FC-EMH™ induction efficiency, the TYPE 240-LED uses a composite copper/polyester braid screen that delivers superior earth-fault current-carrying capacity and better EMC shielding — essential for feeding longwall variable-speed drives (VSDs), AFC drives with sensitive PLC control systems, and any underground coal equipment where electromagnetic interference could compromise safety-critical control electronics. FeiChun's engineering team has developed a braid-compensated FC-EMH™ coil geometry specifically for the Type 240 construction, overcoming the 25–30% magnetic-field attenuation caused by the copper braid's eddy-current shielding to deliver reliable LED illumination at all normal operating loads. The proprietary FC-TPU™ P-Series sheath (Formula FC-2026-TPU-P4) is optimised for the semi-permanent static deployment typical of power supply cables — resisting flat-spotting, creep, and long-term degradation during prolonged installation along gate roads. This article covers cable construction, the braid screen vs elastomeric screen trade-off, braid-compensated energy harvesting, four-layer surge protection, complete dimensional and electrical data across all four voltage classes (1.1–11 kV, 33 part numbers), standards compliance, application scenarios, product selection against the TYPE 241-LED, and direct factory procurement.

on19/03/2026

TYPE 240-LED: AS/NZS 1802 Certified Self-Powered LED Illuminated Power Supply Cable for Underground Coal Mining

Comprehensive professional guide to the TYPE 240-LED — an AS/NZS 1802:2003 certified power supply cable for underground coal mining with integrated self-powered LED illumination and composite copper/polyester braid insulation screening. In FeiChun’s AS/NZS 1802 illuminated cable range, the TYPE 240-LED fills a specific and important niche: power supply applications where earth-fault current capacity and electromagnetic compatibility (EMC) are critical requirements. Where the TYPE 241-LED (flagship) uses a semi-conductive elastomeric screen for maximum FC-EMH™ induction efficiency, the TYPE 240-LED uses a composite copper/polyester braid screen that delivers superior earth-fault current-carrying capacity and better EMC shielding — essential for feeding longwall variable-speed drives (VSDs), AFC drives with sensitive PLC control systems, and any underground coal equipment where electromagnetic interference could compromise safety-critical control electronics. FeiChun’s engineering team has developed a braid-compensated FC-EMH™ coil geometry specifically for the Type 240 construction, overcoming the 25–30% magnetic-field attenuation caused by the copper braid’s eddy-current shielding to deliver reliable LED illumination at all normal operating loads. The proprietary FC-TPU™ P-Series sheath (Formula FC-2026-TPU-P4) is optimised for the semi-permanent static deployment typical of power supply cables — resisting flat-spotting, creep, and long-term degradation during prolonged installation along gate roads. This article covers cable construction, the braid screen vs elastomeric screen trade-off, braid-compensated energy harvesting, four-layer surge protection, complete dimensional and electrical data across all four voltage classes (1.1–11 kV, 33 part numbers), standards compliance, application scenarios, product selection against the TYPE 241-LED, and direct factory procurement.

Comprehensive professional guide to the TYPE 241-LED — FeiChun's flagship illuminated mining cable and the most versatile LED-equipped cable certified to AS/NZS 1802:2003 for underground coal mining. With 45 part numbers spanning 1.1 kV through 22 kV, the TYPE 241-LED covers virtually every underground coal feeder and trailing application: continuous miner trailing cables, longwall shearer power feeders, AFC drive feeders, BSL feeders, panel pump cables, and mobile substation HV incoming supply — all with self-powered LED visibility that requires no external DC supplies, no gate end box modifications, and no coupler changes. Where FeiChun's TYPE 275-LED serves shuttle-car reeling duty and the TYPE 260-LED serves armoured feeder duty, the TYPE 241-LED is the workhorse general-purpose illuminated cable for continuous miners and longwall systems — the machines that do the actual cutting and haulage at the coalface. The proprietary FC-TPU™ C-Series sheath (Formula FC-2026-TPU-C1) is specifically formulated for the crushing loads continuous miners and shuttle cars impose when they run over trailing feeders. The semi-conductive elastomeric screen is magnetically transparent, giving the FC-EMH™ induction system 15–20% higher coupling efficiency than braid-screened cables — critical for maintaining reliable LED illumination at partial continuous-miner load or longwall shearer idle. This article covers cable construction, dual energy harvesting architecture, FC-TPU™ C-Series crushing-resistant sheath, four-layer surge protection, complete dimensional and electrical data across all five voltage classes, full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for continuous miners and longwall systems, product selection versus the TYPE 260-LED and TYPE 275-LED, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

Technical Department

on19/03/2026

TYPE 241-LED: FeiChun’s Flagship AS/NZS 1802 Certified Self-Powered LED Illuminated Mining Cable for Continuous Miners, Longwall Shearers & Underground Coal Production

Comprehensive professional guide to the TYPE 241-LED — FeiChun’s flagship illuminated mining cable and the most versatile LED-equipped cable certified to AS/NZS 1802:2003 for underground coal mining. With 45 part numbers spanning 1.1 kV through 22 kV, the TYPE 241-LED covers virtually every underground coal feeder and trailing application: continuous miner trailing cables, longwall shearer power feeders, AFC drive feeders, BSL feeders, panel pump cables, and mobile substation HV incoming supply — all with self-powered LED visibility that requires no external DC supplies, no gate end box modifications, and no coupler changes. Where FeiChun’s TYPE 275-LED serves shuttle-car reeling duty and the TYPE 260-LED serves armoured feeder duty, the TYPE 241-LED is the workhorse general-purpose illuminated cable for continuous miners and longwall systems — the machines that do the actual cutting and haulage at the coalface. The proprietary FC-TPU™ C-Series sheath (Formula FC-2026-TPU-C1) is specifically formulated for the crushing loads continuous miners and shuttle cars impose when they run over trailing feeders. The semi-conductive elastomeric screen is magnetically transparent, giving the FC-EMH™ induction system 15–20% higher coupling efficiency than braid-screened cables — critical for maintaining reliable LED illumination at partial continuous-miner load or longwall shearer idle. This article covers cable construction, dual energy harvesting architecture, FC-TPU™ C-Series crushing-resistant sheath, four-layer surge protection, complete dimensional and electrical data across all five voltage classes, full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for continuous miners and longwall systems, product selection versus the TYPE 260-LED and TYPE 275-LED, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

[email protected]

direct factory mining cable Australia