[email protected]

dielectric strength test

10 Min Read
High Tension (HT) cables are specialized power distribution cables designed for reel-mounted applications in port equipment—primarily unloaders, stackers, reclaimers, and gantry cranes. The term "high tension" does not refer to electrical voltage (HT cables are 0.6/1 kV, standard port equipment voltage); instead, it refers to the mechanical tension and stress that these cables experience when wound on reels and unwound during equipment operation. HT-PNCT cables serve as the primary power supply line running from the equipment's fixed power source (shore power or generator) to the reel-mounted slip ring assembly on moving equipment. During operation, these cables are repeatedly wound onto and unwound from rotating reels, experiencing: • Tensile stress from the cable's own weight as it hangs from the reel to the equipment • Bending stress each time the cable wraps around the reel drum • Mechanical abrasion from friction against the reel surface and cable guides • Environmental exposure to saltwater spray, UV radiation, and thermal cycling Standard festoon cables (like FC-PNCT) are optimized for relatively stationary installations. HT-PNCT cables are engineered specifically for reel-wound, dynamic applications where these mechanical stresses dominate the cable's service life.
Technical Department
on13/04/2026

HT-PNCT High Tension Cables

High Tension (HT) cables are specialized power distribution cables designed for reel-mounted applications in port equipment—primarily unloaders, stackers, reclaimers, and gantry cranes. The term “high tension” does not refer to electrical voltage (HT cables are 0.6/1 kV, standard port equipment voltage); instead, it refers to the mechanical tension and stress that these cables experience when wound on reels and unwound during equipment operation. HT-PNCT cables serve as the primary power supply line running from the equipment’s fixed power source (shore power or generator) to the reel-mounted slip ring assembly on moving equipment. During operation, these cables are repeatedly wound onto and unwound from rotating reels, experiencing: • Tensile stress from the cable’s own weight as it hangs from the reel to the equipment • Bending stress each time the cable wraps around the reel drum • Mechanical abrasion from friction against the reel surface and cable guides • Environmental exposure to saltwater spray, UV radiation, and thermal cycling Standard festoon cables (like FC-PNCT) are optimized for relatively stationary installations. HT-PNCT cables are engineered specifically for reel-wound, dynamic applications where these mechanical stresses dominate the cable’s service life.
30 Min Read
SUPROMONT (N)3GHSSYCY 6 kV – 30 kV Medium Voltage Mining Cable: Technical Guide for Transformer and Shiftable Equipment Applications
Technical Department
on24/11/2025

SUPROMONT (N)3GHSSYCY 6 kV – 30 kV

The evolution of underground mining operations toward increasingly mechanized production methods and deeper extraction depths has driven corresponding evolution in electrical infrastructure requirements, progressively expanding from early kilowatt-scale low voltage systems toward modern megawatt-scale installations requiring medium voltage power distribution. The fundamental electrical engineering principle underlying this evolution recognizes that power transmission capacity equals voltage multiplied by current, enabling equivalent power delivery at substantially reduced current levels through voltage increase from conventional low voltage levels of six hundred sixty to one thousand one hundred forty volts to medium voltage levels ranging from three point six kilovolts to thirty kilovolts. This current reduction delivers multiple operational advantages including proportional reduction in conductor cross-sectional area requirements decreasing cable weight and installation cost, reduced resistive losses improving energy efficiency and decreasing cooling requirements, and enhanced power quality through reduced voltage drop across transmission distances extending hundreds of meters or kilometers in modern mining operations.